mirror of
https://github.com/KolibriOS/kolibrios.git
synced 2024-12-23 23:26:49 +03:00
41 lines
1.8 KiB
Plaintext
41 lines
1.8 KiB
Plaintext
|
Framebuffer abstraction library
|
||
|
|
-------------------------------
|
||
|
|
|
||
|
|
This library provides a generic abstraction to a linear section of
|
||
|
|
memory which coresponds to a visible array of pixel elements on a
|
||
|
|
display device. The memory starts at a base location and is logically
|
||
|
|
split into rows, the length of each row in memory is refered to as the
|
||
|
|
stride length.
|
||
|
|
|
||
|
|
The display device may use differing numbers of bits to represent each
|
||
|
|
pixel, this represented by the bpp value and may be one of 1, 4, 8,
|
||
|
|
16, 24 or 32. The library assumes packed pixels and does not support
|
||
|
|
colour depths which do not correspond to the bpp. The 1bpp mode is a
|
||
|
|
fixed black and white pallette, the 4 and 8 bpp modes use a 16 and 256
|
||
|
|
entry pallette respectively and the 16, and 24 bpp modes are direct
|
||
|
|
indexed RGB modes in 565 and 888 format. The 32bpp mode is RGB in 888
|
||
|
|
format with the top byte unused.
|
||
|
|
|
||
|
|
The library may be coupled to several display devices. The available
|
||
|
|
devices are controlled by compile time configuration.
|
||
|
|
|
||
|
|
Usage
|
||
|
|
-----
|
||
|
|
|
||
|
|
The library is initialised by calling nsfb_init() with the frontend
|
||
|
|
type as a parameter. The nsfb_t pointer returned is used in all calls
|
||
|
|
to the library. The geometry and physical settings may be altered
|
||
|
|
using the nsfb_set_geometry() and nsfb_set_physical() functions. The
|
||
|
|
frontend *must* then be initialised. The nsfb_set_geometry() and
|
||
|
|
nsfb_set_physical() functions may be called at any time, however they
|
||
|
|
are likely to fail once the frontend has been initialised.
|
||
|
|
|
||
|
|
The nsfb_finalise() function should be called to shut the library down
|
||
|
|
when finished.
|
||
|
|
|
||
|
|
When directly acessing the framebuffer memory the nsfb_claim() and
|
||
|
|
nsfb_release() calls should be used. These allow the frontends to
|
||
|
|
syncronise access and only update the altered regions of the drawing
|
||
|
|
area. Note the area claimed and released may not neccisarily be the
|
||
|
|
same.
|