123 lines
15 KiB
Plaintext
123 lines
15 KiB
Plaintext
1 english x-vnd.Haiku-Installer 3488795908
|
||
So behind the other menu entries towards the bottom of the file, add something similar to these lines:\n\n InstallerApp 在接近文件末尾，其他菜单条目之后，添加类似于下面的内容：\n\n
|
||
Are you sure you want to abort the installation and restart the system? InstallerWindow 您是否确定终止安装，重新启动系统？
|
||
\t}\n\n InstallerApp \t}\n\n
|
||
Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp 系统安装器\n\t编写者：Jérôme Duval 和 Stephan Aßmus \n\t版权所有 2005-2001 Haiku, Inc.\n\n
|
||
Newer versions of GRUB use an extra configuration file to add custom entries to the boot menu. To add them to the top, you have to create/edit a file by launching your favorite editor from a Terminal like this:\n\n InstallerApp 新的 GRUB 版本使用附加的配置文件以添加自定义条目到引导菜单。如果希望将它们放置在前面，您必须从终端中启动偏好编辑器以创建/编辑文件，如下所示：\n\n
|
||
Here you have to comment out the line \"GRUB_HIDDEN_TIMEOUT=0\" by putting a \"#\" in front of it in order to actually display the boot menu.\n\n InstallerApp 如下，您需要添加 \"#\" 到 \"GRUB_HIDDEN_TIMEOUT=0\" 的行首以注释掉该行，从而显示实际的引导菜单。\n\n
|
||
Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow 系统安装完成。引导扇区已经写入到 '%s'。按下“退出”关闭系统安装器或者另选分区重复安装操作。
|
||
Quit InstallerApp 退出
|
||
Additional disk space required: 0.0 KiB InstallerWindow 需要额外磁盘空间：0.0 KiB
|
||
With GRUB it's: (hdN,n)\n\n InstallerApp 使用 GRUB，如下：(hdN,n)\n\n
|
||
\tsudo update-grub\n\n\n InstallerApp \tsudo update-grub\n\n\n
|
||
Stop InstallerWindow In alert after pressing Stop 暂停
|
||
Install progress: InstallerWindow 安装进度：
|
||
2.2) GRUB 1\n InstallerApp 2.1) GRUB 1\n
|
||
Starting Installation. InstallProgress 启动安装
|
||
This is alpha-quality software! It means there is a high risk of losing important data. Make frequent backups! You have been warned.\n\n\n InstallerApp 这是 测试版本 软件！因此会有很高的丢失数据风险。请经常进行数据的备份！这是我们的善意提醒。
|
||
Are you sure you want to abort the installation? InstallerWindow 您确定要取消安装吗？
|
||
Are you sure you want to install onto the current boot disk? The Installer will have to reboot your machine if you proceed. InstallProgress 您确定安装 Haiku 到当前引导磁盘？如果您继续安装，系统安装器将会重启您的计算机。
|
||
Quit Boot Manager InstallerWindow 退出引导管理器
|
||
Stop InstallerWindow 停止
|
||
\t\tchainloader +1\n InstallerApp \t\tchainloader +1\n
|
||
\tchainloader\t\t+1\n\n InstallerApp \tchainloader\t\t+1\n\n
|
||
OK InstallerApp 确定
|
||
Choose the source and destination disk from the pop-up menus. Then click \"Begin\". InstallerWindow 从弹出菜单中选择源磁盘和目标磁盘。然后点击\"开始\"。
|
||
\t# Haiku on /dev/sda7\n InstallerApp \t# Haiku on /dev/sda7\n
|
||
Install from: InstallerWindow 安装源：
|
||
%1ld of %2ld InstallerWindow number of files copied %1ld来源于%2ld
|
||
IMPORTANT INFORMATION BEFORE INSTALLING HAIKU\n\n InstallerApp 安装必读\n\n
|
||
Continue InstallerWindow In alert after pressing Stop 继续
|
||
Write boot sector to '%s' InstallerWindow 引导扇区写入到 '%s'
|
||
Collecting copy information. InstallProgress 收集复制信息。
|
||
Choose the source disk from the pop-up menu. Then click \"Begin\". InstallerWindow 从弹出菜单中选择源磁盘。然后点击\"开始\"。
|
||
Quit Boot Manager and DriveSetup InstallerWindow 退出引导管理器和磁盘管理器
|
||
Quit InstallerWindow 退出
|
||
Welcome to the Haiku Installer!\n\n InstallerApp 欢迎使用 Haiku 系统安装器!\n\n
|
||
Boot sector successfully written. InstallProgress 引导扇区写入成功。
|
||
Performing installation. InstallProgress 执行安装。
|
||
scanning… InstallerWindow 扫描...
|
||
Set up boot menu InstallerWindow 设置引导菜单
|
||
2.1) GRUB (since os-prober v1.44)\n InstallerApp 2.1) GRUB ( os-prober v1.44 以上版本)\n
|
||
The first logical partition always has the number \"4\", regardless of the number of primary partitions.\n\n InstallerApp 首个逻辑分区的编号总是 \"4\"，
|
||
GRUB's naming scheme is still: (hdN,n)\n\n InstallerApp GRUB 的命名策略仍然是：(hdN,n)\n\n
|
||
\tsudo <your favorite text editor> /boot/grub/menu.lst\n\n InstallerApp \tsudo <偏好文本编辑器> /boot/grub/menu.lst\n\n
|
||
Abort InstallerWindow 取消
|
||
Finishing Installation. InstallProgress 完成安装。
|
||
\tsudo <your favorite text editor> /etc/default/grub\n\n InstallerApp \tsudo <偏好文本编辑器> /etc/default/grub\n\n
|
||
Restart InstallerWindow 重启系统
|
||
README InstallerApp README
|
||
The destination disk may not have enough space. Try choosing a different disk or choose to not install optional items. InstallProgress 目标磁盘可能没有足够的空间。尝试选择其他的磁盘或者选择不安装附加项目。
|
||
Please close the Boot Manager and DriveSetup windows before closing the Installer window. InstallerWindow 请在关闭系统安装器之前关闭引导管理器和磁盘管理器。
|
||
Scanning for disks… InstallerWindow 扫描磁盘...
|
||
2.3) GRUB 2\n InstallerApp 2.2) GRUB 2\n
|
||
The disk can't be mounted. Please choose a different disk. InstallProgress 磁盘无法挂载。请选择其他磁盘。
|
||
?? of ?? InstallerWindow Unknown progress ??来源于??
|
||
\tmenuentry \"Haiku Alpha\" {\n InstallerApp \tmenuentry \"Haiku Alpha\" {\n
|
||
Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow 启动磁盘管理器为\n可用硬盘和其他媒介进行分区。\n分区可以初始化为 Be 文件系统以作为 Haiku 引导分区。
|
||
Show optional packages InstallerWindow 显示附加软件包
|
||
No partitions have been found that are suitable for installation. Please set up partitions and initialize at least one partition with the Be File System. InstallerWindow 未发现可用于安装的分区。请设置分区，并至少将一个分区初始化为 Be 文件系统。
|
||
Additionally you have to edit another file to actually display the boot menu:\n\n InstallerApp 此外，您必须编辑其他文件以显示引导菜单：\n\n
|
||
Choose the disk you want to install onto from the pop-up menu. Then click \"Begin\". InstallerWindow 从弹出菜单中选择希望安装的磁盘。然后点击\"开始\"。
|
||
Unknown Type InstallProgress Partition content type 未知类型
|
||
<none> InstallerWindow No partition available <无>
|
||
\t\tset root=(hd0,7)\n InstallerApp \t\t set root=(hd0,7)\n
|
||
You'll note that GRUB uses a different naming strategy for hard drives than Linux.\n\n InstallerApp 您将会注意到，GRUB 使用了不同于 Linux 的硬盘命名方式。
|
||
\"n\" is the partition number, also starting with \"0\".\n InstallerApp \"n\" 是分区编号，也从 \"0\" 开始。\n
|
||
Installation completed. Boot sector has been written to '%s'. Press Restart to restart the computer or choose a new target volume to perform another installation. InstallerWindow 安装完成.引导扇区已经写入 '%s'.按下重启系统按钮重启计算机或者选择新目标卷执行安装.
|
||
Installation canceled. InstallProgress 安装已取消。
|
||
Installer System name 系统安装器
|
||
You can't install the contents of a disk onto itself. Please choose a different disk. InstallProgress 您无法将磁盘内容进行自我安装。请选择其他磁盘。
|
||
??? InstallerWindow Unknown currently copied item ???
|
||
\"n\" is the partition number, which for GRUB 2 starts with \"1\"\n InstallerApp \"n\" 是分区编号，对于 GRUB 2 ，则以 \"1\" 开始。\n
|
||
Starting with os-prober v1.44 (e.g. in Ubuntu 11.04 or later), Haiku should be recognized out of the box. To add Haiku to the GRUB menu, open a Terminal and enter:\n\n InstallerApp 如果使用 os-prober v1.44（如，Ubuntu 11.04 及其更高版本），Haiku 能够被自动识别。如果希望将 Haiku 加入 GRUB 菜单，打开终端，然后输入：\n\n
|
||
Quit DriveSetup InstallerWindow 退出磁盘管理器
|
||
\"N\" is the hard disk number, starting with \"0\".\n InstallerApp \"N\" 是硬盘编号，以 \"0\" 开始。\n
|
||
Hide optional packages InstallerWindow 隐藏附加软件包
|
||
Please close the DriveSetup window before closing the Installer window. InstallerWindow 请在关闭系统安装器前关闭磁盘管理器。
|
||
Restart system InstallerWindow 重启系统
|
||
OK InstallerWindow 确定
|
||
Set up partitions… InstallerWindow 设置分区...
|
||
The partition can't be mounted. Please choose a different partition. InstallProgress 分区无法挂载。请选择其他分区。
|
||
Running Boot Manager…\n\nClose Boot Manager to continue with the installation. InstallerWindow 引导管理器运行中...\n\n请关闭引导管理器以继续安装。
|
||
Install anyway InstallProgress 继续安装
|
||
An error was encountered and the installation was not completed:\n\nError: %s InstallerWindow 发生意外错误，系统安装未完成：\n\nError：%s
|
||
\trootnoverify\t\t(hd0,6)\n InstallerApp \trootnoverify\t\t(hd0,6)\n
|
||
Press the Begin button to install from '%1s' onto '%2s'. InstallerWindow 按下 “开始”，从 '%1s' 安装到 '%2s'。
|
||
Running DriveSetup…\n\nClose DriveSetup to continue with the installation. InstallerWindow 磁盘管理器运行中...\n\n请关闭磁盘管理器以继续安装。
|
||
Have fun and thanks a lot for trying out Haiku! We hope you like it! InstallerApp 非常感谢您能够使用 Haiku！使用愉快，我们希望您能够喜欢它。
|
||
OK InstallProgress 确定
|
||
Please choose target InstallerWindow 请选择目标
|
||
??? InstallerWindow Unknown partition name ???
|
||
1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1）如果您将安装 Haiku 到真实硬件（而不是虚拟机），强烈建议您预备一个硬盘分区。系统安装器和磁盘管理器将初始化已有分区为 Haiku 原生文件系统，但是修改实际分区布局的选项还未在各种配置的计算机上进行大规模的测试，因此我们建议您不要使用它。
|
||
2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2）系统安装器能够实现 Haiku 分区的启动，但是并不能够将 Haiku 集成到已有的引导菜单。如果您安装了 GRUB，您可以添加 Haiku 到其引导菜单。对于不同的 GRUB 版本，所要执行的操作将不尽相同。
|
||
Begin InstallerWindow 开始
|
||
Finally, you have to update the boot menu by entering:\n\n InstallerApp 最后，您需要更新引导菜单，请输入：\n\n
|
||
If you have not created a partition yet, simply reboot, create the partition using whatever tool you feel most comfortable with, and reboot into Haiku to continue with the installation. You could for example use the GParted Live-CD, it can also resize existing partitions to make room.\n\n\n InstallerApp 如果您没有创建分区，仅需要重启，使用您感觉友好的工具创建分区，然后重启进入 Haiku 以继续执行安装。例如，您可以使用 GParted Live-CD，它也可以调整已有分区大小以腾出空间。
|
||
With GRUB 2 the first logical partition always has the number \"5\", regardless of the number of primary partitions.\n\n InstallerApp 对于 GRUB2 ，首个逻辑分区编号总是 \"5\"，它和其他主分区编号没有任何关系。
|
||
Write boot sector InstallerWindow 写入引导扇区
|
||
Cancel InstallerWindow 取消
|
||
DriveSetup, the application to configure disk partitions, could not be launched. InstallerWindow 磁盘管理器可用于配置磁盘分区，当前其无法启动。
|
||
No optional packages available. PackagesView 无可用附加软件包。
|
||
All hard disks start with \"hd\".\n InstallerApp 所有硬盘的起始字符为：\"hd\"。\n
|
||
Continue InstallerApp 继续
|
||
BootManager, the application to configure the Haiku boot menu, could not be launched. InstallerWindow 引导管理器，用于配置 Haiku 引导菜单，无法启动。
|
||
Configure your /boot/grub/menu.lst by launching your favorite editor from a Terminal like this:\n\n InstallerApp 从终端中启动偏好的编辑器，配置您的 /boot/grub/menu.lst，如下：
|
||
Boot sector not written because of an internal error. InstallProgress 由于内部错误，引导扇区未写入。
|
||
Additional disk space required: %s InstallerWindow 需要额外磁盘空间：%s
|
||
NOTE: While the naming strategy for hard disks is still as described under 2.1) the naming scheme for partitions has changed.\n\n InstallerApp 备注：由于硬盘的命名策略仍然如 2.1) 所述，因此分区的方案已经发生了改变。
|
||
Cancel InstallProgress 取消
|
||
Running Boot Manager and DriveSetup…\n\nClose both applications to continue with the installation. InstallerWindow 引导管理器和磁盘管理器运行中...\n请关闭这两个程序以继续安装。
|
||
Try installing anyway InstallProgress 尝试继续安装
|
||
So below the heading that must not be edited, add something similar to these lines:\n\n InstallerApp 所以，在不需要编辑的头部下面，添加类似于以下行的内容：
|
||
Are you sure you want to to stop the installation? InstallerWindow 您是否确定终止安装过程？
|
||
Onto: InstallerWindow 安装到：
|
||
Please close the Boot Manager window before closing the Installer window. InstallerWindow 在关闭系统安装器之前请关闭引导管理器。
|
||
3) When you successfully boot into Haiku for the first time, make sure to read our \"Welcome\" and \"Userguide\" documentation. There are links on the Desktop and in WebPositive's bookmarks.\n\n InstallerApp 3) 在首次成功启动 Haiku 之后，您需要阅读 \"欢迎使用\" 和 \"用户指南\" 等文档。在桌面和 WebPositive 的书签栏内都有它们的链接。\n\n
|
||
Tools InstallerWindow 工具
|
||
The mount point could not be retrieved. InstallProgress 挂载点无法恢复。
|
||
The target volume is not empty. Are you sure you want to install anyway?\n\nNote: The 'system' folder will be a clean copy from the source volume, all other folders will be merged, whereas files and links that exist on both the source and target volume will be overwritten with the source volume version. InstallProgress 目标卷不为空。您确定必须进行安装吗？\n\n注意：从源卷拷贝的 'system' 文件夹为空，所有其他的文件夹将被合并，反之，源卷和目标卷中的所有文件和链接将会被源卷版本所覆盖。
|
||
You can see the correct partition in GParted for example.\n\n\n InstallerApp 例如，您可以在 GParted 中查看正确的分区。\n\n\n
|
||
\ttitle\t\t\t\tHaiku\n InstallerApp \ttitle\t\t\t\tHaiku\n
|
||
\tsudo <your favorite text editor> /etc/grub.d/40_custom\n\n InstallerApp \tsudo <偏好文本编辑器> /etc/grub.d/40_custom\n\n
|