kolibrios/kernel/trunk/core/sys32.inc

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;                                                              ;;
;; Copyright (C) KolibriOS team 2004-2008. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License    ;;
;;                                                              ;;
;;                                                              ;;
;;  MenuetOS process management, protected ring3                ;;
;;                                                              ;;
;;  Distributed under GPL. See file COPYING for details.        ;;
;;  Copyright 2003 Ville Turjanmaa                              ;;
;;                                                              ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

$Revision$


align 4 ;3A08
build_interrupt_table:
        mov     edi, idts
        mov     esi, sys_int
        mov     ecx, 0x40
        mov     eax, (10001110b shl 24) + os_code
  @@:   movsw   ;low word of code-entry
        stosd   ;interrupt gate type : os_code selector
        movsw   ;high word of code-entry
        loop    @b
        movsd   ;copy low  dword of trap gate for int 0x40
        movsd   ;copy high dword of trap gate for int 0x40
        lidt    [esi]
        ret

iglobal
  align 4
  sys_int:
    ;exception handlers addresses (for interrupt gate construction)
        dd      e0,e1,e2,e3,e4,e5,e6,except_7 ; SEE: core/fpu.inc
        dd      e8,e9,e10,e11,e12,e13,page_fault_exc,e15
        dd      e16, e17,e18, e19
        times   12 dd unknown_interrupt ;int_20..int_31

    ;interrupt handlers addresses (for interrupt gate construction)
        dd      irq0, irq_serv.irq_1, irq_serv.irq_2
    if  USE_COM_IRQ
        dd      irq_serv.irq_3, irq_serv.irq_4
    else
        dd      p_irq3, p_irq4 ;??? <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
    end if
        dd      irq_serv.irq_5,  p_irq6,          irq_serv.irq_7
        dd      irq_serv.irq_8,  irq_serv.irq_9,  irq_serv.irq_10
        dd      irq_serv.irq_11, irq_serv.irq_12, irqD,p_irq14,p_irq15
        times   16 dd unknown_interrupt ;int_0x30..int_0x3F

    ;int_0x40 gate trap (for directly copied)
        dw      i40 and 0xFFFF, os_code, 11101111b shl 8, i40 shr 16

  idtreg: ; data for LIDT instruction (!!! must be immediately below sys_int data)
        dw      2*($-sys_int-4)-1
        dd      idts ;0x8000B100
        dw      0    ;<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>

  msg_fault_sel dd  msg_exc_8,msg_exc_u,msg_exc_a,msg_exc_b
                dd  msg_exc_c,msg_exc_d,msg_exc_e

  msg_exc_8     db "Double fault", 0
  msg_exc_u     db "Undefined Exception", 0
  msg_exc_a     db "Invalid TSS", 0
  msg_exc_b     db "Segment not present", 0
  msg_exc_c     db "Stack fault", 0
  msg_exc_d     db "General protection fault", 0
  msg_exc_e     db "Page fault", 0

  msg_sel_ker   db "kernel", 0
  msg_sel_app   db "application", 0

endg

macro save_ring3_context {
        pushad
}
macro restore_ring3_context {
        popad
}
macro exc_wo_code [num] {
  e#num :
        save_ring3_context
        mov     bl, num
        jmp     exc_c
} exc_wo_code   0,1,2,3,4,5,6,15,16,19

macro exc_w_code [num] {
  e#num :
        add     esp, 4
        save_ring3_context
        mov     bl, num
        jmp     exc_c
} exc_w_code    8,9,10,11,12,13,17,18


uglobal
  pf_err_code   dd ?
endg

page_fault_exc:                 ; <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>...
        pop     [ss:pf_err_code]; <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> #PF
        save_ring3_context
        mov     bl,14

exc_c:                          ; <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> (<EFBFBD><EFBFBD><EFBFBD>, <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 7-<EFBFBD><EFBFBD> - #NM)
; <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>/<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD> 3-<EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> + pushad (<EFBFBD>.<EFBFBD>., <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>)
  reg_ss        equ esp+0x30
  reg_esp3      equ esp+0x2C
  reg_eflags    equ esp+0x28
  reg_cs3       equ esp+0x24
  reg_eip       equ esp+0x20
 ; <EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD> pushad
  reg_eax       equ esp+0x1C
  reg_ecx       equ esp+0x18
  reg_edx       equ esp+0x14
  reg_ebx       equ esp+0x10
  reg_esp0      equ esp+0x0C
  reg_ebp       equ esp+0x08
  reg_esi       equ esp+0x04
  reg_edi       equ esp+0x00

        Mov     ds,ax,app_data  ; <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
        mov     es,ax           ; <EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
        cld                     ; <EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> DF <EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
        movzx   ebx,bl
; redirect to V86 manager? (EFLAGS & 0x20000) != 0?
        test    byte[reg_eflags+2],2
        jnz     v86_exc_c
        cmp     bl,14           ; #PF
        jne     @f
        call    page_fault_handler ; SEE: core/memory.inc
  @@:   mov     esi, [current_slot]
        btr     [esi+APPDATA.except_mask], ebx
        jnc     @f
        mov     eax,[esi+APPDATA.exc_handler]
        test    eax, eax
        jnz     IRetToUserHook
  @@:   cli
        mov     eax, [esi+APPDATA.debugger_slot]
        test    eax, eax
        jnz     .debug
        sti
; not debuggee => say error and terminate
        call    show_error_parameters ;; only ONE using, inline ???
       ;mov     edx, [TASK_BASE]
        mov     [edx + TASKDATA.state], byte 4 ; terminate
        jmp     change_task     ; stack - here it does not matter at all, SEE: core/shed.inc
.debug:
; we are debugged process, notify debugger and suspend ourself
; eax=debugger PID
        mov     ecx,1           ; debug_message code=other_exception
        cmp     bl,1            ; #DB
        jne     .notify         ; notify debugger and suspend ourself
        mov     ebx, dr6        ; debug_message data=DR6_image
        xor     edx, edx
        mov     dr6, edx
        mov     edx, dr7
        mov     cl, not 8
  .l1:  shl     dl,2
        jc      @f
        and     bl, cl
  @@:   sar     cl,1
        jc      .l1
        mov     cl, 3           ; debug_message code=debug_exception
.notify:
        push    ebx             ; debug_message data
        mov     ebx, [TASK_BASE]
        push    [ebx+TASKDATA.pid] ; PID
        push    ecx             ; debug_message code ((here: ecx==1/3))
        mov     cl, 12          ; debug_message size
        call    debugger_notify ;; only ONE using, inline ??? SEE: core/debug.inc
        add     esp,12
        mov     edx, [TASK_BASE]
        mov     byte [edx+TASKDATA.state], 1 ; suspended
        call    change_task     ; SEE: core/shed.inc
        restore_ring3_context
        iretd

IRetToUserHook:
        xchg    eax, [reg_eip]
        sub     dword[reg_esp3], 8
        mov     edi, [reg_esp3]
        stosd
        mov     [edi], ebx
        restore_ring3_context
unknown_interrupt:
        iretd

;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
show_error_parameters:
        mov     edx,[TASK_BASE] ;not scratched below
        DEBUGF  1, "K : Process - forced terminate PID: %x\n", [edx+TASKDATA.pid]
        cmp     bl, 0x08
        jb      .l0
        cmp     bl, 0x0e
        jbe     .l1
  .l0:  mov     bl, 0x09
  .l1:  mov     eax,[msg_fault_sel+ebx*4 - 0x08*4]
        DEBUGF  1, "K : %s\n", eax
        mov     eax, [reg_cs3+4]
        mov     edi, msg_sel_app
        mov     ebx, [reg_esp3+4]
        cmp     eax, app_code
        je      @f
        mov     edi, msg_sel_ker
        mov     ebx, [reg_esp0+4]
    @@: DEBUGF  1, "K : EAX : %x EBX : %x ECX : %x\n", [reg_eax+4], [reg_ebx+4], [reg_ecx+4]
        DEBUGF  1, "K : EDX : %x ESI : %x EDI : %x\n", [reg_edx+4], [reg_esi+4], [reg_edi+4]
        DEBUGF  1, "K : EBP : %x EIP : %x ESP : %x\n", [reg_ebp+4], [reg_eip+4], ebx
        DEBUGF  1, "K : Flags : %x CS : %x (%s)\n", [reg_eflags+4], eax, edi
        ret
;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  restore  reg_ss
  restore  reg_esp3
  restore  reg_eflags
  restore  reg_cs
  restore  reg_eip
  restore  reg_eax
  restore  reg_ecx
  restore  reg_edx
  restore  reg_ebx
  restore  reg_esp0
  restore  reg_ebp
  restore  reg_esi
  restore  reg_edi

; irq1  ->  hid/keyboard.inc
macro irqh [num] {
  p_irq#num :
        mov     edi, num
        jmp     irqhandler
}



p_irq6:
        save_ring3_context
        mov     ax, app_data  ;os_data
        mov     ds, ax
        mov     es, ax
        mov     edi, 6
        cmp     [v86_irqhooks+edi*8], 0
        jnz     v86_irq2
        call    fdc_irq
        call    ready_for_next_irq
        restore_ring3_context
        iret


p_irq14:
        save_ring3_context
        mov     ax, app_data  ;os_data
        mov     ds, ax
        mov     es, ax
        mov     edi, 14
        cmp     [v86_irqhooks+edi*8], 0
        jnz     v86_irq2
;       mov     byte [BOOT_VAR + 0x48E], 0xFF
        call    [irq14_func]
        call    ready_for_next_irq_1
        restore_ring3_context
        iret
p_irq15:
        save_ring3_context
        mov     ax, app_data  ;os_data
        mov     ds, ax
        mov     es, ax
        mov     edi, 15
        cmp     [v86_irqhooks+edi*8], 0
        jnz     v86_irq2
;       mov     byte [BOOT_VAR + 0x48E], 0xFF
        call    [irq15_func]
        call    ready_for_next_irq_1
        restore_ring3_context
        iret

ready_for_next_irq:
	mov	eax,5
        mov     [check_idle_semaphore],eax
;        mov     al, 0x20
	add 	eax,(0x20-0x5)

        out     0x20, al
        ret
;destroy eax
ready_for_next_irq_1:
	mov	eax,5
        mov     [check_idle_semaphore],eax
;        mov     al, 0x20
	add 	eax,(0x20-0x5)
        out     0xa0,al
        out     0x20, al
        ret

irqD:
        push  eax
	xor   eax,eax
        out   0xf0,al
        mov   al,0x20
        out   0xa0,al
        out   0x20,al
        pop   eax
        iret


irqh 2,3,4,5,7,8,9,10,11

irqhandler:

     mov    esi,edi          ; 1
     shl    esi,6            ; 1
     add    esi,irq00read    ; 1
     shl    edi,12           ; 1
     add    edi,IRQ_SAVE
     mov    ecx,16

   irqnewread:
     dec    ecx
     js     irqover

     movzx  edx, word [esi]        ; 2+

     test   edx, edx               ; 1
     jz     irqover


     mov    ebx, [edi]             ; address of begin of buffer in edi      ; + 0x0 dword - data size
     mov    eax, 4000                                                       ; + 0x4 dword - data begin offset
     cmp    ebx, eax
     je     irqfull
     add    ebx, [edi + 0x4]       ; add data size to data begin offset
     cmp    ebx, eax               ; if end of buffer, begin cycle again
     jb     @f

     xor    ebx, ebx

  @@:
     add    ebx, edi
     movzx  eax, byte[esi + 3]     ; get type of data being received 1 - byte, 2 - word
     dec    eax
     jz     irqbyte
     dec    eax
     jnz    noirqword

     in     ax,dx
     cmp    ebx, 3999              ; check for address odd in the end of buffer
     jne    .odd
     mov    [ebx + 0x10], ax
     jmp    .add_size
  .odd:
     mov    [ebx + 0x10], al       ; I could make mistake here :)
     mov    [edi + 0x10], ah
  .add_size:
     add    dword [edi], 2
     jmp    nextport


  irqbyte:
     in     al,dx
     mov    [ebx + 0x10],al
     inc    dword [edi]
  nextport:
     add    esi,4
     jmp    irqnewread


   noirqword:
   irqfull:
   irqover:

     ret



set_application_table_status:
        push eax

        mov  eax,[CURRENT_TASK]
        shl  eax, 5
        add  eax,CURRENT_TASK+TASKDATA.pid
        mov  eax,[eax]

        mov  [application_table_status],eax

        pop  eax

        ret


clear_application_table_status:
        push eax

        mov  eax,[CURRENT_TASK]
        shl  eax, 5
        add  eax,CURRENT_TASK+TASKDATA.pid
        mov  eax,[eax]

        cmp  eax,[application_table_status]
        jne  apptsl1
	xor  eax,eax
        mov  [application_table_status],eax
      apptsl1:

        pop  eax

        ret

;  * eax = 64 - <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
;  * ebx = 1 - <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
;  * ecx = <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
;<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:
;  * eax = 0 - <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
;  * eax = 1 - <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>

sys_resize_app_memory:
        ; ebx = 1 - resize
        ; ecx = new amount of memory

;        cmp    eax,1
	dec	ebx
        jnz    .no_application_mem_resize
        stdcall new_mem_resize, ecx
        mov [esp+32], eax
.no_application_mem_resize:
        ret

iglobal
;  process_terminating  db 'K : Process - terminating',13,10,0
;  process_terminated   db 'K : Process - done',13,10,0
  msg_obj_destroy       db 'K : destroy app object',13,10,0
endg

; param
;  esi= slot

terminate: ; terminate application

           .slot equ esp   ;locals

           push   esi      ;save .slot

           shl esi, 8
           cmp [SLOT_BASE+esi+APPDATA.dir_table], 0
           jne @F
           pop    esi
           shl    esi, 5
           mov    [CURRENT_TASK+esi+TASKDATA.state], 9
           ret
@@:
           ;mov    esi,process_terminating
           ;call   sys_msg_board_str
@@:
           cli
           cmp   [application_table_status],0
           je    term9
           sti
           call  change_task
           jmp   @b
term9:
           call  set_application_table_status

; if the process is in V86 mode...
        mov     eax, [.slot]
        shl     eax, 8
        mov     esi, [eax+SLOT_BASE+APPDATA.pl0_stack]
        add     esi, RING0_STACK_SIZE
        cmp     [eax+SLOT_BASE+APPDATA.saved_esp0], esi
        jz      .nov86
; ...it has page directory for V86 mode
        mov     esi, [eax+SLOT_BASE+APPDATA.saved_esp0]
        mov     ecx, [esi+4]
        mov     [eax+SLOT_BASE+APPDATA.dir_table], ecx
; ...and I/O permission map for V86 mode
        mov     ecx, [esi+12]
        mov     [eax+SLOT_BASE+APPDATA.io_map], ecx
        mov     ecx, [esi+8]
        mov     [eax+SLOT_BASE+APPDATA.io_map+4], ecx
.nov86:

           mov esi, [.slot]
           shl esi,8
           add esi, SLOT_BASE+APP_OBJ_OFFSET
@@:
           mov eax, [esi+APPOBJ.fd]
           test eax, eax
           jz @F

           cmp eax, esi
           je @F

           push esi
           call [eax+APPOBJ.destroy]
           DEBUGF 1,"%s",msg_obj_destroy
           pop esi
           jmp @B
@@:

           mov eax, [.slot]
           shl eax, 8
           stdcall destroy_app_space, [SLOT_BASE+eax+APPDATA.dir_table], [SLOT_BASE+eax+APPDATA.dlls_list_ptr]

           mov esi, [.slot]
           cmp [fpu_owner],esi   ; if user fpu last -> fpu user = 1
           jne @F

           mov [fpu_owner],1
           mov eax, [256+SLOT_BASE+APPDATA.fpu_state]
           clts
           bt [cpu_caps], CAPS_SSE
           jnc .no_SSE
           fxrstor [eax]
           jmp @F
.no_SSE:
           fnclex
           frstor [eax]
@@:

    mov   [KEY_COUNT],byte 0           ; empty keyboard buffer
    mov   [BTN_COUNT],byte 0           ; empty button buffer


; remove defined hotkeys
        mov     eax, hotkey_list
.loop:
        cmp     [eax+8], esi
        jnz     .cont
        mov     ecx, [eax]
        jecxz   @f
        push    dword [eax+12]
        pop     dword [ecx+12]
@@:
        mov     ecx, [eax+12]
        push    dword [eax]
        pop     dword [ecx]
        xor     ecx, ecx
        mov     [eax], ecx
        mov     [eax+4], ecx
        mov     [eax+8], ecx
        mov     [eax+12], ecx
.cont:
        add     eax, 16
        cmp     eax, hotkey_list+256*16
        jb      .loop
; remove hotkeys in buffer
        mov     eax, hotkey_buffer
.loop2:
        cmp     [eax], esi
        jnz     .cont2
        and     dword [eax+4], 0
        and     dword [eax], 0
.cont2:
        add     eax, 8
        cmp     eax, hotkey_buffer+120*8
        jb      .loop2

    mov   ecx,esi                 ; remove buttons
  bnewba2:
    mov   edi,[BTN_ADDR]
    mov   eax,edi
    cld
    movzx ebx,word [edi]
    inc   bx
  bnewba:
    dec   bx
    jz    bnmba
    add   eax,0x10
    cmp   cx,[eax]
    jnz   bnewba
    pusha
    mov   ecx,ebx
    inc   ecx
    shl   ecx,4
    mov   ebx,eax
    add   eax,0x10
    call  memmove
    dec   dword [edi]
    popa
    jmp   bnewba2
  bnmba:

    pusha     ; save window coordinates for window restoring
    cld
    shl   esi,5
    add   esi,window_data
    mov   eax,[esi+WDATA.box.left]
    mov   [draw_limits.left],eax
    add   eax,[esi+WDATA.box.width]
    mov   [draw_limits.right],eax
    mov   eax,[esi+WDATA.box.top]
    mov   [draw_limits.top],eax
    add   eax,[esi+WDATA.box.height]
    mov   [draw_limits.bottom],eax

    xor   eax, eax
    mov   [esi+WDATA.box.left],eax
    mov   [esi+WDATA.box.width],eax
    mov   [esi+WDATA.box.top],eax
    mov   [esi+WDATA.box.height],eax
    mov   [esi+WDATA.cl_workarea],eax
    mov   [esi+WDATA.cl_titlebar],eax
    mov   [esi+WDATA.cl_frames],eax
    mov   dword [esi+WDATA.reserved],eax ; clear all flags: wstate, redraw, wdrawn
    lea   edi, [esi-window_data+draw_data]
    mov   ecx,32/4
    rep   stosd
    popa

; debuggee test
    pushad
    mov  edi, esi
    shl  edi, 5
    mov  eax, [SLOT_BASE+edi*8+APPDATA.debugger_slot]
    test eax, eax
    jz   .nodebug
    push 8
    pop  ecx
    push dword [CURRENT_TASK+edi+TASKDATA.pid]   ; PID
    push 2
    call debugger_notify
    pop  ecx
    pop  ecx
.nodebug:
    popad

           mov ebx, [.slot]
           shl ebx, 8
           push ebx
           mov ebx,[SLOT_BASE+ebx+APPDATA.pl0_stack]

           stdcall kernel_free, ebx

           pop ebx
           mov ebx,[SLOT_BASE+ebx+APPDATA.cur_dir]
           stdcall kernel_free, ebx

           mov edi, [.slot]
           shl edi,8
           add edi,SLOT_BASE

           mov eax, [edi+APPDATA.io_map]
           cmp eax, [SLOT_BASE+256+APPDATA.io_map]
           je @F
           call free_page
@@:
           mov eax, [edi+APPDATA.io_map+4]
           cmp eax, [SLOT_BASE+256+APPDATA.io_map+4]
           je @F
           call free_page
@@:
           mov eax, 0x20202020
           stosd
           stosd
           stosd
           mov ecx,244/4
           xor eax, eax
           rep stosd

  ; activate window
        movzx  eax, word [WIN_STACK + esi*2]
        cmp    eax, [TASK_COUNT]
        jne    .dont_activate
        pushad
 .check_next_window:
        dec    eax
        cmp    eax, 1
        jbe    .nothing_to_activate
        lea    esi, [WIN_POS+eax*2]
        movzx  edi, word [esi]               ; edi = process
        shl    edi, 5
        cmp    [CURRENT_TASK + edi + TASKDATA.state], byte 9  ; skip dead slots
        je     .check_next_window
        add    edi, window_data
; \begin{diamond}[19.09.2006]
; skip minimized windows
        test   [edi + WDATA.fl_wstate], WSTATE_MINIMIZED
        jnz    .check_next_window
; \end{diamond}
        call   waredraw
 .nothing_to_activate:
        popad
 .dont_activate:

        push    esi     ; remove hd1 & cd & flp reservation
        shl     esi, 5
        mov     esi, [esi+CURRENT_TASK+TASKDATA.pid]
        cmp     [hd1_status], esi
        jnz     @f
        call    free_hd_channel
        and     [hd1_status], 0
@@:
        cmp     [cd_status], esi
        jnz     @f
        call    free_cd_channel
        and     [cd_status], 0
@@:
        cmp     [flp_status], esi
        jnz     @f
        and     [flp_status], 0
@@:
        pop     esi
        cmp     [bgrlockpid], esi
        jnz     @f
        and     [bgrlockpid], 0
        and     [bgrlock], 0
@@:

    pusha ; remove all irq reservations
    mov   eax,esi
    shl   eax, 5
    mov   eax,[eax+CURRENT_TASK+TASKDATA.pid]
    mov   edi,irq_owner
    xor   ebx, ebx
    xor   edx, edx
  newirqfree:
    cmp   [edi + 4 * ebx], eax
    jne   nofreeirq
    mov   [edi + 4 * ebx], edx                          ; remove irq reservation
    mov   [irq_tab + 4 * ebx], edx                      ; remove irq handler
    mov   [irq_rights + 4 * ebx], edx                   ; set access rights to full access
  nofreeirq:
    inc   ebx
    cmp   ebx, 16
    jb    newirqfree
    popa

    pusha                     ; remove all port reservations
    mov   edx,esi
    shl   edx, 5
    add   edx,CURRENT_TASK
    mov   edx,[edx+TASKDATA.pid]

  rmpr0:

    mov   esi,[RESERVED_PORTS]

    test  esi,esi
    jz    rmpr9

  rmpr3:

    mov   edi,esi
    shl   edi,4
    add   edi,RESERVED_PORTS

    cmp   edx,[edi]
    je    rmpr4

    dec   esi
    jnz   rmpr3

    jmp   rmpr9

  rmpr4:

    mov   ecx,256
    sub   ecx,esi
    shl   ecx,4

    mov   esi,edi
    add   esi,16
    cld
    rep   movsb

    dec   dword [RESERVED_PORTS]

    jmp   rmpr0

  rmpr9:

    popa
    mov  edi,esi         ; do not run this process slot
    shl  edi, 5
    mov  [edi+CURRENT_TASK + TASKDATA.state],byte 9
; debugger test - terminate all debuggees
    mov  eax, 2
    mov  ecx, SLOT_BASE+2*0x100+APPDATA.debugger_slot
.xd0:
    cmp  eax, [TASK_COUNT]
    ja   .xd1
    cmp  dword [ecx], esi
    jnz  @f
    and  dword [ecx], 0
    pushad
    xchg eax, ecx
    mov  ebx, 2
    call sys_system
    popad
@@:
    inc  eax
    add  ecx, 0x100
    jmp  .xd0
.xd1:
;    call  systest
    sti  ; .. and life goes on

    mov   eax, [draw_limits.left]
    mov   ebx, [draw_limits.top]
    mov   ecx, [draw_limits.right]
    mov   edx, [draw_limits.bottom]
    call  calculatescreen
    xor   eax, eax
    xor   esi, esi
    call  redrawscreen

    mov   [MOUSE_BACKGROUND],byte 0  ; no mouse background
    mov   [DONT_DRAW_MOUSE],byte 0  ; draw mouse

    and   [application_table_status],0
    ;mov   esi,process_terminated
    ;call  sys_msg_board_str
    add esp, 4
    ret
restore .slot

iglobal
  boot_sched_1    db   'Building gdt tss pointer',0
  boot_sched_2    db   'Building IDT table',0
endg


build_scheduler:

        mov    esi,boot_sched_1
        call   boot_log
  ;      call   build_process_gdt_tss_pointer

  ;      mov    esi,boot_sched_2
  ;      call   boot_log

        ret