kolibrios/drivers/acpi/acpica/dbmethod.c

/*******************************************************************************
 *
 * Module Name: dbmethod - Debug commands for control methods
 *
 ******************************************************************************/

/*
 * Copyright (C) 2000 - 2015, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#include <acpi/acpi.h>
#include "accommon.h"
#include "acdispat.h"
#include "acnamesp.h"
#include "acdebug.h"
#include "acparser.h"
#include "acpredef.h"

#define _COMPONENT          ACPI_CA_DEBUGGER
ACPI_MODULE_NAME("dbmethod")

/*******************************************************************************
 *
 * FUNCTION:    acpi_db_set_method_breakpoint
 *
 * PARAMETERS:  location            - AML offset of breakpoint
 *              walk_state          - Current walk info
 *              op                  - Current Op (from parse walk)
 *
 * RETURN:      None
 *
 * DESCRIPTION: Set a breakpoint in a control method at the specified
 *              AML offset
 *
 ******************************************************************************/
void
acpi_db_set_method_breakpoint(char *location,
			      struct acpi_walk_state *walk_state,
			      union acpi_parse_object *op)
{
	u32 address;
	u32 aml_offset;

	if (!op) {
		acpi_os_printf("There is no method currently executing\n");
		return;
	}

	/* Get and verify the breakpoint address */

	address = strtoul(location, NULL, 16);
	aml_offset = (u32)ACPI_PTR_DIFF(op->common.aml,
					walk_state->parser_state.aml_start);
	if (address <= aml_offset) {
		acpi_os_printf("Breakpoint %X is beyond current address %X\n",
			       address, aml_offset);
	}

	/* Save breakpoint in current walk */

	walk_state->user_breakpoint = address;
	acpi_os_printf("Breakpoint set at AML offset %X\n", address);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_db_set_method_call_breakpoint
 *
 * PARAMETERS:  op                  - Current Op (from parse walk)
 *
 * RETURN:      None
 *
 * DESCRIPTION: Set a breakpoint in a control method at the specified
 *              AML offset
 *
 ******************************************************************************/

void acpi_db_set_method_call_breakpoint(union acpi_parse_object *op)
{

	if (!op) {
		acpi_os_printf("There is no method currently executing\n");
		return;
	}

	acpi_gbl_step_to_next_call = TRUE;
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_db_set_method_data
 *
 * PARAMETERS:  type_arg        - L for local, A for argument
 *              index_arg       - which one
 *              value_arg       - Value to set.
 *
 * RETURN:      None
 *
 * DESCRIPTION: Set a local or argument for the running control method.
 *              NOTE: only object supported is Number.
 *
 ******************************************************************************/

void acpi_db_set_method_data(char *type_arg, char *index_arg, char *value_arg)
{
	char type;
	u32 index;
	u32 value;
	struct acpi_walk_state *walk_state;
	union acpi_operand_object *obj_desc;
	acpi_status status;
	struct acpi_namespace_node *node;

	/* Validate type_arg */

	acpi_ut_strupr(type_arg);
	type = type_arg[0];
	if ((type != 'L') && (type != 'A') && (type != 'N')) {
		acpi_os_printf("Invalid SET operand: %s\n", type_arg);
		return;
	}

	value = strtoul(value_arg, NULL, 16);

	if (type == 'N') {
		node = acpi_db_convert_to_node(index_arg);
		if (!node) {
			return;
		}

		if (node->type != ACPI_TYPE_INTEGER) {
			acpi_os_printf("Can only set Integer nodes\n");
			return;
		}
		obj_desc = node->object;
		obj_desc->integer.value = value;
		return;
	}

	/* Get the index and value */

	index = strtoul(index_arg, NULL, 16);

	walk_state = acpi_ds_get_current_walk_state(acpi_gbl_current_walk_list);
	if (!walk_state) {
		acpi_os_printf("There is no method currently executing\n");
		return;
	}

	/* Create and initialize the new object */

	obj_desc = acpi_ut_create_integer_object((u64)value);
	if (!obj_desc) {
		acpi_os_printf("Could not create an internal object\n");
		return;
	}

	/* Store the new object into the target */

	switch (type) {
	case 'A':

		/* Set a method argument */

		if (index > ACPI_METHOD_MAX_ARG) {
			acpi_os_printf("Arg%u - Invalid argument name\n",
				       index);
			goto cleanup;
		}

		status = acpi_ds_store_object_to_local(ACPI_REFCLASS_ARG,
						       index, obj_desc,
						       walk_state);
		if (ACPI_FAILURE(status)) {
			goto cleanup;
		}

		obj_desc = walk_state->arguments[index].object;

		acpi_os_printf("Arg%u: ", index);
		acpi_db_display_internal_object(obj_desc, walk_state);
		break;

	case 'L':

		/* Set a method local */

		if (index > ACPI_METHOD_MAX_LOCAL) {
			acpi_os_printf
			    ("Local%u - Invalid local variable name\n", index);
			goto cleanup;
		}

		status = acpi_ds_store_object_to_local(ACPI_REFCLASS_LOCAL,
						       index, obj_desc,
						       walk_state);
		if (ACPI_FAILURE(status)) {
			goto cleanup;
		}

		obj_desc = walk_state->local_variables[index].object;

		acpi_os_printf("Local%u: ", index);
		acpi_db_display_internal_object(obj_desc, walk_state);
		break;

	default:

		break;
	}

cleanup:
	acpi_ut_remove_reference(obj_desc);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_db_disassemble_aml
 *
 * PARAMETERS:  statements          - Number of statements to disassemble
 *              op                  - Current Op (from parse walk)
 *
 * RETURN:      None
 *
 * DESCRIPTION: Display disassembled AML (ASL) starting from Op for the number
 *              of statements specified.
 *
 ******************************************************************************/

void acpi_db_disassemble_aml(char *statements, union acpi_parse_object *op)
{
	u32 num_statements = 8;

	if (!op) {
		acpi_os_printf("There is no method currently executing\n");
		return;
	}

	if (statements) {
		num_statements = strtoul(statements, NULL, 0);
	}
#ifdef ACPI_DISASSEMBLER
	acpi_dm_disassemble(NULL, op, num_statements);
#endif
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_db_disassemble_method
 *
 * PARAMETERS:  name            - Name of control method
 *
 * RETURN:      None
 *
 * DESCRIPTION: Display disassembled AML (ASL) starting from Op for the number
 *              of statements specified.
 *
 ******************************************************************************/

acpi_status acpi_db_disassemble_method(char *name)
{
	acpi_status status;
	union acpi_parse_object *op;
	struct acpi_walk_state *walk_state;
	union acpi_operand_object *obj_desc;
	struct acpi_namespace_node *method;

	method = acpi_db_convert_to_node(name);
	if (!method) {
		return (AE_BAD_PARAMETER);
	}

	if (method->type != ACPI_TYPE_METHOD) {
		ACPI_ERROR((AE_INFO, "%s (%s): Object must be a control method",
			    name, acpi_ut_get_type_name(method->type)));
		return (AE_BAD_PARAMETER);
	}

	obj_desc = method->object;

	op = acpi_ps_create_scope_op(obj_desc->method.aml_start);
	if (!op) {
		return (AE_NO_MEMORY);
	}

	/* Create and initialize a new walk state */

	walk_state = acpi_ds_create_walk_state(0, op, NULL, NULL);
	if (!walk_state) {
		return (AE_NO_MEMORY);
	}

	status = acpi_ds_init_aml_walk(walk_state, op, NULL,
				       obj_desc->method.aml_start,
				       obj_desc->method.aml_length, NULL,
				       ACPI_IMODE_LOAD_PASS1);
	if (ACPI_FAILURE(status)) {
		return (status);
	}

	status = acpi_ut_allocate_owner_id(&obj_desc->method.owner_id);
	walk_state->owner_id = obj_desc->method.owner_id;

	/* Push start scope on scope stack and make it current */

	status = acpi_ds_scope_stack_push(method, method->type, walk_state);
	if (ACPI_FAILURE(status)) {
		return (status);
	}

	/* Parse the entire method AML including deferred operators */

	walk_state->parse_flags &= ~ACPI_PARSE_DELETE_TREE;
	walk_state->parse_flags |= ACPI_PARSE_DISASSEMBLE;

	status = acpi_ps_parse_aml(walk_state);

#ifdef ACPI_DISASSEMBLER
	(void)acpi_dm_parse_deferred_ops(op);

	/* Now we can disassemble the method */

	acpi_gbl_dm_opt_verbose = FALSE;
	acpi_dm_disassemble(NULL, op, 0);
	acpi_gbl_dm_opt_verbose = TRUE;
#endif

	acpi_ps_delete_parse_tree(op);

	/* Method cleanup */

	acpi_ns_delete_namespace_subtree(method);
	acpi_ns_delete_namespace_by_owner(obj_desc->method.owner_id);
	acpi_ut_release_owner_id(&obj_desc->method.owner_id);
	return (AE_OK);
}