23139 into trunk, with roughly the following changes (for details svn
log the branch):
* The int 99 syscall handler is now fully in assembly.
* Added a sysenter/sysexit handler and use it on Pentiums that support
it (via commpage).
* Got rid of i386_handle_trap(). A bit of functionality was moved into
the assembly handler which now uses a jump table to call C functions
handling the respective interrupt.
* Some optimizations to get user debugger support code out of the
interrupt handling path.
* Introduced a thread::flags fields which allows to skip handling of
rare events (signals, user debug enabling/disabling) on the
common interrupt handling path.
* Got rid of the explicit iframe stack. The iframes can still be
retrieved by iterating through the stack frames.
* Made the commpage an architecture independent feature. It's used for
the real time data stuff (instead of creating a separate area).
* The x86 CPU modules can now provide processor optimized versions for
common functions (currently memcpy() only). They are used in the
kernel and are provided to the userland via commpage entries.
* Introduced build system feature allowing easy use of C structure
member offsets in assembly code.
Changes after merging:
* Fixed merge conflict in src/system/kernel/arch/x86/arch_debug.cpp
(caused by refactoring and introduction of "call" debugger command).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23370 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed a few instances where the page state was set busy directly after
allocating it. This is a no-op, since a page is always busy after
allocation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21875 a95241bf-73f2-0310-859d-f6bbb57e9c96
Will be used for node monitoring and other stuff, too (like the Registrar or the
VM low memory handler).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21768 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Images preloaded by the boot loader had to be modules to be of any use
to the kernel. Extended the mechanism so that any images not accepted
by the module code would later be tried to be added as drivers by the
devfs. This is a little hacky ATM, since the devfs manages the drivers
using a hash map keyed by the drivers inode ID, which those drivers
obviously don't have.
* The devfs emulates read_pages() using read(), if the device driver
doesn't implement the former (all old-style drivers), thus making it
possible to BFS, which uses the file cache which in turn requires
read_pages(), on the device. write_pages() emulation is still missing.
* Replaced the kernel_args::boot_disk structure by a KMessage, which can
more flexibly be extended and deals more gracefully with
arbitrarily-size data. The disk_identifier structure still exists,
though. It is added as message field in cases where needed (non net
boot). Moved the boot_drive_number field of the bios_ia32 platform
specific args into the message.
* Made the stage 1 PXE boot loader superfluous. Moved the relevant
initialization code into the stage 2 loader, which can now be loaded
directly via PXE.
* The PXE boot loader does now download a boot tgz archive via TFTP. It
does no longer use the RemoteDisk protocol (it could actually be
removed from the boot loader). It also parses the DHCP options in the
DHCPACK packet provided by PXE and extracts the root path to be
mounted by the kernel.
* Reorganized the boot volume search in the kernel (vfs_boot.cpp) and
added support for network boot. In this case the net stack is
initialized and the network interface the boot loader used is brought
up and configured. Since NBD and RemoteDisk are our only options for
net boot (and those aren't really configurable dynamically) ATM, the
the boot device is found automatically by the disk device manager.
Booting via PXE does work to some degree now. The most grievous problem
is that loading certain drivers or kernel modules (or related activity)
causes a reboot (likely a triple fault, though one wonders where our
double fault handler is on vacation). Namely the keyboard and mouse input
server add-ons need to be deactivated as well as the media server.
A smaller problem is the net server, which apparently tries to
(re-)configure the network interface we're using to boot, which
obviously doesn't work out that well. So, if all this stuff is disabled
Haiku does fully boot, when using the RemoteDisk protocol (not being
able to use keyboard or mouse doesn't make this a particular fascinating
experience, though ;-)). I had no luck with NBD -- it seemed to have
protocol problems with the servers I tried.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21611 a95241bf-73f2-0310-859d-f6bbb57e9c96
libroot). It's available in the kernel through the private
get_haiku_revision() and added to the kernel syslog output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21173 a95241bf-73f2-0310-859d-f6bbb57e9c96
Basically, there was a pretty subtle race between the cpus in main where if the main cpu released the AP cpus and then before the AP cpus had a chance to run the boot cpu started creating the main thread (which causes smp ici messages to be created) the system would livelock, where the boot cpu waited forever for the AP cpu to acknowledge the ICI (for a TLB flush when creating the kernel stack).
Added smp_cpu_rendezvous(), used to synchronize all the cpus to a particular point, and used it a few times in main().
While i was at it i fixed another race that'll probably never happen, but what the hey. Make sure the kernel args are copied into kernel space by the main cpu before letting any other ones use it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20269 a95241bf-73f2-0310-859d-f6bbb57e9c96
the new cpuid stuff was apparently exacerbating an existing problem where various bits of low level
cpu code (specifically get_current_cpu) weren't really initialized before being used. Changed the
order to set up a fake set of threads to point each cpu at really early in boot to make sure that at
all points in code it can get the current 'thread' and thus the current cpu.
A probably better solution would be to have dr3 point to the current cpu which would then point to the
current thread, but that has a race condition that would require an int disable, etc.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20160 a95241bf-73f2-0310-859d-f6bbb57e9c96
away cpuid info into the current cpu structure. Trouble was the code was running before the current
thread pointer was set on each cpu, so it was always looking up cpu 0's structure and saving there,
leaving the other ones uninitialized. Surprisingly this works fine on my machine, but obviously fails
on others (cpuid info would have been zeroed probably). Solution is to change the order that things
are brought up on each cpu to set the current thread pointer first. I don't really like that solution
but it'll work for now. Added a comment to the effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20154 a95241bf-73f2-0310-859d-f6bbb57e9c96
at boot, per cpu, detect the cpu, pull down all the relevant cpuid bits and
save them into the per-cpu structure. Changed most of the code scattered here
and there that reads the cpuid to use a new api, x86_check_feature, which looks
at the saved bits.
Also changed the system_info stuff to read from these bits.
While i was at it, refreshed all the bits to be current.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20072 a95241bf-73f2-0310-859d-f6bbb57e9c96
commented the insertion of the attribute name in patterns in the case of a string attribute
notify_probe_by_file chooses a module based on a bus specific suffix
dm_register_child_device has a parameter to optionally check the support for the node
added scanning of bus devices after the boot filesystem is mounted
fixed dm_rescan, locking was misbehaving
fixed SYSTEM_DRIVER_REGISTRATION definition
added B_DRIVER_MAPPING attributes for PCI and ACPI devices:
%vendor%_%device% for PCI, hid_%hid% and type_%type% for ACPI
moved acpi_device_module_info definition to public ACPI.h
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19394 a95241bf-73f2-0310-859d-f6bbb57e9c96
the next step would be to rescan the partition tree with a job to recognize unrecognized partitions (asynchronously ?)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18737 a95241bf-73f2-0310-859d-f6bbb57e9c96
the device manager is initialized. For x86 it does nothing, but
for PPC it searches for a supported interrupt controller and
remembers it for later use.
arch_int_{enable,disable}_io_interrupt() are implemented as
well as handling of external exceptions (aka as I/O interrupts).
We'll see later how well that works.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16271 a95241bf-73f2-0310-859d-f6bbb57e9c96
Basically the architecture specific code is now responsible to
init and make use of the platform specific code, now. The reason
being that we have only one kernel per platform and thus cannot
decide at compile time, which platform to use (if any).
The PPC implementation features an abstract base class PPCPlatform
(implemented for all supported platforms) through which platform
support is provided.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15824 a95241bf-73f2-0310-859d-f6bbb57e9c96
{HAIKU,HOST,TARGET}_KERNEL_PIC_{CC,LINK}FLAGS which define the
compiler/linker flags specifying the kind of position independence
the kernel shall have. For x86 we had and still have -fno-pic, but the
PPC kernel has -fPIE (position independent executable) now, as we
need to relocate it.
* The boot loader relocates the kernel now. Mostly copied the relocation
code from the kernel ELF loader. Almost completely rewrote the PPC
specific relocation code, though. It's more correct and more complete now
(some things are still missing though).
* Added boot platform awareness to the kernel. Moved the generic
Open Firmware code (openfirmware.c/h) from the boot loader to the kernel.
* The kernel PPC serial debug output is sent to the console for the time
being.
* The PPC boot loader counts the CPUs now and allocates the kernel stacks
(made OF device iteration a bit more flexible on the way -- the search
can be restricted to subtree). Furthermore we really enter the kernel...
(Yay! :-) ... and crash in the first dprintf() (in the atomic_set()
called by acquire_spinlock()). kprintf() works, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15756 a95241bf-73f2-0310-859d-f6bbb57e9c96
service depends on it, it doesn't make any sense to call it that early in the
game.
* The VFS now has a low memory handler for vnodes as well. If there is enough
memory left, it won't free any vnodes anymore.
* Potential crashing bug fix: some functions did not check if the FD passed
in belonged to the right type; they just assumed it had a valid vnode, but
it could have had a mount structure associated as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15566 a95241bf-73f2-0310-859d-f6bbb57e9c96
has not yet been tested, though - I'll do this after this commit):
* Removed the arch_memory_type stuff from vm_area; since there are only 8 memory
ranges on x86, it's simply overkill. The MTRR code now remembers the area ID
and finds the MTRR that way (it could also iterate over the existing MTRRs).
* Introduced some post_modules() init functions.
* If the other x86 CPUs out there don't differ a lot, MTRR functionality might
be put back into the kernel.
* x86_write_msr() was broken, it wrote the 64 bit number with the 32 bit words
switched - it took me some time (and lots of #GPs) to figure that one out.
* Removed the macro read_ebp() and introduced a function x86_read_ebp()
(it's not really a time critical call).
* Followed the Intel docs on how to change MTRRs (symmetrically on all CPUs
with caches turned off).
* Asking for memory types will automatically change the requested length to
a power of two - note that BeOS seems to behave in the same, although that's
not really very clean.
* fixed MTRRs are ignored for now - we should make sure at least, though,
that they are identical on all CPUs (or turn them off, even though I'd
prefer the BIOS stuff to be uncacheable, which we don't enforce yet, though).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15528 a95241bf-73f2-0310-859d-f6bbb57e9c96
Extracted scheduler_init() from start_scheduler() (which is now called scheduler_start()).
Moved scheduler related function prototypes from thread.h to the new scheduler.h.
Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14518 a95241bf-73f2-0310-859d-f6bbb57e9c96
user application performs a division by zero or causes a general
protection fault. For some exceptions (e.g. machine check) I wasn't
quite sure whether they can be caused by user apps at all, so we panic()
in those cases. Wouldn't harm, if someone more knowledgable would check
this, though.
* Removed the unused fault handling stuff, respectively moved the little
that was used into x86/arch_int.c.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@13795 a95241bf-73f2-0310-859d-f6bbb57e9c96
no items can be removed from that list - nevertheless, it's wrong.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@13088 a95241bf-73f2-0310-859d-f6bbb57e9c96
called by debug_init_post_vm().
Since the availability of a blue screen specific getchar() is static anyway, there
is no need for the sBlueScreenGetChar variable (only the message "only serial input
available" gets lost, but since that is platform specific anyway...).
Hello blue screen! We now have an on-screen KDL, to be enabled by the kernel
setting "bluescreen", just like on BeOS.
The blue screen does not yet support any cursor actions or backspace, though (need
to grab some stuff from our console driver).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12896 a95241bf-73f2-0310-859d-f6bbb57e9c96
kernel_debugger() didn't do enough before; panic() did all the work - but
since the former is a public function as well, I moved all the functionality
to it. Also fixed a possible buffer overrun in panic().
Renamed dbg_* to debug_*.
"serial_debug_port" setting did not ignore negative values.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12889 a95241bf-73f2-0310-859d-f6bbb57e9c96
