* PRE_BETA_2 is now the default in master.
* For libbe: R1/alpha4 used internal=8, but nobody bumped master
at the same time, so now we are on internal=9.
Replace class with struct, since BJobStateListener is previously declared
as a struct in Job.h
Pointed by clang [-Wmismatched-tags]
Change-Id: I75293b48bcb521d25e98702d1fc1e0ab1008d504
Reviewed-on: https://review.haiku-os.org/482
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Replace struct with class, since it is previously declared as a class
in SharedBufferList.h
Pointed by clang [-Wmismatched-tags]
Change-Id: I3ff4e285862f31a2088a773be2967102bc8b18b6
Reviewed-on: https://review.haiku-os.org/480
Reviewed-by: Barrett17 <b.vitruvio@gmail.com>
TeamDebugger:
- When a job is aborted, instead of calling into the user interface directly
to reset the status message, post a message to do so. Also, only post the
message if we aren't already in a terminating state. Otherwise, if jobs
were still running while the team debugger is executing its destructor, it
would attempt to make calls to the already destroyed user interface. This
bug has likely been with us for quite some time, but was hidden by incorrect
ref counting in the past (see #12343).
Replace 'class' with 'struct', since they are already defined as 'struct'
in PackageInfoAttributeValue.h
Pointed by clang [-Wmismatched-tags]
Change-Id: I094d32c3444fe4299a3afe0872ade296f92debf9
Reviewed-on: https://review.haiku-os.org/471
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The ICU class is named MessageFormat, but on Haiku, it sounds too much
like something related to BMessage (which it isn't in the slightest)
and not part of the Locale system. It works almost entirely with BStrings,
so naming it BStringFormat makes much more sense.
OK'ed by PulkoMandy and Humdinger.
Remove index of portInfos[], since gcc8 warns -Werror=array-bounds
in UserlandFSServer::_Announce().
Change-Id: I79c4ee9d7dc301c54454974698ebd88d1a30750a
Reviewed-on: https://review.haiku-os.org/428
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Consolidate all fdt code into fdt bus_manager
* Build boot and kernel static libraries
Change-Id: I2a69cd7e1f1276999a80734ff12918fd49b599e5
Reviewed-on: https://review.haiku-os.org/440
Reviewed-by: Alexander von Gluck IV <kallisti5@unixzen.com>
memset uses rep stosb on x86 during boot, with memory
not set to write-combining, which makes it slow.
Instead we do aligned writes of 2 x four bytes at once.
Only clear the minimum of size and width * height * 4
UEFI framebuffer size can be huge, upto 512MB here,
and rep stosb seems to be around 25-30MB/s
This is written as generic as possible to work on
old compilers and different platforms, without
expecting boot memset to be optimized.
This makes it almost unnoticable compared to not
clearing.
It will probably be just stubs for the significant future, but,
here it is anyway.
Regarding the naming: Yes, the official name is "aarch64." However,
Linux, FreeBSD, and Zircon all call it "arm64", and so we will do the same.
I've configured it initially to be a Clang-only port, making no
changes to GCC buildtools whatsoever here. We'll see if that sticks,
however.
It seems not all of the kernel includes this, but some use new/delete
anyway. Further, operator delete[] was not implemented at all.
Possibly fixes the ARM build.
Writes to videomem is slow without memory remapping
Can't do the mapping without leaving UEFI, so skipping
the clear. Afaict it should always be cleared by UEFI
This saves ~10 seconds of booting on my machine
(1920*1080*4 bytes)
EFI video mode (should have been it's own commit)
* Only do strcmp if there are enough params
* break when found
* gcc 7.x defines __arm__ and __ARM__ (and others)
* clang defines __arm__ and __arm
* cleanup a few related ifdef vs if macros
Change-Id: I5da4bafac590f6fa3e10e543688001c2449f840d
This reverts commit ec1b18c58a.
This was not well enough reviewed, and it seems that at least some
consumers of the old API (e.g. WebPositive) need more than the new one provides.
Change-Id: Ie7ad1fc70dab889922424298661504b00f66d31d
Fixes#9137
Move scroll bar drawing into HaikuControlLook
Added B_SCROLLABLE flag to BControlLook
Update FakeScrollBar in Appearance to also draw using HaikuControlLook.
Focus works on scroll bars again, used by FakeScrollBar... and probably
nowhere else.
Added private _ScrollingEnabled() convenience method to BScrollBar and
use it in a few places making.
Create ScrollBarPrivate.h header to share a couple of scroll bar related
enums with HaikuControlLook that come from BeOS Scroll Bar prefs.
Stuff arrow_direction enum into BScrollBar::Private as it has been
succeeded by a similar enum already present in BControlLook and is only
around now for BScrollBar::Private::DrawScrollBarButton.
Change-Id: Idc31ee41de091ba45ded2f0315a004af00143803
Repositories are identified with a 'url' in the
remote 'repo.info' file. There is also a
'base url' which is the URL locally with which
the system is able to access the repository
data on. There is some confusion between these
two terms in the source. This change aims to
separate the two out and consistently name them.
The settings for the repository locally also was
not storing these values and that has been fixed.
Debug info about the repositories also did not
display the two urls consistently and will now
also do so. Finally, HaikuDepot now correlates
locally configured repositories with the data in
HaikuDepotServer using the identifier URL; this
makes the use of mirrors with HaikuDepot possible.
Fixes#13888
Change-Id: I66dfe589b05c24e1ab123a6945352e0f24b60bf1
FreeBSD's is presently 46 bytes. CID 1422869 warns that it can get overrun
in if_attach() in copying if_xname which is IF_NAMESIZE bytes (32).
This breaks ABI, but BeOS did not have sockaddr_dl, it is only a modern-GCC
ABI break. Since most applications assume that sockaddr_dl is variable-length
and is null-terminated, as well as not used very often, hopefully this will
require relatively few rebuilds.
Some users of MK_ERROR pass in parameters from a variable called "res",
which is obviously not what they want to do, as that will use this "res"
and not theirs.
Spotted by Clang.
This reverts commit c558f9c8fe.
This reverts commit 44f24718b1.
This reverts commit a69cb33030.
This reverts commit 951182620e.
There have been multiple reports that these changes break mounting NTFS partitions
(on all systems, see #14204), and shutting down (on certain systems, see #12405.)
Until they can be fixed, they are being backed out.
* define compat_thread_info, compat_rlim_t, compat_rlimit and
compat_thread_creation_attributes to be used when applicable in compatibility
mode.
* handle 32-bit types in _user_spawn_thread(), _user_get_thread_info(),
_user_get_next_thread_info(), _user_getrlimit(), _user_setrlimit(),
other syscalls are compatible as is.
* init TLS for compatibility mode threads.
Change-Id: I483ba95e6198ddac9d240671bcb56fcd2ad831d2
* in load_image_internal(), elf32_load_user_image checks whether the binary
format requires the compatibility mode.
* we then set up the flag THREAD_FLAGS_COMPAT_MODE and the address space size.
* the compatibility mode runtime_loader is hardcoded with x86/runtime_loader.
* if needed, the 64-bit flat_args structure is converted in-place to its 32-bit
layout.
* a 32-bit flat_args isn't handled yet (a 32-bit team execs a 64-bit binary).
Change-Id: Ia6a066bde8d1774d85de29b48dc500e27ae9668f
* define compat_area_info to be used when applicable in
compatibility mode.
* handle 32-bit types in _user_reserve_address_range(), _user_get_area_info(),
_user_get_next_area_info(), _user_transfer_area(), _user_clone_area(),
_user_create_area(), _user_map_file(), other syscalls are compatible as is.
* _get_next_area_info() doesn't work well with a 32-bit address cookie (address
could be in 64-bit range). Instead use _compat_get_next_area_info() which uses
the area id as cookie, though the areas are not ordered by address any more.
Change-Id: Ic7519ca8824aa2d534b0f03ea75a1bf6ae321535
* handle 32-bit types in _user_send_signal(), _user_sigaction(), _user_sigwait(),
_user_set_signal_stack(), _user_restore_signal_frame(), other syscalls are
compatible as is.
Change-Id: I4c8dc47bfa80f36e363d444d2a5a7be6c621606d
* define compat_image_info, compat_extended_image_info
to be used for respective 32-bit types of syscalls in compatibility mode.
* handle 32-bit types in _user_register_image, _user_get_image_info,
_user_get_next_image_info, other syscalls are compatible as is.
Change-Id: Ibbd33e6796208dfa70d869e36bf745bc3e18d330
* define compat_flock, compat_timespec, compat_stat, compat_attr_info,
compat_fs_info, compat_fd_info to be used for respective 32-bit types
of syscalls in compatibility mode.
* handle 32-bit types in common_fcntl(), _user_read_stat(), _user_stat_attr(),
_user_read_index_stat, _user_read_fs_info, _user_write_fs_info,
_user_get_next_fd_info, other syscalls are compatible as is.
Change-Id: I5b372169fe142f67b81fd6c27e0627d5119ba687
This reverts commit 4f059c1fc5.
From discussion on the mailing list, it seems I was correct the first time
and Broadwell is Gen8. The confusion comes from the SER5/SOC distinction,
which is not in the Linux driver, and I still don't know which one it really
belongs in.
- Allow to configure the baudrate (it is set by the printer settings,
but the transport didn't care)
- Implement reading from the serial port (some printers will need us to
poll the status and the like, as there is usually no hardware flow
control)
Change-Id: I70ba2566595d5dfa5eda3d518614db6514cb2398
* File locks created by flock should only apply for the file descriptor
that was used to lock the file. Another fd on the same file should then
be denied access (calling flock should fail).
* fcntl based locks, however, are in a separate namespace and are global
to a team.
* This issue was found when running webkitpy test suite, and should close
ticket #13795.
* Don't use session or team as comparison in release_advisory_lock(), as
that information might not be available anymore (e.g. when called from
Team::~Team()). This fixes#14121.
Change-Id: I9efb96cfcefe7e72b0060220c635a665e7e643cc
Co-authored-by: Axel Dörfler <axeld@pinc-software.de>
* GCC7's static analysis found this one and it still
took #gcc and me a while to spot. Nice work gcc7!
* Should help DisplayPort training issues :-)
Change-Id: I9b47f13c95e622a2c08ff329ec9c3fc7e3db493d
* x86 uses a commpage with 32-bit addresses, incompatible with the one used for
x86_64. For this reason, a compatibility commpage is needed to support a 32-bit
userland on x86_64.
* define ADDRESS_TYPE as a macro for addr_t (default) or uint32 (for the 32-bit
commpage).
* team_create_thread_start_internal() will use clone_commpage_area() with
KERNEL_USER_DATA_BASE or clone_commpage_compat_area() with
KERNEL_USER32_DATA_BASE, to setup the correct commpage.
* real_time_clock (in compatibility mode) also updates the compatibility
commpage with real time data.
Change-Id: I61605077ce0beabab4439ef54edd1eae26f26fd2
* define ELF32_COMPAT to enable ELF32 macros.
* add a flag ELF_LOAD_USER_IMAGE_TEST_EXECUTABLE to only check the format.
It will be used by load_image_internal() to check which mode to use when
loading an image.
* in arch_elf_relocate_rel(), switch to elf_addr instead of addr_t, which
would be the wrong size for elf32 on x86_64.
* the ELF compat loader reuses the relevant parts of elf.cpp and arch_elf.cpp,
excluding for instance load_kernel_add_on() or dump functions.
Change-Id: Ifa47334e5adefd45405a823a3accbd12eee5b116
* also adjust BOOT_GDT_SEGMENT_COUNT for x86, the definition is used by the
boot loader.
* add some 32-bit definitions.
* add a UserTLSDescriptor class, this will be used by 32-bit threads.
Change-Id: I5b1d978969a1ce97091a16c9ec2ad7c0ca831656
the size of BAffineTransform is architecture dependent, so we transmit
its contents in a standard array instead.
Change-Id: I907110742168846a869a48bb2d116cc5292ec7d0
This was done using macros before, which isn't the way we have things set up.
In theory that method should work, however if not all consumers include the
libroot_build headers properly, then it breaks in subtle but confusing ways,
which is not what we want at all.
Thanks to Jessica for advice.
Change-Id: Idd45df5547daecf8239932957088da03ddfccf87
* free interrupts, free queues, return to init state.
* this will be used by virtio_net on interface uninit.
Change-Id: I7c1e6facc37cf6bfe19628576fdf2c0bac9e5c38
* enable to iterate on available entries in one interrupt call.
* negociate -> negotiate, (void *) -> (void* ), thanks axel and philippe!
Change-Id: Ie2d290797abcbf4c0f3cb5bfff71d091bb800fa6
It was limited to a uint32 and could for example be overflown by the
slab MemoryManager that uses size_t on a 64 bit system.
This aligns the signature with create_area() that already uses size_t
for the size argument.
Note that the function is currently private, so the impact should be
limited.
John's revert of my removal commit dragged back a bunch of cygwin/sunos
cruft, as well as re-adding RegExp.cpp to the host libshared, that we don't
need.
Instead, remove this and add libgnuregex_build to just the tools/keymap
link alongside the FreeBSD gnuregex case.
* At this point we want to avoid the user calling the callbacks
in the form of BMediaConnection. Instead we force to use the
BMediaInput and BMediaOutput versions.
TypeHandler:
- Add name field for presentation purposes. Adapt subclasses accordingly.
TypeHandlerRoster:
- Add methods to count and retrieve all type handlers for a given type,
and adjust CreateValueNode to allow for passing in an explicit handler.
Adjust callers accordingly.
VariablesViewState:
- Add helpers to store an explicitly chosen type handler for a node.
TypeHandlerMenuItem:
- ActionMenuItem subclass that takes care of reference management
for its contained type handler.
VariablesView:
- Add context menu for choosing type handlers if applicable. Implement
support for invoking said type handlers in a similar manner to explicit
typecasts.
- Adjust saving/restoring the view state so that hidden nodes are taken
into account as well. This is necessary since it may be the case that
the handler had to be applied to the hidden child rather than the visible
node (i.e. the BMessage handler when applied to a pointer to a BMessage).
All together, these changes allow choosing to switch between views of a type
when the Debugger has multiple handlers for it. For example, for BMessages
this allows switching between displaying the raw underlying structure vs
the decoded message content.
