* IsPackageAvailable, FetchPackage: Add flags parameter. The only
flag supported ATM is nameResolved, indicating that the specified
package name does not need to be resolved with respect to a secondary
architecture anymore.
* Add build profile action "build-package-list". As an argument the
file to which the list of all packages needed for the image is
written. The rule BuildHaikuImagePackageList implements the action.
* BuildBootstrapRepositoryConfig: Does now require the variable
HAIKU_REPOSITORY_TREE_PATH to be set on the config file target instead
of hard-coding the path. Allows reuse of the actions.
* Add rules BuildHaikuPortsSourcePackageDirectory and
BuildHaikuPortsRepositoryConfig. The former builds all HaikuPorts
source packages needed to build the packages for an alpha image. The
latter generates a haikuports.conf file for use on the bootstrap
Haiku.
* HaikuImageBootstrap: Add directory /boot/home/haikuports which
contains a subdirectory with the source packages and a
haikuports.conf.
The Haiku bootstrap image is now built with (hopefully) all required
primary and secondary architecture packages. The runtime loader is still
resisting our wish to run secondary architecture programs, though.
For the secondary architecture the same specified package name means a
different package, so we need to use the mapped name IsPackageAvailable
returns.
* Add rule FSplitPackageName. It splits a package name into port name
and package suffix.
* FSetConditionsHold: Rename to FConditionsHold and replace the set
parameter by a predicate rule parameter, thus adding more flexibility.
* FIsBuildFeatureEnabled: Use the faster check.
* Add rule FQualifiedBuildFeatureName. Given a build feature name, it
prepends the current packaging architecture to yield a qualified
feature name. Is used by the other build feature rules so that the
same build feature can be configured differently for each arch.
* ExtractBuildFeatureArchives: The supplied list is now filtered via
FFilterByBuildFeatures, allowing for build feature conditions in the
list.
* Add rule InitArchitectureBuildFeatures. It is called early for each
configured architecture, setting up some basic build features for it.
"primary" is set for the primary architecture and a "secondary_<arch>"
is set for each secondary architecture.
* BuildFeatures: Add secondary architecture support: Use the correct
paths for libraries and headers (subdir for secondary architecture)
and configure the icu and zlib sources only for the primary
architecture.
* BootstrapPackageRepository: The package lists are now filtered via
FFilterByBuildFeatures, allowing for build feature conditions in the
lists.
* IsPackageAvailable, FetchPackage: Add secondary architecture support.
* HaikuPortsCross/x86_gcc2: Add icu and zlib x86 secondary packages.
The second stage Haiku cross devel package for the secondary
architecture can now be built.
Pass --enable-hybrid-secondary to gcc's configure when building it as
a secondary compiler. Doesn't make a difference for building Haiku
itself, but makes it easier to match the Haiku cross devel package with
the compiler when building bootstrap packages with haikuporter.
gcc 4 only ATM.
* Libraries for a secondary architectures must be placed in a respective
subdir.
* Add a suffix to the package name when building for a secondary
architecture. Looks a bit weird
("haiku_cross_devel_sysroot_x86_gcc_x86.hpkg"), but is consistent.
* All packaging architecture dependent variables do now have a
respective suffix and are set up for each configured packaging
architecture, save for the kernel and boot loader variables, which
are still only set up for the primary architecture.
For convenience TARGET_PACKAGING_ARCH, TARGET_ARCH, TARGET_LIBSUPC++,
and TARGET_LIBSTDC++ are set to the respective values for the primary
packaging architecture by default.
* Introduce a set of MultiArch* rules to help with building targets for
multiple packaging architectures. Generally the respective targets are
(additionally) gristed with the packaging architecture. For libraries
the additional grist is usually omitted for the primary architecture
(e.g. libroot.so and <x86>libroot.so for x86_gcc2/x86 hybrid), so that
Jamfiles for targets built only for the primary architecture don't
need to be changed.
* Add multi-arch build support for all targets needed for the stage 1
cross devel package as well as for libbe (untested).
The goal is to do hybrid builds in a single jam (instead of calling a
sub-jam to build parts with the secondary tool chain). This changeset
adds support to configure to prepare multiple tool chains.
configure:
* Merge option --build-cross-tools-gcc4 into --build-cross-tools. The
option does now always require a packaging architecture parameter,
i.e. x86_gcc2 for the legacy tool chain.
* Multiple occurrences of the --build-cross-tools and
--cross-tools-prefix options are allowed. The first one specifies the
primary tool chain, the subsequent ones the secondary tool chains.
* All architecture dependent jam variables are now suffixed with the
name of the packaging architecture. The new HAIKU_PACKAGING_ARCHS
contains the packaging architectures for the prepared tool chains. The
first element is for the primary tool chain.
* No longer generate a separate libgccObjects file. Just put the
respective variable into BuildConfig as well.
build_cross_tools[_gcc4]:
* Replace the <haiku output dir> parameter by a <install dir>
parameter. This allows to create different cross-tools directories.
They are simply suffixed by the packaging architecture.
Jamrules:
* For the moment map the variables for the primary tool chain to the
respective suffix-less variables, so that everything still works as
before.
The next step is to actually support the secondary tool chains in the
jam build system. This will require quite a bit more butchering, though.
* Don't handle the bootstrap case in the main Jamfile. Add all bootstrap
packages to the image in the profile definition. That's less
confusing, hopefully.
* Add the missing bootstrap packages (ncurses*, libtool_libltdl). The
would normally be added in build_haiku_image when the package
dependencies are resolved, but we don't do that for the bootstrap
image, since we intentionally leave some dependencies out (e.g. perl)
because they can be built.
* Add configure option --bootstrap which allows specifying the
haikuporter and HaikuPorts repository paths.
* Add rules for supporting a second repository type. The
PackageRepository rule is now private and RemotePackageRepository is
used for remote repositories. The new BootstrapPackageRepository rule
is for defining a bootstrap repository (there will probably be only
the HaikuPorts cross repository) whose packages can be built as needed
via haikuporter.
* Rename DownloadPackage to FetchPackage.
* Define repository HaikuPortsCross.
* HaikuCrossDevel package(s): There are now two sets of packages: A
"stage1" set with the same content as before and a final set
additionally containing the libraries libbe, libnetwork, libpackage.
Those are needed for building the libsolv bootstrap package while for
building them we need other bootstrap packages (ICU, libz).
This is basically all that's required to build a bootstrap Haiku
completely from sources, with a few caveats:
* There's no ICU bootstrap recipe yet (so one has to cheat and use the
prebuilt package ATM).
* Probably doesn't work on Haiku yet (tested on Linux only).
* A 32 bit environment must be used (otherwise building the gcc 2
bootstrap package fails).
* Building with multiple jobs doesn't work yet, since haikuporter uses
common directories for building different packages and there's no
explicit serialization yet.
* Haven't tested the resulting image save for booting it. So it probably
needs a bit more work before it can actually build the final
HaikuPorts packages.
DefaultBuildProfiles is now included earlier (right after BuildSetup).
This allows us to set HAIKU_BOOTSTRAP_BUILD earlier, so it can be used
for the repository selection. The actual build profile definitions,
which cannot be done that early, live in the rule
DefineDefaultBuildProfiles, which is invoked where the file was
previously included.
Add support for placeholders in the attribute values. The values of the
currently supported placeholders depend on the package file name
(package version, actual package and port name, etc.).
Also, pre-process all package infos (not only the generic ones) and
define the macro HAIKU_BOOTSTRAP_BUILD, if building a package for a
bootstrap image.
Copy:
* packages: Haiku -> HaikuBootstrap
* images: HaikuImage -> HaikuImageBootstrap
... and remove some unncessary content.
Setting the jam variable HAIKU_BOOTSTRAP_BUILD enables using the
bootstrap files.
* Under the base URL there are supposed to be the repository files and a
subdirectory "packages".
* Fix the repository URL related confusion introduced earlier. The URL
in
the repository info (and thus in the repository file) is supposed to
be the base URL for the repository. It is not a (potentially)
different base URL for the package files. Package and repository
files were supposed to live in the same directory. Now, by requiring
the package files to live in a subdirectory -- which can also be a
symlink -- we gain some flexibility.
The URL in the repository config is usually the same as the in the
repository info, unless it refers to a mirror site. This allows for
mirrors to copy the original repository verbatim.
* Remove the PackageURL rule and introduce a DownloadPackage rule
instead. The URL for a package file cannot be computed in the jam
parsing phase anymore, as it contains the hash value of the package
list.
* BRepositoryConfig: Add PackagesURL() for convenience.
The package kit actually requires the files "repo", "repo.info",
"repo.sha256" to be located under the repository base URL, so the
approach to name the repository file "repo-<hash>" doesn't work.
Now there's a directory "<hash>" which contains the files.
This commit moves the computation of the hash and downloading the
repository file from the build_haiku_image script to the jam build
system. The repo.info is also downloaded and a repository config file
is generated.
* Build libsolv and the dependency solver part of the package kit for
the build platform.
* Add build tool get_package_dependencies. Given a list of package files
and a list of repository files it determines the additional packages
that need to be retrieved from the repositories and prints their URLs.
* Add rules to work with external repositories in the build system
(build/jam/RepositoryRules):
- PackageRepository declares an external repository with all its
packages. The URL of the repository file isn't specified. It is
computed from a given base URL and the SHA256 hash of the list of
package files.
- GeneratedRepositoryPackageList generates a file containing the file
names of all packages in a repository.
- IsPackageAvailable returns whether a package is available in any
repository.
- PackageURL returns the URL for a package.
* Declare the HaikuPorts repository for x86_gcc2
(build/jam/repositories/HaikuPorts/x86_gcc2).
* Add rule AddHaikuImagePackages to add a package to the image and rule
IsHaikuImagePackageAdded to determine whether a package has been
added.
* OptionalPackages: Remove all entries that just downloaded and
installed an external package. AddHaikuImagePackages can be used
instead and is used in the remaining entries. Also move the remaining
optional package dependency declarations from
OptionalPackageDependencies here.
* ExtractBuildFeatureArchives: Instead of the URL parameter a package
name must be specified now. This allows to simplify BuildFeatures
significantly, since there's no dealing with URLs anymore. "if" out
the entries that aren't supported yet.
* build_haiku_image: For the packages installed in system and common
resolve their dependencies and download and install them as well.
* ExpanderSettings: Use a settings directory "expander" and rename
settings file to "settings".
* ExpanderRules: Read expander rules from "rules" files in the settings
directory, then from files in expander/rules subdirectories of the
installation location data directories, and finally add the built-in
rules. This allows packages to provide expander rules (as already
done by the p7zip package).
* OptionalPackages: Remove AddExpanderRuleToHaikuImage invocations.
* ImageRules: Remove Expander rule file related rules.
* Deskbar now uses ~/config/settings/deskbar/menu_entries for its menu,
falling back to /system/data/deskbar/menu_entries, when the former
doesn't exist. The latter always exists and is a virtual directory
merging the deskbar/menu subdirectories of ~/config/settings/ and
<any installation location>/data/. So, if a package provides a
deskbar menu symlink, it is added automatically when the package is
activated. The user can add own menu items by putting stuff into
~/config/settings/deskbar/menu/, only use their own organization by
symlinking it to menu_entries, or do fun stuff by making menu_entries
a customized virtual directory.
* HaikuImage: No longer create any deskbar menu symlinks in the user's
settings directory. Instead add them to the Haiku package.
* OptionalPackages: At least for the optional packages that do have
hpkgs, no longer create deskbar menu symlinks in the user's settings
directory.
* Move all Deskbar settings files to ~/config/settings/deskbar/ and
drop the "Deskbar_" prefix.
* at least for gcc2, we used to leave the 'os' subfolder in there,
which may have caused problems when Haiku's headers have changed
since the last time the compiler was built.
(cherry picked from commit 92bb2fb33e)
* force creation of a cross-compiler for both gcc2 and gcc4 when
building on Haiku (by suffixing the build and host machine with
'_buildhost')
(cherry picked from commit df69e209bb)
Conflicts:
build/scripts/build_cross_tools_gcc4
* at least for gcc2, we used to leave the 'os' subfolder in there,
which may have caused problems when Haiku's headers have changed
since the last time the compiler was built.
* Also make use of new build feature rules.
* Since the hacky long_jump_buffer field has been removed from the
jpeg_error_mgr struct in the new package, the structure is now
wrapped in the JPEGTranslator code to achieve the same behavior.
We have to use actual targets that cause the respective download and
extract the packages. Otherwise the build fails when the packages
haven't been extracted yet.
Missed that when adding the script. Therefore it would be created in the
current directory and when building multiple packages concurrently the
script would be overwritten.
The new configure option "--use-xattr-ref" enables an xattr assisted
variant of the generic attribute emulation. Instead of using the inode
ID of a node to identify its attribute directory, we use a reasonably
unique random 128 bit number, which we generate and attach as an
attribute to the node. This way, when a node changes its inode ID
(defragmentation?) or the inode ID of a removed node with a left-over
attribute directory is reused, attributes won't get mixed up.
The old method is still used for symlinks (since on Linux only
priviledged users can write attributes on symlinks), but those usually
only have a rather boring BEOS:TYPE attribute, so mix-ups wouldn't be
that problematic anyway.
* After examining MacOS toolbox roms, I think i've got
this nailed down. The MacOS Toolbox rom contains chrp
code at the top and binary code at the bottom.
* The Raw format for the chrp seemed to cause issues with the
OpenFirmware boot process on some systems. NetBSD uses a '-'
file type.
* The format of the chrp seems a lot more sensitive across machines
than described. Ensure our returns and spaces are even.
* Booting with the 'c' key is still working on my older OpenFirmware
machine with the chrp script. The bitmap logo is a half black, half
white box.
* I removed the &device; alias for now for troubleshooing. It also may
of been causing compatibility issues. More testing is needed.
* It seems like not all NewWorld OpenFirmware
versions support booting from CHRP scripts.
* Move Haiku elf bootloader into bootloader.b
type tbxi. As it is in the blessed directory
it is picked up by cd:,\\:tbxi
* Adjust bootinfo.txt to point to bootloader
&device; ensures that the image can be started
regardless of source media
* Adjust bootinfo.txt to use \\ as base. \\ is an
alias for the blessed folder on the boot media
* Rename ofboot.b to ofboot.chrp to avoid confusion
* Add .txt, .html to hfs.map to identify them properly
* The haiku-boot-cd-ppc.iso now boots on my G3 PowerBook
by holding the 'c' key at startup. The boot menu colors
are incorrect (white background) but it is a step in
the right direction.
* New chrp script. Blank icon for the moment, if someone
could figure out how to make a chrp icon that would be
neat.
* Tested working on qemu and real hardware. Need to test
on a more modern PowerPC Mac however.
* this package wraps the haiku_cross_devel package (i.e. it contains
that package in /develop/cross)
* the wrapper package is meant to be installed into the system
hierarchy, from where haikuporter will fetch the contained package
when needed
* add HAIKU_PACKAGING_ARCH, which is set to the target packaging
architecture
* introduce support for generic package infos, which are package infos
that are the same for all architectures, except for the declaration
of the package architecture itself
* move package info files underneath architecture-specific or generic
folder
* BuildHaikuPackage rule: Create the script that contains the extraction
commands.
* build_haiku_package: Add extractFile() function (stripped down version
from build_haiku_image).
In build_haiku_image the functionality was mainly used to extract the
optional packages, which is no longer done. We still need it e.g. for
the Wifi firmware packages that want to be extracted.
* Add new package haiku_loader.hpkg and move haiku_loader there. The
package is built without compression, so that the stage 1 boot loader
has a chance of loading it.
* Adjust the stage 1 boot loader to load the haiku_loader package and
relocate the boot loader code accordingly.
It allows to control the compression level used for package creation
and update. The default (9) is *very* slow, so developers may want to
use a smaller level during the regular development process to keep
turn-around times low.
* Switch bash, debugger, less, telnet[d] and top apps to use termcap
functionality provided by ncurses lib instead of GNU libtermcap.so;
* NetBSD version of tput utility replaced with ncurses' one. Fixes#9606;
* terminfo database is provided as mandatory package installed during
building target system;
* Remove libtermcap module. The termcap database source and
corresponding build rules are not removed to provide backward compatibility -
until all optional packages will be rebuild on upcoming system version
using terminfo. Note that gcc2 builds may require to provide termcap a bit
longer in the sake of binary compatibility with R5 era apps.
* add vesa.accelerant, vesa driver, ps2, isa, bios, generic_x86 for x86_64 too
* only have reiserfs, firewire, agp_gart targets for x86
* reverted hrev43950, liblocale alias shouldn't be needed anymore
This means the build tools will no longer be built against the host
platform's libbe, which avoids compatibility problems -- e.g. an
older Haiku host libbe may not have certain features the build tools
require -- and also makes the build behave more similiar on Haiku and
other platforms. The host libroot dependency still remains and is not
easy to get rid of.
Also remove some bits of BeOS/Dano/Zeta build support.
* Update MimeSet rule to use the MIME DB the build system creates.
* Add CreateAppMimeDBEntries rule and call it from Link for targets that
might be applications that need to be registered with the MIME DB. For
the target the rule is invoked with it creates a directory into which
the entries for the types to be registered are written. The directory
is associated with the target via the HAIKU_MIME_DB_ENTRIES variable.
* AddFilesToContainer: If a target is added that has MIME DB entries,
also add those to the container.
* build_haiku_package: Call mimeset for the package contents.
Since the same driver can be added in more than one category, in a few
cases AddDriversToContainer was invoked twice for the same target. Avoid
adding the driver twice to add-ons/kernel/drivers/bin in such a case.
Didn't really cause any problem, but no need to copy the file twice.
* build_haiku_image: Remove MIME DB creation code.
* Rename beos_mime source directory to mime_db.
* Add rules to build the MIME DB in the source directory's jamfile.
* Add MIME DB directory to haiku.hpkg in data/mime_db.
Instead of the boolean alwaysUpdate, isCDPackage, and stripDebugSymbols
parameters use a uniform flags parameter which can contain any of the
respectively supported flags (alwaysUpdate, cdPackage,
stripDebugSymbols, !stripDebugSymbols).
* Add optional packages Zlib and Zlib-devel.
* Simplify the build feature section for zlib and also extract the
source package.
* Replace all remaining references to the zlib instance in the tree and
remove it.
* Introduce the notion of build feature attributes and add rules
SetBuildFeatureAttribute and BuildFeatureAttribute to set respectively
get a build feature attribute.
* Add rule ExtractBuildFeatureArchives to download and extract archives
and set build feature attributes to extracted entries.
* Add rule UseBuildFeatureHeaders as a shorthand for getting a build
feature attribute and adding it as a system header search directory.
We extract both packages to the same directory now, since the icu_devel
package depends on the base package and contains relative symlinks to
the libraries. ATM that isn't really relevant, since we link directly
against the libraries from the base package, but we might want to
change that eventually.
When invoked for a hpkg only the installation location (i.e. "common"
or "system") has to be specified now and "common" is the default. The
rule uses AddPackageFilesToHaikuImage now.
It points to the settings directory appropriate for global settings.
When a package is installed in ~/config, we cannot use the settings/
subdirectory for global settings, since then the files could clash with
equally named user specific settings files (e.g. in case of
ssh/known_hosts). So we use ~/config/settings/global for global
settings instead.
Apparently it isn't ready yet. I haven't found a single syslog on Trac
that shows a successful initialization of the driver, and on my
machine, where it does that at least, the system freezes during boot.
