On GCC 7.3, it conflicts with our definition of 'fork'. The documentation
states that disabling builtins has no effect on versions where they
do not exist, so we don't need to check for GCC7 here.
Previously they just silently continued, which meant that if part of the
cross-tools build failed, you would have to scroll back pretty far to
see what the failure was.
* The ram_disk driver was missing in the bootstrap images. Adding
it will allow the ramdisk command to work. And with a modified
haikuports.conf one might even use a ramdisk TREE_PATH.
* The virtio_net driver will probably be handy in some situations.
git_svn needs alien_svn, but we don't include this in the build repos.
Remove it from the preinstalled software, it is available in the depot
if people need it.
John's revert of my removal commit dragged back a bunch of cygwin/sunos
cruft, as well as re-adding RegExp.cpp to the host libshared, that we don't
need.
Instead, remove this and add libgnuregex_build to just the tools/keymap
link alongside the FreeBSD gnuregex case.
Following recent changes to use libroot_build on Haiku also, it is now
actually impossible to build Haiku components on non-Haiku platforms
(BeOS R5, Dan0, BONE, Zeta), so we can remove any logic related to this.
This is only the first part; still to be removed are:
* SetSubDirSupportedPlatformsBeOSCompatible
* HOST_PLATFORM_BEOS_COMPATIBLE
* TARGET_PLATFORM_BEOS_COMPATIBLE
To quote jscipione (from 95e8362c52),
"Let me tell you a story about a bug" -- though this tale spans a much
lesser time than that one did.
In 5e19679ea3, I enabled libroot_build for
Haiku, instead of using the system libroot as we had before. There were
a number of bugs introduced along with this that I hadn't fixed (and there
may be more after this), but most of the obvious ones (crashes on x86_64...)
were fixed shortly enough.
Attribute usage, though, was a different story. Unlike most of the POSIX
calls in libroot, which were aliasing system functions no matter what the
platform, the attribute calls were not, as they are specific to Haiku.
Initially I had completely forgot about them, and it wasn't until a few days
later when I noticed that I had an "attributes" directory in my generated
that I realized that the "generic" attribute layer was being used on Haiku.
I attempted a fix for this in 5e19679ea3,
thinking that would clear the problem up, but I didn't actually run a test
beyond seeing that my BuildConfig had been updated properly. In fact,
BuildSetup was hard-wired to not even pass that definition through on
Haiku, and so that commit had in effect caused nothing.
My initial "fix" of just changing BuildSetup then caused a build failure,
as while libroot_build itself compiled, it ran into errors whenever attributes
were used, because in letting the real libroot's attribute calls shine
through, I had bypassed libroot_build's FD emulation/shim layer.
Then I tried and failed at three separate attempts to solve this with code:
- a version of the "fs_attr_...h" interface for Haiku. This proved possible
in theory, but in practice I would need to reimplement a lot of attribute
handling code in it, because all I had access to from there was syscalls.
- a version of "fs_attr_untyped" that bypassed its reimplementations of
the "fs*attr" functions for the libroot ones, only using the FD shim layer.
This proved possibly not even theoretically possible because it would have
caused preprocessor hell in some of the build headers, and also assumptions
about how attributes are read were totally different.
- a completely new "fs_attr_haiku" that was a completely new interface to
the fs*attr functions. This proved practically impossible because of the
need to include structures from the system libroot to call out to readdir,
etc. that attempts to solve would also have caused preprocessor hell.
Then I realized that the Linux xattr emulation library, which I'd used
as a reference when attempting the first solution, was shipped by default
as a system library in all builds of Haiku ... and so I could just tell
fs_attr_untyped to use the Linux xattr handler, and then link against libgnu.
So that is how I arrived at this strange and decidedly unorthodox solution
to a problem of my own creation.
Per #10267, "Most (ported) third-party software should be removed
from the Haiku source repository."
Since HaikuPorts already has the ncompress package, this file
should no longer exist.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
Original patch missed modifying the "minimum" definition and the
src/bin/Jamfile, so I took care of that.
- Recent changes to the build system appear to make the assumption
that the GNU regex APIs are universally available. This isn't the
case on FreeBSD, which requires libgnuregex to provide that
functionality. This broke the host keymap build.
gnuefi package was replaced by gnu_efi_kernel, but build
was not updated. This is guesswork, as I couldn't track down what changed.
It finds headers, headers_arch and lib and works so should be ok.
It was needed on macOS for a time when BUrl used regexes for parsing.
Now it does not, and so we can remove libshared's RegExp from build
libshared, and thus also libgnuregex.
I wrote this back in 2010 as my first driver project.
Reasons to remove it:
* The license is GPL
* Current WiMAX hardware is generally WIFI based.
* It controlled the hardware, but never worked
for network access since we need SSL certs and stuff
which vendors weren't too open with.
* WiMAX kind of died (at least in the US)
I left the wwan directory, it would be a nice spot
for CDMA / GSM dongle drivers.
Previously we just used the system libroot, which of course meant
that when libroot's ABI changed, the build broke. Now we use the full
libroot_build that we do on non-Haiku platforms. The logic for "BeOS-compatible
but not Haiku" does not really apply anymore, so it has been gutted where
appropriate (and libhaikucompat has been decoupled from the build.)
The only caveat here is the change to Errors.h -- we really should be using
the system's one where I included the one from the tree, but for whatever
reason, GCC2 refused to handle the #include_next properly.
Fixes the build breakage of Haiku-on-Haiku by my prior commits (sorry).
Previously --update was kind of a hack, as it just dumped all
the variables from BuildConfig back into ./configure and attempted
to rerun from there.
Instead, now we store all of the variables and environs configure
was invoked with in the top of BuildConfig and re-call it using them.
This is much more robust, as configure will actually recompute
all of the values from the BuildConfig.
As a side effect, if configure was originally invoked to build crosstools,
it would have done so again, so instead add a check to see if they
exist, and skip them if they do. It's easy enough to delete the
directory if you want to force a crosstools rebuild.
Briefly discussed with mmlr on IRC.
Instead build the one in-tree from src/data/package_infos/. Fixes the
"HaikuPorts repos have wrong URL" problem that has occured since the
switch to buildmaster repos.
When compiling with GCC, these headers get pulled in from the
gcc_syslibs_devel package, but we cannot do something similar
for Clang as Clang adds/removes internal builtins used by
the headers nearly every version. So instead we just copy
all the intrinsics headers from current Clang into generated,
and make sure this directory is included before any others.
* Actually locate the clang executable, and allow user overrides
* Properly preserve arguments in get_build_tool_path
* Fix get_build_tool_path for commands with dashes (e.g. "clang-5.0")
* Update repository file to hardlink_packages modified one.
* Add some basic process overview to directory.
* We don't normally document in paths, but this stuff is complex.
* Documentation improvements welcome.
* Hashing semantics for the new build repositories are different than
the old ones, so update those (if the x86 build was not broken before
it is now...)
* OptionalPackages has been updated slightly (removed libtool and git_cvs
from the default images, as they are rarely used nowadays and would pull
in a bunch of dependencies we don't really care for either)
* Removed lib:libqrencode from Haiku package requires (qrencode_kdl is a
static library, the userland libqrencode is not used anywhere in the tree,
as far as I can tell)
* Fix build of JPEG2000 translator after update
* Decouple fluidsynth build machinery and remove from image now that it
is no longer used
* Update repository URL in Repositories preflet
x86 is unaffected, as already mentioned. This breaks the build,
but since this diff was large, I wanted to have the functionality
changes be clear, so they are in the next commit.
The packages that remain are only the ones used somewhere in Jam
(including ones off by default, e.g. Wonderbrush, Live555.)
The x86 repo is untouched as it is being phased out and has no buildmaster-
generated equivalent.
It was trying to use $(feature:U) outside of the loop where it is
actually set. Thanks to PulkoMandy for spotting the problem.
(How did this not break tons of stuff?)
libmedia.so was used by at least 2 apps included in the minimum image,
Activity Monitor and Deskcalc which subsequently failed to load on minimum.
Deskcalc wasn't actually using libmedia.so so I managed to get it to link and
run on minimum, however, Activity Monitor is using libmedia.so so needed it
to be present.
To fix this I added libmedia.so to the minimum image, I hope this does not blow
its size budget. (adds 1.0MB)
* Previously, the cross-compiler would generate code that doesn't
run on Haiku, particularly where TLS is concerned. It also ended
up with a c++config.h header incompatible with the version in
the native compiler.
* Now possible to correctly cross-compile rust for Haiku.
Among other fixes and more translations, there's now an "Import"
feature to merge in another catkeys file.
Handy when the en.catkeys changed and you want to import the translated
catkeys file for the previous version, which already contains the
translations for the strings that haven't changed.
Hmm... hope what I wrote there is decipherable...
No longer used by anything (it appears some old kernel drivers that
are not included in the build might use it, but I don't know why
they need it -- we already ship GPL'd code [libntfs] for the kernel
in the default build unconditionally.)
Briefly discussed with js a few weeks back.
* Remove the target-board system.
* From now on, we target generic non-x86 architectures
while leveraging fdt when needed.
* ARM mmc images will likely need some post-processing to make
them bootable on individual hardware. (This is actually how
distros like Fedora handle ARM now. The image 'writer' application
is told what hardware the image is for and adds a vendor bootloader
/ SPL / u-boot / etc)
* Eventually BoardSetups and target boards will go away.
* Include all known fdt's in the mmc image
* This gets us closer to target board-less arm
* Changing hardware is as simple as plugging a new fdt
into u-boot's startup script.
* Drop my original rpi1 work. We're targetting ARMv7
minimum.
- hub: had an annoying problem preventing to run the script directly.
Now uses a proper "shebang" so it finds ruby.
- mako, setuptools: needed to build Mesa.
- neonlights: my favorite screensaver.
- python 3.6.
- advancemame, for arcade gaming on Haiku.
- sox and gnuplot, for various experiments.
* Hasn't been used for quite some time
* Everything was ported over to a new ATA stack
some time ago.
* No huge regressions were seen from the new ATA
stack.
* built in non-strict mode: dovecot, qupzilla, r
* build failed: intltool (dep of gcab and transmission), python_html2text, vlc,
cython (dep of pyenet)
* not built because of an unsafe source: qutim
* removed compatibility packages for giflib, icu, tiff, libpng, libwebp, libbluray,
libpcre, libvpx, ncurses, readline.
* built in non-strict mode: dovecot, qupzilla, r
* build failed: intltool (dep of gcab and transmission), python_html2text, vlc,
cython (dep of pyenet)
* not built because of an unsafe source: qutim
* removed compatibility packages for giflib, icu, tiff, libpng, libwebp, libbluray,
libpcre, libvpx, ncurses, readline.
* built in non-strict mode: dovecot, qupzilla, r
* build failed: intltool (dep of gcab and transmission), python_html2text, vlc,
cython (dep of pyenet)
* not built because of an unsafe source: qutim
* removed compatibility packages for giflib, icu, tiff, libpng, libwebp, libbluray,
libpcre, libvpx, ncurses, readline.
* built in non-strict mode: dovecot, qupzilla, r
* build failed: intltool (dep of gcab and transmission), python_html2text, vlc,
cython (dep of pyenet)
* not built because of an unsafe source: qutim
* removed compatibility packages for giflib, icu, tiff, libpng, libwebp, libbluray,
libpcre, libvpx, ncurses, readline.
* The app_server isn't designed to support two fallback drivers, so
on systems using UEFI to boot, the framebuffer driver will often
win when other drivers would likely work on those systems.
* Enables us to add an optional EFI filesystem
to the anyboot image.
* All existing anyboot behaviour is preserved.
* We still need to figure out how to build bios
and EFI loaders at the same time on x86.
* The tiny "fake ISO" still needs el-torito
alt-boot for the EFI loader to work when burned
to a CD. This makes the EFI loader work when
written to a hard disk / flash drive.
* Favorites can now be drag & dropped on apps that accept a program,
like LaunchBox - or in fact the ignore list of the Setup window.
* Favorites cannot be moved any longer in a result list, only in the
favorites list.
* When opening an app's containing folder, scroll to and select the
app.
* Fix crash due to a race condition.
* Closes issues: #14, #13, #12
BFont::Blocks is now implemented in ServerFont, via a call through the
app_server. It uses fontconfig to iterate through a charset of a font
and stores the defined blocks in a bitmap.
A new API was added, BFont::IncludesBlock, that will allow for arbitrary
testing of a given Unicode block. Since nothing is cached, searching
through an entire charset for a series of Unicode blocks can be quite
slow. In a given block there may be only 1 or 2 characters actually
defined so every character within a block needs to be checked until one
is found, which in a degenerate case will mean the entire block is
checked.
Signed-off-by: Axel Dörfler <axeld@pinc-software.de>
We bundle bitstream charter as a default font to use when nothing else
is available. We also used to bundle a Courier font, but it does not
work properly.
- Fix the license for Bitstream Charter, to include just the license and
no extra text.
- Add said license to AboutSystem
- Remove the Courier font from the package and from the source tree.
Fixes#11696.
* podofo 0.9.5 isn't compatible with 0.9.4.
* grep compatible with version 2.
* mercurial requires python2 instead of python.
* scribus is rebuilt with newer podofo.
Needed a quick new release:
* Fix disappearing favorites.
* Add context menu with quick access to favorites and QuickLaunch's
"About" to Deskbar replicant.
* Updated localization and documentation.
* Tiny tweaks to the QuickLaunch icon.
- Both Noto and Noto Sans CJK JP are now used as font fallbacks,
allowing to cover a rather large range of characters. This also makes
it possible to mix the two fonts easily.
- Remove VL-Gothic from packages and from AboutSystem
- Add Noto fonts to the dependencies of the Haiku package.
This provides a similar look for all languages as discussed on the
mailing list.
* Added a "Free registration" text file. As the user has to
re-register from time to time for some reason, it may be
easier to find the info in a text file in the app's folder
than looking into the decription of SynC Modular in HaikuDepot.
* FuseSMB provides access to shared files and folders over SMB.
It features automatic discovery of servers and shares and
displays them as a folder hierarchy in a virtual volume on the
desktop
* Supports interactive authentication to access shares which require
login. Just open it, and a dialog pops up. Login data is stored in
BKeyStore.
* Comes with a network preferences add-on to easily enable and
configure it. No barbaric manual typing of mount commands required!
* Makes use of Haiku FUSE extensions to give custom MIME types with
icons for workgroup/share/server folders. Thanks again to humdinger
for designing the workgroup and share icons!
* Although the used libsmbclient only supports SMB protocol
version 1, performance is decent enough. Getting around ~75MiB/s
reading over a GbE link here
This reverts commit 945566ff43.
As discussed on the mailing lists and with Humdinger off-list:
* The general design concensus tends slightly towards DejaVu, as metrics
of DejaVu look much better (DejaVu 12 and Noto 13 are roughly the same size,
but Noto has much wider margins with that)
* While Noto does have a wider set of fonts with support for lots of
different languages, DejaVu actually has built-in support for more
Unicode languages (the default Noto has, as far as I can tell, only
Latin/Greek/Cyrillic [2416 glyphs], while DejaVu also has Armenian, Georgian,
and a few other scripts too [5119 glyphs].)
* The worse rendering of DejaVu appears to have been somewhat rectified by
disabling the average-based subpixel filter in app_server.
* When --host-only is used, HAIKU_*ARCH is undefined.
* Various architecture variables are undefined resulting
in architecture dependant code paths getting called
recursively.
(blah/Jamfile loads blah//Jamfile vs blah/x86/Jamfile)
* Another option is setting HAIKU_*ARCH to the host arch
if undefined, but that might have unintended impacts.
Release v1.0
Fewer bugs, full of drag&drop.
* Add clips to favorites and re-ordering favorites with drag & drop.
* Drag & drop clips and favorites into other apps.
* Power user feature: holding SHIFT while pasting to sprunge.us keeps window
open.
* Made history clips titles editable as well.
* Made the GUI unambiguous. There's only ever one clip shown as active.
* Added menu items that apply to clips/favorites, re-ordered context menus.
* Renamed menu to "Lists" and added item to "Clear favorites".
* Added Romanian translation. Thanks Emrys!
* Updated Russian translation. Thanks Diver!
* Bug fix: Fixed drawing errors of split view handle on resize.
* Bug fix: Fixed issues when starting without settings file.
* Bug fix: Fixed crash when trying to paste to sprunge.us with no selection.
* Bug fix: Put formerly 2nd clip into clipboard when 1st was removed.
* Bug fix: Correctly show GUI controls availablity (e.g. the move buttons).
- This is the latest from the 0.10 branch.
- It includes several improvements and update to codecs, while keeping
the old API.
- The patch to keep things working with gcc2 is getting quite huge.
Tested working with various files, no regressions spotted so far. Please
help complete the test set if you have files that stop working with this
version.
There are some delays in making the actual package repo generated by the
buildbot go live. Until then, I'm going to manually update the existing
repositories with the built packages, so people can start to experiment
with them and report any new issues.
There are more updates coming, but I'm doing them gradually so we can see
which set of packages triggers a regression, should one happen.
This is separate to the VESA driver, as the VESA driver requires
using the VBE BIOS. Under UEFI, we don't have the VBE BIOS, nor
are we able to switch modes after leaving UEFI Boot Services, so
a dumb framebuffer driver seemed like the easier way to approach
the problem.
The framebuffer & vesa drivers now test for the presence of the
VESA_MODES_BOOT_INFO boot item to distinguish between which driver
to use. Also added check for the VESA mode count to determine
whether to add the VESA_MODES_BOOT_INFO item.
UEFI video updated to explicitly zero out the VESA and EDID
boot data.
Revert "repo rework: Remove stubs; Breaks repo compat."
Revert "repo rework: Remove need for repos to be self-aware"
This reverts commit a2b2f4d642.
This reverts commit 602076ef82.
This reverts commit 5ffaf72c8a.
These changes break the build on Haiku and the ability to create repo
mirrors, for the lack of a replacement for the URL (an UUID was evoked
on the mailing lists, but not implemented).
We are due for a release soon, please don't break the build.
