mirror of
https://github.com/KolibriOS/kolibrios.git
synced 2024-11-25 10:19:36 +03:00
Some bugfixes in RTL8169 driver for net branch.
git-svn-id: svn://kolibrios.org@1557 a494cfbc-eb01-0410-851d-a64ba20cac60
This commit is contained in:
hidnplayr
parent
0503ca2897
commit
00d5a0b321
@ -236,34 +236,24 @@ PCFG_METHOD_1 equ 0x01 ; PHY Reg 0x03 bit0-3 == 0x0000
|
||||
PCFG_METHOD_2 equ 0x02 ; PHY Reg 0x03 bit0-3 == 0x0001
|
||||
PCFG_METHOD_3 equ 0x03 ; PHY Reg 0x03 bit0-3 == 0x0002
|
||||
|
||||
PCI_COMMAND_IO equ 0x1 ; Enable response in I/O space
|
||||
PCI_COMMAND_MEM equ 0x2 ; Enable response in mem space
|
||||
PCI_COMMAND_MASTER equ 0x4 ; Enable bus mastering
|
||||
PCI_LATENCY_TIMER equ 0x0d ; 8 bits
|
||||
PCI_COMMAND_SPECIAL equ 0x8 ; Enable response to special cycles
|
||||
PCI_COMMAND_INVALIDATE equ 0x10 ; Use memory write and invalidate
|
||||
PCI_COMMAND_VGA_PALETTE equ 0x20 ; Enable palette snooping
|
||||
PCI_COMMAND_PARITY equ 0x40 ; Enable parity checking
|
||||
PCI_COMMAND_WAIT equ 0x80 ; Enable address/data stepping
|
||||
PCI_COMMAND_SERR equ 0x100 ; Enable SERR
|
||||
PCI_COMMAND_FAST_BACK equ 0x200 ; Enable back-to-back writes
|
||||
|
||||
virtual at 0
|
||||
tx_desc:
|
||||
.status dd ?
|
||||
.vlan_tag dd ?
|
||||
.buf_addr dd ?
|
||||
.buf_Haddr dd ?
|
||||
.buf_addr dq ?
|
||||
.size = $
|
||||
rb (NUM_TX_DESC-1)*tx_desc.size
|
||||
.buf_soft_addr dd ?
|
||||
end virtual
|
||||
|
||||
virtual at 0
|
||||
rx_desc:
|
||||
.status dd ?
|
||||
.vlan_tag dd ?
|
||||
.buf_addr dd ?
|
||||
.buf_Haddr dd ?
|
||||
.buf_addr dq ?
|
||||
.size = $
|
||||
rb (NUM_RX_DESC-1)*rx_desc.size
|
||||
.buf_soft_addr dd ?
|
||||
end virtual
|
||||
|
||||
virtual at ebx
|
||||
@ -289,11 +279,11 @@ virtual at ebx
|
||||
.TxDescArray dd ? ; Index of 256-alignment Tx Descriptor buffer
|
||||
.RxDescArray dd ? ; Index of 256-alignment Rx Descriptor buffer
|
||||
|
||||
rb 255-(($ - ebx) and 255) ; align 256
|
||||
tx_ring rb NUM_TX_DESC * tx_desc.size
|
||||
rb 256-(($ - device) and 255) ; align 256
|
||||
tx_ring rb NUM_TX_DESC * tx_desc.size * 2
|
||||
|
||||
rb 255-(($ - ebx) and 255) ; align 256
|
||||
rx_ring rb NUM_RX_DESC * rx_desc.size
|
||||
rb 256-(($ - device) and 255) ; align 256
|
||||
rx_ring rb NUM_RX_DESC * rx_desc.size * 2
|
||||
|
||||
device_size = $ - device
|
||||
|
||||
@ -330,14 +320,13 @@ macro READ_GMII_REG RegAddr {
|
||||
|
||||
local .error, .done
|
||||
|
||||
mov eax, RegAddr shl 16
|
||||
set_io REG_PHYAR
|
||||
in eax, dx
|
||||
mov eax, RegAddr shl 16
|
||||
out dx, eax
|
||||
|
||||
call PHY_WAIT
|
||||
jz .error
|
||||
|
||||
set_io REG_PHYAR
|
||||
in eax, dx
|
||||
and eax, 0xFFFF
|
||||
jmp .done
|
||||
@ -354,7 +343,7 @@ PHY_WAIT: ; io addr must already be set to REG_PHYAR
|
||||
|
||||
push ecx
|
||||
mov ecx, 2000
|
||||
; Check if the RTL8169 has completed writing to the specified MII register
|
||||
; Check if the RTL8169 has completed writing/reading to the specified MII register
|
||||
@@:
|
||||
in eax, dx
|
||||
test eax, 0x80000000
|
||||
@ -456,12 +445,7 @@ proc service_proc stdcall, ioctl:dword
|
||||
cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card
|
||||
jge .fail
|
||||
|
||||
push edx
|
||||
stdcall KernelAlloc, device_size ; Allocate the buffer for eth_device structure
|
||||
pop edx
|
||||
test eax, eax
|
||||
jz .fail
|
||||
mov ebx, eax ; ebx is always used as a pointer to the structure (in driver, but also in kernel code)
|
||||
allocate_and_clear ebx, device_size, .fail ; Allocate memory to put the device structure in
|
||||
|
||||
; Fill in the direct call addresses into the struct
|
||||
|
||||
@ -689,11 +673,11 @@ probe:
|
||||
; wait for auto-negotiation process
|
||||
@@: dec ecx
|
||||
jz @f
|
||||
set_io 0
|
||||
READ_GMII_REG PHY_STAT_REG
|
||||
udelay 100
|
||||
test eax, PHY_Auto_Neco_Comp
|
||||
jz @b
|
||||
set_io 0
|
||||
set_io REG_PHYstatus
|
||||
in al, dx
|
||||
jmp @f
|
||||
@ -730,7 +714,6 @@ reset:
|
||||
mov [device.mtu], 1500
|
||||
|
||||
xor eax, eax
|
||||
|
||||
ret
|
||||
|
||||
|
||||
@ -744,6 +727,7 @@ PHY_config:
|
||||
|
||||
cmp [tpc.mcfg], MCFG_METHOD_04
|
||||
jne .not_4
|
||||
set_io 0
|
||||
; WRITE_GMII_REG 0x1F, 0x0001
|
||||
; WRITE_GMII_REG 0x1b, 0x841e
|
||||
; WRITE_GMII_REG 0x0e, 0x7bfb
|
||||
@ -757,7 +741,9 @@ PHY_config:
|
||||
je @f
|
||||
cmp [tpc.mcfg], MCFG_METHOD_03
|
||||
jne .not_2_or_3
|
||||
@@: WRITE_GMII_REG 0x1F, 0x0001
|
||||
@@:
|
||||
set_io 0
|
||||
WRITE_GMII_REG 0x1F, 0x0001
|
||||
WRITE_GMII_REG 0x15, 0x1000
|
||||
WRITE_GMII_REG 0x18, 0x65C7
|
||||
WRITE_GMII_REG 0x04, 0x0000
|
||||
@ -850,14 +836,16 @@ init_ring:
|
||||
|
||||
mov edi, [tpc.RxDescArray]
|
||||
mov ecx, NUM_RX_DESC
|
||||
@@:
|
||||
stdcall KernelAlloc, 2048
|
||||
mov [edi + rx_desc.buf_Haddr], eax
|
||||
GetRealAddr
|
||||
mov [edi + rx_desc.buf_addr], eax
|
||||
.loop:
|
||||
push ecx
|
||||
stdcall KernelAlloc, RX_BUF_SIZE
|
||||
mov [edi + rx_desc.buf_soft_addr], eax
|
||||
call GetPgAddr
|
||||
mov dword [edi + rx_desc.buf_addr], eax
|
||||
mov [edi + rx_desc.status], DSB_OWNbit or RX_BUF_SIZE
|
||||
add edi, rx_desc.size
|
||||
loop @b
|
||||
pop ecx
|
||||
loop .loop
|
||||
or [edi - rx_desc.size + rx_desc.status], DSB_EORbit
|
||||
|
||||
ret
|
||||
@ -972,6 +960,7 @@ hw_start:
|
||||
|
||||
call set_rx_mode
|
||||
|
||||
set_io 0
|
||||
; no early-rx interrupts
|
||||
set_io REG_MultiIntr
|
||||
in ax, dx
|
||||
@ -993,7 +982,7 @@ read_mac:
|
||||
set_io 0
|
||||
set_io REG_MAC0
|
||||
xor ecx, ecx
|
||||
lea esi, [device.mac]
|
||||
lea edi, [device.mac]
|
||||
mov ecx, MAC_ADDR_LEN
|
||||
|
||||
; Get MAC address. FIXME: read EEPROM
|
||||
@ -1048,15 +1037,15 @@ transmit:
|
||||
;---------------------------
|
||||
; Program the packet pointer
|
||||
|
||||
mov eax, [esp]
|
||||
mov [esi + tx_desc.buf_Haddr], eax
|
||||
mov eax, [esp + 4]
|
||||
mov [esi + tx_desc.buf_soft_addr], eax
|
||||
GetRealAddr
|
||||
mov [esi + tx_desc.buf_addr], eax
|
||||
mov dword [esi + tx_desc.buf_addr], eax
|
||||
|
||||
;------------------------
|
||||
; Program the packet size
|
||||
|
||||
mov eax, [esp + 4]
|
||||
mov eax, [esp + 8]
|
||||
@@: or eax, DSB_OWNbit or DSB_FSbit or DSB_LSbit
|
||||
cmp [tpc.cur_tx], NUM_TX_DESC - 1
|
||||
jne @f
|
||||
@ -1076,7 +1065,6 @@ transmit:
|
||||
|
||||
inc [tpc.cur_tx]
|
||||
and [tpc.cur_tx], NUM_TX_DESC - 1
|
||||
|
||||
ret 8
|
||||
|
||||
.fail:
|
||||
@ -1109,6 +1097,7 @@ int_handler:
|
||||
.nextdevice:
|
||||
mov ebx, dword [esi]
|
||||
|
||||
set_io 0
|
||||
set_io REG_IntrStatus
|
||||
in ax, dx
|
||||
|
||||
@ -1142,7 +1131,8 @@ int_handler:
|
||||
|
||||
DEBUGF 1,"RxDesc.status = 0x%x\n", [esi + rx_desc.status]
|
||||
|
||||
test [esi + rx_desc.status], DSB_OWNbit
|
||||
mov eax, [esi + rx_desc.status]
|
||||
test eax, DSB_OWNbit ;;;
|
||||
jnz .rx_return
|
||||
|
||||
DEBUGF 1,"tpc.cur_rx = %u\n", [tpc.cur_rx]
|
||||
@ -1156,7 +1146,15 @@ int_handler:
|
||||
push eax
|
||||
DEBUGF 1,"data length = %u\n", ax
|
||||
|
||||
push [esi + rx_desc.buf_Haddr]
|
||||
push [esi + rx_desc.buf_soft_addr]
|
||||
|
||||
;----------------------
|
||||
; Allocate a new buffer
|
||||
|
||||
stdcall KernelAlloc, RX_BUF_SIZE
|
||||
mov [esi + rx_desc.buf_soft_addr], eax
|
||||
GetRealAddr
|
||||
mov dword [esi + rx_desc.buf_addr], eax
|
||||
|
||||
;---------------
|
||||
; re set OWN bit
|
||||
@ -1167,14 +1165,6 @@ int_handler:
|
||||
or eax, DSB_EORbit
|
||||
@@: mov [esi + rx_desc.status], eax
|
||||
|
||||
;----------------------
|
||||
; Allocate a new buffer
|
||||
|
||||
stdcall KernelAlloc, RX_BUF_SIZE
|
||||
mov [esi + rx_desc.buf_Haddr], eax
|
||||
GetRealAddr
|
||||
sub [esi + rx_desc.buf_addr], eax
|
||||
|
||||
;--------------
|
||||
; Update rx ptr
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user