header flags after copying the header of the original message. Before
cloning a message that still needed a reply would result in the clone
also needing a reply, which, in the end, led to two replies being sent,
thus screwing up the cached reply ports used for synchronous messaging.
Fixes bug #1008.
BTW, also clearing the reply info breaks Tracker and Deskbar, so I suppose
R5 keeps it and Tracker and Deskbar rely on that behavior.
* Added a bit of debug code removing and printing spurious messages from a
cached reply port.
* Added TODO in BMessage::~BMessage(). ATM, we only send a B_NO_REPLY in the
destructor, but not in case the message is overwritten using the
assignment operator or Flatten().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20074 a95241bf-73f2-0310-859d-f6bbb57e9c96
set the status to "_status" instead of the actual status.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20073 a95241bf-73f2-0310-859d-f6bbb57e9c96
at boot, per cpu, detect the cpu, pull down all the relevant cpuid bits and
save them into the per-cpu structure. Changed most of the code scattered here
and there that reads the cpuid to use a new api, x86_check_feature, which looks
at the saved bits.
Also changed the system_info stuff to read from these bits.
While i was at it, refreshed all the bits to be current.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20072 a95241bf-73f2-0310-859d-f6bbb57e9c96
then the overhead of a call into libroot, and finally the overhead of a syscall
(using is_computer_on).
The numbers are totally abysmal right now. :(
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20070 a95241bf-73f2-0310-859d-f6bbb57e9c96
Replaced the _kern_null syscall with _kern_is_computer_on.
is_computer_on_fire is a bit harder, since it returns a float from kernelland, which
at the moment isn't supported in haiku.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20069 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the "Set to..." submenu from the "Close and" menu; instead, all items
are now added to the same level, which makes this menu more useful and easier
to use.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20068 a95241bf-73f2-0310-859d-f6bbb57e9c96
ui_color(B_PANEL_BACKGROUND_COLOR) instead.
* Cleanup, simplified TStatusWindow.
* Did not fix font sensitivity issues in TStatusWindow (but that's also
not for Ryan, as MDR should stay compilable on R5 as well for now).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20067 a95241bf-73f2-0310-859d-f6bbb57e9c96
* replaced new[] with malloc()/realloc() where appropriate - since we're messing with
the bits anyway, this makes the code slightly faster.
* however, we might want to throw some std::bad_alloc exceptions to deal correctly with
low memory situations.
* cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20065 a95241bf-73f2-0310-859d-f6bbb57e9c96
I don't know why (or how) it could work before r19775, though.
This fixes the wrong return code from wait_for_thread() in most cases, and thus,
bug #1011.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20060 a95241bf-73f2-0310-859d-f6bbb57e9c96
locking problems (instead of debugging the locker class).
* MultiLocker::IsReadLocked() is now only exported with DEBUG mode turned on, as
it only works correctly in this case.
* Made MultiLocker safe against B_INTERRUPTED, ie. it now just tries to lock again
instead of failing for no obvious reason.
* Removed bogus arguments to acquire_sem_etc() in MultiLocker (like B_DO_NOT_RESCHEDULE).
* Applied coding style to MultiLocker.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20055 a95241bf-73f2-0310-859d-f6bbb57e9c96
just the one of the first screen. This also solves a locking bug, as the HWInterface
is already read-locked when WorkspacesLayer::Draw() is called.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20054 a95241bf-73f2-0310-859d-f6bbb57e9c96
Semaphore::ZeroCount() on new semaphores, not on used ones. Found by Stefano, thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20052 a95241bf-73f2-0310-859d-f6bbb57e9c96
Rewrote url parsing (unfinished)
Added several url types. Now it handles: ftp, sftp, telnet, ssh, finger, sh, file, beshare (to BeShare), mms, rtp, rtsp (to VLC). Some make probably more sense to add to the respective apps (BeShare, VLC...) but it's still handy for now.
Now please everyone go fix your apps to use generic url support instead of hardcoding http: :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20048 a95241bf-73f2-0310-859d-f6bbb57e9c96
does. Marcus, what problem did you encounter?
The BuildPXEstage1 actions use "as" ATM, which is not correct, since it
should actually use the target platform assembler (i.e.
cross-compilation won't work). It should be replaced by $(TARGET_CC),
but that results in the following errors, when compiling with gcc 2.95.3:
/home/bonefish/develop/haiku/haiku/src/system/boot/platform/pxe_ia32/pxe_stage1.S:
Assembler messages:
/home/bonefish/develop/haiku/haiku/src/system/boot/platform/pxe_ia32/pxe_stage1.S:39:
Error: missing ')'
/home/bonefish/develop/haiku/haiku/src/system/boot/platform/pxe_ia32/pxe_stage1.S:96:
Error: `0x6(%edx)' is not a valid 16 bit base/index expression
/home/bonefish/develop/haiku/haiku/src/system/boot/platform/pxe_ia32/pxe_stage1.S:102:
Error: `0xa(%edx)' is not a valid 16 bit base/index expression
/home/bonefish/develop/haiku/haiku/src/system/boot/platform/pxe_ia32/pxe_stage1.S:127:
Error: `2(%edx)' is not a valid 16 bit base/index expression
/home/bonefish/develop/haiku/haiku/src/system/boot/platform/pxe_ia32/pxe_stage1.S:128:
Error: `0(%edx)' is not a valid 16 bit base/index expression
/home/bonefish/develop/haiku/haiku/src/system/boot/platform/pxe_ia32/pxe_stage1.S:147:
Error: `16(%ebx)' is not a valid 16 bit base/index expression
/home/bonefish/develop/haiku/haiku/src/system/boot/platform/pxe_ia32/pxe_stage1.S:149:
Error: `20(%ebx)' is not a valid 16 bit base/index expression
/home/bonefish/develop/haiku/haiku/src/system/boot/platform/pxe_ia32/pxe_stage1.S:173:
Error: `2(%edx)' is not a valid 16 bit base/index expression
/home/bonefish/develop/haiku/haiku/src/system/boot/platform/pxe_ia32/pxe_stage1.S:174:
Error: `0(%edx)' is not a valid 16 bit base/index expression
/home/bonefish/develop/haiku/haiku/src/system/boot/platform/pxe_ia32/pxe_stage1.S:298:
Error: `(%esi)' is not a valid 16 bit base/index expression
/home/bonefish/develop/haiku/haiku/src/system/boot/platform/pxe_ia32/pxe_stage1.S:299:
Error: `(%edi)' is not a valid 16 bit base/index expression
/home/bonefish/develop/haiku/haiku/src/system/boot/platform/pxe_ia32/pxe_stage1.S:306:
Error: `(%esi)' is not a valid 16 bit base/index expression
/home/bonefish/develop/haiku/haiku/src/system/boot/platform/pxe_ia32/pxe_stage1.S:307:
Error: `(%edi)' is not a valid 16 bit base/index expression
For the gcc 4 configuration all but the first errors disappear. It looks
like these are bugs in older assembler version. Any reasonable
work-around?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20043 a95241bf-73f2-0310-859d-f6bbb57e9c96
Currently supported are telnet:, ssh: and ftp:. Now you should be able to click telnet://towel.blinkenlights.nl on a webpage or in Vision :)
TODO: Jamfile; handle ":port" in urls.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20037 a95241bf-73f2-0310-859d-f6bbb57e9c96
I've tested it and it seems to work. Could someone else please confirm that everything still works well?
Hmm, I'm still wondering why Axel took the time to suggest a possible solution to me instead of fixing it himself. There must be a catch. ;)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20036 a95241bf-73f2-0310-859d-f6bbb57e9c96
by Jon Watte.
This was a tough but interesting problem. My version still isn't quite as nice
as his. I think the color generation could be improved, and I KNOW the x and y
placement of the text could be improved.
I also think it would be nice to display the full message at the bottom of the
screen (similar to ShowImage showing the file type and name in full screen
mode.)
But this is a good base to work from.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20035 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed compilation under R5.
* Made Revert more user-friendly by also allowing to revert settings to the previously active state after having pressed Apply. This only works if you didn't make new changes in the meantime. In that case, only the new changes will be reverted.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20031 a95241bf-73f2-0310-859d-f6bbb57e9c96
haiku.image. It is now created when print_server or the Printers preflet
is started.
Applied coding style.
"Flattened" some nested if statements.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20030 a95241bf-73f2-0310-859d-f6bbb57e9c96
this fixes bug #1005. As a result, the Disks icon will now appear in file panels
when you change that setting with a panel open.
* _ObserverList is now in the BPrivate namespace (and renamed to ObserverList).
* its BHandler map is now only temporarily used for handlers that do not belong to
a looper yet; when BHandler::SendNotices() is called, they will be transferred
into the BMessenger map.
* Invalid messengers are now removed from the map when encountered.
* Added TODO comments about a possible reference counting if a handler is added
twice to a list (right now, this will be ignored).
* All {Start|Stop}Watching() methods are now more or less safe to be used in low
memory situations (adding some items to the map can still throw an exception...).
* Renamed BHandler::InitData() to _InitData().
* Some refactoring and cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20029 a95241bf-73f2-0310-859d-f6bbb57e9c96
* we now always flush the TLBs after having unmapped some pages.
* vm_soft_fault() could traverse to a source cache while it was being collapsed
by vm_cache_remove_consumer() - this is now no longer possible as the latter
marks the cache as busy when doing so, and the former now tests this flag and
locks the cache (via the new fault_acquire_locked_source() function).
* if fault_acquire_locked_source() fails with B_BUSY, the current cache is locked
again, and tested again for the page - as it might have been moved upwards to it
with the destruction of its former source.
* The cache delivering the page for vm_soft_fault() is now locked until the end;
it can no longer go away before having actually mapped the page into the area.
* This also fixes the issue where pages would get lost as vm_soft_fault() put the
page in the active list, no matter if its cache still existed.
* Also, we now keep a reference of to a cache in case a dummy page is inserted; this
makes again sure that it doesn't go away during the execution of vm_soft_fault()
(which could even add this page to the free list...).
* divided vm_soft_fault() into several smaller functions which should make it much
more readable.
* Added a "cache_chain" KDL command that dumps the whole chain until the bottom
when giving a pointer to a vm_cache as parameter.
* now usually call vm_cache_acquire_ref() before map_backing_store(), even though
it shouldn't be really needed (I added it for debugging purposes).
* Some minor cleanup.
* NOTE: a major problem still persists: when removing a vm_cache, it's possible
that some of its pages are still mapped, and there is currently no mechanism
to get rid of these mappings! I've added TODO comments into vm_cache.c where
appropriate.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20028 a95241bf-73f2-0310-859d-f6bbb57e9c96
tested on Qemu with aslcompiler.l => it takes more than 1m30s here, and shows a bottleneck in the kernel (the use of pipes)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20025 a95241bf-73f2-0310-859d-f6bbb57e9c96
Also prepare uname to return the build SVN revision number,
which will work only if I could figure out how to define it from Jamfile.
Or, better, in build/jam/BuildSetup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20023 a95241bf-73f2-0310-859d-f6bbb57e9c96
huge deal but it doesn't make much sense to resize images during a slideshow.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20020 a95241bf-73f2-0310-859d-f6bbb57e9c96
The "lookup" option has been removed, there is now a "-p" for a physical address, and
"-v" for a virtual address.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20016 a95241bf-73f2-0310-859d-f6bbb57e9c96
this fixes the ticket #627.
Ingo, could you review ? This check might also be needed at other places.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20014 a95241bf-73f2-0310-859d-f6bbb57e9c96
cropping an image to a certain size or taking similar sized croppings from
various images (as I need to do.)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20012 a95241bf-73f2-0310-859d-f6bbb57e9c96
process group. This fixes bug #996.
* As a result, the process group stuff and wait_for_child() got much simpler;
get_death_entry() and update_wait_for_any() could go away completely.
* If a team goes away, all of its children are now "reparented" to the kernel team,
instead of the team's parent - this follows common implementations (and POSIX if
I understand it correctly), but not BeOS anymore. The OpenGroup Base says this
about this topic: "If a parent process terminates without waiting for all of its
child processes to terminate, the remaining child processes shall be assigned a
new parent process ID corresponding to an implementation-defined system process."
* We wait too long in wait_test_4 which at least puts us on par with Linux; see
comment in _user_setpgid().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20010 a95241bf-73f2-0310-859d-f6bbb57e9c96
broken (see bug #996), but less broken than Be's.
Also the Linux implementation is not perfect, as test 4 reveals: it waits for a
child with a certain process group, even if there is no child around anymore (because
the last child changed its process group. However, it will still return (and report
the correct error code) once this child exits.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20009 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed comment, as Haiku now behaves properly at least for most cases :-)
* Style guide update.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20007 a95241bf-73f2-0310-859d-f6bbb57e9c96
I'm considered splashing it up a bit by adding parameters for colors, etc, but
this will make a good baseline.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20005 a95241bf-73f2-0310-859d-f6bbb57e9c96
So the mechanism with the global variable did not work for R5 what caused two USB stacks and host controller drivers to be active concurrently which resulted in completely unpredictable results.
This kind-of-inelegant fix was all I could come up with, if someone has a better idea please send it this way.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20003 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Fixed some formatting in the recently added resizing code.
- Changed the operation name for rotating counterclockwise to use that name
instead of anticlockwise. This makes the code consistent with the GUI.
- Reformatted the constants header to use an enum. Also removed the empty
constants cpp file.
- The QuitRequested handler in the app did not ask the windows to close, which
could cause modified images to be closed without prompting the user. Now it
does, which makes ShowImage more user friendly.
Changes to the image view:
- Added a member for keeping track of the type of image. This is mostly used in
properly updating the window's status bar when the image is changed (flipped,
rotated, etc.) This removes some hacky code I added before :)
- Removed the status parameter in the Notify method since it was only used for
the above image type status updating.
- Removed a redundant if in the mouse up handler.
- The key down handlers for moving to the next and previous image did not
properly prompt the user if the image had changed. I fixed this by sending a
message to the window where the prompting code resides. When adding this I
also created a few helper methods for sending messages to the window, which
removed some (small) repeated code through-out the class.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19994 a95241bf-73f2-0310-859d-f6bbb57e9c96
ECHILD in case it doesn't. This fixes bug #995.
* Added a TODO item for solving bug #996.
* wait_for_child() did not release the team lock and restore interrupts in case
the child you wanted to wait for didn't exist...
* with child > 0, wait_for_child() will now check if its really a child of yours,
and not just in the same process group.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19993 a95241bf-73f2-0310-859d-f6bbb57e9c96
2048 bytes. This should fix bugs #993 and #997.
On BeOS R5 asking for 2 bytes too much wasn't a problem, as we
only need the first page_entry, and it didn't return any Error.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19992 a95241bf-73f2-0310-859d-f6bbb57e9c96
crashes at a later time. I observed one error at 8033a802, but the address
was allocated by the driver and should have been fully locked.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19988 a95241bf-73f2-0310-859d-f6bbb57e9c96
wait() should return with an error when the process has no children
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19983 a95241bf-73f2-0310-859d-f6bbb57e9c96
Tested with VMware Player 1.0.3 on linux and works.
Can also be used to create a haiku.vmdk file from an existing haiku.image file:
rm haiku.vmdk
generated/objects/linux/x86/release/tools/vmdkheader/vmdkheader -h 64k -i100M haiku.vmdk
cat generated/haiku.image >>haiku.vmdk
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19980 a95241bf-73f2-0310-859d-f6bbb57e9c96
feel free to change that ;-)
* Cleaned up existing headers.
* Coding style guide update to BBufferIO (renamed m_* members to f*).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19972 a95241bf-73f2-0310-859d-f6bbb57e9c96
with PostMessage() in case the message queue is full.
Some notes:
* for synchronous replies, we don't use this mechanism yet, but it could be
extended to do that as well.
* the code looks so complicated because we need a way to access the looper's
queue without locking it (to prevent deadlocks); like Dano's solution, I've
abused BTokenSpace to store a BDirectMessageTarget with a BHandler.
* we also need to decouple the lifetime of a looper's queue from its target,
as we cannot lock the looper, and therefore, can't guarantee it stays valid
as long as we're accessing it outside of BLooper.
* init_clipboard() now needs to be done after the global constructors have
been called - since sending messages now needs gDefaultTokens to be initialized.
Since this is done per image, it shouldn't cause any troubles, though.
* some minor cleanup, removed unused _msg_cache_cleanup_() and friends.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19968 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Got rid of unused BLooper members
* renamed fTaskID to fThread
* Removed private and deprecated AddLooper()/RemoveLooper()/... stuff; BLooper is now
directly calling BLooperList methods.
* Got rid of extensive and useless comments
* Made a few TODOs more clear
* Merged InitData() and InitData(...) to _InitData(...)
* BLooper::Team() now uses BPrivate::current_team(), sTeamID is gone now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19966 a95241bf-73f2-0310-859d-f6bbb57e9c96
