/* Copyright 2007-2009 Haiku, Inc. All rights reserved. Distributed under the terms of the MIT license. Authors: Gerald Zajac 2007-2009 */ #ifndef DRIVERINTERFACE_H #define DRIVERINTERFACE_H #include #include #include #include // This file contains info that is shared between the kernel driver and the // accelerant, and info that is shared among the source files of the accelerant. #define ENABLE_DEBUG_TRACE // if defined, turns on debug output to syslog #define ARRAY_SIZE(a) (int(sizeof(a) / sizeof(a[0]))) // get number of elements in an array struct Benaphore { sem_id sem; int32 count; status_t Init(const char* name) { count = 0; sem = create_sem(0, name); return sem < 0 ? sem : B_OK; } status_t Acquire() { if (atomic_add(&count, 1) > 0) return acquire_sem(sem); return B_OK; } status_t Release() { if (atomic_add(&count, -1) > 1) return release_sem(sem); return B_OK; } void Delete() { delete_sem(sem); } }; enum { ATI_GET_SHARED_DATA = B_DEVICE_OP_CODES_END + 123, ATI_DEVICE_NAME, ATI_GET_EDID, ATI_RUN_INTERRUPTS, ATI_SET_VESA_DISPLAY_MODE }; // Chip type numbers. These are used to group the chips into related // groups. See table chipTable in driver.c // Note that the order of the Mach64 chip types must not be changed because // < or > comparisons of the chip types are made. They should be in the order // of the evolution of the chips. enum ChipType { ATI_NONE = 0, MACH64_264VT, MACH64_264GT, MACH64_264VTB, MACH64_264GTB, MACH64_264VT3, MACH64_264GTDVD, MACH64_264LT, MACH64_264VT4, MACH64_264GT2C, MACH64_264GTPRO, MACH64_264LTPRO, MACH64_264XL, MACH64_MOBILITY, Mach64_ChipsEnd, // marks end of Mach64's RAGE128_GL, RAGE128_MOBILITY, RAGE128_PRO_GL, RAGE128_PRO_VR, RAGE128_PRO_ULTRA, RAGE128_VR, }; #define MACH64_FAMILY(chipType) (chipType < Mach64_ChipsEnd) #define RAGE128_FAMILY(chipType) (chipType > Mach64_ChipsEnd) enum MonitorType { MT_VGA, // monitor with analog VGA interface MT_DVI, // monitor with DVI interface MT_LAPTOP // laptop video display }; // Mach64 parameters for computing register vaules and other parameters. struct M64_Params { // Clock parameters uint8 clockNumberToProgram; // obtained from video BIOS uint32 maxPixelClock; // obtained from video BIOS int refFreq; // obtained from video BIOS int refDivider; // obtained from video BIOS uint8 xClkPostDivider; uint8 xClkRefDivider; uint16 xClkPageFaultDelay; uint16 xClkMaxRASDelay; uint16 displayFIFODepth; uint16 displayLoopLatency; uint8 vClkPostDivider; uint8 vClkFeedbackDivider; }; struct R128_PLLParams { uint16 reference_freq; uint16 reference_div; uint32 min_pll_freq; uint32 max_pll_freq; uint16 xclk; }; struct R128_RAMSpec { // All values in XCLKS int memReadLatency; // Memory Read Latency int memBurstLen; // Memory Burst Length int rasToCasDelay; // RAS to CAS delay int rasPercentage; // RAS percentage int writeRecovery; // Write Recovery int casLatency; // CAS Latency int readToWriteDelay; // Read to Write Delay int loopLatency; // Loop Latency int loopFudgeFactor; // Add to memReadLatency to get loopLatency const char *name; }; struct VesaMode { uint16 mode; // VESA mode number uint16 width; uint16 height; uint8 bitsPerPixel; }; struct DisplayModeEx : display_mode { uint8 bitsPerPixel; uint16 bytesPerRow; // number of bytes in one line/row }; struct SharedInfo { // Device ID info. uint16 vendorID; // PCI vendor ID, from pci_info uint16 deviceID; // PCI device ID, from pci_info uint8 revision; // PCI device revsion, from pci_info ChipType chipType; // indicates group in which chip belongs (a group has similar functionality) char chipName[32]; // user recognizable name of chip bool bAccelerantInUse; // true = accelerant has been initialized bool bInterruptAssigned; // card has a useable interrupt assigned to it sem_id vertBlankSem; // vertical blank semaphore; if < 0, there is no semaphore // Memory mappings. area_id regsArea; // area_id for the memory mapped registers. It will // be cloned into accelerant's address space. area_id videoMemArea; // video memory area_id. The addresses are shared with all teams. void* videoMemAddr; // video memory addr as viewed from virtual memory void* videoMemPCI; // video memory addr as viewed from the PCI bus (for DMA) uint32 videoMemSize; // video memory size in bytes. uint32 cursorOffset; // offset of cursor in video memory uint32 frameBufferOffset; // offset of frame buffer in video memory uint32 maxFrameBufferSize; // max available video memory for frame buffer // Color spaces supported by current video chip/driver. color_space colorSpaces[6]; uint32 colorSpaceCount; // number of color spaces in array colorSpaces // List of screen modes. area_id modeArea; // area containing list of display modes the driver supports uint32 modeCount; // number of display modes in the list DisplayModeEx displayMode; // current display mode configuration // List of VESA modes supported by current chip. uint32 vesaModeTableOffset; // offset of table in shared info uint32 vesaModeCount; uint16 cursorHotX; // Cursor hot spot. Top left corner of the cursor uint16 cursorHotY; // is 0,0 edid1_info edidInfo; bool bHaveEDID; // true = EDID info from device is in edidInfo Benaphore engineLock; // for serializing access to the acceleration engine MonitorType displayType; uint16 panelX; // laptop LCD width uint16 panelY; // laptop LCD height uint16 panelPowerDelay; // Data members for Mach64 chips. //------------------------------- M64_Params m64Params; // parameters for Mach64 chips // Data members for Rage128 chips. //-------------------------------- R128_RAMSpec r128MemSpec; // Rage128 memory timing spec's R128_PLLParams r128PLLParams; // Rage128 PLL parameters from video BIOS ROM uint32 r128_dpGuiMasterCntl; // flags for accelerated drawing }; #endif // DRIVERINTERFACE_H