how everything currently worked. (Packet peaking was only done once in Init().)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31423 a95241bf-73f2-0310-859d-f6bbb57e9c96
container formats we support. I hope I have turned on only those that don't
have an implementation already (did we support ASF already?). I mostly tested
with AVI and that works reasonably well, but I only tested raw audio so far.
However, the backend for Marcus' avi_reader is much nicer than FFmpeg, so I
think it should stay and have disabled the support for AVI in AVFormatReader.
A big disappointment is that MPG containers only give scrambled video. It may
be a problem of the AVCodecDecoder, but I am not so sure. After all, it works
fine for other container formats. If I am not mistaken, VLC also does not use
the mpeg demuxer from FFmpeg. :-\ On top of that, libavformat detects the
time_base and stream duration wrongly for one of my test MPGs.
As for the implementation: Although seeking in libavformat happens for an
individual stream, in reality, the packets for all other streams need to be
flushed (that's also what happens in the libavformat tutorials I've seen).
Since our MediaKit API allows to seek tracks indivually, this is of course
a no-go, since then all other tracks would be out of sync. My solution is to
simply open the demuxer once for each stream and then completely ignore the
packets of the respective other streams. This also works around the problem
that libavformat is unable to provide packets by stream, requiring the
API user to queue the packets that he needs not now, but later for other
streams. It also means we have to no memory copies, since we can directly
use the packet buffer until the next call to GetNextChunk().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31421 a95241bf-73f2-0310-859d-f6bbb57e9c96
Re-use the kernel emulation of the FS shell to implement a FUSE module
for BFS. In theory, it could use any Haiku file system implementation
just like the FS shell itself, but currently only the BFS code supports
being compiled as an FS shell module. The build target is <build>bfs_fuse
On Ubuntu, you would do this:
sudo apt-get install libfuse-dev
jam \<build\>bfs_fuse
mkdir path/to/moundPoint
path/to/bfs_fuse /dev/sdaX path/to/mountPoint
And that will mount your BFS volume at /dev/sdaX
read/write. As this is new code, you should be careful with your
data and expect potential data loss. Not that I don't trust Raghu's
code, but a warning is always better with such things. So far, my
tests have been successful and it is great to finally have write
support for BFS in Linux! Thanks a lot, Raghu, for your great work!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31409 a95241bf-73f2-0310-859d-f6bbb57e9c96
seemed odd to me. The default settings made it feel too slow in coming up, and
even the fastest settings still felt awkward. So after some trial and error I
came up with a reasonable default that feels nice to me.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31407 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved stuff from testing in Sniff() into class members.
* Added function to gfx_utils() that converts an FFmpeg pix_fmt to color_space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31402 a95241bf-73f2-0310-859d-f6bbb57e9c96
happens after the tokens have been declared - this fixes#3137 for good
(without ftpcmd.y depending on itself)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31401 a95241bf-73f2-0310-859d-f6bbb57e9c96
the function is actually inlined, which we already checked for anyway. Now the
source location info should be retrieved correctly for all functions, even if
if we get potential duplicates for non-inlined functions. This has to be
dealt with differently, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31400 a95241bf-73f2-0310-859d-f6bbb57e9c96
* GetDeclarationLocation():
- Don't fail already when the entry itself doesn't support a declaration
location, since that fails for inlined functions.
- Follow abstract origin and specification, even if they don't have a have
a declaration location. The latter doesn't matter in this case, but we
failed erroneously, if the abstract origin had a specification which in
turn had the declaration location info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31399 a95241bf-73f2-0310-859d-f6bbb57e9c96
only file names. Changed the FileManager::Get*File() method versions taking
directory path and file name to also accept relative file paths. They just join
the paths and use the single-argument versions, which now does all the work.
Fixes finding source files for which a relative path is given in .debug_line.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31394 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added DebuggerInterface::GetSymbolInfo().
* Implementing stopping the thread in main() when the debugger started the
debugged program.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31393 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Got rid of superfluous SetTeam().
- Aded SetThread() to select a thread.
* TeamWindow: When a thread hits a debug event and no thread is selected or
the selected thread is running, select the stopped thread and switch to the
"Threads" tab view.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31390 a95241bf-73f2-0310-859d-f6bbb57e9c96
* BMenuWindow no longer uses a fixed scroll step - instead, the menu sets it
to the height of its first item.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31389 a95241bf-73f2-0310-859d-f6bbb57e9c96
to happen when an actual error occured.
* The "set frame" property resized the view incorrectly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31388 a95241bf-73f2-0310-859d-f6bbb57e9c96
attributes, but apparently those aren't generated by gcc 2.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31385 a95241bf-73f2-0310-859d-f6bbb57e9c96
to int32&. The DWARF indices are one-based with 0 as invalid/no value, but we
subtract one to get real indices and -1 as special value.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31384 a95241bf-73f2-0310-859d-f6bbb57e9c96
- DwarfUtils::GetDeclarationLocation(): Line/column numbers are one-based.
- Added line number program interpretation (LineNumberProgram).
* FunctionDebugInfo: Return the source file (LocatableFile) instead of the
file name.
* FileManager/LocatableEntry: Fixed handling when a LocatableEntry is
unreferenced. There was a race condition before, since an unreferenced entry
could be referenced and unreferenced again before removing it from the hash
table, which could lead to double deletion. Now we never reuse an unreferenced
entry and just remove it from the hash table when encountering one.
* FileManager/SourceFile: Added class SourceFile which loads a source file from
disk and slices it into lines. Managed by FileManager.
* Added class FileSourceCode, a SourceCode implementation using a SourceFile as
line provider. The statement management works pretty much exactly as in
DissassembledCode.
* DwarfImageDebugInfo: Implemented LoadSourceCode for real. It creates a
FileSourceCode and uses the DWARF line number information for the statement
information. This basically gets the source level view going, though there
are still several problems -- stepping doesn't work perfectly yet, the source
isn't found for all functions, there's no handling of duplicate functions (no
idea why gcc generates them in the first place), etc.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31382 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The URLProtocol idea seems not to work out, so I removed that code, but
the other idea of setting up a ByteIOContext actually works, once I seek
back to the beginning of the stream after reading the initial probe buffer,
we may also offset the buffer pointer in the ByteIOContext to where we
have already read, but I am not sure of possible side effects of that.
We can now probe for the correct demuxer and detect streams.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31379 a95241bf-73f2-0310-859d-f6bbb57e9c96
fViewState didn't change, fTitleView wouldn't be reset and updated to the new column set. (unfortunately the column
state is managed separately from the rest of the view state). That would cause crashes for example when switching
to a directory with fewer columns and triggering a redraw of a column that shouldn't be there anymore.
Fixes#3710.
* TitleView::Reset didn't invalidate the view and would leave the old columns there until a redraw was
triggered externally.
* Minor cleanup
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31378 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Handle Hardware error event
- Add function to retrieve an string from a bluetooth error
- Styling
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31376 a95241bf-73f2-0310-859d-f6bbb57e9c96
uses those ugly bitmaps for the up/down buttons - while the updated drawing is
far from nice either, it at least fits our UI style a lot better.
* Fixed typo "seperator" -> "separator".
* Coding style cleanup (still some stuff left).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31374 a95241bf-73f2-0310-859d-f6bbb57e9c96
there is no timezone link yet. This also fixes the time jump when setting
the timezone for the first time.
* _ReadRTCSettings() will no longer write the defaults.
* _WriteRTCSettings() will now also make sure the settings directory exists.
* ZoneView::MessageReceived() will no longer post an kRTCUpdate message on
changes - no idea what that was for (and that also caused the time jump).
* Now uses localtime_r() instead of localtime() everywhere.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31372 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed time.c to time.cpp.
* set_timezone() now uses localtime_r() instead of localtime(), and will also
no longer fail in case there was no timezone symlink before.
* Cleaned up OS.h header.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31371 a95241bf-73f2-0310-859d-f6bbb57e9c96
in case one just want to get or set the timezone.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31370 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added StringUtils with string hash functions.
* Added Locatable{Entry,File,Directory} and FileManager classes to manage the
mapping from debug info/target file names to local file names.
* Image does now have a LocatableFile referring to the image's shared object
file. Added listening to location changes of these files to TeamDebugger. No
action is taken yet (should trigger reloading the debug info).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31368 a95241bf-73f2-0310-859d-f6bbb57e9c96
the old names still exist as deprecated aliases for the time being.
* Introduced hooks FirstReferenceAcquired() and LastReferenceReleased(). Besides
added flexibility this also makes the deleteWhenUnreferenced constructor
parameter and the fDeleteWhenUnreferenced attribute superfluous, since the
"don't delete" behavior can be obtained by overriding LastReferenceReleased().
Parameter and attribute will be removed eventually.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31367 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Turn off tracing in the AVCodecDecoder which I accidentally turned on in
a previous commit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31366 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed inclusion of internal.h from libavcodec.h, it's not there in the
plain FFmpeg 0.5 version of the file.
The last item fixes the GCC2 build, at least AFAICT.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31364 a95241bf-73f2-0310-859d-f6bbb57e9c96
