Change-Id: I90a9440898994459f8d6de922a3f363fbeddaaf4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2974
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* boot.scr was growing past Jam MAXLINE and was causing segfaults
* Break out to tree, data/boot could be used for other arches
* boot.scr is getting a bit complex, but supports the old
u-boot haiku_loader, as well as u-boot starting our EFI loader.
Change-Id: I93a3167ab0bc78747c1d70fedd08595e9ac89662
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2963
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Stub out makebootable like on u-boot
* Place haiku_loader.efi at EFI/BOOT/BOOTXXX.EFI
* Generate boot.scr for u-boot + EFI
* haiku-mmc.image now attempts to auto-boot in qemu-system-arm
* Same code paths should roughly apply for arm64,riscv,etc
Change-Id: I563ebd77422d9e5dfcfeeedadcbc60471e8a57f4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2938
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* This should 'fix' the arm build
* No longer parse FDT in bootloader, just pass ptr.
* The EFI loader doesn't load yet on arm
* It compiles though. Ship it!
Change-Id: I7c8ce588298dfaf4fba8054c6b6d9a92733b5943
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2903
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: Ibce15f70e20ea010937edb0a297d220c4e5a7af2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2817
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This is the partitioning system used on sparc machines.
Confirmed working with a Solaris install iso image.
Added to the haiku package for sparc and to haiku_extras for other
architectures.
Fixes#15638
Change-Id: I0584bef5e6a66eff9a33eb6675d5533cc9a45d1e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2709
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
This pulls in the final translations for applications for R1/beta2,
and also the new HaikuWebKit.
Change-Id: I2bfb8933dcf35239f6962f8bee2dea507dec6fd5
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2869
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Each TCPEndpoint has two BufferQueue members, one for the send queue
and one for the receive queue.
If DEBUG_BUFFER_QUEUE is enabled, then most methods of BufferQueue
call BufferQueue::Verify(), sometimes twice. This member function
performs some sanity checking which requires iterating through every
net_buffer in the queue.
Disabling this in a debug build improved throughput by a factor of 5x
over the loopback interface on my laptop. Using iperf the measured
throughput went from 900Mbps to around 4.8Gbps.
This patch turns this sanity checking off for release builds.
* Rename DEBUG_BUFFER_QUEUE to DEBUG_TCP_BUFFER_QUEUE
* Change the default in BufferQueue.h to disabled
* Set DEBUG_TCP_BUFFER_QUEUE to KDEBUG_LEVEL_2 in
kernel_debug_config.h
Change-Id: I262dac5d7e2889d2942bbdcf6b667cc0cbafa4c8
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2780
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The @image build is not used anymore and doesn't work. Use @nightly-raw
or @nightly-anyboot instead. The new method of release type/image type
configuration of profiles is more flexible and allows to manage the
various configurations a lot more easily for us. But the old profiles
were never formally deprecated.
Fixes#15963
Change-Id: I1c72f0e77bfbcda10502476e595f120280e8c7a4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2625
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
It does have a performance impact (as it serializes all VMCache
creations), and it is not that useful, so move it to KDEBUG_LEVEL_2
so that the beta releases (on KDEBUG_LEVEL_1) are not affected
by it.
(The nightlies are on KDEBUG_LEVEL_2, so this will not affect
them.)
Change-Id: Iab35d58f9d210651e3fd9027b75ea27a7a6928e5
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2612
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Also remove the MINGW support, as it was far too incomplete.
This *should* work under case-sensitive NTFS, but instead,
it seems #14963 occurs. So perhaps there is a GCC bug
related to case-sensitive vs. case-insensitivity after all.
for Development: automake and autoconf require perl
for DevelopmentMin: makefile_engine requires make and mkdepend
Change-Id: Ica2bace17a233e2e589e139208e468870b1cc84e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2507
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Notable changes:
* jpeg replaced with libjpeg_turbo across the board.
* man replaced with mandoc.
* ilmbase merged into openexr.
* gnutls no longer needed in this set.
A few other packages unused in the local scripts were
also removed. Build fixes are in following commits.
Previously, all packages on the image, both activated and unactivated,
were in $systemPackages, so if a package actually in /system/packages
had a dependency in the Installer optional package area, the dependency
checking would see no problem but the generated image would be broken.
Now, packages going into /system/packages are treated separately
from those going elsewhere, and error checks added so the above
condition will not occur.
(I ran into this while working on the build-package upgrade
in the following commits.)
Should constitute a minor performance gain, with no functional change
(the kernel ELF loader does not do any semantic interposition; or
any interposition for that matter.)
Activating all these packages on live boot (especially live DVD where we
also have the write overlay eating up RAM) significantly increases
memory requirements for running Haiku, to the point that Installer may
fail to run. Move them outside the packages/ directory so they are not
activated.
Installer already skips the _sources_ directory when installing, and
lists the contents of _packages_ with checkbox to decide what to include
in the install (they are put in system/packages on the target disk).
Fix from previous version: the Haiku package was installed to /system
instead of /system/packages.
Fixes#15621.
Activating all these packages on live boot (especially live DVD where we
also have the write overlay eating up RAM) significantly increases
memory requirements for running Haiku, to the point that Installer may
fail to run. Move them outside the packages/ directory so they are not
activated.
Installer already skips the _sources_ directory when installing, and
lists the contents of _packages_ with checkbox to decide what to include
in the install (they are put in system/packages on the target disk).
Fixes#15621.
Change-Id: Ibfac14c43dbe708316a0d82ca1c9d49b5cba2aef
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2157
Reviewed-by: Sergei Reznikov <diver@gelios.net>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: I23db3cbb57fea1f9346db9477f72bcc164794926
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2282
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* This is the bulk of the work. Anything else should be
minor cleanups and tweaking.
* riscv64 isn't a viable EFI platform yet.. just acting
as a stand-in to test a non-x86 EFI haiku_loader
Change-Id: Ib03de81e2b562e693987b86d7b4318209fb1c792
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2256
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Change-Id: Idc50cfee16db5f7c0dbea625a7739ad42b2d7bf0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2249
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* "xorriso doesn't support much of the mkisofs options"
* Dropping the hfs map made our bootloader no-longer get
mapped as :tbxi which means qemu + Apple devices refused
to boot it.
* Switch to genisoimage which can generate the correct image.
(xorriso -as genisoimage doesn't work either)
Change-Id: Id71b97796f5004f6ddf6244644c51a5787f9bf8e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2241
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
And remove Mouse, Keyboard and Touchpad.
Userguide and localizations will need to be updated.
Change-Id: I4543b2b63367cd13562c542610bad34b5934b103
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2210
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
