Now that it is not used anywhere in the source tree following
previous commits.
Change-Id: Id2fc417a0658d09148e99587c613a928f1fbe4c2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4611
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
It is not present in BeOS R5 and it just call unload_driver_settings.
Replace delete_driver_settings usages with unload_driver_settings.
Keep the symbol on x86 for binary compatibility.
Change-Id: I1382710e3a4cb5c65d1249ea0e5880891e6800e4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3485
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
should help with bug #16929, untested
Change-Id: Ia7b9b6cc8e84e2377d79c0edd1c278cdf74d869b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3891
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
On sparc, the minimal page size we can use is 8K. Since B_PAGE_SIZE and
PAGESIZE defines were hardcoded to 4K, this resulted in a lot of
confusion in all code trying to manipulate pages.
- Remove cpu.h from headers/private/kernel/arch/*. It dates back from
NewOS and was not used anymore since our kernel uses B_PAGE_SIZE
(PAGE_SIZE was the only thing defined in this header).
- Add posix/arch/*/limits.h with the arch specific page size and include
it from the main limits.h.
- Adjust bios_ia32/debug.cpp which was the only place using the
PAGE_SIZE constant from the deleted headers.
- Change OS.h to define B_PAGE_SIZE to be the same as POSIX PAGESIZE.
- Define PAGESIZE in the build header if the host OS doesn't.
Change-Id: I8c3732cf952ea3c2f088aa16d216678fbf198b96
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3558
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Also remove the MINGW support, as it was far too incomplete.
This *should* work under case-sensitive NTFS, but instead,
it seems #14963 occurs. So perhaps there is a GCC bug
related to case-sensitive vs. case-insensitivity after all.
Also do some cleanup in private headers, I can't imagine why the build
libraries would need this function.
Change-Id: Ib08810b6efe4738dad596a735d741582a3781b28
Reviewed-on: https://review.haiku-os.org/c/1670
Reviewed-by: Ryan Leavengood <leavengood@gmail.com>
My upcoming changes to use our "futexes" instead of semaphores
will obviously not work on non-Haiku platforms, so we now
need a copy of this class in libbe_build.
The sparc openboot implementation can run executables in the a.out
format. We used to generate these using objcopy, but this does not work
anymore as binutils is deprecating a.out format support.
- Import elf2aout from FreeBSD
- Add some missing bits to our elf.h and have a copy of it in the build
headers so it can be used to build elf2aout for the host platform
(tested for Linux)
- Use it to generate the sparc haiku_loader
- Adjust the bootloader linker script to have two "program headers": one
that is not loadable and contains the ELF headers, and the second one
that is loadable and contains the actual code and data. Unlike
objcopy, elf2aout relies only on the program headers to know what to
put in its output file (sections are ignored), so this is required
otherwise we end up with the ELF header nested inside the a.out file,
and everything offset from the expected load address as a result.
Confirmed that this allows to build the loader and run it as far as
before, so I'm back to needing to implement some MMU support now.
FreeBSD commit: 7551d83c353e040b32c6ac205e577dbc5f2c8955
Change-Id: I90b48e578fa7f148aeddd8c5998fdddc5cfa73fa
Reviewed-on: https://review.haiku-os.org/c/1557
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
By default, all targets support the "haiku" platform, and we no longer
support building for BeOS, Dan0, Zeta, or other BeOS-compatible targets,
so this is no longer needed.
Also remove all references to the non-Haiku compatible platforms, and
change all BEOS_COMPATIBLE checks to HAIKU_COMPATIBLE. Removal of
all SetSubDirSupportedPlatformsBeOSCompatible invocations
will be in the next commit.
If this triggers, it means something is using the "build" errors while
the build system thinks it is not, which is always an error. Nothing
triggers this at present, but some subtle bugs in the build system
a while back would have been caught by this.
Use BStackOrHeapArray instead of using auto_ptr to array.
Change-Id: I171cb002829c36ec51ba7d1e387869263e2a40f2
Reviewed-on: https://review.haiku-os.org/745
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
This doesn't fully work yet (the FS code in libroot_build
needs to be adapted, as some of the symlink-related calls
are not available on MinGW), but it gets much further than
the "Cygwin" target did.
These have been broken for a long time. Some Cygwin changes that
are relevant on MinGW are kept here, but users on Windows who
want to build Haiku should probably use WSL at this point.
However, now that we are using relative paths and don't need
to worry about drive path kludges, it's actually possible to
get some host tools built on MinGW. Changes for that coming.
This was done using macros before, which isn't the way we have things set up.
In theory that method should work, however if not all consumers include the
libroot_build headers properly, then it breaks in subtle but confusing ways,
which is not what we want at all.
Thanks to Jessica for advice.
Change-Id: Idd45df5547daecf8239932957088da03ddfccf87
John's revert of my removal commit dragged back a bunch of cygwin/sunos
cruft, as well as re-adding RegExp.cpp to the host libshared, that we don't
need.
Instead, remove this and add libgnuregex_build to just the tools/keymap
link alongside the FreeBSD gnuregex case.
As it turns out, using the xattr emulation layer plus "libgnu"
causes some strange mixups at package build time, and so packages
built with it were winding up with no attributes at all.
So I've just bitten the bullet and written a full passthrough layer
to the system attributes. Verified using a full build of haiku.hpkg
this time ... after a lot of painful debugging of symlink mixups.
Hopefully I am finally rid of this plague...
To quote jscipione (from 95e8362c52),
"Let me tell you a story about a bug" -- though this tale spans a much
lesser time than that one did.
In 5e19679ea3, I enabled libroot_build for
Haiku, instead of using the system libroot as we had before. There were
a number of bugs introduced along with this that I hadn't fixed (and there
may be more after this), but most of the obvious ones (crashes on x86_64...)
were fixed shortly enough.
Attribute usage, though, was a different story. Unlike most of the POSIX
calls in libroot, which were aliasing system functions no matter what the
platform, the attribute calls were not, as they are specific to Haiku.
Initially I had completely forgot about them, and it wasn't until a few days
later when I noticed that I had an "attributes" directory in my generated
that I realized that the "generic" attribute layer was being used on Haiku.
I attempted a fix for this in 5e19679ea3,
thinking that would clear the problem up, but I didn't actually run a test
beyond seeing that my BuildConfig had been updated properly. In fact,
BuildSetup was hard-wired to not even pass that definition through on
Haiku, and so that commit had in effect caused nothing.
My initial "fix" of just changing BuildSetup then caused a build failure,
as while libroot_build itself compiled, it ran into errors whenever attributes
were used, because in letting the real libroot's attribute calls shine
through, I had bypassed libroot_build's FD emulation/shim layer.
Then I tried and failed at three separate attempts to solve this with code:
- a version of the "fs_attr_...h" interface for Haiku. This proved possible
in theory, but in practice I would need to reimplement a lot of attribute
handling code in it, because all I had access to from there was syscalls.
- a version of "fs_attr_untyped" that bypassed its reimplementations of
the "fs*attr" functions for the libroot ones, only using the FD shim layer.
This proved possibly not even theoretically possible because it would have
caused preprocessor hell in some of the build headers, and also assumptions
about how attributes are read were totally different.
- a completely new "fs_attr_haiku" that was a completely new interface to
the fs*attr functions. This proved practically impossible because of the
need to include structures from the system libroot to call out to readdir,
etc. that attempts to solve would also have caused preprocessor hell.
Then I realized that the Linux xattr emulation library, which I'd used
as a reference when attempting the first solution, was shipped by default
as a system library in all builds of Haiku ... and so I could just tell
fs_attr_untyped to use the Linux xattr handler, and then link against libgnu.
So that is how I arrived at this strange and decidedly unorthodox solution
to a problem of my own creation.
It was needed on macOS for a time when BUrl used regexes for parsing.
Now it does not, and so we can remove libshared's RegExp from build
libshared, and thus also libgnuregex.
I didn't notice this in the previous commit because apparently GCC2
just links against libroot's versions of them. On GCC5, however,
the version from libroot_build was used even for calls from libroot itself,
which led to infinite loops and then stack overflows.
So instead we must have the "syscall" functions in libroot_build shadow
the real ones by being named differently, which I did by changing their
prefix from "_kern" to "_kernbuild" via preprocessor macros.
Since the build syscalls.h is now substantially different than the non-
build one (and has not been synchronized in nearly a decade anyway),
I've just stripped out all the syscall defns except for the ones actually used
in the build.
Thanks to kallisti5 for helping me debug and test.
Previously we just used the system libroot, which of course meant
that when libroot's ABI changed, the build broke. Now we use the full
libroot_build that we do on non-Haiku platforms. The logic for "BeOS-compatible
but not Haiku" does not really apply anymore, so it has been gutted where
appropriate (and libhaikucompat has been decoupled from the build.)
The only caveat here is the change to Errors.h -- we really should be using
the system's one where I included the one from the tree, but for whatever
reason, GCC2 refused to handle the #include_next properly.
Fixes the build breakage of Haiku-on-Haiku by my prior commits (sorry).
Technically a "hack" (but then again most of the config/build stuff is);
as we need to use the system's config/types.h in order to get stdint
definitions and the like.
Previously there was a config_build directory which allowed the existence
of two types.h -- the system one, and the headers/build one, but seeing
as we only need this to provide Haiku-specific core types on other platforms,
using the system's one should be fine.
Our core type definitions have not changed in some time (and it's unclear
when they would change aside from potential new platforms), breakage of the
Haiku-on-Haiku build due to this should not happen often (if ever.)
Now that we do not target BeOS and also do not include the main headers
directory when building "build" binaries, we can drop the separate
config_build directory and thus also the separate BeBuild.h, and just
..-include the regular one.
The build BeBuild.h defined empty _IMPEXP_ROOT and _IMPEXP_BE preprocessor
macros that the regular one does not; so I also re-synchronized
headers which used these as needed.
This file was apparenly based off the BeOS one (as is evidenced
by the "Be Incorporated" copyright ... which is problematic.)
Now it's directly based off of the non-build one.
Thus, BeOS compatibility is preserved (and there is no risk of
breaking GCC5<->GCC2 interoperation on hybrid builds.)
This commit only makes the actual change, the build fixes are
in the next commit.
