haiku/headers/private/graphics/nvidia/DriverInterface.h
shatty 2b83f3b47d openBeOS_Nvidia_V0.02_src
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@5447 a95241bf-73f2-0310-859d-f6bbb57e9c96
2003-11-23 04:23:03 +00:00

309 lines
8.7 KiB
C

/*
Copyright 1999, Be Incorporated. All Rights Reserved.
This file may be used under the terms of the Be Sample Code License.
Other authors:
Mark Watson;
Apsed;
Rudolf Cornelissen 10/2002-4/2003.
*/
#ifndef DRIVERINTERFACE_H
#define DRIVERINTERFACE_H
#include <Accelerant.h>
#include "video_overlay.h"
#include <Drivers.h>
#include <PCI.h>
#include <OS.h>
#define DRIVER_PREFIX "nv" // apsed
/*
Internal driver state (also for sharing info between driver and accelerant)
*/
#if defined(__cplusplus)
extern "C" {
#endif
typedef struct {
sem_id sem;
int32 ben;
} benaphore;
#define INIT_BEN(x) x.sem = create_sem(0, "G400 "#x" benaphore"); x.ben = 0;
#define AQUIRE_BEN(x) if((atomic_add(&(x.ben), 1)) >= 1) acquire_sem(x.sem);
#define RELEASE_BEN(x) if((atomic_add(&(x.ben), -1)) > 1) release_sem(x.sem);
#define DELETE_BEN(x) delete_sem(x.sem);
#define NV_PRIVATE_DATA_MAGIC 0x0009 /* a private driver rev, of sorts */
/*dualhead extensions to flags*/
#define DUALHEAD_OFF (0<<6)
#define DUALHEAD_CLONE (1<<6)
#define DUALHEAD_ON (2<<6)
#define DUALHEAD_SWITCH (3<<6)
#define DUALHEAD_BITS (3<<6)
#define DUALHEAD_CAPABLE (1<<8)
#define TV_BITS (3<<9)
#define TV_MON (0<<9
#define TV_PAL (1<<9)
#define TV_NTSC (2<<9)
#define TV_CAPABLE (1<<11)
#define SKD_MOVE_CURSOR 0x00000001
#define SKD_PROGRAM_CLUT 0x00000002
#define SKD_SET_START_ADDR 0x00000004
#define SKD_SET_CURSOR 0x00000008
#define SKD_HANDLER_INSTALLED 0x80000000
enum {
NV_GET_PRIVATE_DATA = B_DEVICE_OP_CODES_END + 1,
NV_GET_PCI,
NV_SET_PCI,
NV_DEVICE_NAME,
NV_RUN_INTERRUPTS
};
/* max. number of overlay buffers */
#define MAXBUFFERS 3
/* max. pixelclock speed the BES supports */
#define BESMAXSPEED 135000
/* internal used info on overlay buffers */
typedef struct
{
uint16 slopspace;
uint32 size;
} int_buf_info;
typedef struct settings { // apsed, see comments in nv.settings
// for driver
char accelerant[B_FILE_NAME_LENGTH];
bool dumprom;
// for accelerant
uint32 logmask;
uint32 memory;
bool usebios;
bool hardcursor;
bool greensync;
} settings;
/*shared info*/
typedef struct {
/*a few ID things*/
uint16 vendor_id; /* PCI vendor ID, from pci_info */
uint16 device_id; /* PCI device ID, from pci_info */
uint8 revision; /* PCI device revsion, from pci_info */
/* bug workaround for 4.5.0 */
uint32 use_clone_bugfix; /*for 4.5.0, cloning of physical memory does not work*/
uint32 * clone_bugfix_regs;
/*memory mappings*/
area_id regs_area; /* Kernel's area_id for the memory mapped registers.
It will be cloned into the accelerant's address
space. */
area_id fb_area; /* Frame buffer's area_id. The addresses are shared with all teams. */
area_id pseudo_dma_area; /* Pseudo dma area_id. Shared by all teams. */
area_id dma_buffer_area; /* Area assigned for dma*/
void *framebuffer; /* As viewed from virtual memory */
void *framebuffer_pci; /* As viewed from the PCI bus (for DMA) */
void *pseudo_dma; /* As viewed from virtual memory */
void *dma_buffer; /* buffer for dma*/
void *dma_buffer_pci; /* buffer for dma - from PCI bus*/
/*screenmode list*/
area_id mode_area; /* Contains the list of display modes the driver supports */
uint32 mode_count; /* Number of display modes in the list */
/*flags - used by driver*/
uint32 flags;
/*vblank semaphore*/
sem_id vblank; /* The vertical blank semaphore. Ownership will be
transfered to the team opening the device first */
/*cursor information*/
struct {
uint16 hot_x; /* Cursor hot spot. The top left corner of the cursor */
uint16 hot_y; /* is 0,0 */
uint16 x; /* The location of the cursor hot spot on the */
uint16 y; /* desktop */
uint16 width; /* Width and height of the cursor shape (always 16!) */
uint16 height;
bool is_visible; /* Is the cursor currently displayed? */
} cursor;
/*colour lookup table*/
uint8 color_data[3 * 256]; /* Colour lookup table - as used by DAC */
/*more display mode stuff*/
display_mode dm; /* current display mode configuration: head1 */
display_mode dm2; /* current display mode configuration: head2 */
bool switched_crtcs; /* dualhead stretch and switch mode info */
bool acc_mode; /* signals (non)accelerated mode */
bool interlaced_tv_mode;/* signals interlaced CRTC TV output mode */
/*frame buffer config - for BDirectScreen*/
frame_buffer_config fbc; /* bytes_per_row and start of frame buffer: head1 */
frame_buffer_config fbc2; /* bytes_per_row and start of frame buffer: head2 */
/*acceleration engine*/
struct {
uint32 count; /* last dwgsync slot used */
uint32 last_idle; /* last dwgsync slot we *know* the engine was idle after */
benaphore lock; /* for serializing access to the acceleration engine */
} engine;
/* card info - information gathered from PINS (and other sources) */
enum
{ // card_type in order of date of NV chip design
NV04 = 0,
NV05,
NV05M64,
NV06,
NV10,
NV11,
NV11M,
NV15,
NV17,
NV17M,
NV18,
NV18M,
NV20,
NV25,
NV28,
NV30,
NV31,
NV34,
NV35,
G550//remove later on
};
enum
{ // card_arch in order of date of NV chip design
NV04A = 0,
NV10A,
NV20A,
NV30A
};
enum
{ // tvout_chip_type in order of capability (more or less)
NONE = 0,
CH7003,
CH7004,
CH7005,
CH7006,
CH7007,
SAA7102,
SAA7108,
BT868,
BT869,
CX25870,
CX25871,
NVIDIA
};
struct
{
/* specialised registers for card initialisation read from NV BIOS (pins) */
/* general card information */
uint32 card_type; /* see card_type enum above */
uint32 card_arch; /* see card_arch enum above */
bool laptop; /* mobile chipset or not ('internal' flatpanel!) */
uint32 tvout_chip_type; /* see tvchip_type enum above */
status_t pins_status; /* B_OK if read correctly, B_ERROR if faked */
bool sdram; /* TRUE if SDRAM card: needed info for 2D acceleration */
/* PINS */
float f_ref; /* PLL reference-oscillator frequency (Mhz) */
uint32 max_system_vco; /* graphics engine PLL VCO limits (Mhz) */
uint32 min_system_vco;
uint32 max_pixel_vco; /* dac1 PLL VCO limits (Mhz) */
uint32 min_pixel_vco;
uint32 max_video_vco; /* dac2, maven PLL VCO limits (Mhz) */
uint32 min_video_vco;
uint32 std_engine_clock; /* graphics engine clock speed needed (Mhz) */
uint32 std_memory_clock; /* card memory clock speed needed (Mhz) */
uint32 max_dac1_clock; /* dac1 limits (Mhz) */
uint32 max_dac1_clock_8; /* dac1 limits correlated to RAMspeed limits (Mhz) */
uint32 max_dac1_clock_16;
uint32 max_dac1_clock_24;
uint32 max_dac1_clock_32;
uint32 max_dac1_clock_32dh;
uint32 max_dac2_clock; /* dac2 limits (Mhz) */
uint32 max_dac2_clock_8; /* dac2, maven limits correlated to RAMspeed limits (Mhz) */
uint32 max_dac2_clock_16;
uint32 max_dac2_clock_24;
uint32 max_dac2_clock_32;
uint32 max_dac2_clock_32dh;
bool secondary_head; /* presence of functions */
bool tvout;
bool primary_dvi;
bool secondary_dvi;
uint32 memory_size; /* memory (Mb) */
} ps;
/*mirror of the ROM (copied in driver, because may not be mapped permanently - only over fb)*/
uint8 rom_mirror[32768];
/*CRTC delay -> used in timing for MAVEN, depending on which CRTC is driving it*/
uint8 crtc_delay;
/* apsed: some configuration settings from ~/config/settings/kernel/drivers/nv.settings if exists */
settings settings;
struct
{
overlay_buffer myBuffer[MAXBUFFERS];/* scaler input buffers */
int_buf_info myBufInfo[MAXBUFFERS]; /* extra info on scaler input buffers */
overlay_token myToken; /* scaler is free/in use */
benaphore lock; /* for creating buffers and aquiring overlay unit routines */
} overlay;
} shared_info;
/* Read or write a value in PCI configuration space */
typedef struct {
uint32 magic; /* magic number to make sure the caller groks us */
uint32 offset; /* Offset to read/write */
uint32 size; /* Number of bytes to transfer */
uint32 value; /* The value read or written */
} nv_get_set_pci;
/* Set some boolean condition (like enabling or disabling interrupts) */
typedef struct {
uint32 magic; /* magic number to make sure the caller groks us */
bool do_it; /* state to set */
} nv_set_bool_state;
/* Retrieve the area_id of the kernel/accelerant shared info */
typedef struct {
uint32 magic; /* magic number to make sure the caller groks us */
area_id shared_info_area; /* area_id containing the shared information */
} nv_get_private_data;
/* Retrieve the device name. Usefull for when we have a file handle, but want
to know the device name (like when we are cloning the accelerant) */
typedef struct {
uint32 magic; /* magic number to make sure the caller groks us */
char *name; /* The name of the device, less the /dev root */
} nv_device_name;
enum {
_WAIT_FOR_VBLANK = (1 << 0)
};
#if defined(__cplusplus)
}
#endif
#endif