haiku/headers/private/graphics/neomagic/DriverInterface.h

/*
	Copyright 1999, Be Incorporated.   All Rights Reserved.
	This file may be used under the terms of the Be Sample Code License.

	Other authors:
	Rudolf Cornelissen 4/2003-1/2006
*/

#ifndef DRIVERINTERFACE_H
#define DRIVERINTERFACE_H

#include <Accelerant.h>
#include "video_overlay.h"
#include <Drivers.h>
#include <PCI.h>
#include <OS.h>

#define DRIVER_PREFIX "nm" // apsed

/*
	Internal driver state (also for sharing info between driver and accelerant)
*/
#if defined(__cplusplus)
extern "C" {
#endif

typedef struct {
	sem_id	sem;
	int32	ben;
} benaphore;

#define INIT_BEN(x)		x.sem = create_sem(0, "NM "#x" benaphore");  x.ben = 0;
#define AQUIRE_BEN(x)	if((atomic_add(&(x.ben), 1)) >= 1) acquire_sem(x.sem);
#define RELEASE_BEN(x)	if((atomic_add(&(x.ben), -1)) > 1) release_sem(x.sem);
#define	DELETE_BEN(x)	delete_sem(x.sem);


#define NM_PRIVATE_DATA_MAGIC	0x0009 /* a private driver rev, of sorts */

/*dualhead extensions to flags*/
#define DUALHEAD_OFF (0<<6)
#define DUALHEAD_CLONE (1<<6)
#define DUALHEAD_ON (2<<6)
#define DUALHEAD_SWITCH (3<<6)
#define DUALHEAD_BITS (3<<6)
#define DUALHEAD_CAPABLE (1<<8)
#define TV_BITS (3<<9)
#define TV_MON (0<<9
#define TV_PAL (1<<9)
#define TV_NTSC (2<<9)
#define TV_CAPABLE (1<<11)
#define TV_VIDEO (1<<12)
#define TV_PRIMARY (1<<13)

#define SKD_MOVE_CURSOR    0x00000001
#define SKD_PROGRAM_CLUT   0x00000002
#define SKD_SET_START_ADDR 0x00000004
#define SKD_SET_CURSOR     0x00000008
#define SKD_HANDLER_INSTALLED 0x80000000

enum {
	NM_GET_PRIVATE_DATA = B_DEVICE_OP_CODES_END + 1,
	NM_GET_PCI,
	NM_SET_PCI,
	NM_DEVICE_NAME,
	NM_RUN_INTERRUPTS,
	NM_ISA_OUT,
	NM_ISA_IN,
	NM_PGM_BES
};

/* max. number of overlay buffers */
#define MAXBUFFERS 3

/* internal used info on overlay buffers */
typedef	struct
{
	uint16 slopspace;
	uint32 size;
} int_buf_info;

typedef struct settings {  // apsed, see comments in nm.settings
	// for driver
	char   accelerant[B_FILE_NAME_LENGTH];
	bool   dumprom;
	// for accelerant
	uint32 logmask;
	uint32 memory;
	bool   usebios;
	bool   hardcursor;
} settings;

/*shared info*/
typedef struct {
  /*a few ID things*/
	uint16	vendor_id;	/* PCI vendor ID, from pci_info */
	uint16	device_id;	/* PCI device ID, from pci_info */
	uint8	revision;	/* PCI device revsion, from pci_info */

  /* used to return status for INIT_ACCELERANT and CLONE_ACCELERANT */
	bool	accelerant_in_use;

  /* bug workaround for 4.5.0 */
	uint32 use_clone_bugfix;	/*for 4.5.0, cloning of physical memory does not work*/
	uint32 * clone_bugfix_regs;
	uint32 * clone_bugfix_regs2;

	/* old cards have their registers mapped inside the framebuffer area */
	bool regs_in_fb;

  /*memory mappings*/
	area_id	regs_area, regs2_area;	/* Kernel's area_id for the memory mapped registers.
										It will be cloned into the accelerant's	address
										space. */

	area_id	fb_area;	/* Frame buffer's area_id.  The addresses are shared with all teams. */
	area_id pseudo_dma_area;	/* Pseudo dma area_id. Shared by all teams. */
	area_id	dma_buffer_area;	/* Area assigned for dma*/

	void	*framebuffer;		/* As viewed from virtual memory */
	void	*framebuffer_pci;	/* As viewed from the PCI bus (for DMA) */

	void	*pseudo_dma;		/* As viewed from virtual memory */

	void	*dma_buffer;		/* buffer for dma*/
	void	*dma_buffer_pci;	/* buffer for dma - from PCI bus*/

  /*screenmode list*/
	area_id	mode_area;              /* Contains the list of display modes the driver supports */
	uint32	mode_count;             /* Number of display modes in the list */

  /*flags - used by driver*/
	uint32 flags;

  /*vblank semaphore*/
	sem_id	vblank;	                /* The vertical blank semaphore. Ownership will be
						transfered to the team opening the device first */
  /*cursor information*/
	struct {
		uint16	hot_x;		/* Cursor hot spot. The top left corner of the cursor */
		uint16	hot_y;		/* is 0,0 */
		uint16	x;		/* The location of the cursor hot spot on the */
		uint16	y;		/* desktop */
		uint16	width;		/* Width and height of the cursor shape (always 16!) */
		uint16	height;
		bool	is_visible;	/* Is the cursor currently displayed? */
	} cursor;

  /*colour lookup table*/
	uint8	color_data[3 * 256];	/* Colour lookup table - as used by DAC */

  /*more display mode stuff*/
	display_mode dm;		/* current display mode configuration: head1 */
	uint32 dpms_flags;		/* current DPMS mode */
	bool acc_mode;			/* signals (non)accelerated mode */

  /*frame buffer config - for BDirectScreen*/
	frame_buffer_config fbc;	/* bytes_per_row and start of frame buffer: head1 */
	accelerant_device_info adi;	/* as returned by hook GET_ACCELERANT_DEVICE_INFO */

  /*acceleration engine*/
	struct {
		uint32		count;		/* last dwgsync slot used */
		uint32		last_idle;	/* last dwgsync slot we *know* the engine was idle after */ 
		benaphore	lock;		/* for serializing access to the acceleration engine */
		uint32		control;	/* colordepth, memory pitch and other config stuff */
		uint8		depth;		/* bytes per pixel used */
	} engine;

  /* card info - information gathered from PINS (and other sources) */
	enum
	{	// card_type in order of date of nm chip design
	    NM2070 = 0,
    	NM2090,
   		NM2093,
    	NM2097,
    	NM2160,
    	NM2200,
    	NM2230,
    	NM2360,
    	NM2380
	};
	struct
	{
		/* specialised registers for predefined cardspecs */

		/* general card information */
		uint32 card_type;           /* see card_type enum above */
		bool int_assigned;			/* card has a useable INT assigned to it */

		/* PINS */
		float f_ref;				/* PLL reference-oscillator frequency (Mhz) */
		uint32 max_system_vco;		/* graphics engine PLL VCO limits (Mhz) */
		uint32 min_system_vco;
		uint32 max_pixel_vco;		/* dac1 PLL VCO limits (Mhz) */
		uint32 min_pixel_vco;
		uint32 std_engine_clock;	/* graphics engine clock speed needed (Mhz) */
		uint32 max_dac1_clock;		/* dac1 limits (Mhz) */
		uint32 max_dac1_clock_8;	/* dac1 limits correlated to RAMspeed limits (Mhz) */
		uint32 max_dac1_clock_16;
		uint32 max_dac1_clock_24;
		uint32 memory_size;			/* memory (Kbytes) */
		uint32 curmem_size;			/* memory (bytes) */
		uint16 max_crtc_width;		/* CRTC max constraints */
		uint16 max_crtc_height;
		uint8 panel_type;			/* panel type */
		uint16 panel_width;			/* panel size */
		uint16 panel_height;
		uint8 outputs;				/* in BIOS preselected output(s) */
	} ps;

  /*mirror of the ROM (copied in driver, because may not be mapped permanently - only over fb)*/
	uint8 rom_mirror[65536];

  /* apsed: some configuration settings from ~/config/settings/kernel/drivers/nm.settings if exists */
	settings settings;

	struct
	{
		overlay_buffer myBuffer[MAXBUFFERS];/* scaler input buffers */
		int_buf_info myBufInfo[MAXBUFFERS];	/* extra info on scaler input buffers */
		overlay_token myToken;				/* scaler is free/in use */
		benaphore lock;						/* for creating buffers and aquiring overlay unit routines */
		/* variables needed for virtualscreens (move_overlay()): */
		bool active;						/* true is overlay currently in use */
		overlay_window ow;					/* current position of overlay output window */
		overlay_buffer ob;					/* current inputbuffer in use */
		overlay_view my_ov;					/* current corrected view in inputbuffer */
		uint32 h_ifactor;					/* current 'unclipped' horizontal inverse scaling factor */
		uint32 v_ifactor;					/* current 'unclipped' vertical inverse scaling factor */
	} overlay;
} shared_info;

/* Read or write a value in PCI configuration space */
typedef struct {
	uint32	magic;		/* magic number to make sure the caller groks us */
	uint32	offset;		/* Offset to read/write */
	uint32	size;		/* Number of bytes to transfer */
	uint32	value;		/* The value read or written */
} nm_get_set_pci;

/* Read or write a value in ISA I/O space */
typedef struct {
	uint32	magic;		/* magic number to make sure the caller groks us */
	uint16	adress;		/* Offset to read/write */
	uint8	size;		/* Number of bytes to transfer */
	uint16	data;		/* The value read or written */
} nm_in_out_isa;

/* move_overlay related info */
typedef struct {
	uint32 hcoordv;		/* left and right edges of video output window */
	uint32 vcoordv;		/* top and bottom edges of video output window */
	uint32 hsrcendv;	/* horizontal source end in source buffer (clipping) */
	uint32 a1orgv;		/* vertical source clipping via startadress of source buffer */
} move_overlay_info;

/* setup ISA BES registers for overlay on ISA cards */
typedef struct {
	uint32	magic;		/* magic number to make sure the caller groks us */
	uint32  card_type;  /* see card_type enum above */
	uint32  hiscalv;
	uint32  viscalv;
	uint32  globctlv;
	uint32  weight;
	uint8	colkey_r;
	uint8	colkey_g;
	uint8	colkey_b;
	uint16	ob_width;
	move_overlay_info moi;
	bool	move_only;
} nm_bes_data;

/* Set some boolean condition (like enabling or disabling interrupts) */
typedef struct {
	uint32	magic;		/* magic number to make sure the caller groks us */
	bool	do_it;		/* state to set */
} nm_set_bool_state;

/* Retrieve the area_id of the kernel/accelerant shared info */
typedef struct {
	uint32	magic;		/* magic number to make sure the caller groks us */
	area_id	shared_info_area;	/* area_id containing the shared information */
} nm_get_private_data;

/* Retrieve the device name.  Usefull for when we have a file handle, but want
to know the device name (like when we are cloning the accelerant) */
typedef struct {
	uint32	magic;		/* magic number to make sure the caller groks us */
	char	*name;		/* The name of the device, less the /dev root */
} nm_device_name;

enum {
	
	_WAIT_FOR_VBLANK = (1 << 0)
};

#if defined(__cplusplus)
}
#endif


#endif