haiku/headers/posix/termios.h
Scott McCreary 0fae873352 Updated posix headers to remove commas from copyright line, to match the preferred coding guidelines.
Cleaned up some header style violations, making sure there are two blank lines after the header guards.
This fixes the posix header part of #2191.


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39288 a95241bf-73f2-0310-859d-f6bbb57e9c96
2010-11-03 21:46:47 +00:00

226 lines
7.1 KiB
C

/*
* Copyright 2004-2010 Haiku Inc. All Rights Reserved.
* Distributed under the terms of the MIT License.
*/
#ifndef _TERMIOS_H_
#define _TERMIOS_H_
#include <sys/types.h>
typedef __haiku_uint32 tcflag_t;
typedef unsigned char speed_t;
typedef unsigned char cc_t;
#define NCCS 11 /* number of control characters */
struct termios {
tcflag_t c_iflag; /* input modes */
tcflag_t c_oflag; /* output modes */
tcflag_t c_cflag; /* control modes */
tcflag_t c_lflag; /* local modes */
char c_line; /* line discipline */
speed_t c_ispeed; /* (unused) */
speed_t c_ospeed; /* (unused) */
cc_t c_cc[NCCS]; /* control characters */
};
/* control characters */
#define VINTR 0
#define VQUIT 1
#define VERASE 2
#define VKILL 3
#define VEOF 4
#define VEOL 5
#define VMIN 4
#define VTIME 5
#define VEOL2 6
#define VSWTCH 7
#define VSTART 8
#define VSTOP 9
#define VSUSP 10
/* c_iflag - input control modes */
#define IGNBRK 0x01 /* ignore break condition */
#define BRKINT 0x02 /* break sends interrupt */
#define IGNPAR 0x04 /* ignore characters with parity errors */
#define PARMRK 0x08 /* mark parity errors */
#define INPCK 0x10 /* enable input parity checking */
#define ISTRIP 0x20 /* strip high bit from characters */
#define INLCR 0x40 /* maps newline to CR on input */
#define IGNCR 0x80 /* ignore carriage returns */
#define ICRNL 0x100 /* map CR to newline on input */
#define IUCLC 0x200 /* map all upper case to lower */
#define IXON 0x400 /* enable input SW flow control */
#define IXANY 0x800 /* any character will restart input */
#define IXOFF 0x1000 /* enable output SW flow control */
/* c_oflag - output control modes */
#define OPOST 0x01 /* enable postprocessing of output */
#define OLCUC 0x02 /* map lowercase to uppercase */
#define ONLCR 0x04 /* map NL to CR-NL on output */
#define OCRNL 0x08 /* map CR to NL on output */
#define ONOCR 0x10 /* no CR output when at column 0 */
#define ONLRET 0x20 /* newline performs CR function */
#define OFILL 0x40 /* use fill characters for delays */
#define OFDEL 0x80 /* Fills are DEL, otherwise NUL */
#define NLDLY 0x100 /* Newline delays: */
#define NL0 0x000
#define NL1 0x100
#define CRDLY 0x600 /* Carriage return delays: */
#define CR0 0x000
#define CR1 0x200
#define CR2 0x400
#define CR3 0x600
#define TABDLY 0x1800 /* Tab delays: */
#define TAB0 0x0000
#define TAB1 0x0800
#define TAB2 0x1000
#define TAB3 0x1800
#define BSDLY 0x2000 /* Backspace delays: */
#define BS0 0x0000
#define BS1 0x2000
#define VTDLY 0x4000 /* Vertical tab delays: */
#define VT0 0x0000
#define VT1 0x4000
#define FFDLY 0x8000 /* Form feed delays: */
#define FF0 0x0000
#define FF1 0x8000
/* c_cflag - control modes */
#define CBAUD 0x1F /* line speed definitions */
#define B0 0x00 /* hang up */
#define B50 0x01 /* 50 baud */
#define B75 0x02
#define B110 0x03
#define B134 0x04
#define B150 0x05
#define B200 0x06
#define B300 0x07
#define B600 0x08
#define B1200 0x09
#define B1800 0x0A
#define B2400 0x0B
#define B4800 0x0C
#define B9600 0x0D
#define B19200 0x0E
#define B31250 0x0F /* for MIDI */
#define B38400 0x10
#define B57600 0x11
#define B115200 0x12
#define B230400 0x13
#define CSIZE 0x20 /* character size */
#define CS5 0x00 /* only 7 and 8 bits supported */
#define CS6 0x00 /* Note, it was not very wise to set all of these */
#define CS7 0x00 /* to zero, but there is not much we can do about it*/
#define CS8 0x20
#define CSTOPB 0x40 /* send 2 stop bits, not 1 */
#define CREAD 0x80 /* enable receiver */
#define PARENB 0x100 /* parity enable */
#define PARODD 0x200 /* odd parity, else even */
#define HUPCL 0x400 /* hangs up on last close */
#define CLOCAL 0x800 /* indicates local line */
#define XLOBLK 0x1000 /* block layer output ?*/
#define CTSFLOW 0x2000 /* enable CTS flow */
#define RTSFLOW 0x4000 /* enable RTS flow */
#define CRTSCTS (RTSFLOW | CTSFLOW)
/* c_lflag - local modes */
#define ISIG 0x01 /* enable signals */
#define ICANON 0x02 /* Canonical input */
#define XCASE 0x04 /* Canonical u/l case */
#define ECHO 0x08 /* Enable echo */
#define ECHOE 0x10 /* Echo erase as bs-sp-bs */
#define ECHOK 0x20 /* Echo nl after kill */
#define ECHONL 0x40 /* Echo nl */
#define NOFLSH 0x80 /* Disable flush after int or quit */
#define TOSTOP 0x100 /* stop bg processes that write to tty */
#define IEXTEN 0x200 /* implementation defined extensions */
#define ECHOCTL 0x400
#define ECHOPRT 0x800
#define ECHOKE 0x1000
#define FLUSHO 0x2000
#define PENDIN 0x4000
/* options to tcsetattr() */
#define TCSANOW 0x01 /* make change immediate */
#define TCSADRAIN 0x02 /* drain output, then change */
#define TCSAFLUSH 0x04 /* drain output, flush input */
/* actions for tcflow() */
#define TCOOFF 0x01 /* suspend output */
#define TCOON 0x02 /* restart output */
#define TCIOFF 0x04 /* transmit STOP character, intended to stop input data */
#define TCION 0x08 /* transmit START character, intended to resume input data */
/* values for tcflush() */
#define TCIFLUSH 0x01 /* flush pending input */
#define TCOFLUSH 0x02 /* flush untransmitted output */
#define TCIOFLUSH 0x03 /* flush both */
/* ioctl() identifiers to control the TTY */
#define TCGETA 0x8000
#define TCSETA (TCGETA + 1)
#define TCSETAF (TCGETA + 2)
#define TCSETAW (TCGETA + 3)
#define TCWAITEVENT (TCGETA + 4)
#define TCSBRK (TCGETA + 5)
#define TCFLSH (TCGETA + 6)
#define TCXONC (TCGETA + 7)
#define TCQUERYCONNECTED (TCGETA + 8)
#define TCGETBITS (TCGETA + 9)
#define TCSETDTR (TCGETA + 10)
#define TCSETRTS (TCGETA + 11)
#define TIOCGWINSZ (TCGETA + 12) /* pass in a struct winsize */
#define TIOCSWINSZ (TCGETA + 13) /* pass in a struct winsize */
#define TCVTIME (TCGETA + 14) /* pass in bigtime_t, old value saved */
#define TIOCGPGRP (TCGETA + 15) /* Gets the process group ID of the TTY device */
#define TIOCSPGRP (TCGETA + 16) /* Sets the process group ID ('pgid' in BeOS) */
#define TIOCSCTTY (TCGETA + 17) /* Become controlling TTY */
/* Event codes. Returned from TCWAITEVENT */
#define EV_RING 0x0001
#define EV_BREAK 0x0002
#define EV_CARRIER 0x0004
#define EV_CARRIERLOST 0x0008
/* for TIOCGWINSZ */
struct winsize {
unsigned short ws_row;
unsigned short ws_col;
unsigned short ws_xpixel;
unsigned short ws_ypixel;
};
/* Bits for the TCGETBITS control */
#define TCGB_CTS 0x01
#define TCGB_DSR 0x02
#define TCGB_RI 0x04
#define TCGB_DCD 0x08
#ifdef __cplusplus
extern "C" {
#endif
extern speed_t cfgetispeed(const struct termios *termios);
extern speed_t cfgetospeed(const struct termios *termios);
extern int cfsetispeed(struct termios *termios, speed_t speed);
extern int cfsetospeed(struct termios *termios, speed_t speed);
extern int tcgetattr(int fd, struct termios *termios);
extern int tcsetattr(int fd, int option, const struct termios *termios);
extern int tcsendbreak(int fd, int duration);
extern int tcdrain(int fd);
extern int tcflow(int fd, int action);
extern int tcflush(int fd, int queueSelector);
#ifdef __cplusplus
}
#endif
#endif /* _TERMIOS_H_ */