Making SIS900 driver for net branch compileable

git-svn-id: svn://kolibrios.org@2304 a494cfbc-eb01-0410-851d-a64ba20cac60
This commit is contained in:
hidnplayr 2011-11-08 17:24:46 +00:00
parent 292477fb7c
commit 92f2253d7a

View File

@ -430,12 +430,16 @@ ret
align 4 align 4
probe: probe:
stdcall PciWrite8, dword [device.pci_bus], dword [device.pci_dev], 0x40, 0 ; Wake Up Chip movzx eax, [device.pci_bus]
movzx edx, [device.pci_dev]
stdcall PciWrite8, eax, edx, 0x40, 0 ; Wake Up Chip
make_bus_master [device.pci_bus], [device.pci_dev] make_bus_master [device.pci_bus], [device.pci_dev]
; Get Card Revision ; Get Card Revision
stdcall PciRead8, dword [device.pci_bus], dword [device.pci_dev], 0x08 movzx eax, [device.pci_bus]
movzx edx, [device.pci_dev]
stdcall PciRead8, eax, edx, 0x08
mov [device.pci_revision], al ; save the revision for later use mov [device.pci_revision], al ; save the revision for later use
; Look up through the specific_table ; Look up through the specific_table
@ -456,28 +460,28 @@ probe:
; Find Get Mac Function ; Find Get Mac Function
.ok: .ok:
mov eax, [esi+4] ; Get pointer to "get MAC" function mov eax, [esi+4] ; Get pointer to "get MAC" function
mov [get_mac_func], eax mov [device.get_MAC], eax
mov eax, [esi+8] ; Get pointer to special initialization fn mov eax, [esi+8] ; Get pointer to special initialization fn
mov [special_func], eax mov [device.special_func], eax
; Get MAC ; Get MAC
call [get_mac_func] call [device.get_MAC]
; Call special initialization fn if requested ; Call special initialization fn if requested
cmp [special_func],0 cmp [device.special_func],0
je @f je @f
call [special_func] call [device.special_func]
@@: @@:
; Set table entries ; Set table entries
mov byte [table_entries], 16 mov [device.table_entries], 16
cmp [pci_revision], SIS635A_900_REV cmp [device.pci_revision], SIS635A_900_REV
jae @f jae @f
cmp [pci_revision], SIS900B_900_REV cmp [device.pci_revision], SIS900B_900_REV
je @f je @f
mov byte [table_entries], 8 mov [device.table_entries], 8
@@: @@:
; TODO: Probe for mii transceiver ; TODO: Probe for mii transceiver
@ -571,9 +575,9 @@ reset:
set_io cfg set_io cfg
mov eax, PESEL ; Configuration Register Bit mov eax, PESEL ; Configuration Register Bit
cmp [pci_revision], SIS635A_900_REV cmp [device.pci_revision], SIS635A_900_REV
je .match je .match
cmp [pci_revision], SIS900B_900_REV ; Check card revision cmp [device.pci_revision], SIS900B_900_REV ; Check card revision
je .match je .match
out dx, eax ; no revision match out dx, eax ; no revision match
jmp .done jmp .done
@ -797,7 +801,7 @@ set_rx_mode:
out dx, ax ; write value to table in card out dx, ax ; write value to table in card
inc cl ; next entry inc cl ; next entry
cmp cl, [table_entries] cmp cl, [device.table_entries]
jl .loop jl .loop
;------------------------------------ ;------------------------------------
@ -921,7 +925,7 @@ SIS960_get_mac_addr:
; ;
;*************************************************************************** ;***************************************************************************
align 4 align 4
get_mac_addr: SIS900_get_mac_addr:
;------------------------------------ ;------------------------------------
; check to see if we have sane EEPROM ; check to see if we have sane EEPROM
@ -940,14 +944,14 @@ get_mac_addr:
mov ecx, 2 mov ecx, 2
.loop: .loop:
mov eax, EEPROMMACAddr ;Base Mac Address mov eax, EEPROMMACAddr ; Base Mac Address
add eax, ecx ;Current Mac Byte Offset add eax, ecx ; Current Mac Byte Offset
push ecx push ecx
call read_eeprom ;try to read 16 bits call read_eeprom ; try to read 16 bits
pop ecx pop ecx
mov word [device.mac+ecx*2], ax ;save 16 bits to the MAC ID storage mov word [device.mac+ecx*2], ax ; save 16 bits to the MAC ID storage
dec ecx ;one less word to read dec ecx ; one less word to read
jns mac_read_loop ;if more read more jns .loop ; if more read more
DEBUGF 2,"%x-%x-%x-%x-%x-%x\n",[device.mac]:2,[device.mac+1]:2,[device.mac+2]:2,[device.mac+3]:2,[device.mac+4]:2,[device.mac+5]:2 DEBUGF 2,"%x-%x-%x-%x-%x-%x\n",[device.mac]:2,[device.mac+1]:2,[device.mac+2]:2,[device.mac+3]:2,[device.mac+4]:2,[device.mac+5]:2
@ -1213,25 +1217,30 @@ int_handler:
.error_status: .error_status:
DEBUGF 1, "Packet error: %x\n", ecx DEBUGF 1, "Packet error: %x\n", ecx
jmp .continue jmp .fail
.error_size: .error_size:
DEBUGF 1, "Packet too large/small\n" DEBUGF 1, "Packet too large/small\n"
jmp .continue jmp .fail
.no_rx: .no_rx:
test ax, TxOk ;; test ax, TxOk
jz .no_tx ;; jz .no_tx
;;; TODO: free all unused buffers ;;; TODO: free all unused buffers
stdcall KernelFree, eax ;; stdcall KernelFree, eax
.no_tx: .no_tx:
ret ret
.fail:
DEBUGF 1, "FAILED\n"
jmp $
ret
;*************************************************************************** ;***************************************************************************
; Function ; Function
@ -1249,10 +1258,10 @@ align 4
transmit: transmit:
cmp dword [esp+8], MAX_ETH_FRAME_SIZE cmp dword [esp+8], MAX_ETH_FRAME_SIZE
jg transmit_finish ja .finish
cmp dword [esp+8], 60 cmp dword [esp+8], 60
jl transmit_finish jb .finish
movzx ecx, [device.cur_tx] movzx ecx, [device.cur_tx]
shl ecx, 4 shl ecx, 4
@ -1276,6 +1285,8 @@ transmit:
add dword [device.bytes_tx], ecx add dword [device.bytes_tx], ecx
adc dword [device.bytes_tx+4], 0 adc dword [device.bytes_tx+4], 0
.finish:
ret 8 ret 8
@ -1293,7 +1304,7 @@ specific_table:
dd SIS630ET_900_REV,Get_Mac_SIS635_900_REV,0;SIS630ET_900_REV_SpecialFN dd SIS630ET_900_REV,Get_Mac_SIS635_900_REV,0;SIS630ET_900_REV_SpecialFN
dd SIS635A_900_REV,Get_Mac_SIS635_900_REV,0 dd SIS635A_900_REV,Get_Mac_SIS635_900_REV,0
dd SIS900_960_REV,SIS960_get_mac_addr,0 dd SIS900_960_REV,SIS960_get_mac_addr,0
dd SIS900B_900_REV,get_mac_addr,0 dd SIS900B_900_REV,SIS900_get_mac_addr,0
dd 0 ; end of list dd 0 ; end of list
version dd (DRIVER_VERSION shl 16) or (API_VERSION and 0xFFFF) version dd (DRIVER_VERSION shl 16) or (API_VERSION and 0xFFFF)