* Made the TimeZoneView less error prone, and also actually use Haiku code (the
previous check didn't work since it used #if, not #ifdef).
* Also took the liberty to rename our boot loader to haiku_loader, since I had
to update the nasm binary anyway. Updated the assembly sources to nasm 2.0.
* I haven't found where the synth location in the MIDI code is specified,
though.
* Also, NetBootArchive, and FloppyBootImage haven't been updated yet. Will do
so next.
* Some optional packages still put their license to beos/etc/licenses. I didn't
update them yet, as we'll probably do so anyway at some point. Also, I think
we might want to introduce a common/data/licenses instead for those.
* If you encounter any problems, please tell!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29876 a95241bf-73f2-0310-859d-f6bbb57e9c96
--alternative-gcc-output-dir configure option has been specified,
HAIKU_ADD_ALTERNATIVE_GCC_LIBS is set by default. One has to explicitely
unset it in UserBuildConfig to avoid building the alternative gcc libs.
* Adjusted documentation accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29607 a95241bf-73f2-0310-859d-f6bbb57e9c96
4). One has to have a (fully configured) "generated" directory for the
alternative gcc and specify it using the new option
"--alternative-gcc-output-dir" when configuring the main build.
Additionally the build variable HAIKU_ADD_ALTERNATIVE_GCC_LIBS has to be
set to "1".
If that has been done, when building the image a sub-jam is invoked that
generates the alternative libs and zips them. The main-jam unzips them
into the correct directory in the image. Note that the JAM build
variable has to be set when using a jam executable not invoked by "jam".
Tested with gcc 2 NetPositive, Pe, and FireFox under gcc 4 Haiku, and
with a few of the standard gcc 4 Haiku apps under gcc 2 Haiku. Seems to
work fine so far.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25536 a95241bf-73f2-0310-859d-f6bbb57e9c96
directory to the image. It supports exclude patterns.
* Changed Add{Source,Header}DirectoryToHaikuImage to use the
CopyDirectoryToHaikuImage rule. The special handling in the
build_haiku_image script is gone now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24586 a95241bf-73f2-0310-859d-f6bbb57e9c96
uncommented the meaty lines again. Added one or two more explaining
sentences.
* Created a concise UserBuildConfig.sample with very few comments and
only the most interesting (commented out) example lines for those
people who don't read the UserBuildConfig.ReadMe.
I hope everyone can live with this solution.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24350 a95241bf-73f2-0310-859d-f6bbb57e9c96
works fine without those, the keymap file will be generated.
* Supplied the removed lines as example in UserBuildConfig.sample for how
to supply these settings during image generation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24298 a95241bf-73f2-0310-859d-f6bbb57e9c96
UserBuildConfig the user just have to uncomment whatever he/she wants. This
is easier than commenting out almost everything.
- Added entries for Pe and Links optional packages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24240 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added explicit example for enabling debugging for a subtree.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23818 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The POSIX test suite is copied to the image when the jam variable
HAIKU_ADD_POSIX_TEST_SUITE_TO_IMAGE is defined (cf. UserBuildConfig.sample).
* Added difftime and fork tests to the test suite run script.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22907 a95241bf-73f2-0310-859d-f6bbb57e9c96
already exist, it won't be zeroed out. The image will still be
initialized with BFS, though. Handy for installing Haiku on a partition.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22397 a95241bf-73f2-0310-859d-f6bbb57e9c96
HaikuImage and enabled individually using the
AddOptionalHaikuImagePackages rule or all at once by setting
HAIKU_ADD_ALL_OPTIONAL_PACKAGES. In principle an optional package can
be any kind of addition to the Haiku image, but usually a zip file will
be downloaded from somewhere and unzipped onto the image. I've added a
WonderBrush package as an example.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22184 a95241bf-73f2-0310-859d-f6bbb57e9c96
to do that is UnzipArchiveToHaikuImage. Cf. UserBuildConfig.sample for
a usage example.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22173 a95241bf-73f2-0310-859d-f6bbb57e9c96
work on arbitrary "containers". The image rules are just
specializations.
* Added rules, a definition file (build/jam/NetBootArchive), and a shell
script for creating a gzipped tar archive containing kernel and modules
required for network booting (the contents may need some fine-tuning).
ATM it can be built via the haiku-netboot-archive pseudo target. It is
generated in the output directory (e.g. "generated").
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21591 a95241bf-73f2-0310-859d-f6bbb57e9c96
with image files. E.g.
jam -q update-image libbe.so kernel_x86
will only build libbe.so and the kernel (if necessary) and copy them
onto the already existing Haiku image. The MIME DB will not be
reinstalled, and only those source directories will be copied for which
the AddSourceDirectoryToHaikuImage rule is given a second argument
(e.g. "1"). The image will otherwise remain unchanged.
The "update-vmware-image" and "update-install" work similarly for the
VMWare image and the directory installation respectively. Note that, due
to the way the VMWare image is created (prepending a header to the
standard image), the file itself is fully rebuilt, i.e. changes made
during the emulation will be lost after updating the VMWare image.
The feature requires Haiku's jam. With other jam versions a similar
effect can be reached by accordingly setting the HAIKU_IMAGE_UPDATE_ONLY
and HAIKU_INCLUDE_IN_IMAGE in the UserBuildConfig file.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20602 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added rule AddSourceDirectoryToHaikuImage to copy source directories
onto the image. They will be placed in /boot/home/HaikuSource/...
according to their relative path. This should make it a bit more
comfortable to use gdb as a source level debugger. Alas, the
directories have to be made known to gdb individually (with the
"directory" command). I guess we should update to 6.6...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20415 a95241bf-73f2-0310-859d-f6bbb57e9c96
turn off the inclusion of src/Jamfile, and the rule DeferredSubInclude to
include a subdirectory in UserBuildConfig. Together they allow a developer
working on a subproject to reduce jam's parsing time when only building the
subproject. Relevant mostly on BeOS; on Linux jam is pretty fast anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20321 a95241bf-73f2-0310-859d-f6bbb57e9c96
vmdkheader tool. New pseudo target haiku-vmware-image to build it.
Image default name is "haiku.vmdk", adjustable via the
HAIKU_VMWARE_IMAGE_NAME variable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19982 a95241bf-73f2-0310-859d-f6bbb57e9c96
