Aren/haiku
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
bb2ee4164b
haiku/headers/os/device/CAM.h
Tyler Dauwalder 18940d3246 Missing headers needed for disk scanner cd rom session moduless 
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@2324 a95241bf-73f2-0310-859d-f6bbb57e9c96
2002-12-31 07:20:31 +00:00

712 lines
28 KiB
C
Raw Blame History

/* ++++++++++
CAM.h
Copyright (c) 1996-98 by Be Incorporated. All Rights Reserved.
Definitions for the SCSI Common Access Method as implemented in the Be OS.
See also "Draft Proposed American National Standard, SCSI-2 Common
Access Method Transport and SCSI Interface Module", Revision 12,
ANSI refernce number X3.232-199x.
This file consists of the definitions for the fictional "UNIVOS"
operating system described in the standard. The file is mostly
the same text as the standard, with Be-provided additions as needed.
+++++ */
#ifndef _CAM_H
#define _CAM_H
#include <bus_manager.h>
/* ---
Be-provided additions to the standard include file.
--- */
#include <sys/types.h>
#ifdef __cplusplus
extern "C" {
#endif
#ifndef U32
typedef unsigned long U32;
#endif
#ifndef I32
typedef long I32;
#endif
#ifndef U16
typedef unsigned short U16;
#endif
typedef struct {
uint32 serial; /* operation serial number */
uint32 micros; /* operation time in microseconds (4294s max) */
uint32 bytes; /* number of bytes to transfer */
uchar path; /* target SIM ID */
uchar target; /* target device ID */
uchar sgcount; /* # of sg segments (0 if non-sg operation) */
uchar scsi_op; /* scsi operation byte */
} cam_iostat;
/* -----
The rest of this file contains the definitions and data structures for
the CAM Subsystem interface. The contents of this file should match the
data structures and constants that are specified in the CAM document
----- */
/* Defines for the XPT function codes, Table 8-2 in the CAM spec. */
/* Common function commands, 0x00 - 0x0F */
#define XPT_NOOP 0x00 /* Execute Nothing */
#define XPT_SCSI_IO 0x01 /* Execute the requested SCSI IO */
#define XPT_GDEV_TYPE 0x02 /* Get the device type information */
#define XPT_PATH_INQ 0x03 /* Path Inquiry */
#define XPT_REL_SIMQ 0x04 /* Release the SIM queue that is frozen */
#define XPT_SASYNC_CB 0x05 /* Set Async callback parameters */
#define XPT_SDEV_TYPE 0x06 /* Set the device type information */
#define XPT_SCAN_BUS 0x07 /* Scan the Scsi Bus */
/* XPT SCSI control functions, 0x10 - 0x1F */
#define XPT_ABORT 0x10 /* Abort the selected CCB */
#define XPT_RESET_BUS 0x11 /* Reset the SCSI bus */
#define XPT_RESET_DEV 0x12 /* Reset the SCSI device, BDR */
#define XPT_TERM_IO 0x13 /* Terminate the I/O process */
/* HBA engine commands, 0x20 - 0x2F */
#define XPT_ENG_INQ 0x20 /* HBA engine inquiry */
#define XPT_ENG_EXEC 0x21 /* HBA execute engine request */
/* Target mode commands, 0x30 - 0x3F */
#define XPT_EN_LUN 0x30 /* Enable LUN, Target mode support */
#define XPT_TARGET_IO 0x31 /* Execute the target IO request */
#define XPT_ACCEPT_TARG 0x32 /* Accept Host Target Mode CDB */
#define XPT_CONT_TARG 0x33 /* Cont. Host Target I/O Connection */
#define XPT_IMMED_NOTIFY 0x34 /* Notify Host Target driver of event*/
#define XPT_NOTIFY_ACK 0x35 /* Acknowledgement of event */
#define XPT_FUNC 0x7F /* TEMPLATE */
#define XPT_VUNIQUE 0x80 /* All the rest are vendor unique commands */
/* ---------------------------------------------------------------------- */
/* General allocation length defines for the CCB structures. */
#define IOCDBLEN 12 /* Space for the CDB bytes/pointer */
#define VUHBA 14 /* Vendor Unique HBA length */
#define SIM_ID 16 /* ASCII string len for SIM ID */
#define HBA_ID 16 /* ASCII string len for HBA ID */
#define BE_SIM_CCB_SIZE 1536 /* we want to allocate 1.5k chunks */
#define BE_SIM_SCSIIO_SIZE 88 /* sizeof(CAM_CCB_SCSIIO) - SIM_PRIV */
#define SIM_PRIV (BE_SIM_CCB_SIZE - BE_SIM_SCSIIO_SIZE) /* Length of SIM private data area */
/* SIM_PRIV (sim private data area) Terms and Conditions:
- the size of SIM_PRIV shall be such that sizeof(CCB_SIZE_UNION) = 1.5k
- all CCB's shall be allocated from locked, contiguous memory
- CCB's shall be aligned on 512 byte boundaries
- SIM_PRIV will be >= 1408 bytes
- this provides 128 8byte sg entries (512mb worth of pages, worstcase fragmentation)
- and 256 bytes for sense data and 128 bytes for whatever else the SIM needs
- These conditions are NULL and (void) where prohibited by law.
- All sales are final.
- Do not use near open flame.
*/
/* Structure definitions for the CAM control blocks, CCB's for the
subsystem. */
/* Common CCB header definition. */
typedef struct ccb_header
{
uint32 phys_addr; /* physical address of this CCB */
uint16 cam_ccb_len; /* Length of the entire CCB */
uchar cam_func_code; /* XPT function code */
uchar cam_status; /* Returned CAM subsystem status */
uchar cam_hrsvd0; /* Reserved field, for alignment */
uchar cam_path_id; /* Path ID for the request */
uchar cam_target_id; /* Target device ID */
uchar cam_target_lun; /* Target LUN number */
uint32 cam_flags; /* Flags for operation of the subsystem */
} CCB_HEADER;
/* Common SCSI functions. */
/* Union definition for the CDB space in the SCSI I/O request CCB */
typedef union cdb_un
{
uchar *cam_cdb_ptr; /* Pointer to the CDB bytes to send */
uchar cam_cdb_bytes[ IOCDBLEN ]; /* Area for the CDB to send */
} CDB_UN;
/* Get device type CCB */
typedef struct ccb_getdev
{
CCB_HEADER cam_ch; /* Header information fields */
char *cam_inq_data; /* Ptr to the inquiry data space */
uchar cam_pd_type; /* Periph device type from the TLUN */
} CCB_GETDEV;
/* Path inquiry CCB */
typedef struct ccb_pathinq
{
CCB_HEADER cam_ch; /* Header information fields */
uchar cam_version_num; /* Version number for the SIM/HBA */
uchar cam_hba_inquiry; /* Mimic of INQ byte 7 for the HBA */
uchar cam_target_sprt; /* Flags for target mode support */
uchar cam_hba_misc; /* Misc HBA feature flags */
uint16 cam_hba_eng_cnt; /* HBA engine count */
uchar cam_vuhba_flags[ VUHBA ]; /* Vendor unique capabilities */
uint32 cam_sim_priv; /* Size of SIM private data area */
uint32 cam_async_flags; /* Event cap. for Async Callback */
uchar cam_hpath_id; /* Highest path ID in the subsystem */
uchar cam_initiator_id; /* ID of the HBA on the SCSI bus */
uchar cam_prsvd0; /* Reserved field, for alignment */
uchar cam_prsvd1; /* Reserved field, for alignment */
char cam_sim_vid[ SIM_ID ]; /* Vendor ID of the SIM */
char cam_hba_vid[ HBA_ID ]; /* Vendor ID of the HBA */
uchar *cam_osd_usage; /* Ptr for the OSD specific area */
} CCB_PATHINQ;
/* Release SIM Queue CCB */
typedef struct ccb_relsim
{
CCB_HEADER cam_ch; /* Header information fields */
} CCB_RELSIM;
/* SCSI I/O Request CCB */
typedef struct ccb_scsiio
{
CCB_HEADER cam_ch; /* Header information fields */
uchar *cam_pdrv_ptr; /* Ptr used by the Peripheral driver */
CCB_HEADER *cam_next_ccb; /* Ptr to the next CCB for action */
uchar *cam_req_map; /* Ptr for mapping info on the Req. */
void (*cam_cbfcnp)(struct ccb_scsiio *);
/* Callback on completion function */
uchar *cam_data_ptr; /* Pointer to the data buf/SG list */
uint32 cam_dxfer_len; /* Data xfer length */
uchar *cam_sense_ptr; /* Pointer to the sense data buffer */
uchar cam_sense_len; /* Num of bytes in the Autosense buf */
uchar cam_cdb_len; /* Number of bytes for the CDB */
uint16 cam_sglist_cnt; /* Num of scatter gather list entries */
uint32 cam_sort; /* Value used by SIM to sort on */
uchar cam_scsi_status; /* Returned scsi device status */
uchar cam_sense_resid; /* Autosense resid length: 2's comp */
uchar cam_osd_rsvd1[2]; /* OSD Reserved field, for alignment */
int32 cam_resid; /* Transfer residual length: 2's comp */
CDB_UN cam_cdb_io; /* Union for CDB bytes/pointer */
uint32 cam_timeout; /* Timeout value */
uchar *cam_msg_ptr; /* Pointer to the message buffer */
uint16 cam_msgb_len; /* Num of bytes in the message buf */
uint16 cam_vu_flags; /* Vendor unique flags */
uchar cam_tag_action; /* What to do for tag queuing */
uchar cam_iorsvd0[3]; /* Reserved field, for alignment */
uchar cam_sim_priv[ SIM_PRIV ]; /* SIM private data area */
} CCB_SCSIIO;
/* Set Async Callback CCB */
typedef struct ccb_setasync
{
CCB_HEADER cam_ch; /* Header information fields */
uint32 cam_async_flags; /* Event enables for Callback resp */
void (*cam_async_func)(); /* Async Callback function address */
uchar *pdrv_buf; /* Buffer set aside by the Per. drv */
uchar pdrv_buf_len; /* The size of the buffer */
} CCB_SETASYNC;
/* Set device type CCB */
typedef struct ccb_setdev
{
CCB_HEADER cam_ch; /* Header information fields */
uchar cam_dev_type; /* Val for the dev type field in EDT */
} CCB_SETDEV;
/* SCSI Control Functions. */
/* Abort XPT Request CCB */
typedef struct ccb_abort
{
CCB_HEADER cam_ch; /* Header information fields */
CCB_HEADER *cam_abort_ch; /* Pointer to the CCB to abort */
} CCB_ABORT;
/* Reset SCSI Bus CCB */
typedef struct ccb_resetbus
{
CCB_HEADER cam_ch; /* Header information fields */
} CCB_RESETBUS;
/* Reset SCSI Device CCB */
typedef struct ccb_resetdev
{
CCB_HEADER cam_ch; /* Header information fields */
} CCB_RESETDEV;
/* Terminate I/O Process Request CCB */
typedef struct ccb_termio
{
CCB_HEADER cam_ch; /* Header information fields */
CCB_HEADER *cam_termio_ch; /* Pointer to the CCB to terminate */
} CCB_TERMIO;
/* Target mode structures. */
/* Host Target Mode Version 1 Enable LUN CCB */
typedef struct ccb_en_lun
{
CCB_HEADER cam_ch; /* Header information fields */
uint16 cam_grp6_len; /* Group 6 VU CDB length */
uint16 cam_grp7_len; /* Group 7 VU CDB length */
uchar *cam_ccb_listptr; /* Pointer to the target CCB list */
uint16 cam_ccb_listcnt; /* Count of Target CCBs in the list */
} CCB_EN_LUN;
/* Enable LUN CCB (HTM V2) */
typedef struct ccb_enable_lun
{
CCB_HEADER cam_ch; /* Header information fields */
uint16 cam_grp6_length; /* Group 6 Vendor Unique CDB Lengths */
uint16 cam_grp7_length; /* Group 7 Vendor Unique CDB Lengths */
uchar *cam_immed_notify_list; /* Ptr to Immediate Notify CCB list */
uint32 cam_immed_notify_cnt; /* Number of Immediate Notify CCBs */
uchar *cam_accept_targ_list; /* Ptr to Accept Target I/O CCB list */
uint32 cam_accept_targ_cnt; /* Number of Accept Target I/O CCBs */
uchar cam_sim_priv[ SIM_PRIV ]; /* SIM private data area */
} CCB_ENABLE_LUN;
/* Immediate Notify CCB */
typedef struct ccb_immed_notify
{
CCB_HEADER cam_ch; /* Header information fields */
uchar *cam_pdrv_ptr; /* Ptr used by the Peripheral driver */
void (*cam_cbfnot)(); /* Callback on notification function */
uchar *cam_sense_ptr; /* Pointer to the sense data buffer */
uchar cam_sense_len; /* Num of bytes in the Autosense buf */
uchar cam_init_id; /* ID of Initiator that selected */
uint16 cam_seq_id; /* Sequence Identifier */
uchar cam_msg_code; /* Message Code */
uchar cam_msg_args[7]; /* Message Arguments */
} CCB_IMMED_NOTIFY;
/* Notify Acknowledge CCB */
typedef struct ccb_notify_ack
{
CCB_HEADER cam_ch; /* Header information fields */
uint16 cam_seq_id; /* Sequence Identifier */
uchar cam_event; /* Event */
uchar cam_rsvd;
} CCB_NOTIFY_ACK;
/* Accept Target I/O CCB */
typedef struct ccb_accept_targ
{
CCB_HEADER cam_ch; /* Header information fields */
uchar *cam_pdrv_ptr; /* Ptr used by the Peripheral driver */
CCB_HEADER *cam_next_ccb; /* Ptr to the next CCB for action */
uchar *cam_req_map; /* Ptr for mapping info on the Req. */
void (*cam_cbfcnot)(); /* Callback on completion function */
uchar *cam_data_ptr; /* Pointer to the data buf/SG list */
uint32 cam_dxfer_len; /* Data xfer length */
uchar *cam_sense_ptr; /* Pointer to the sense data buffer */
uchar cam_sense_len; /* Num of bytes in the Autosense buf */
uchar cam_cdb_len; /* Number of bytes for the CDB */
uint16 cam_sglist_cnt; /* Num of scatter gather list entries */
uint32 cam_sort; /* Value used by SIM to sort on */
uchar cam_scsi_status; /* Returned scsi device status */
uchar cam_sense_resid; /* Autosense resid length: 2's comp */
uchar cam_osd_rsvd1[2]; /* OSD Reserved field, for alignment */
int32 cam_resid; /* Transfer residual length: 2's comp */
CDB_UN cam_cdb_io; /* Union for CDB bytes/pointer */
uint32 cam_timeout; /* Timeout value */
uchar *cam_msg_ptr; /* Pointer to the message buffer */
uint16 cam_msgb_len; /* Num of bytes in the message buf */
uint16 cam_vu_flags; /* Vendor unique flags */
uchar cam_tag_action; /* What to do for tag queuing */
uchar cam_tag_id; /* Tag ID */
uchar cam_initiator_id; /* Initiator ID */
uchar cam_iorsvd0[1]; /* Reserved field, for alignment */
uchar cam_sim_priv[ SIM_PRIV ]; /* SIM private data area */
} CCB_ACCEPT_TARG;
/* Continue Target I/O CCB */
typedef CCB_ACCEPT_TARG CCB_CONT_TARG;
/* HBA engine structures. */
typedef struct ccb_eng_inq
{
CCB_HEADER cam_ch; /* Header information fields */
uint16 cam_eng_num; /* The number for this inquiry */
uchar cam_eng_type; /* Returned engine type */
uchar cam_eng_algo; /* Returned algorithm type */
uint32 cam_eng_memory; /* Returned engine memory size */
} CCB_ENG_INQ;
typedef struct ccb_eng_exec /* NOTE: must match SCSIIO size */
{
CCB_HEADER cam_ch; /* Header information fields */
uchar *cam_pdrv_ptr; /* Ptr used by the Peripheral driver */
uint32 cam_engrsvd0; /* Reserved field, for alignment */
uchar *cam_req_map; /* Ptr for mapping info on the Req. */
void (*cam_cbfcnp)(); /* Callback on completion function */
uchar *cam_data_ptr; /* Pointer to the data buf/SG list */
uint32 cam_dxfer_len; /* Data xfer length */
uchar *cam_engdata_ptr; /* Pointer to the engine buffer data */
uchar cam_engrsvd1; /* Reserved field, for alignment */
uchar cam_engrsvd2; /* Reserved field, for alignment */
uint16 cam_sglist_cnt; /* Num of scatter gather list entries */
uint32 cam_dmax_len; /* Destination data maximum length */
uint32 cam_dest_len; /* Destination data length */
int32 cam_src_resid; /* Source residual length: 2's comp */
uchar cam_engrsvd3[12]; /* Reserved field, for alignment */
uint32 cam_timeout; /* Timeout value */
uint32 cam_engrsvd4; /* Reserved field, for alignment */
uint16 cam_eng_num; /* Engine number for this request */
uint16 cam_vu_flags; /* Vendor unique flags */
uchar cam_engrsvd5; /* Reserved field, for alignment */
uchar cam_engrsvd6[3]; /* Reserved field, for alignment */
uchar cam_sim_priv[ SIM_PRIV ]; /* SIM private data area */
} CCB_ENG_EXEC;
/* The sim_module_info definition is used to define the entry points for
the SIMs contained in the SCSI CAM subsystem. Each SIM file will
contain a declaration for it's entry. The address for this entry will
be stored in the cam_conftbl[] array along will all the other SIM
entries. */
typedef struct sim_module_info sim_module_info;
struct sim_module_info {
module_info minfo;
};
typedef struct CAM_SIM_ENTRY CAM_SIM_ENTRY;
struct CAM_SIM_ENTRY {
status_t (*sim_init)();
int32 (*sim_action)();
};
/* ---------------------------------------------------------------------- */
/* Defines for the CAM status field in the CCB header. */
#define CAM_REQ_INPROG 0x00 /* CCB request is in progress */
#define CAM_REQ_CMP 0x01 /* CCB request completed w/out error */
#define CAM_REQ_ABORTED 0x02 /* CCB request aborted by the host */
#define CAM_UA_ABORT 0x03 /* Unable to Abort CCB request */
#define CAM_REQ_CMP_ERR 0x04 /* CCB request completed with an err */
#define CAM_BUSY 0x05 /* CAM subsystem is busy */
#define CAM_REQ_INVALID 0x06 /* CCB request is invalid */
#define CAM_PATH_INVALID 0x07 /* Path ID supplied is invalid */
#define CAM_DEV_NOT_THERE 0x08 /* SCSI device not installed/there */
#define CAM_UA_TERMIO 0x09 /* Unable to Terminate I/O CCB req */
#define CAM_SEL_TIMEOUT 0x0A /* Target selection timeout */
#define CAM_CMD_TIMEOUT 0x0B /* Command timeout */
#define CAM_MSG_REJECT_REC 0x0D /* Message reject received */
#define CAM_SCSI_BUS_RESET 0x0E /* SCSI bus reset sent/received */
#define CAM_UNCOR_PARITY 0x0F /* Uncorrectable parity err occurred */
#define CAM_AUTOSENSE_FAIL 0x10 /* Autosense: Request sense cmd fail */
#define CAM_NO_HBA 0x11 /* No HBA detected Error */
#define CAM_DATA_RUN_ERR 0x12 /* Data overrun/underrun error */
#define CAM_UNEXP_BUSFREE 0x13 /* Unexpected BUS free */
#define CAM_SEQUENCE_FAIL 0x14 /* Target bus phase sequence failure */
#define CAM_CCB_LEN_ERR 0x15 /* CCB length supplied is inadequate */
#define CAM_PROVIDE_FAIL 0x16 /* Unable to provide requ. capability */
#define CAM_BDR_SENT 0x17 /* A SCSI BDR msg was sent to target */
#define CAM_REQ_TERMIO 0x18 /* CCB request terminated by the host */
#define CAM_HBA_ERR 0x19 /* Unrecoverable host bus adaptor err*/
#define CAM_BUS_RESET_DENIED 0x1A /* SCSI bus reset denied */
#define CAM_IDE 0x33 /* Initiator Detected Error Received */
#define CAM_RESRC_UNAVAIL 0x34 /* Resource unavailable */
#define CAM_UNACKED_EVENT 0x35 /* Unacknowledged event by host */
#define CAM_MESSAGE_RECV 0x36 /* Msg received in Host Target Mode */
#define CAM_INVALID_CDB 0x37 /* Invalid CDB recvd in HT Mode */
#define CAM_LUN_INVALID 0x38 /* LUN supplied is invalid */
#define CAM_TID_INVALID 0x39 /* Target ID supplied is invalid */
#define CAM_FUNC_NOTAVAIL 0x3A /* The requ. func is not available */
#define CAM_NO_NEXUS 0x3B /* Nexus is not established */
#define CAM_IID_INVALID 0x3C /* The initiator ID is invalid */
#define CAM_CDB_RECVD 0x3D /* The SCSI CDB has been received */
#define CAM_LUN_ALLREADY_ENAB 0x3E /* LUN already enabled */
#define CAM_SCSI_BUSY 0x3F /* SCSI bus busy */
#define CAM_SIM_QFRZN 0x40 /* The SIM queue is frozen w/this err */
#define CAM_AUTOSNS_VALID 0x80 /* Autosense data valid for target */
#define CAM_STATUS_MASK 0x3F /* Mask bits for just the status # */
/* ---------------------------------------------------------------------- */
/* Defines for the CAM flags field in the CCB header. */
#define CAM_DIR_RESV 0x00000000 /* Data direction (00: reserved) */
#define CAM_DIR_IN 0x00000040 /* Data direction (01: DATA IN) */
#define CAM_DIR_OUT 0x00000080 /* Data direction (10: DATA OUT) */
#define CAM_DIR_NONE 0x000000C0 /* Data direction (11: no data) */
#define CAM_DIS_AUTOSENSE 0x00000020 /* Disable autosense feature */
#define CAM_SCATTER_VALID 0x00000010 /* Scatter/gather list is valid */
#define CAM_DIS_CALLBACK 0x00000008 /* Disable callback feature */
#define CAM_CDB_LINKED 0x00000004 /* The CCB contains a linked CDB */
#define CAM_QUEUE_ENABLE 0x00000002 /* SIM queue actions are enabled */
#define CAM_CDB_POINTER 0x00000001 /* The CDB field contains a pointer */
#define CAM_DIS_DISCONNECT 0x00008000 /* Disable disconnect */
#define CAM_INITIATE_SYNC 0x00004000 /* Attempt Sync data xfer, and SDTR */
#define CAM_DIS_SYNC 0x00002000 /* Disable sync, go to async */
#define CAM_SIM_QHEAD 0x00001000 /* Place CCB at the head of SIM Q */
#define CAM_SIM_QFREEZE 0x00000800 /* Return the SIM Q to frozen state */
#define CAM_SIM_QFRZDIS 0x00000400 /* Disable the SIM Q frozen state */
#define CAM_ENG_SYNC 0x00000200 /* Flush resid bytes before cmplt */
#define CAM_ENG_SGLIST 0x00800000 /* The SG list is for the HBA engine */
#define CAM_CDB_PHYS 0x00400000 /* CDB pointer is physical */
#define CAM_DATA_PHYS 0x00200000 /* SG/Buffer data ptrs are physical */
#define CAM_SNS_BUF_PHYS 0x00100000 /* Autosense data ptr is physical */
#define CAM_MSG_BUF_PHYS 0x00080000 /* Message buffer ptr is physical */
#define CAM_NXT_CCB_PHYS 0x00040000 /* Next CCB pointer is physical */
#define CAM_CALLBCK_PHYS 0x00020000 /* Callback func ptr is physical */
#define CAM_SEND_STATUS 0x80000000 /* Send status after date phase */
#define CAM_DISCONNECT 0x40000000 /* Disc. mandatory after cdb recv */
#define CAM_TERM_IO 0x20000000 /* Terminate I/O Message supported */
#define CAM_DATAB_VALID 0x80000000 /* Data buffer valid */
#define CAM_STATUS_VALID 0x40000000 /* Status buffer valid */
#define CAM_MSGB_VALID 0x20000000 /* Message buffer valid */
#define CAM_TGT_PHASE_MODE 0x08000000 /* The SIM will run in phase mode */
#define CAM_TGT_CCB_AVAIL 0x04000000 /* Target CCB available */
#define CAM_DIS_AUTODISC 0x02000000 /* Disable autodisconnect */
#define CAM_DIS_AUTOSRP 0x01000000 /* Disable autosave/restore ptrs */
/* ---------------------------------------------------------------------- */
/* Defines for the SIM/HBA queue actions. These value are used in the
SCSI I/O CCB, for the queue action field. [These values should match the
defines from some other include file for the SCSI message phases. We may
not need these definitions here. ] */
#define CAM_SIMPLE_QTAG 0x20 /* Tag for a simple queue */
#define CAM_HEAD_QTAG 0x21 /* Tag for head of queue */
#define CAM_ORDERED_QTAG 0x22 /* Tag for ordered queue */
/* ---------------------------------------------------------------------- */
/* Defines for the timeout field in the SCSI I/O CCB. At this time a value
of 0xF-F indicates a infinite timeout. A value of 0x0-0 indicates that the
SIM's default timeout can take effect. */
#define CAM_TIME_DEFAULT 0x00000000 /* Use SIM default value */
#define CAM_TIME_INFINITY 0xFFFFFFFF /* Infinite timeout for I/O */
/* ---------------------------------------------------------------------- */
/* Defines for the Path Inquiry CCB fields. */
#define CAM_VERSION 0x25 /* Binary value for the current ver */
#define PI_MDP_ABLE 0x80 /* Supports MDP message */
#define PI_WIDE_32 0x40 /* Supports 32 bit wide SCSI */
#define PI_WIDE_16 0x20 /* Supports 16 bit wide SCSI */
#define PI_SDTR_ABLE 0x10 /* Supports SDTR message */
#define PI_LINKED_CDB 0x08 /* Supports linked CDBs */
#define PI_TAG_ABLE 0x02 /* Supports tag queue message */
#define PI_SOFT_RST 0x01 /* Supports soft reset */
#define PIT_PROCESSOR 0x80 /* Target mode processor mode */
#define PIT_PHASE 0x40 /* Target mode phase cog. mode */
#define PIM_SCANHILO 0x80 /* Bus scans from ID 7 to ID 0 */
#define PIM_NOREMOVE 0x40 /* Removable dev not included in scan */
#define PIM_NOINQUIRY 0x20 /* Inquiry data not kept by XPT */
/* ---------------------------------------------------------------------- */
/* Defines for Asynchronous Callback CCB fields. */
#define AC_FOUND_DEVICES 0x80 /* During a rescan new device found */
#define AC_SIM_DEREGISTER 0x40 /* A loaded SIM has de-registered */
#define AC_SIM_REGISTER 0x20 /* A loaded SIM has registered */
#define AC_SENT_BDR 0x10 /* A BDR message was sent to target */
#define AC_SCSI_AEN 0x08 /* A SCSI AEN has been received */
#define AC_UNSOL_RESEL 0x02 /* A unsolicited reselection occurred */
#define AC_BUS_RESET 0x01 /* A SCSI bus RESET occurred */
/* ---------------------------------------------------------------------- */
/* Typedef for a scatter/gather list element. */
typedef struct sg_elem
{
uchar *cam_sg_address; /* Scatter/Gather address */
uint32 cam_sg_count; /* Scatter/Gather count */
} SG_ELEM;
/* ---------------------------------------------------------------------- */
/* Defines for the "event" field in the CCB_NOTIFY_ACK */
#define CAM_RESET_CLEARED 0x80 /* Reset Cleared */
/* ---------------------------------------------------------------------- */
/* Defines for the HBA engine inquiry CCB fields. */
#define EIT_BUFFER 0x00 /* Engine type: Buffer memory */
#define EIT_LOSSLESS 0x01 /* Engine type: Lossless compression */
#define EIT_LOSSLY 0x02 /* Engine type: Lossly compression */
#define EIT_ENCRYPT 0x03 /* Engine type: Encryption */
#define EAD_VUNIQUE 0x00 /* Eng algorithm ID: vendor unique */
#define EAD_LZ1V1 0x00 /* Eng algorithm ID: LZ1 var. 1*/
#define EAD_LZ2V1 0x00 /* Eng algorithm ID: LZ2 var. 1*/
#define EAD_LZ2V2 0x00 /* Eng algorithm ID: LZ2 var. 2*/
/* ---------------------------------------------------------------------- */
/* ---------------------------------------------------------------------- */
/* Unix OSD defines and data structures. */
#define INQLEN 36 /* Inquiry string length to store. */
#define CAM_SUCCESS 0 /* For signaling general success */
#define CAM_FAILURE 1 /* For signaling general failure */
#define CAM_FALSE 0 /* General purpose flag value */
#define CAM_TRUE 1 /* General purpose flag value */
#define XPT_CCB_INVALID -1 /* for signaling a bad CCB to free */
/* The typedef for the Async callback information. This structure is used to
store the supplied info from the Set Async Callback CCB, in the EDT table
in a linked list structure. */
typedef struct async_info
{
struct async_info *cam_async_next; /* pointer to the next structure */
uint32 cam_event_enable; /* Event enables for Callback resp */
void (*cam_async_func)(); /* Async Callback function address */
uint32 cam_async_blen; /* Length of "information" buffer */
uchar *cam_async_ptr; /* Address for the "information */
} ASYNC_INFO;
/* The CAM EDT table contains the device information for all the
devices, SCSI ID and LUN, for all the SCSI busses in the system. The
table contains a CAM_EDT_ENTRY structure for each device on the bus.
*/
typedef struct cam_edt_entry
{
int32 cam_tlun_found; /* Flag for the existence of the target/LUN */
ASYNC_INFO *cam_ainfo; /* Async callback list info for this B/T/L */
uint32 cam_owner_tag; /* Tag for the peripheral driver's ownership */
char cam_inq_data[ INQLEN ]; /* storage for the inquiry data */
} CAM_EDT_ENTRY;
/* ============================================================================== */
/* ----------------------------- VENDOR UNIQUE DATA ----------------------------- */
/* ============================================================================== */
/* ---
Vendor unique XPT function codes
--- */
#define XPT_EXTENDED_PATH_INQ (XPT_VUNIQUE + 1) /* Extended Path Inquiry */
/* Extended path inquiry CCB */
#define FAM_ID 16 /* ASCII string len for FAMILY ID */
#define TYPE_ID 16 /* ASCII string len for TYPE ID */
#define VERS 8 /* ASCII string len for SIM & HBA vers */
typedef struct ccb_extended_pathinq
{
CCB_PATHINQ cam_path; /* Default path inquiry */
char cam_sim_version [ VERS ]; /* SIM version number */
char cam_hba_version [ VERS ]; /* HBA version number */
char cam_controller_family [ FAM_ID ]; /* Controller family */
char cam_controller_type [ TYPE_ID ]; /* Controller type */
} CCB_EXTENDED_PATHINQ;
/* ---
Vendor unique flags supported by Be OS (cam_vu_flags)
--- */
enum {
VU_RESERVED_0 = 0x0001,
VU_RESERVED_1 = 0x0002,
VU_DISABLE_SEL_W_ATN = 0x0004,
VU_RESERVED_4 = 0x0008
};
/* ---
XPT interface used by SCSI drivers
--- */
typedef struct cam_for_driver_module_info cam_for_driver_module_info;
struct cam_for_driver_module_info {
bus_manager_info minfo;
CCB_HEADER * (*xpt_ccb_alloc)(void);
void (*xpt_ccb_free)(void *ccb);
long (*xpt_action)(CCB_HEADER *ccbh);
};
#define B_CAM_FOR_DRIVER_MODULE_NAME "bus_managers/scsi/driver/v1"
/* ---
XPT interface used by SCSI SIMs
--- */
typedef struct cam_for_sim_module_info cam_for_sim_module_info;
struct cam_for_sim_module_info {
bus_manager_info minfo;
long (*xpt_bus_register) (CAM_SIM_ENTRY *sim);
long (*xpt_bus_deregister) (long path);
};
#define B_CAM_FOR_SIM_MODULE_NAME "bus_managers/scsi/sim/v1"
/* General Union for Kernel Space allocation. Contains all the possible CCB
structures. This union should never be used for manipulating CCB's its only
use is for the allocation and deallocation of raw CCB space. */
typedef union ccb_size_union
{
CCB_SCSIIO csio; /* Please keep this first, for debug/print */
CCB_GETDEV cgd;
CCB_PATHINQ cpi;
CCB_RELSIM crs;
CCB_SETASYNC csa;
CCB_SETDEV csd;
CCB_ABORT cab;
CCB_RESETBUS crb;
CCB_RESETDEV crd;
CCB_TERMIO ctio;
CCB_EN_LUN cel;
CCB_ENABLE_LUN cel2;
CCB_IMMED_NOTIFY cin;
CCB_NOTIFY_ACK cna;
CCB_ACCEPT_TARG cat;
CCB_ENG_INQ cei;
CCB_ENG_EXEC cee;
CCB_EXTENDED_PATHINQ cdpi;
} CCB_SIZE_UNION;
#ifdef __cplusplus
}
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink