This module provides an interface for drivers to use to perform calls
to the BIOS (only really for use by graphics drivers which need to use
the VESA BIOS). It uses the x86emu library from X.org which emulates
a real mode x86 CPU. This is necessary for x86_64 as virtual 8086 mode
no longer exists there.
Uses the x86 architecture code, made fixes to printf formats and a
couple of 64-bit fixes. Only potentially intrusive change is that I've
changed PCI.h to use uint32 rather than ulong. I don't see any way
this would cause any issues, though.
I commited... need to get back into the habbit, sorry for the noise.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42961 a95241bf-73f2-0310-859d-f6bbb57e9c96
by "jarz" to rewrite the last remaining (?) headers in order
to get rid of the Be copyright. Thanks a lot and sorry for the
long delay.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42958 a95241bf-73f2-0310-859d-f6bbb57e9c96
See http://www.acpica.org/download/changes.txt done after 2010-10-13 for info on ACPI changes.
* Adapted the embedded controller to match current FreeBSD one.
There will probably be some issues with these changes initially.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42637 a95241bf-73f2-0310-859d-f6bbb57e9c96
available as a module function as well.
* Remove some unneeded resetting from tty_destroy_cookie.
* Move the public module functions to the public API section of the file and
order them by their declaration order in the module info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42154 a95241bf-73f2-0310-859d-f6bbb57e9c96
partition_module_info::uninitialize().
* Implemented the hook for BFS.
* Implemented KFileSystem::Uninitialize().
Fixes failure to initialize a BFS initialized device with an intel partition
map.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42142 a95241bf-73f2-0310-859d-f6bbb57e9c96
from settings retrieved through get_{current|possible}_resources().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41382 a95241bf-73f2-0310-859d-f6bbb57e9c96
turns out to be flaky, is a little bit of a hack anyway and performs unnecessary
operations. The functionality is now handled kernel side which optimizes those
problems away.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41372 a95241bf-73f2-0310-859d-f6bbb57e9c96
the base bus number and segment which is what we're using them for. It should
work generically, however I only tested it to look up PCI bridge devices.
The logic is a subset of what is done in AcpiEvPciConfigRegionSetup when setting
up the operation region for a PCI device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41365 a95241bf-73f2-0310-859d-f6bbb57e9c96
the cached pci_info and writes the new value into PCI config space. Drivers
using either mechanism to enumerate devices will therefore get the updated
value.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41364 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Some automatic whitespace cleanup.
This makes the interrupt model change via kernel actually work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41340 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ACPI module now has a get_possible_resources function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41320 a95241bf-73f2-0310-859d-f6bbb57e9c96
drivers in the future, such that NetworkStatus and similar software can show
nice names for the devices. The device manager should implement this and
return the B_DEVICE_PRETTY_NAME of the device (and in turn, new style drivers
should actually set this).
* Implemented handling of this ioctl in the scsi_periph to return the vendor/
product strings.
* Implemented this in the ATA bus manager to return the model from the info
block.
* KDiskDevice now fills in the partition_data::name if the B_GET_DEVICE_NAME
succeeds.
* As a side effect, at least BootManager now shows the drive name; maybe
DriveSetup does as well for the raw device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40231 a95241bf-73f2-0310-859d-f6bbb57e9c96
Renamed USB_CDC_*_PARITY and USB_CDC_*_STOPBIT* to follow the usual
naming pattern.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40091 a95241bf-73f2-0310-859d-f6bbb57e9c96
* A lot of HID definitions got extracted from USB_hid.h into their
own files. Many more definitions have been added from the specs.
* The names have been moved into the proper B_* namspace.
* The USB hid driver has been adapted for the changes.
Thanks a lot and sorry for the delay!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39874 a95241bf-73f2-0310-859d-f6bbb57e9c96
and doesn't come with BeOS backwards compatibility. It also has the BeOS
compatibility ioctl ops removed and such. I've actually made this back in april,
so I don't really remember any more details.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39760 a95241bf-73f2-0310-859d-f6bbb57e9c96
Embedded Controller still needs some looking into, and I had to remove the WIP code for dumping MADT.
Both are on my TODO.
Also removed a lot of unneeded parts of ACPICA from trunk and did some cleanup in Jamfile.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39565 a95241bf-73f2-0310-859d-f6bbb57e9c96
restrictions for virtual/physical addresses.
* vm_page_allocate_page_run():
- Fixed conversion of base/limit to array indexes. sPhysicalPageOffset was not
taken into account.
- Takes a physical_address_restrictions instead of base/limit and also
supports alignment and boundary restrictions, now.
* map_backing_store(), VM[User,Kernel]AddressSpace::InsertArea()/
ReserveAddressRange() take a virtual_address_restrictions parameter, now. They
also support an alignment independent from the range size.
* create_area_etc(), vm_create_anonymous_area(): Take
{virtual,physical}_address_restrictions parameters, now.
* Removed no longer needed B_PHYSICAL_BASE_ADDRESS.
* DMAResources:
- Fixed potential overflows of uint32 when initializing from device node
attributes.
- Fixed bounce buffer creation TODOs: By using create_area_etc() with the
new restrictions parameters we can directly support physical high address,
boundary, and alignment.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37131 a95241bf-73f2-0310-859d-f6bbb57e9c96
map_physical_memory()'s physicalAddress parameter type from void* to
phys_addr_t. This breaks source compatibility, but -- as long as
phys_{addr,size}_t remain 32 bit wide -- keeps binary compatibility with
BeOS.
* Adjusted all code using the affected interfaces (Oh what fun!). Added a few
TODOs in places where the wrong types (e.g. void* for physical addresses
are used). Looks like quite a few drivers aren't 64 bit safe and others
will break with PAE.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36960 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed irq_routing struct from ACPI.h to where it is used. Might be able to use acrestype.h instead of duplication.
* Disable old embedded controller and remove it from image.
* Move embedded controller code to busmanager module.
* Remove (some) code duplication
Should work as before, but is now initialized right after the bus manager. Can probably remove further code duplication.
I hope I've done it correctly, feedback is most welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36420 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Exposed ACPI API needed by Embedded Controller
This will be removed again if moved inside the bus manager.
It also duplicates ACPI's own headers so it might go out of sync atm.
* Added mutex to controller and fixed the mixup between acpi_status needed in int handlers and Haiku status.
* Major code cleanup
Not for headers as they are mostly redundant if we move the controller.
Variable names still needs some cleanup
This makes the ACPI errors from the controller understandable. I get AE_NO_HARDWARE_RESPONSE now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36318 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implement such a module for x86 which currently exports only an MSI API.
* Implement the PCI part for configuring and enabling MSIs.
* Some automatic whitespace cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36223 a95241bf-73f2-0310-859d-f6bbb57e9c96
