arch_debug_registers instead.
* Call arch_debug_save_registers() on all CPUs when entering the kernel
debugger.
* Added debug_get_debug_registers() to return a specified CPU's saved
registers.
* x86:
- Replaced the previous arch_debug_save_registers() implementation. Disabled
getting the registers via the gdb interface for the time being.
- Fixed the "sc", "call", and "calling" commands to also work for threads
running on another CPU.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35907 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the page table allocation more flexible. Got rid of sMaxVirtualAddress
and added new virtual_end address to the architecture specific kernel args.
* Increased the virtual space we reserve for the kernel to 16 MB. That
should suffice for quite a while. The previous 2 MB were too tight when
building the kernel with debug info.
* mmu_init(): The way we were translating the BIOS' extended memory map to
our physical ranges arrays was broken. Small gaps between usable memory
ranges would be ignored and instead marked allocated. This worked fine for
the boot loader and during the early kernel initialization, but after the
VM has been fully set up it frees all physical ranges that have not been
claimed otherwise. So those ranges could be entered into the free pages
list and would be used later. This could possibly cause all kinds of weird
problems, probably including ACPI issues. Now we add only the actually
usable ranges to our list.
Kernel:
* vm_page_init(): The pages of the ranges between the usable physical memory
ranges are now marked PAGE_STATE_UNUSED, the allocated ranges
PAGE_STATE_WIRED.
* unmap_and_free_physical_pages(): Don't free pages marked as unused.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35726 a95241bf-73f2-0310-859d-f6bbb57e9c96
needs to be or'ed to the address specification), "uncached" is assumed.
* Set the memory type for the "BIOS" and "DMA" areas to write-back. Not sure, if
that's correct, but that's what was effectively used on my machines before.
* Changed x86_set_mtrrs() and the CPU module hook to also set the default memory
type.
* Rewrote the MTRR computation once more:
- Now we know all used memory ranges, so we are free to extend used ranges
into unused ones in order to simplify them for MTRR setup.
- Leverage the subtractive properties of uncached and write-through ranges to
simplify ranges of any other respectively write-back type.
- Set the default memory type to write-back, so we don't need MTRRs for the
RAM ranges.
- If a new range intersects with an existing one, we no longer just fail.
Instead we use the strictest requirements implied by the ranges. This fixes
#5383.
Overall the new algorithm should be sufficient with far less MTRRs than before
(on my desktop machine 4 are used at maximum, while 8 didn't quite suffice
before). A drawback of the current implementation is that it doesn't deal with
the case of running out of MTRRs at all, which might result in some ranges
having weaker caching/memory ordering properties than requested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35515 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Pulled the physical page mapping functions out of vm_translation_map into
a new interface VMPhysicalPageMapper.
* Renamed vm_translation_map to VMTranslationMap and made it a proper C++
class. The functions in the operations vector have become methods.
* Added class GenericVMPhysicalPageMapper implementing VMPhysicalPageMapper
as far as possible (without actually writing new code).
* Adjusted the x86 and the PPC specifics accordingly (untested for the
latter). For the other architectures the build is, I'm afraid, seriously
broken.
The next steps will modify and extend the VMTranslationMap interface, so that
it will be possible to fix the bugs in vm_unmap_page[s]() and employ
architecture specific optimizations.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35066 a95241bf-73f2-0310-859d-f6bbb57e9c96
system_time_nsecs(), returning the system time in nanoseconds. The function
is only really implemented for x86. For the other architectures
system_time() * 1000 is returned.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34543 a95241bf-73f2-0310-859d-f6bbb57e9c96
all MTRRs at once.
* Added a respective x86_set_mtrrs() kernel function.
* x86 CPU module:
- Implemented the new hook.
- Prefixed most debug output with the CPU index. Otherwise it gets quite
confusing with multiple CPUs.
- generic_init_mtrrs(): No longer clear all MTRRs, if they are already
enabled. This lets us benefit from the BIOS's setup until we install our
own -- otherwise with caching disabled things are *really* slow.
* arch_vm.cpp: Completely rewrote the MTRR handling as the old one was not
only slow (O(2^n)), but also broken (resulting in incorrect setups (e.g.
with cachable ranges larger than requested)), and not working by design for
certain cases (subtractive setups intersecting ranges added later).
Now we maintain an array with the successfully set ranges. When a new range
is added, we recompute the complete MTRR setup as we need to. The new
algorithm analyzing the ranges has linear complexity and also handles range
base addresses with an alignment not matching the range size (e.g. a range
at address 0x1000 with size 0x2000) and joining of adjacent/overlapping
ranges of the same type.
This fixes the slow graphics on my 4 GB machine (though unfortunately the
8 MTRRs aren't enough to fully cover the complete frame buffer (about 35
pixel lines remain uncachable), but that can't be helped without rounding up
the frame buffer size, for which we don't have enough information). It might
also fix#1823.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34197 a95241bf-73f2-0310-859d-f6bbb57e9c96
aren't routed correctly over the 8259, it seems.
- Removed passing the hpet_regs around, since there's a static variable.
- Added lots of debug dprintfs.
- Fixed setting the timer interrupt to edge
- Timer is initialized once.
- Use the timer 0 instead of 2.
- Renamed register definitions to be more readable
- Use 64 bits registers and unions where applicable.
- Other things I don't remember
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33345 a95241bf-73f2-0310-859d-f6bbb57e9c96
Also shortened some defines using "TN" instead of "TIMER". It's also
the same scheme used in the specs
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33334 a95241bf-73f2-0310-859d-f6bbb57e9c96
ROUNDUP to use '*' and '/' -- the compiler will optimize that for powers of
two anyway and this implementation works for other numbers as well.
* The thread::fault_handler use in C[++] code was broken with gcc 4. At least
when other functions were invoked. Trying to trick the compiler wasn't a
particularly good idea anyway, since the next compiler version could break
the trick again. So the general policy is to use the fault handlers only in
assembly code where we have full control. Changed that for x86 (save for the
vm86 mode, which has a similar mechanism), but not for the other
architectures.
* Introduced fault_handler, fault_handler_stack_pointer, and fault_jump_buffer
fields in the cpu_ent structure, which must be used instead of
thread::fault_handler in the kernel debugger. Consequently user_memcpy() must
not be used in the kernel debugger either. Introduced a debug_memcpy()
instead.
* Introduced debug_call_with_fault_handler() function which calls a function
in a setjmp() and fault handler context. The architecture specific backend
arch_debug_call_with_fault_handler() has only been implemented for x86 yet.
* Introduced debug_is_kernel_memory_accessible() for use in the kernel
debugger. It determines whether a range of memory can be accessed in the
way specified. The architecture specific back end
arch_vm_translation_map_is_kernel_page_accessible() has only been implemented
for x86 yet.
* Added arch_debug_unset_current_thread() (only implemented for x86) to unset
the current thread pointer in the kernel debugger. When entering the kernel
debugger we do some basic sanity checks of the currently set thread structure
and unset it, if they fail. This allows certain commands (most importantly
the stack trace command) to avoid accessing the thread structure.
* x86: When handling a double fault, we do now install a special handler for
page faults. This allows us to gracefully catch faulting commands, even if
e.g. the thread structure is toast.
We are now in much better shape to deal with double faults. Hopefully avoiding
the triple faults that some people have been experiencing on their hardware
and ideally even allowing to use the kernel debugger normally.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32073 a95241bf-73f2-0310-859d-f6bbb57e9c96
* SMP:
- Added smp_send_broadcast_ici_interrupts_disabled(), which is basically
equivalent to smp_send_broadcast_ici(), but is only called with interrupts
disabled and gets the CPU index, so it doesn't have to use
smp_get_current_cpu() (which dereferences the current thread).
- Added cpu index parameter to smp_intercpu_int_handler().
* x86:
- arch_int.c -> arch_int.cpp
- Set up an IDT per CPU. We were using a single IDT for all CPUs, but that
can't work, since we need different tasks for the double fault interrupt
vector.
- Set the per CPU double fault task gates correctly.
- Renamed set_intr_gate() to set_interrupt_gate and set_system_gate() to
set_trap_gate() and documented them a bit.
- Renamed double_fault_exception() x86_double_fault_exception() and fixed
it not to use smp_get_current_cpu(). Instead we have the new
x86_double_fault_get_cpu() that deducts the CPU index from the used stack.
- Fixed the double_fault interrupt handler: It no longer calls int_bottom to
avoid accessing the current thread.
* debug.cpp:
- Introduced explicit debug_double_fault() to enter the kernel debugger from
a double fault handler.
- Avoid using smp_get_current_cpu().
- Don't use kprintf() before sDebuggerOnCPU is set. Otherwise
acquire_spinlock() is invoked by arch_debug_serial_puts().
Things look a bit better when the current thread pointer is broken -- we run
into kernel_debugger_loop() and successfully print the "Welcome to KDL"
message -- but we still dereference the thread pointer afterwards, so that we
don't get a usable kernel debugger yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32050 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added x86_double_fault_get_cpu(), a save way to get the CPU index when in
the double fault handler. smp_get_current_cpu() requires at least a somewhat
intact thread structure, so we rather want to avoid it when handling a double
fault. There are a lot more of those dependencies in the KDL entry code.
Working on it...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32028 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The bulk of the work -- i.e. juggling the software and hardware breakpoints,
watchpoints, and memory reads/writes -- is done in the new class
BreakpointManager.
* For the architectures a few capability macros have to be defined, one
pointing to the software breakpoint instruction opcode. Done for x86.
* Some more simplifications in the user debugger code, made possible by the
recently introduced debugger_changed_condition attribute.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31214 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Generalized address checks. The debugger can now also read the commpage.
* Added new syscall _kern_get_thread_cpu_state() to get the CPU state of a
not running thread. Introduced arch_get_thread_debug_cpu_state() for that
purpose, which is only implemented for x86 ATM (uses the new
i386_get_thread_user_iframe()).
* Don't allow a debugger to change a thread's "esp" anymore. That's the esp
register in the kernel. "user_esp" can still be changed.
* Generally set RF (resume flag) in eflags in interrupt handlers, not only
after a instruction breakpoint debug exception. This should prevent
breakpoints from being triggered more than once (e.g. when the breakpoint is
on an instruction that can cause a page fault). I still saw those with bdb
in VMware, but that might be a VMware bug.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31045 a95241bf-73f2-0310-859d-f6bbb57e9c96
gcc could apparently assume that the register assigned to the one in the
clobber list would keep its value (as can be observed when disassembling
add_debugger_command_etc()).
Using a dummy output register works around the problem and also avoids the
unnecessary initialization of the register.
Comments explaining the mystery welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30909 a95241bf-73f2-0310-859d-f6bbb57e9c96
will return consistent values. This helps with debug measurements for the time
being. Obviously we'll have to think of something different when we support
speed-stepping on models with frequency-dependent TSCs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30287 a95241bf-73f2-0310-859d-f6bbb57e9c96
This is not necessary, since userland teams' page directories also
contain the kernel mappings, and avoids unnecessary TLB flushes. To make
that possible the vm_translation_map_arch_info objects are reference
counted now.
This optimization reduces the kernel time of the Haiku build on my
machine with SMP disabled a few percent, but interestingly the total
time decreases only marginally. Haven't tested with SMP yet, but for
full impact CPU affinity would be needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28287 a95241bf-73f2-0310-859d-f6bbb57e9c96
added vm_memcpy_from_physical() and vm_memcpy_physical_page(), and
added respective functions to the vm_translation_map operations. The
architecture specific implementation can now decide how to implement
them most efficiently. Added generic implementations that can be used,
though.
* Changed vm_{get,put}_physical_page(). The former no longer accepts
flags (the only flag PHYSICAL_PAGE_DONT_WAIT wasn't needed anymore).
Instead it returns an implementation-specific handle that has to be
passed to the latter. Added vm_{get,put}_physical_page_current_cpu()
and *_debug() variants, that work only for the current CPU,
respectively when in the kernel debugger. Also adjusted the
vm_translation_map operations accordingly.
* Made consequent use of the physical memory operations in the source
tree.
* Also adjusted the m68k and ppc implementations with respect to the
vm_translation_map operation changes, but they are probably broken,
nevertheless.
* For x86 the generic physical page mapper isn't used anymore. It is
suboptimal in any case. For systems with small memory it is too much
overhead, since one can just map the complete physical memory (that's
not done yet, though). For systems with large memory it counteracts
the VM strategy to reuse the least recently used pages. Since those
pages will most likely not be mapped by the page mapper anymore, it
will keep remapping chunks. This was also the reason why building
Haiku in Haiku was significantly faster with only 256 MB RAM (since
that much could be kept mapped all the time).
Now we're using a different strategy: We have small pools of virtual
page slots per CPU that are used for the physical page operations
(memset_physical(), memcpy_*_physical()) with CPU-pinned thread.
Furthermore we have four slots per translation map, which are used to
map page tables.
These changes speed up the Haiku image build in Haiku significantly. On
my Core2 Duo 2.2 GHz 2 GB machine about 40% to 20 min 40 s (KDEBUG
disabled, block cache debug disabled). Still more than factor 3 slower
than FreeBSD and Linux, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28244 a95241bf-73f2-0310-859d-f6bbb57e9c96
* memset() is now available through the commpage.
* CPU modules can provide a model-optimized memset().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27952 a95241bf-73f2-0310-859d-f6bbb57e9c96
arch_vm_aspace_swap().
* The x86 implementation does now maintain a bit mask per
vm_translation_map_arch_info indicating on which CPUs the address
space is active. This allows flush_tmap() to avoid ICI for user
address spaces when the team isn't currently running on any other CPU.
In this context ICI is relatively expensive, particularly since we map
most pages via vm_map_page() and therefore invoke flush_tmap() pretty
much for every single page.
This optimization speeds up a "hello world" compilation about 20% on
my machine (KDEBUG turned off, freshly booted), but interestingly it
has virtually no effect on the "-j2" haiku build time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27912 a95241bf-73f2-0310-859d-f6bbb57e9c96
be used now. Tested only with VMware so far.
* apm_shutdown() is now called with interrupts turned on.
* Renamed arch_cpu.c to arch_cpu.cpp.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27404 a95241bf-73f2-0310-859d-f6bbb57e9c96
and size of the double fault stack.
* is_kernel_stack_address() does now also check whether the given
address is on the double fault stack. This fixes stack traces on
double faults, which were broken (i.e. went only to the double fault
iframe) since we started checking whether the addresses are on the
kernel stack at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26775 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Dumping the features as string is now a one time thing, that only happens
when DUMP_FEATURE_STRING is defined to 1.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26733 a95241bf-73f2-0310-859d-f6bbb57e9c96
bootloader's smp init and into its own unit.
ACPI tables can now generally be found with acpi_find_table(signature).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26538 a95241bf-73f2-0310-859d-f6bbb57e9c96
automatically selected at boot time. Pit and Apic timers are implemented
for now. Thanks Dustin!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26265 a95241bf-73f2-0310-859d-f6bbb57e9c96
file for hpet implementation. Not yet added to the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25773 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use vm86 mode to call the VESA BIOS to do the actual mode switching by
providing an ioctl in the vesa driver.
* Fix vm86.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25680 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The new function vm86_do_int(struct vm86_state *state, uint8 vec) provides a
facility to call BIOS interupt handlers. The function must only be called from
a user thread context because the lower 1MB of the address space is used.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25610 a95241bf-73f2-0310-859d-f6bbb57e9c96
* In vm86 mode CS will have arbitrary values so we check for both USER_CODE_SEG
and the VM flag in EFLAGS. This is also done when entering interrupt gates.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25607 a95241bf-73f2-0310-859d-f6bbb57e9c96
to contain headers shared by kernel and userland (mainly libroot).
* Moved quite a few private kernel headers to the new location. Split
several kernel headers into a shared part and one that is still kernel
private. Adjusted all affected Jamfiles and source in the standard x86
build accordingly. The build for other architectures and for test code
may be broken.
* Quite a bit of userland code still includes private kernel headers.
Mostly those are <util/*> headers. The ones that aren't strictly
kernel-only should be moved to some other place (maybe
headers/private/shared/util).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25486 a95241bf-73f2-0310-859d-f6bbb57e9c96
address space that is fully locked and marked B_KERNEL_AREA. It can
thus be accessed by the kernel without additional checks.
* For each userland thread we do create a user_thread structure in that
area. The structure is accessible from userland via TLS, using the
private get_user_thread() function.
* Introduced private userland functions [un]defer_signals(). They can be
used to cheaply disable/re-enable signal delivery. They use the
user_thread::defer_signals/pending_signals fields which are
checked/updated by the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25451 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Allow userland teams to create areas below 1 MB when requested specifically.
* Note, this is a temporary solution - see the comments in the code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25358 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Take extended family and model into account when generating the cpu
type and revision.
- Added Intel Core 2 Extreme to the cpu list.
Please review.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24509 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented automatic syscall restarts:
- A syscall can indicate that it has been interrupted and can be
restarted by setting a respective bit in thread::flags. It can
store parameters it wants to be preserved for the restart in
thread::syscall_restart::parameters. Another thread::flags bit
indicates whether it has been restarted.
- handle_signals() clears the restart flag, if the handled signal
has a handler function installed and SA_RESTART is not set. Another
thread flag (THREAD_FLAGS_DONT_RESTART_SYSCALL) can prevent syscalls
from being restarted, even if they could be (not used yet, but we
might want to use it in resume_thread(), so that we stay
behaviorally compatible with BeOS).
- The architecture specific syscall handler restarts the syscall, if
the restart flag is set. Implemented for x86 only.
- Added some support functions in the private <syscall_restart.h> to
simplify the syscall restart code in the syscalls.
- Adjusted all syscalls that can potentially be restarted accordingly.
- _user_ioctl() sets new thread flag THREAD_FLAGS_IOCTL_SYSCALL while
calling the underlying FS's/driver's hook, so that syscall restarts
can also be supported there.
* thread_at_kernel_exit() invokes handle_signals() in a loop now, as
long as the latter indicates that the thread shall be suspended, so
that after waking up signals received in the meantime will be handled
before the thread returns to userland. Adjusted handle_signals()
accordingly -- when encountering a suspending signal we don't check
for further signals.
* Fixed sigsuspend(): Suspending the thread and rescheduling doesn't
result in the correct behavior. Instead we employ a temporary
condition variable and interruptably wait on it. The POSIX test
suite test passes, now.
* Made the switch_sem[_etc]() behavior on interruption consistent.
Depending on when the signal arrived (before the call or when already
waiting) the first semaphore would or wouldn't be released. Now we
consistently release it.
* Refactored _user_{read,write}[v]() syscalls. Use a common function for
either pair. The iovec version doesn't fail anymore, if anything could
be read/written at all. It also checks whether a complete vector
could be read/written, so that we won't skip data, if the underlying
FS/driver couldn't read/write more ATM.
* Some refactoring in the x86 syscall handler: The int 99 and sysenter
handlers use a common subroutine to avoid code duplication.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23983 a95241bf-73f2-0310-859d-f6bbb57e9c96
23139 into trunk, with roughly the following changes (for details svn
log the branch):
* The int 99 syscall handler is now fully in assembly.
* Added a sysenter/sysexit handler and use it on Pentiums that support
it (via commpage).
* Got rid of i386_handle_trap(). A bit of functionality was moved into
the assembly handler which now uses a jump table to call C functions
handling the respective interrupt.
* Some optimizations to get user debugger support code out of the
interrupt handling path.
* Introduced a thread::flags fields which allows to skip handling of
rare events (signals, user debug enabling/disabling) on the
common interrupt handling path.
* Got rid of the explicit iframe stack. The iframes can still be
retrieved by iterating through the stack frames.
* Made the commpage an architecture independent feature. It's used for
the real time data stuff (instead of creating a separate area).
* The x86 CPU modules can now provide processor optimized versions for
common functions (currently memcpy() only). They are used in the
kernel and are provided to the userland via commpage entries.
* Introduced build system feature allowing easy use of C structure
member offsets in assembly code.
Changes after merging:
* Fixed merge conflict in src/system/kernel/arch/x86/arch_debug.cpp
(caused by refactoring and introduction of "call" debugger command).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23370 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ACPI is evaluated first as it also handles things like multi core or hyper threading setups
* Removed other (disabled) hyper threading code per the notes in the corresponding ToDo
* Limit the detected CPU count to 2 for now as I wasn't able to get it working in either emulation nor real hardware with more than 2 CPUs
* Added a reserved byte to the mp_config_table struct, it worked only by luck as the compiler did padding there to get to the same size
I can now boot my Core 2 Quad with two out of four processors active :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23100 a95241bf-73f2-0310-859d-f6bbb57e9c96
to the private VM types are including vm_types.h now.
* Removed vm_page, vm_area, vm_cache, and vm_address_space typedefs; it's
cleaner this way, and the actual types are only used in C++ files now,
anyway.
* And that caused changes in many files...
* Made commpage.h self-containing.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22329 a95241bf-73f2-0310-859d-f6bbb57e9c96
* PowerStatus is now using this API when compiled for Haiku.
* Note, I'm not sure why yet, but running PowerStatus in the background
crashes at least my laptop after some time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21154 a95241bf-73f2-0310-859d-f6bbb57e9c96
The first use is to let the kernel decide what the preferred syscall mechanism is at boot time and copy the
appropriate user space code there. Can be used for routines the kernel can decide best how to use (memcpy, some
timing routines, etc).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20161 a95241bf-73f2-0310-859d-f6bbb57e9c96
Now two complete tss structures exist within the per-cpu structure. Instead
of having to create a seperate area per each one, initialize them in place.
Also, the old mechanism to getting all of the cpus to get initialized was
subtly broken, but still managed to work. Now, just force all the cpus to
initialize at boot, which makes the actual swapping of esp0 somewhat simpler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20131 a95241bf-73f2-0310-859d-f6bbb57e9c96
at boot, per cpu, detect the cpu, pull down all the relevant cpuid bits and
save them into the per-cpu structure. Changed most of the code scattered here
and there that reads the cpuid to use a new api, x86_check_feature, which looks
at the saved bits.
Also changed the system_info stuff to read from these bits.
While i was at it, refreshed all the bits to be current.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20072 a95241bf-73f2-0310-859d-f6bbb57e9c96
some Pentium 200 MMX pretend to support MTRRs.
This should fix bug #553.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19899 a95241bf-73f2-0310-859d-f6bbb57e9c96
the userland stack in an unsafe way - moved that stuff to arch_thread_enter_userspace(), too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19778 a95241bf-73f2-0310-859d-f6bbb57e9c96
turned off - accessing userland memory. Now, arch_thread_enter_userspace() does that
job, and as a result, may also fail.
* dump_thread() now directly prints the info of the current thread when used without
argument (rather than iterating the thread list to look for the current thread).
* If arch_thread_init_tls() fails upon thread creation, the function will now return
an error.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19775 a95241bf-73f2-0310-859d-f6bbb57e9c96
We don't do anything with it yet, though, so the BIOS will probably ignore us since
we are supposed to poll for events.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15900 a95241bf-73f2-0310-859d-f6bbb57e9c96
substructure now (that's the only member actually). The system time
offset is therefore accessed via architecture specific accessor
functions.
Note, that this commit breaks the PPC build. Since I want to rename at
least one file I've already changed, I can't avoid that.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15835 a95241bf-73f2-0310-859d-f6bbb57e9c96
this saves 4 bytes per page. To compensate the loss of bytes, the offset is now
stored in page size units, that's enough to address 2^44 or 16 TB (which is now
the maximal supported file size!).
* Renamed vm_page::ppn to physical_page_number.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15637 a95241bf-73f2-0310-859d-f6bbb57e9c96
arch/*/thread_struct.h to arch_thread_types.h, so that it can directly
be included without having to specify the architecure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15616 a95241bf-73f2-0310-859d-f6bbb57e9c96
kernel TLBs from being flushed on context switch.
* new arch_cpu_user_TLB_invalidate() that now does what arch_cpu_global_TLB_invalidate()
did before.
* arch_cpu_global_TLB_invalidate() will now flush all TLBs, even those from the
kernel.
* some cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15535 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The boot loader now checks the CPU for the cpuid and rdtsc features, which we
currently both rely on.
* Removed old and no longer used stage2_priv.h header
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15534 a95241bf-73f2-0310-859d-f6bbb57e9c96
has not yet been tested, though - I'll do this after this commit):
* Removed the arch_memory_type stuff from vm_area; since there are only 8 memory
ranges on x86, it's simply overkill. The MTRR code now remembers the area ID
and finds the MTRR that way (it could also iterate over the existing MTRRs).
* Introduced some post_modules() init functions.
* If the other x86 CPUs out there don't differ a lot, MTRR functionality might
be put back into the kernel.
* x86_write_msr() was broken, it wrote the 64 bit number with the 32 bit words
switched - it took me some time (and lots of #GPs) to figure that one out.
* Removed the macro read_ebp() and introduced a function x86_read_ebp()
(it's not really a time critical call).
* Followed the Intel docs on how to change MTRRs (symmetrically on all CPUs
with caches turned off).
* Asking for memory types will automatically change the requested length to
a power of two - note that BeOS seems to behave in the same, although that's
not really very clean.
* fixed MTRRs are ignored for now - we should make sure at least, though,
that they are identical on all CPUs (or turn them off, even though I'd
prefer the BIOS stuff to be uncacheable, which we don't enforce yet, though).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15528 a95241bf-73f2-0310-859d-f6bbb57e9c96
to be able to follow the stack trace into userland.
No symbols there, yet, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14697 a95241bf-73f2-0310-859d-f6bbb57e9c96
* there is now a "Disable Hyper-Threading" safemode in the boot loader
* the SMP & HT menu items are now added in smp.cpp - and are only added
if the system supports one of them.
* more cleanup to smp_apic.h
* removed cpuid() from the boot loader's support.S - instead, it will now
use the one from the kernel.
* added a very weak HT detection: if the MP config only listed one CPU,
and this CPU supports HT, we enable the other logic processor manually -
as this currently doesn't work, it's disabled, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14536 a95241bf-73f2-0310-859d-f6bbb57e9c96
part of the base table, not the extended table.
Renamed some structure fields, variables to be clearer and nicer to read.
Removed some unused stuff.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14502 a95241bf-73f2-0310-859d-f6bbb57e9c96
your system, I've also added a "Disable SMP" safemode option. The NO_SMP
define is still there, and will be removed once SMP works flawlessly.
Prints out infos about the interrupt entries in the MP config.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14499 a95241bf-73f2-0310-859d-f6bbb57e9c96
user application performs a division by zero or causes a general
protection fault. For some exceptions (e.g. machine check) I wasn't
quite sure whether they can be caused by user apps at all, so we panic()
in those cases. Wouldn't harm, if someone more knowledgable would check
this, though.
* Removed the unused fault handling stuff, respectively moved the little
that was used into x86/arch_int.c.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@13795 a95241bf-73f2-0310-859d-f6bbb57e9c96
Lots of cleanup:
- moved B_NO_ENABLE_COUNTER flag definition out of int.h to KernelExport.h, as it's
described in the BeBook (although it's probably not really used that often :))
- int.c no longer has any platform dependent code (+ 0x20 on interrupt numbers is gone);
it's now entirely handled in the arch/x86/ section.
- the io_vectors[] is now statically initialized, instead of allocated from the heap
- removed {install|remove}_interrupt_handler(); they weren't that useful, arch_smp_init()
is now calling install_io_interrupt_handler() correctly instead
- introduced a new arch_int.h header file that currently contains NUM_IO_VECTORS only
(though on x86, it also has ARCH_INTERRUPT_BASE == 0x20).
- changed the return type from {install|remove}_io_interrupt_handler() from "long" to
"status_t"
- rearranged and cleaned the PIC initialization code, made the PIC code more prominent
- changed comments that talk about a non existing 8239 (the PIC chip is actually 8259)
- moved arch/x86/interrupts.h to the source directory, as it's not used outside
- added BeOS compatible interrupts_enabled() function, that should replace our
equivalent (and private) are_interrupts_enabled()
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12477 a95241bf-73f2-0310-859d-f6bbb57e9c96
for these changes. I was mostly just staring in amazement at the screen
while Axel and Thomas were discussing IA32 internals. A particularly
fascinating moment was when Thomas produced the cause of a bug we had
been trying to track down for hours off the top of his head (of course
iret behaves specially when the NT bit is set :-). His slowness must be
excused though, since he hadn't slept for more then 30 hours. ;-)
The code doesn't wholeheartedly deal with multi-processor machines yet.
Axel will certainly do some cleanup...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12239 a95241bf-73f2-0310-859d-f6bbb57e9c96
flag. Now, it will choose how to set the granularity by evaluating the
limit.
This call was actually already used this way in the kernel, so that
the TLS and TSS segments were much too large (harmless but incorrect).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12231 a95241bf-73f2-0310-859d-f6bbb57e9c96
Introduced a gBootFrameStack that is used until the first thread structure
is available - this allows stack crawls and useful register dumps during
early startup. Could also be solved differently by making sure there is
always a thread structure installed in %dr3 (ie. the boot thread would
get a static thread structure instead of a static iframe stack only).
This might be a better solution as i386_handle_trap() would no longer
need to check for an existing thread structure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12230 a95241bf-73f2-0310-859d-f6bbb57e9c96
Moved ptentry/pdentry to arch_vm_translation_map.c and renamed them to
page_table_entry and page_directory_entry.
Fixed a race condition that happened when memory was remapped (which
can currently happen because lock_memory() does not work correctly, and
there might be other conditions as well, like certain vm_store fault
handlers). Now, page table and directory entries are updated atomically.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12229 a95241bf-73f2-0310-859d-f6bbb57e9c96
with the bit number, not the respective mask).
* Added a small hack to allow single stepping to work in qemu.
Apparently the BS bit in DR6 is not set when the debug exception
is handled. So we always assume that a single step event occurred,
when we couldn't recognize any other event, if the hack is enabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@11998 a95241bf-73f2-0310-859d-f6bbb57e9c96
we only have 3 debug registers available for break-/watchpoints.
* Added definitions for debug status register DR6. Reordered DR7 defs to
ascending order. Added definitions for the EFLAGS flags we need.
* Added arch_thread_debug_info structure and related definitions.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@11525 a95241bf-73f2-0310-859d-f6bbb57e9c96
needed to get the topmost user iframe. Added i386_get_user_iframe() for
exactly that purpose.
* Added reinitialization of user debugging for the new thread when
switching the context.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@11523 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the parameter for restoring the FPU state const.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@11522 a95241bf-73f2-0310-859d-f6bbb57e9c96
Introduced new arch_vm.h ("public" arch headers have the arch_ prefix).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10384 a95241bf-73f2-0310-859d-f6bbb57e9c96
of BIOS32, SMBIOS, and DMI services.
Also implemented a get_bios32_service() function which you can use to get
access to that service (ie. for use by the PCI bus manager).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10286 a95241bf-73f2-0310-859d-f6bbb57e9c96
from smp_priv.h and stage2_priv.h. Created a new file smp_apic.h which now
contains those definitions.
Made the APIC_xxx register offsets only base offsets (without referencing a
particular variable).
Other small cleanups (i.e. "unsigned int" to uint32).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@2604 a95241bf-73f2-0310-859d-f6bbb57e9c96
Renamed i386_set_kstack() to i386_set_tss_and_kstack(), because that's what
it does.
Added a new function arch_thread_init_tls() which must be called after
having allocated the TLS area.
Renamed arch_thread_initialize_kthread_stack() to arch_thread_init_kthread_stack()
to be more consistent.
Changed the parameters for arch_thread_enter_uspace() - it now gets a pointer
to the thread structure and takes the user stack pointer from there (which
might also be architectural different).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@2379 a95241bf-73f2-0310-859d-f6bbb57e9c96
Moved the tss_descriptor structure to descriptor.h, updated it to be a
segment_descriptor structure, and provided inlines for set_tss_descriptor(),
set_segment_descriptor(), set_segment_descriptor_base(), and
clear_segment_descriptor().
Also added defines for the different privilege levels and descriptor types.
Removed the unusused and incorrect TSS definition, introduced new
TSS_BASE_SEGMENT and TLS_BASE_SEGMENT macros.
Removed include of arch/cpu.h in arch_cpu.h.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@2360 a95241bf-73f2-0310-859d-f6bbb57e9c96
Changed the file_descriptor structure (more status_t, name removed).
Changed "extern inline" to "static inline" in thread.h/arch_thread.h as those
also work with -O0 -g.
Added prototypes for [arch_cpu_]user_strlcpy().
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@1454 a95241bf-73f2-0310-859d-f6bbb57e9c96
Removed dependencies on arch/x86/types.h - this file is not really used
anymore, now. Might prevent compiling on Windows, though.
Replaced "int" with "int32" for the id types.
Removed some stuff from ktypes.h because it didn't belong there.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@1120 a95241bf-73f2-0310-859d-f6bbb57e9c96
A couple of changes in various interrupt and thread functions and structures.
These make it now possible to change the stack at any time without making the kernel crash. This is needed for calling VESA 3.0 VBE functions through the protected mode interface.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@422 a95241bf-73f2-0310-859d-f6bbb57e9c96
