* Implemented Synaptics touchpad support in the PS2 bus_manager by
refactoring/splitting the structure some and adding touchpad device
handling.
* Implemented Touchpad input_server device add-on
* Created Touchpad preflet for configuring advances Synaptics touchpad
options like scroll region (both horizontal and vertical) as well
as other neat stuff
Thanks a lot, Clemens!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28416 a95241bf-73f2-0310-859d-f6bbb57e9c96
mode informations are available.
* This is passed to the graphics card when the mode is set in the hopes that it
will be more conforming.
* Not yet tested on real hardware, though, therefore the VESA driver doesn't
do anything like this yet. I will test next, but please report any problems
with this nonetheless.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28390 a95241bf-73f2-0310-859d-f6bbb57e9c96
that conveniently bridge BVolumes/mount points with BPartitions.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28346 a95241bf-73f2-0310-859d-f6bbb57e9c96
ide_mask_sector_count_48, and ide_mask_LBA_*_48 were all wrong.
* Using the high byte in LBA48 mode should work now, too (wasn't written
to the IDE controller before, but that shouldn't have been a problem yet with
today's disks).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28340 a95241bf-73f2-0310-859d-f6bbb57e9c96
This is not necessary, since userland teams' page directories also
contain the kernel mappings, and avoids unnecessary TLB flushes. To make
that possible the vm_translation_map_arch_info objects are reference
counted now.
This optimization reduces the kernel time of the Haiku build on my
machine with SMP disabled a few percent, but interestingly the total
time decreases only marginally. Haven't tested with SMP yet, but for
full impact CPU affinity would be needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28287 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added deferred_delete() that takes a DeferredDeletable and deletes it
asynchronously.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28285 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the password window to use this feel.
* Later, the screen saver itself should use this feel whenever the password
mode is enabled. The password window should then use a modal-app feel, but
this doesn't work yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28281 a95241bf-73f2-0310-859d-f6bbb57e9c96
scheduler_set_thread_priority(). Setting the thread priority was the
only situation in which it was used.
* Renamed scheduler.cpp to scheduler_simple.cpp.
* The scheduler functions are no longer called directly. Instead there's
an operation vector now, which is initialized at kernel init time.
This allows for picking the most suitable scheduler for the machine
(e.g. a non-SMP scheduler on a non-SMP machine).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28262 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Turned the checks for all those macros to "#if"s instead of "#ifdef"s.
* Introduced macro KDEBUG_LEVEL which serves as a master setting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28248 a95241bf-73f2-0310-859d-f6bbb57e9c96
added vm_memcpy_from_physical() and vm_memcpy_physical_page(), and
added respective functions to the vm_translation_map operations. The
architecture specific implementation can now decide how to implement
them most efficiently. Added generic implementations that can be used,
though.
* Changed vm_{get,put}_physical_page(). The former no longer accepts
flags (the only flag PHYSICAL_PAGE_DONT_WAIT wasn't needed anymore).
Instead it returns an implementation-specific handle that has to be
passed to the latter. Added vm_{get,put}_physical_page_current_cpu()
and *_debug() variants, that work only for the current CPU,
respectively when in the kernel debugger. Also adjusted the
vm_translation_map operations accordingly.
* Made consequent use of the physical memory operations in the source
tree.
* Also adjusted the m68k and ppc implementations with respect to the
vm_translation_map operation changes, but they are probably broken,
nevertheless.
* For x86 the generic physical page mapper isn't used anymore. It is
suboptimal in any case. For systems with small memory it is too much
overhead, since one can just map the complete physical memory (that's
not done yet, though). For systems with large memory it counteracts
the VM strategy to reuse the least recently used pages. Since those
pages will most likely not be mapped by the page mapper anymore, it
will keep remapping chunks. This was also the reason why building
Haiku in Haiku was significantly faster with only 256 MB RAM (since
that much could be kept mapped all the time).
Now we're using a different strategy: We have small pools of virtual
page slots per CPU that are used for the physical page operations
(memset_physical(), memcpy_*_physical()) with CPU-pinned thread.
Furthermore we have four slots per translation map, which are used to
map page tables.
These changes speed up the Haiku image build in Haiku significantly. On
my Core2 Duo 2.2 GHz 2 GB machine about 40% to 20 min 40 s (KDEBUG
disabled, block cache debug disabled). Still more than factor 3 slower
than FreeBSD and Linux, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28244 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduced flag "invoke_scheduler" in the per CPU structure. It is
evaluated in hardware_interrupt() (x86 only ATM).
* Introduced SMP_MSG_RESCHEDULE_IF_IDLE message, which enters the
scheduler when the CPU currently runs an idle thread.
* Don't do dprintf() "CPU x halted!" when handling a SMP_MSG_CPU_HALT
ICI message. It uses nested spinlocks and could thus potentially
deadlock itself (acquire_spinlock() processes ICI messages, so it
could already hold one of the locks). This is a pretty likely scenario
on machines with more than two CPUs, but is also possible when the
panic()ing thread holds the threads spinlock. Probably fixes#2572.
* Reworked the way the kernel debugger is entered and added a "cpu"
command that allows switching the CPU once in KDL. It is thus possible
to get a stack trace of the thread not on the panic()ing CPU.
* When a thread is added to the run queue, we do now check, if another
CPU is idle and ask it to reschedule, if it is. Before this change, the
CPU was continuing to idle until the quantum of the idle thread
expired. Speeds up the libbe.so build about 8% on my machine (haven't
tested the full Haiku image build yet).
* When spinlock debugging is enabled (DEBUG_SPINLOCKS) we also record
the spinlock acquirer on non-smp machines. Added "spinlock" debugger
command to get the info.
* Added debugger commands "ici" and "ici_message", printing info on
pending ICI message respectively on a given one.
* Process not only a single ICI message in acquire_spinlock() and other
places, but all pending ones.
* Also process ICI messages when waiting for a free one -- avoids a
potential deadlock.
* Mask out non-existing CPUs in send_multicast_ici(). panic() instead of
just returning when there's no target CPU left.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28223 a95241bf-73f2-0310-859d-f6bbb57e9c96
used that handles NULL returns and doesn't expect an exception. This fixes that
certain constructors would still be called even if the allocation failed in low
memory situations.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28208 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a new class BAffineTransform, currently in the BPrivate namespace
and the inofficial "shared kit".
* Extended BPolygon to be transformable by a BAffineTransform.
Thanks a lot!
Minor fixes by myself:
* The class accidentally still derived from agg::trans_affine.
* Added then missing comparator operators.
* Swapped the BPoint* and count arguments of Apply(), since that seems
to be the more common order in the other Be API.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28176 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add possibility to restart a complete pipe through B_KDEBUG_RESTART_PIPE.
* Implement tail in the kernel debugger making use of the former.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28154 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Resolved TODO: The type of the gradient is no longer encoded twice in the
app_server link protocoll.
* Moved instantiation of the BGradient into the LinkReceiver::ReadGradient()
method.
* Check success for (at least) ReadGradient() in ServerWindow.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28150 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed a general problem with respect to overriding of the reserved
virtual function slots: instead of statically invoking the method
that corresponds to the reserved slot on the class that contains the
slot, we now invoke the virtual Perform() method. Perform() then dispatches
the method invocation to the "proper" class, i.e. the highest class in the
hierarchy that actually implements the requested method.
This fixes a crash in apps that use liblayout's MSlider class and
should fix one or other spurious bug with old apps or libraries, too.
* added new header folder 'binary_compatibility' that contains files that
define the method codes and data structures required by Perform()
* looked for and implemented all used reserved virtual slot functions to
invoke Perform() where necessary or to pass on the method call statically
(for slots that were already maintained by Be)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28124 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented BGradient, BGradientLinear, BGradientRadial,
BGradientDiamond, BGradientConic and BGradientRadialFocus
new Interface Kit classes.
* Implemented all the (AGG-based) backend necessary in
the app_server to render gradients (Painter, DrawingEngine)
* app_server/View can convert a BGradient layout to screen
coordinates.
* Added BGradient methods of the Fill* methods in BView.
* Implemented a test app and added it to the image as a
demo.
* Adopted Icon-O-Matic and libs/icon in order to avoid
clashing with the new BGradient class. Re-use some
parts where possible.
Awesome work, Artur! Thanks a lot. Now a more modern
looking GUI has just become much easier to implement! :-)
TODO:
* Remove the need to have gradient type twice in the
app_server protocol.
* Refactor some parts of the patch to remove duplicated
code (Painter, DrawingEngine).
* Adopt the BPicture protocol to know about BGradients.
* Review some parts of the BArchivable implementation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28109 a95241bf-73f2-0310-859d-f6bbb57e9c96
- initialize the time_base_frequency kernel arg (should be done in the bootloader though...). We will use MFP timer to support system_time(). At least try to.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28098 a95241bf-73f2-0310-859d-f6bbb57e9c96
file system can write to files before mounting.
* Set the flag for all file systems that actually can write.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28055 a95241bf-73f2-0310-859d-f6bbb57e9c96
the methods IsFile() and GetFilePath() to BDiskDevice, and
BDiskDeviceRoster::GetFileDeviceForPath().
* Added new syscalls to implement this functionality.
* Added new flag B_DISK_DEVICE_IS_FILE.
* Fixed wrong operator precedence assumption in the BDiskDevice class at
several places.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28052 a95241bf-73f2-0310-859d-f6bbb57e9c96
- remove dead ppc code
- add support for probing hardware registers the way linux does (early, hook with VBR to trap faults)
- detect MFPs this way.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28031 a95241bf-73f2-0310-859d-f6bbb57e9c96
debugger add-on set a demangle hook, all modules under debugger/demangle/ are
now considered demangle modules.
* Added another function to the demangle module interface that gives you access
to the arguments.
* Implemented a demangling module for GCC2.
* The older demangling module is now called "gcc3+", but doesn't support
getting the arguments yet.
* The "call" KDL command is now using demangling to automatically show you
the arguments of a call from a stack crawl.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28018 a95241bf-73f2-0310-859d-f6bbb57e9c96
r27530 - allow faults with ints disabled if there is a handler
r27648 - call the end-of-interrupt thread callback
r27718 - add <asm_defs.h>, not used yet
r27722 - register the commpage as image and symbols (but we don't use it yet)
- remove dupped call to thread_get_current_thread()
- use 16MB iospace for now, 4MB seems too small.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27999 a95241bf-73f2-0310-859d-f6bbb57e9c96
* This makes it possible to select a specific device, even if no interface
has been configured for it yet. To make it work, each interface now has a
private direct route which will be returned if a socket is bound to a device.
* This will be used for example in DHCP to make it work when more than one
adapter is attached.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27983 a95241bf-73f2-0310-859d-f6bbb57e9c96
PHYSICAL_PAGE_{NO,CAN}_WAIT into an actual flag
PHYSICAL_PAGE_DONT_WAIT.
* Pass the flags through to the chunk mapper callback.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27979 a95241bf-73f2-0310-859d-f6bbb57e9c96
datagram to have the SO_BROADCAST flags set (the flag
is only needed for sending a broadcast) - fixes part of
#2065
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27973 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use the new VMCache::Read() flags parameter to directly read into the
physical page in the page fault handler instead of mapping it first.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27966 a95241bf-73f2-0310-859d-f6bbb57e9c96
in struct stat.
* Instead, I followed Marcus' great idea and added a compatibility check in
the runtime loader: now, R5 binaries (also shared libraries) are detected,
and they get special versions for stat(), fstat(), and lstat() that return
the smaller stat struct.
* However, I've disabled (in src/system/libroot/posix/sys/stat.c) using the
larger stat field for now, as this breaks some of our optional packages.
So until we rebuild them all, this shouldn't be enabled.
* This should now also be used for BeOS compatibility in libnetwork.so.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27961 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added some convenient functions, operator etc...
* reused parts of the patch by Stephen Deken, thanks
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27954 a95241bf-73f2-0310-859d-f6bbb57e9c96
* memset() is now available through the commpage.
* CPU modules can provide a model-optimized memset().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27952 a95241bf-73f2-0310-859d-f6bbb57e9c96
arch_vm_aspace_swap().
* The x86 implementation does now maintain a bit mask per
vm_translation_map_arch_info indicating on which CPUs the address
space is active. This allows flush_tmap() to avoid ICI for user
address spaces when the team isn't currently running on any other CPU.
In this context ICI is relatively expensive, particularly since we map
most pages via vm_map_page() and therefore invoke flush_tmap() pretty
much for every single page.
This optimization speeds up a "hello world" compilation about 20% on
my machine (KDEBUG turned off, freshly booted), but interestingly it
has virtually no effect on the "-j2" haiku build time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27912 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added smp_send_multicast_ici(), which sends the message to all CPUs
specified via a mask.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27910 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The hardware cursor is now disabled at 640x480 with a Virge VX (before it
was just invisible).
* EDID info can now be read for all S3 chips.
* For the Savage IX, Savage MX, and SuperSavage chips the display is no
longer expanded to fill a laptop LCD display when the mode resolution is
less than the size of LCD display.
* Savage IX, Savage MX, and SuperSavage chips will now display mode
1400x1050 on a 1400x1050 laptop LCD display. Previously the display was
blank at that resolution.
* Previously about half the Savage chips would not draw properly at
1400x1050. That is, the image was badly skewed and unusable. All of
them now draw properly at 1400x1050.
* Some code was reorganized to remove unnecessary and redundant code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27863 a95241bf-73f2-0310-859d-f6bbb57e9c96
Currently it only contains KDEBUG and the block cache debugging macros.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27816 a95241bf-73f2-0310-859d-f6bbb57e9c96
#2261.
* Made at least BFS report it more or less correctly (the attributes are
ignored, though).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27791 a95241bf-73f2-0310-859d-f6bbb57e9c96
buffer format, the buffer can now also contain other events than just
stack traces. ATM these are only references to the image events
(created/deleted). Therefore we no longer have to flush the profiling
buffer after such an event, since the debugger can exactly match the
samples. Since we couldn't flush when the profiling timer hit while the
thread was in the kernel, that wasn't working that well anyway.
"profile -f" fails to translate stack trace addresses only very rarely,
now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27775 a95241bf-73f2-0310-859d-f6bbb57e9c96
letting the boot loader provide full paths for the pre-loaded images.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27753 a95241bf-73f2-0310-859d-f6bbb57e9c96
been mounted, before anyone could try to load any modules from it.
Also pass it a flag whether the boot volume is where the boot loader
pre-loaded the modules from.
* module_init_post_boot_device() changes the pre-loaded module image
paths to normalized boot volume paths, now. Got rid of the code in
register_preloaded_module_image() which tried something like this.
* Changed module image ref counting. A referenced module has single
reference to its image, which is released when the module becomes
unreferenced.
* get_module() for a reference module will not try to re-get and re-set
the module's image anymore. That could lead to a similar module (from
different paths) being loaded at the same time. A module from a new
file can only be loaded when the old one has been put completely.
* Simplified B_KEEP_ALIVE module handling a bit. When the module is
initialized, we add another reference, which we'll never free. Thus
the module remains loaded without special handling. Removed
module_image::keep_loaded. A B_KEEP_ALIVE module remains referenced
and thus its image remains referenced, too.
* Removed module::file, a cached path to the module's image. An
optimization that wouldn't work with multiple root directories for
modules (/boot/beos/..., /boot/common/...) or when module files were
moved. get_module() does now always search the image file, when the
module is still unreferenced. This should be a bit slower than before,
but I didn't notice any difference in VMware at least. If it turns out
to be a problem we could introduce a more intelligent cache that stays
up to date by using node monitoring.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27752 a95241bf-73f2-0310-859d-f6bbb57e9c96
function (normalize_path()), now. There was some code duplication
before.
* Added "bool traverseLink" parameter to vfs_normalize_path(). When
true and the leaf component is a symlink, it will be resolved.
* KPath:
- Added similar leaf link traversal parameter to SetTo() and
SetPath().
- Added Normalize().
- Added DetachBuffer(), which returns the object's current buffer and
unsets itself.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27751 a95241bf-73f2-0310-859d-f6bbb57e9c96
elf_add_memory_image_symbol(). The former creates and registers a new
image that has not been loaded from a file. The latter adds a symbol to
its symbol table. This is mainly a debug feature, allowing to name code
or data in memory regions that aren't associated with loaded ELF
objects.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27721 a95241bf-73f2-0310-859d-f6bbb57e9c96
I'm not happy with the location, but I didn't see any better one in the
header tree.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27717 a95241bf-73f2-0310-859d-f6bbb57e9c96
been called for a team, and fail installing the default debugger if it
is set. This makes disable_debugger() actually work. Fixes bug #2763.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27713 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Extended the profiling API by an option to record a variable number of
samples per tick. The stack depth is used as a maximum.
* Added new option "-f" to the "profile" tool. When specified it
increments the hit counts of all symbols in the full available caller
stack. I.e. the resulting hit counts will approximate the total time
spent in each function or any function directly or indirectly called
by it. Thus "_start" and "main" will usually get 100% and leaf
functions only what time has actually been spent in them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27699 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Relaxed the stack depth and profiling interval limits a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27697 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reduced the kernel_args array size from 32 to 16 (7 are used on a normal
build).
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27690 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed hash_remove_current(): It didn't update "lastElement" and thus
always also removed all elements in the same bucket preceding the one
to be removed. Also got rid of the useless "for" loop.
Fixes#2757.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27689 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Adjusted used files systems accordingly.
* BFS::Stream::GetName() was broken. It accessed the small data region
which wasn't loaded, since BFS::Stream derived from bfs_inode, which
is a variably-sized structure with the small data region at the end.
Changed that to a ref-counted, shared member instead.
* Implemented RootFileSystem::GetName().
* Added Directory::GetPath() to get a full path of the directory or an
entry.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27664 a95241bf-73f2-0310-859d-f6bbb57e9c96
buffer during a timer event that interrupted a kernel function: We do
now flush the buffer as soon as it is 70% full, *if* we didn't interrupt
a kernel function. When the buffer runs full and we still haven't hit a
user function, we drop the tick. The number of dropped ticks is recorded
and sent to the debugger with the next update message.
Reverted the previous partial solution (the temporary disabling of
profiling while in debugger support code).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27658 a95241bf-73f2-0310-859d-f6bbb57e9c96
is created or deleted (or exec*() has been invoked). The counter is
sent with several debugger messages.
* Track the image event counter that is used when samples are added to
the profiling buffer. If the current team counter differs, we flush
the buffer first (sending an update message to the debugger), so that
the debugger has a chance to match the addresses to the correct images.
* Disable profiling for a thread while it runs in the debugger support
code. This fixes potential deadlocks which could occur when a
profiling timer event occurred that would require the buffer to be
flushed while the thread was just sending something to the debugger or
waiting for a command. As it turns out, this is not sufficient either,
since we should never try to flush the buffer when the timer event
occurred in the kernel, since the thread might hold a lock that the
debugger thread could try to acquire. Will implement a more general
solution later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27656 a95241bf-73f2-0310-859d-f6bbb57e9c96
BTextView classes:
* Declared the directly used BTextView helper classes as private BTextView
classes and changed all affected files.
* Realized that Tracker's BPoseView was (accidentally?) using what used to
be _BWidthBuffer_. It had declared it's own class with the same name and
same members/size in headers/private/tracker/TextViewSupport.h, but the
implementation was nowhere to be found. I can only explain this that
the BTextView implementation was then actually linked and used. But the big
problem was that it was used without locking (unlike in BTextView)! When
many Tracker windows opened during system startup or later and they happened
to each request characters not yet in the cache, I imagine things could have
gone bad and corrupted memory. Anyways, since I can see the usefulness of
the cache, BPoseView uses BTextView::WidthBuffer on purpose now. And I moved
the locking inside BTextView::WidthBuffer::StringWidth().
* Adjusted InterfaceDefs.cpp accordingly.
* TODO: Move subsequent classes into BTextView namespace as well, ie derived
classes that BTextView doesn't directly know about. All stuff in src/kits/
inteface/textview_support/
* Added preliminary and not yet implemented layout friendly BTextView
constructors.
* I will try to handle the insets imposed by BTextView::fTextRect a bit
differently when used inside the new layout management framework. For this,
I added BTextView::SetInsets() and GetInsets(). SetInsets() doesn't do
anything yet.
So far, everything seems to work still... ;-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27654 a95241bf-73f2-0310-859d-f6bbb57e9c96
* We can't enable interrupts in an interrupt handler. Instead we use the
newly introduced callback feature, which notifies the debugger right
before returning from the interrupt.
* We didn't indicate that the profiling buffer was full and that the
thread shouldn't be profiled ATM. Therefore it could happen that it
was profiled while trying to notify the debugger that the profiling
buffer was full, resulting in a deadlock. Introduce a respective flag
in the thread debug structure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27649 a95241bf-73f2-0310-859d-f6bbb57e9c96
interrupt handler and will be executed right before returning from the
interrupt.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27648 a95241bf-73f2-0310-859d-f6bbb57e9c96
be tracked to the kernel, which then counts the hits, an area is
passed to kernel in which the hits are recorded. When the area is
full, the debugger is notified. For some reason that part doesn't work
yet -- the whole system freezes when waiting for a reply.
* Reorganized the profile tool code a bit. For one with respect to the
changed API, but also to prepare tracking of image creation/deletion.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27640 a95241bf-73f2-0310-859d-f6bbb57e9c96
* wait_for_timer() now detects if it has been called from within the timer
execution thread, and will return in error instead of waiting for itself
forever. This fixes bug #2682.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27620 a95241bf-73f2-0310-859d-f6bbb57e9c96
various system information.
* Implemented retrieving some VM stats via this call.
* The VM now maintains a page fault counter, and sets system_info::page_faults
accordingly.
* Added a (pretty simple) "vmstat" command line app.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27597 a95241bf-73f2-0310-859d-f6bbb57e9c96
VMware this doesn't produce very good results though. In my tests I only
got twice as many hits as with 1 ms, although it should be roughly ten
times as many. Might work better on real hardware.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27572 a95241bf-73f2-0310-859d-f6bbb57e9c96
still pretty much work in progress.
* Introduced init_thread_debug_info() which is used instead of
clear_thread_debug_info() when the thread is created. The latter
requires former initialization.
* user_debug_thread_deleted() is now already invoked in thread_exit(),
not in the undertaker.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27531 a95241bf-73f2-0310-859d-f6bbb57e9c96
many iframes are supposed to be skipped before recording the stack
trace. Currently implemented for x86 only.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27529 a95241bf-73f2-0310-859d-f6bbb57e9c96
When specified, the message is read but not removed from the port.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27527 a95241bf-73f2-0310-859d-f6bbb57e9c96
be used now. Tested only with VMware so far.
* apm_shutdown() is now called with interrupts turned on.
* Renamed arch_cpu.c to arch_cpu.cpp.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27404 a95241bf-73f2-0310-859d-f6bbb57e9c96
