b3d94504c2
-> a USB Mass Storgage module (SCSI bus manager add-on) -> a SiS 7018 AC97 driver (uses "old" audio driver interface) -> a USB Serial driver -> a USB Vision driver and media add-on (Haupauge WinTV USB) * moved R3MediaDefs.h from usb_audio driver to common place headers/private/audio (also used by SiS 7018 driver) * added TV tuner frequency defines to data/settings/media/usb_vision Some of these drivers are in unfinished state, particularily the USB Vision driver, the VideoProducer doesn't seem to use it yet, the USB Mass Storage module is known to work though, it also includes add-ons for itself that add support for some "special" hardware, these are not integrated with the Jamfile build system though. Also I didn't much much time with the "CVS package" targets, the ReadMes are not added, someone with more knowledge about this could add them... None of this stuff is added to the Haiku image, it is simply included to be maintained in the Haiku tree from now on. * fixed a bug in Video Producer sample inherited from Be Sample code - the timing from the time source was not really used, on some systems this could cause in the producer not waking up at the correct time if the system time and audio card time are drifting apart git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17625 a95241bf-73f2-0310-859d-f6bbb57e9c96
115 lines
3.2 KiB
C
115 lines
3.2 KiB
C
/*
|
||
* This file is a part of BeOS USBVision driver project.
|
||
* Copyright (c) 2003 by Siarzuk Zharski <imker@gmx.li>
|
||
*
|
||
* This file may be used under the terms of the BSD License
|
||
* Look into the file "License" for details.
|
||
*
|
||
* Skeletal part of this code was inherired from original BeOS sample code,
|
||
* that is distributed under the terms of the Be Sample Code License.
|
||
* Look into the file "Be License" for details.
|
||
*
|
||
* $Source: /cvsroot/sis4be/usbvision/include/nt100x.h,v $
|
||
* $Author: zharik $
|
||
* $Revision: 1.1 $
|
||
* $Date: 2003/07/15 18:58:05 $
|
||
*
|
||
*/
|
||
|
||
#ifndef _NT100X_H_
|
||
#define _NT100X_H_
|
||
|
||
#define READ_CMD_PREFIX 0x33C2
|
||
#define WRITE_CMD_PREFIX 0x3342
|
||
|
||
#define COMMAND_DATA_LENGTH 0x08
|
||
typedef struct{
|
||
uint8 reg;
|
||
uint8 data_length;
|
||
uint8 data[COMMAND_DATA_LENGTH];
|
||
}xet_nt100x_reg;
|
||
|
||
#define NT_IOCTL_READ_REGISTER B_DEVICE_OP_CODES_END + 1
|
||
#define NT_IOCTL_WRITE_REGISTER B_DEVICE_OP_CODES_END + 2
|
||
|
||
/*General Control Registers (Power, Restart EP, USB, IOpins, Camera Control)*/
|
||
#define PWR_REG 0x00 /*0*/
|
||
#define CONFIG_REG 0x01 /*1*/
|
||
#define ADRS_REG 0x02 /*2*/
|
||
#define ALTER_REG 0x03 /*3*/
|
||
#define FORCE_ALTER_REG 0x04 /*4*/
|
||
#define STATUS_REG 0x05 /*5*/
|
||
#define IOPIN_REG 0x06 /*6*/
|
||
#define SER_MODE 0x07 /*7*/
|
||
#define SER_ADRS 0x08 /*8*/
|
||
#define SER_CONT 0x09 /*9*/
|
||
#define SER_DAT1 0x0a /*10*/
|
||
#define SER_DAT2 0x0b /*11*/
|
||
#define SER_DAT3 0x0c /*12*/
|
||
#define SER_DAT4 0x0d /*13*/
|
||
|
||
/*EEPROM Read/Write Registers*/
|
||
#define EE_DATA 0x0e /*14*/
|
||
#define EE_LSBAD 0x0f /*15*/
|
||
#define EE_CONT 0x10 /*16*/
|
||
|
||
/*17: 0x11*/
|
||
|
||
/*DRAM and Memory Buffers Setup Registers*/
|
||
#define DRM_CONT 0x12 /*18*/
|
||
#define DRM_PRM1 0x13 /*19*/
|
||
#define DRM_PRM2 0x14 /*20*/
|
||
#define DRM_PRM3 0x15 /*21*/
|
||
#define DRM_PRM4 0x16 /*22*/
|
||
#define DRM_PRM5 0x17 /*23*/
|
||
#define DRM_PRM6 0x18 /*24*/
|
||
#define DRM_PRM7 0x19 /*25*/
|
||
#define DRM_PRM8 0x1a /*26*/
|
||
|
||
/*Video Setup and Control Registers*/
|
||
#define VIN_REG1 0x1b /*27*/
|
||
#define VIN_REG2 0x1c /*28*/
|
||
#define LXSIZE_IN 0x1d /*29*/
|
||
#define MXSIZE_IN 0x1e /*30*/
|
||
#define LYSIZE_IN 0x1f /*31*/
|
||
#define MYSIZE_IN 0x20 /*32*/
|
||
#define LX_OFFST 0x21 /*33*/
|
||
#define MX_OFFST 0x22 /*34*/
|
||
#define LY_OFFST 0x23 /*35*/
|
||
#define MY_OFFST 0x24 /*36*/
|
||
#define FRM_RATE 0x25 /*37*/
|
||
#define LXSIZE_O 0x26 /*38*/
|
||
#define MXSIZE_O 0x27 /*39*/
|
||
#define LYSIZE_O 0x28 /*40*/
|
||
#define MYSIZE_O 0x29 /*41*/
|
||
#define FILT_CONT 0x2a /*42*/
|
||
#define VO_MODE 0x2b /*43*/
|
||
#define INTRA_CYC 0x2c /*44*/
|
||
#define STRIP_SZ 0x2d /*45*/
|
||
#define FORCE_INTRA 0x2e /*46*/
|
||
#define FORCE_UP 0x2f /*47*/
|
||
#define BUF_THR 0x30 /*48*/
|
||
#define DVI_YUV 0x31 /*49*/
|
||
#define AUDIO_CONT 0x32 /*50*/
|
||
#define AUD_PK_LEN 0x33 /*51*/
|
||
#define BLK_PK_LEN 0x34 /*52*/
|
||
|
||
/*USB Watch<63>Dog Register*/
|
||
#define WD_COUNT 0x35 /*53*/
|
||
|
||
/*54 0x36*/
|
||
/*55 0x37*/
|
||
|
||
/*Compression Ratio Management Registers*/
|
||
#define PCM_THR1 0x38 /*56*/
|
||
#define PCM_THR2 0x39 /*57*/
|
||
#define DIST_THR_I 0x3a /*58*/
|
||
#define DIST_THR_A 0x3b /*59*/
|
||
#define MAX_DIST_I 0x3c /*60*/
|
||
#define MAX_DIST_A 0x3d /*61*/
|
||
#define VID_BUF_ 0x3e /*62*/
|
||
#define LFP_LSB 0x3f /*63*/
|
||
#define LFP_MSB 0x40 /*64*/
|
||
#define VID_LPF 0x41 /*65*/
|
||
|
||
#endif //_NT100X_H_
|