* added optional feature package for freetype 2.4.6 gcc4/gcc2 x86 and gcc4 ppc.
* FT_CONFIG_OPTION_SUBPIXEL_RENDERING is disabled, --include-patented-code doesn't
change this setting anymore. This would require different packages.
* drop freetype sources and headers from the tree.
* fix decorators, test app server and appearance to use feature package headers.
* hybrid build untested.
* The AtomBIOS timeout fix has made my DP bridge
stop working
* The current DisplayPort code is a little lacking
on DP link training... I think thats the cause.
* This puts the first steps towards DP training
in place.
* I plan on trying to make some of this DP stuff
common accelerant stuff after it works.
* This makes future changes less troublesome, although we should also add
some virtual slots there (probably just dozens of it, though, that's why
I was being lazy).
* Don't pass messages by value; they are copied twice this way.
* Minor coding style corrections, automatic whitespace cleanup.
* Rather than duplicating the decision taking logic involving wheter or not to draw
the outline or glow in every replicant, update be_control_look to make it more
generic.
* The Monitoring of the background preferences is now only done in Tracker (where it
was already being done).
* Add a BControlLook::B_IGNORE_OUTLINE flag to avoid this new behaviour.
* Remove that said logic from ActivityMonitor and use be_control_look.
* Use the ignore flag in DeskCalc to avoid the outline in its case.
Should fix#7716, #7291.
* Prepend x86_ to non-static x86 code
* Add x86_init_fpu function to kernel header
* Don't init fpu multiple times on smp systems
* Verified fpu is still started on smp and non-smp
* SSE code still generates general protection faults
on smp systems though
* maintain a list of all BPictures to do so
* BView downloads the BPicture data after recording the picture. This could probably done more efficiently using shared memory in the first place.
* Rename init_sse to init_fpu and handle FPU setup.
* Stop trying to set up FPU before VM init.
We tried to set up the FPU before VM init, then
set it up again after VM init with SSE extensions,
this caused SSE and MMX applications to crash.
* Be more logical in FPU setup by detecting CPU flag prior
to enabling FPU. (it's unlikely Haiku will run on
a processor without a fpu... but lets be consistant)
* SSE2 gcc code now runs (faster even) without GPF
* tqh confirms his previously crashing mmx code now works
* The non-SSE FPU enable after VM init needs tested!
* add Wcscoll() and Wcsxfrm() ICU locale backend
* provide implementations of wcscoll() and wcsxfrm() that are using
the respective methods of the locale backend
* Casts like BReference<Derived> to BReference<Base> are now possible.
* This cast for BWeakReference is, because of the underlying structure, not automatically type safe. I used a simple hack to make the compiler complain if the cast
is not type safe. Please take a look if that can be done better.
* Smaller style and bug fixes.
* make room in mbstate_t for containing an ICU-converter's state
(well, in fact the whole converter object)
* adjust libroot's locale add-on to clone converters into a given
mbstate_t directly
* adjust ICUThreadLocalStorageValue to contain the converter pointer
instead of a converter-ID (if the converter is related to an
mbstate_t, it points into the mbstate_t).
* adjust users of converters to directly use converter pointers
instead of ICUConverterRef
* drop now unused ICUConverterManager and ICUConverterRef
* update gcc4 optional package
This brings our multibyte implementation into a fully working state,
both non-ascii and non-8-bit characters can now be handled normally
in the Terminal, i.e. this finally fixes#6276.
N.B.: Since the size of mbstate_t has changed, everything (including
the compiler!) needs to be rebuilt.
* I'd rather this be common code, but I don't have access
to the DisplayPort specifications. If I added it as common
code I would want to be 100% it was complete and variables
were named properly.
* For now putting in radeon_hd private headers
* add MultibyteStringToWchar() to ICU locale backend
* implement mbsrtowcs() and mbsnrtowcs() on top of
MultibyteStringToWchar()
* drop respective glibc files
It turns out,this is an old method added by Be, and is not really related to BView::InvalidateLayout(bool). In fact BMenu::InvalidateLayout() does something separate, but related to the BView method. I was wrong to delete this method, since it needs to have action taken each time it is called, so moving these actions into LayoutInvalidated() only worked sometimes (when the BView was considered to have a valid layout).
I have added a comment for future hackers so that they don't delete this method.
This one works with non-terminated strings that we may need to handle.
It also validates that the sequence is valid UTF-8 so it results in
the same behaviour as the version that is used when converting to
codes (syncing the enumeration and drawing behaviour).
This allows to use the debug features of the guarded heap also on
allocations made through the object cache API. This is obivously
horrible for performance and uses up huge amounts of memory, so the
initial and grow sizes are adjusted accordingly.
Note that this is a rather simple hack, using the object_cache pointer
to transport the allocation size. The alignment is neglected completely.
This adds a pair of functions vm_prepare_kernel_area_debug_protection()
and vm_set_kernel_area_debug_protection() to set a kernel area up for
page wise protection and to actually protect individual pages
respectively.
It was already possible to read and write protect full areas via area
protection flags and not mapping any actual pages. For areas that
actually have mapped pages this doesn't work however as no fault, at
which the permissions could be checked, is generated on access.
These new functions use the debug helpers of the translation map to mark
individual pages as non-present without unmapping them. This allows them
to be "protected", i.e. causing a fault on read and write access. As they
aren't actually unmapped they can later be marked present again.
Note that these are debug helpers and have quite a few restrictions as
described in the comment above the function and is only useful for some
very specific and constrained use cases.
They can be used to mark pages as present/non-present without actually
unmapping them. Marking pages as non-present causes every access to
fault. We can use that for debugging as it allows us to "read protect"
individual kernel pages.
* The vm86 code or the code running in virtual 8086 mode may clobber the
%fs register that we use for the CPU dependent thread local storage
(TLS). Previously the vm86 code would simply restore %fs on exit, but
this doesn't always work. If the thread got unscheduled while running
in virtual 8086 mode and was then rescheduled on a different CPU, the
vm86 exit code would restore the %fs register with the TLS value of
the old CPU, causing anything using TLS in userland to crash later on.
Instead we skip the %fs register restore on exit (as do the other
interrupt return functions) and explicitly update the potentially
clobbered %fs by calling x86_set_tls_context(). This will repopulate
the %fs register with the TLS value for the right CPU. Fixes#8068.
* Made the static set_tls_context() into x86_set_tls_context() and made
it available to others to faciliate the above.
* Sync the vm86 specific interrupt code with the changes from hrev23370,
using the iframe pop macro to properly return. Previously what was
pushed in int_bottom wasn't poped on return.
* Account for the time update macro resetting the in_kernel flag and
reset it to 1, as we aren't actually returning to userland. This
didn't cause any harm though as only the time tracking is using that
flag so far.
* Some minor cleanup.
Apparently I should have done a complete rebuild after moving
directories.h from headers/private/libroot to .../system, since a lot of
stuff didn't build anymore.
The implementation is temporary. Currently it reads through the packages
in the respective packages directory and checks against the package
links. Once package activation is tracked explicitly we'll use the
activation file/directory.
A BPackageContentHandler subclass that initializes a BPackageInfo from
the read package attributes. Pulled out of RepositoryWriterImpl's
PackageContentHandler.
* Remove InitCheck() and the initializing constructor.
* Rename PackageCount() to CountPackages().
* Use BOpenHashTable instead of HashMap for the internal PackageMap.
* Allow multiple packages with the same name. Equally named packages are
in a singly linked list after the first package with that name.
* Add an Iterator inner class and a GetIterator() method, so one can now
iterate through the packages in the repository.
The attribute is intended for simplifying package building. The
package's install path will be used for the package's .self package
symlink, allowing installation to a temporary directory when building
the package.
* AVLTreeMap::_GetKey(): Change return type from const Key& to Key, so
the strategy can do that as well and doesn't have have a Key object in
the node.
* Fix the Auto strategy: It was using the undefined _GetKey() instead
of GetKey().
Extended policy by IndexIteratorSuspend() and IndexIteratorResume()
methods that are invoked for the index iterator by Query::GetNextEntry()
after entering respectively before exiting.
both:
* Add Previous()/Next().
* Add Insert() version that returns a Node* instead of an Iterator.
* Add Remove() version that takes a Node* instead of a key.
TwoKeyAVLTree:
* Add GetIterator() version that takes an additional Node*, i.e.
initializing an iterator to point to the node.
* Add Iterator::CurrentNode().
This is a tree implementation with elements with primary and secondary
key. The code is a cleaned up version of ramfs's implementation. ramfs
doesn't use this version yet.
Add flags parameter to BPackageWriter::Init() (and the private
implementation classes) to indicate that an existing package file shall
be updated instead of created. Currently that always happens in-place.
When compression doesn't save space, using it nonetheless results in a
file that the reader complains about. So we fall back to writing an
uncompressed package attributes section in such a case.
The same still needs to be done for the TOC section.
* Add hooks HandleSectionStart() and HandleSectionEnd(). They are
invoked to bracket package file section, so the handler can
discriminate which section the attributes belong to.
HandleSectionStart() features a return parameter _handleSection, which
allows to handler to pick which sections it wants to handle.
* "package dump" does now print the section names.
If a FD is specified, instead of using the file with the given the FD is
used. Allows for adding entries without first copying them into the
directory structure.
This makes opening symlinks work universally in the build system tools.
Two mechanisms have been implemented, both of which don't always work.
The first is remapping via preprocessor macros. This fails where equally
named methods are used (e.g. STL fstream::open()). The other is using
hidden functions in the new libroot_build_function_remapper.a that is
linked into everything that is linked against libroot_build.so. This one
fails for functions that are defined inline in headers (Linux/glibc does
that). Together they seem to cover our build system needs ATM.
To avoid a clash with the regular version or an extra attribute level we
use the "package:provides.compatible" package attribute instead of
"package:version.major".
* The version string pattern is now:
<major>[.<minor>[.<micro>]][-<pre>][-<release>]
* Introduce B_HPKG_ATTRIBUTE_ID_PACKAGE_VERSION_PRE_RELEASE package
attribute.
* Add "preRelease" field to BPackageVersionData.
* Add "preRelease" property to BPackageVersion and packagefs's Version.
* Adjust package reader and writer code accordingly.
* Add support function vfs_get_mount_point(), so a file system can get
its own mount point (i.e. the node it covers). Re-added
fs_mount::covers_vnode for that purpose -- the root node isn't know to
the VFS before the mount() hook returns.
* Add function vfs_bind_mount_directory() which bind-mounts a directory
to another. The Vnode::covers/covered_by mechanism is used, so this
isn't true bind-mounting, but sufficient for what we need ATM and
cheaper as well. The vnodes connected thus aren't tracked yet, which
is needed for undoing the connection when unmounting.
* get_vnode_name(): Don't use dir_read() to read the directory. Since we
have already resolved vnode to the covered vnode, we don't want the
dirents to be "fixed" to refer to the covering nodes. Such a vnode
simply wouldn't be found.
* Introduce Vnode flags for covered and covering. Can be used as a quick
check when one doesn't already hold sVnodeLock.
* Rename resolve_mount_point_to_volume_root() to
resolve_vnode_to_covering_vnode().
* Adjust all code that deals with transitions between mount points and
volume root vnodes to generally support covered/covering vnodes.
Bring the changes that aren't package management related and the ones
that are but don't take effect as long as they are ignored by the build
system into the master.
Summary of changes:
* Introduce private header <directories.h> with constants for a good
deal of paths that should usually be retrieved via find_directory().
* Replace hard-coded paths by using find_directory() or the
<directories.h> constants (e.g. in drivers and the kernel).
* Add find_directory() constants needed for package management.
* Add __HAIKU_ABI_NAME and B_HAIKU_ABI_NAME macros.
* src/apps/deskbar: BeMenu.* -> DeskbarMenu.*,
DeskBarUtils.* -> DeskbarUtils.*
* Change deskbar menu settings directory from ~/config/be to
~/config/settings/deskbar.
* Other smaller cleanups, changes, and fixes.
* add temperature query support for Juniper, Sumo, Evergreen, and North Islands
* add missing thermal defines for evergreen cards
* northern island cards use the evergreen thermal calculations
* add errno_private.h, which defines the __set_errno() macro with
and without tracing
* instead of setting errno manually, all libroot's code now invokes
__set_errno(), which makes it much easier to trace changes to errno
* redirect glibc's use of __set_errno() to our own version
* update copyrights of locale backend files
Multibyte-support has been rewritten to use ICU as backend.
While this does not necessarily work properly in every aspect
(e.g. the shell still has [different] problems with multibyte-
characters now), it does fix#6263 and #7700.
* add implementations for the following multibyte-related
functions:
btwoc()
mblen()
mbrlen()
mbrtowc()
mbsinit()
mbtowc()
wcrtomb()
wcswidth()
wctob()
wctomb()
* the implementation of the above function live in a symbol
named __<name>, the above symbol names are defined as a weak
alias to the internal ones - TODO: we need to make sure to
only invoked the internal functions (i.e. prepended with __)
in order to avoid problems with symbol preemption.
* deactivate the limited mb implementation we provided before,
as well as respective stuff from glibc
* This doesn't necessarily belong here, but we're going to make use
of it in the next changeset. Additionally, this change to BeBuild.h
will trigger a rebuild of nearly all files, and applying it during
the multibyte-related work will skip another full rebuild ...
* add actual converter methods MultibyteToWchar() and WcharToMultibyte()
to locale backend and implement them in the ctype subpart
* add management code for maintaining converters referenced by mbstate_t
* add a few missing/needed header defines
* show GPU temp in millidegrees C on r600/r700
* evergreen+ support soon
* function may be moved to driver long term once testing done
* Each class has a Socket() method to retrieve the underlaying file descriptor
to be able to do the more advanced stuff, if necessary.
* A server socket is yet missing, but the rest is pretty much covered.
CFE is used in the upcoming Amiga X-1000 dualcore PPC board.
* Largely inspired by the OF and U-Boot code.
* Still largely stubbed out.
* The loader builds but I don't have a machine to test it. Anyone interested?
* Fixed issue introduced in hrev38139: restoring from the line
drawing table was hard-coded to UTF8 Ground table. That is wrong:
the table for currently configured encoding must be set back.
Please look on using of _GuessGroundTable() for details;
* Fixed issue introduced in hrev34894: the semantic of convert_xx_utf8
functions requires the destination length to be set equal to the
target buffer size. Pre-hrev34894 usage of "homebrew" conversion
functions was a bit different - destination length was set to 0.
This made any converstions of input data useless and produce no
visual results;
* Private list of supported encodings (Encoding.cpp) was replaced by
using BPrivate::BCharacterSetRoster functionality. That allows to
use centralized info about encodings in unified with other
applications (Mail & StyledEdit for example) way. Most of currently
enumerated in UTF8.h encodings now available in Terminal.
Note that UCS-2 and UTF-16 are temporary (???) excluded from the
list of encodings supported by Terminal.
* The B_UTF16_CONVERSION was added in system-wide UTF8.h declarations.
This character set is available for enumerating by BCharacterSetRoster
but not listed in public API. Looks like it was just missed;
* Special note about "Text Encoding" entry in Preference File:
So known "shortname" of encoding was used in the preferences file.
For details look on the encodings list in previous version of
Encoding.cpp. As result of migrating to BCharacterSet-provided
resources this list was deleted and is not available anymore.
Instead of it the IANA name of the character encoding targeted
to be used for this purposes. Frankly speaking this part looks
like not working at the moment. The value of text encoding is
hardcoded to "UTF-8" now and is not affected by any operations
in Terminal menu. Note that "shortname" for default encoding
was "UTF8" but the saved value is "UTF-8" - and they are looking
not dependent at all. So this change should not introduce any
kind of backward incompatibility.
* add missing chipset ranges
* add a few more older (X1200) PCI ID's (mostly IGP)
* add code to detect and set frame buffer size on old chipsets
* we get to the connector detection currently and fail due to the
lack of legacy support on my X1200 IGP
* Map build variables HOST_CPU and HOST_ARCH to x86_64, if it they are
* x86 and
64 bit and define the __x86_64__ C macro instead of __INTEL__ in that
case.
* <OS.h>: Also handle __x86_64__.
* evergreen headers are split due to different
header copyrights
* detect and set up evergreen memory controler
* change the way we manage radeon chipsets to
more closely match drm driver as the chipset
model numbers aren't in order and change from
numbers to names.
* check for evergreen when populating frame buffer
information.
* style cleanup
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43225 a95241bf-73f2-0310-859d-f6bbb57e9c96
This is coming from but does not close#7967
Adds a new (currently unused) Menu key bitmap.
Instead of having a single AltAsCommandKey() method the menus now
show the correct bitmap when you switch between your control,
windows/option, and alt/command keys. This is really not flushed
out yet since it only works when you switch those keys and not
other combinations like say switching the control and caps lock
keys but it is a step in the right direction.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43205 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Especially made sure to override archiving methods, since these are called rarely, so the cost is very minimal
* Otherwise, the closer a class is to a base class, the more likely I was to give it all the overrides.
of the slab code. It is generic as it only contains the link to a tracing entry
and not any application specific info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43188 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Move the files shared between server and preflet to the server folder.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43159 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed completely broken error reporting; Write()/Read() will now return the
proper error code (and ssize_t instead of int32).
* Reimplemented WaitForData() using poll() which is more efficient.
* Now uses BNetworkAddress to resolve the server address which also should now
work with IPv6.
* Removed some unused headers.
* Minor coding style cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43141 a95241bf-73f2-0310-859d-f6bbb57e9c96
While structs looked cleaner at first sight, it didn't really was any simpler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43140 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Turn VMCache::consumers C list into a DoublyLinkedList.
* Use object caches for the different VMCache types and the VMCacheRefs.
The purpose is to reduce slab area fragmentation.
* Requires the introduction of a pure virtual VMCache::DeleteObject()
method, implemented in the derived classes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43133 a95241bf-73f2-0310-859d-f6bbb57e9c96
template function object_cache_delete() to be used to delete objects
constructed with it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43132 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduce TracingMetaData::IsInBuffer() to validate that a certain memory
range is within the valid tracing buffer limits.
* Use that when validating in tracing_is_entry_valid() before trying to access
the entry, resolving a TODO.
* Validate the candidate time against the handed in time (if specified) as an
additional check.
* Tiny unrelated text cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43116 a95241bf-73f2-0310-859d-f6bbb57e9c96
Some changes to the API for notifications.
* Don't go through be_roster to send a notification, but use Notification->Send() instead.
* Rename App to Group to make the purpose clearer
And some changes to the notification code itself:
* Use the Notification class as the way to convey informations about a notification. Allows easier extension of this class
* Code cleanup
* Use of the layout kit for the notify window
Unfortunately, the latter part clashes quite a bit with the changes I already did to the notification window, so it's now quite broken. Working on that next, but I wanted to separate that work from the patch ...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43114 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add TraceOutput::PrintArgs(), a va_list version of Print().
* Move code of TraceOutput::Print() to new private template function
print_stack_trace().
* Add public tracing_print_stack_trace().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43085 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add helper macros for placing markers in the source, so we can get the
address ranges of code we're interested in.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43071 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Move struct tracing_stack_trace to tracing.h header.
* Add tracing_find_caller_in_stack_trace(). Helper function to get the
first return address of a stack trace that is not in one of the given
address ranges.
* Add AbstractTracingEntryWithStackTrace::StackTrace() getter.
* Add tracing_is_entry_valid(). Checks, based on the additionally given
time, whether a tracing entry is (probably) still in the tracing
buffer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43070 a95241bf-73f2-0310-859d-f6bbb57e9c96
attribute/resource method in locale kit catalogs
* Only load the embedded catalog if nothing else was found, so it can easily
be overridden
* Change the resource type to 'CADA' (CAtalog DAta) for embedded catalogs, and
use a hash of the language code as the resource ID. This allows multiple
languages to be stored in the same file and does not interfere with the user
storing his own BMessages as resources.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43057 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduce "paranoid" malloc/free into the slab allocator (initializing
allocated memory to 0xcc and setting freed memory to 0xdeadbeef).
* Allow for optional stack traces for slab object cache tracing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43046 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add an AbstractTraceEntryWithStackTrace that includes stack trace handling.
* Add a selector macro/template combo to conveniently select the right base
class depending on whether stack traces are enabled or not.
* Minor style cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43045 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add a DoublyLinkedList::Contains() method to check if a list contains a certain
element.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43043 a95241bf-73f2-0310-859d-f6bbb57e9c96
Instead of computing the mime signature and giving this to the catalog system,
give an entry_ref instead. The default catalog add-on can thus look at the
right place when searching local catalogs (embedded as resources, or stored
as files next to the executable.
* This allows different versions of the same app to each have their own
catalog set,
* And also make the embedded/local catalog searching work for add-ons and
libs, instead it only worked for apps because of a getAppInfo call.
Fix cpufrequency to make use of it properly (that wouldhave worked without the
change, but nowit's mandatory, since loading a catlog by mimesignature is not
possible anymore).
Should fix#8037.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43021 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Remove BNode documentation from the source code and add it to Node.dox
* Rewrite some of the existing documents
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42986 a95241bf-73f2-0310-859d-f6bbb57e9c96
I commited... need to get back into the habbit, sorry for the noise.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42961 a95241bf-73f2-0310-859d-f6bbb57e9c96
by "jarz" to rewrite the last remaining (?) headers in order
to get rid of the Be copyright. Thanks a lot and sorry for the
long delay.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42958 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add a struct to kits/interface/Layout.cpp that uses BView::Private to
provide RAII mechanics for the removal of views (calling
BView::Private::RemoveSelf()).
Use the new struct to simplify BLayout::AddItem().
There were a large number if incorrect, duplicated, misplaced
registers that were leading to bugs in the code. This is my first
shot at cleaning them up. Luckly as we are using AtomBIOS the number
of registers we need to know about is shrinking.
* remove registers left over from register banging days
* r770 is less then r710, r720 in the drm sources. Fix in code.
* enable newer radeons for testing
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42930 a95241bf-73f2-0310-859d-f6bbb57e9c96
* don't resize the frame buffer after mapping it.. doesn't make sense
* add memory controller code and program the memory controller for r600
* remove unneeded frame_buffer_int
* don't malloc mc_info, waste of time
* fix scaler setting
* vramStart in mc should be 0... get vertical colored lines however when this
this is set properly (everything in mc_info is the MC view of FB BAR)
When vramStart is the FB physical address... i get proper video on some cards
... thoughts?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42924 a95241bf-73f2-0310-859d-f6bbb57e9c96
BUSBDevice::GetDescriptor() to retrieve whatever descriptor, including a
complete configuration descriptor.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42905 a95241bf-73f2-0310-859d-f6bbb57e9c96
* we can now utilize these chipset
flags throughout the driver to better id
cards and features
* remove leftover BIOS size define from intel skel
* no *real* functional change
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42904 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add potential support for IGP chipsets
* igp code is *untested* and should work *in theory*
* potentially resolves#8040 / #8046 ?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42901 a95241bf-73f2-0310-859d-f6bbb57e9c96
* will fix other var names to match style guidelines
shortly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42891 a95241bf-73f2-0310-859d-f6bbb57e9c96
base intel_extreme driver long ago
* no functional change
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42880 a95241bf-73f2-0310-859d-f6bbb57e9c96
* correct? color mode setting bug
* fix var naming to match style guidelines
* add a few missing register defines
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42879 a95241bf-73f2-0310-859d-f6bbb57e9c96
(they are actually reversed), so introduce a find_reg() inline function to map
such regs individually instead. Should fix interrupt storms on SandyBridge.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42870 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also add the definitions and some specifics for IronLake (ILK), but keep the
IDs disabled as at least the one version I can test with doesn't work yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42869 a95241bf-73f2-0310-859d-f6bbb57e9c96
often enough and simple enough to write that we should allow it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42865 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Make the pointer style consistent accross all components, which should make it
easier when working all over the place.
* 80 char limits.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42863 a95241bf-73f2-0310-859d-f6bbb57e9c96
control block. Doesn't matter on (G)MCH (they are the same register block tehre)
but fixes mode setting on PCH again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42862 a95241bf-73f2-0310-859d-f6bbb57e9c96
register blocks and we encode their block into the register definition. On
register access these blocks are then translated into the final address.
* Set up the register blocks for (G)MCH and PCH variants.
* Remove most SandyBridge code that was actually PCH specific and is now taken
care of automatically.
* This will temporarily break SandyBridge support again until the right
transcoders are actually programmed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42857 a95241bf-73f2-0310-859d-f6bbb57e9c96
(the one in my new ThinkPad X1). The PLL is still off a bit so it has a few
blurry stripes, but EDID and mode setting basically works.
* Starting with IronLake the north/south bridge or (G)MCH/ICH setup was moved
into a platform control hub (PCH) which means that many registers previously
located in the GMCH are now in the PCH and have a new address.
* I'm committing this mostly because this way the additions are more easy to
follow. It is a bit messy and I'll clean it up more and possibly make it a
bit more generic. Also most of these changes actually apply to IronLake and up
and aren't SandyBridge specific, so a few of those additions will still get a
broader scope and new chips will be added.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42839 a95241bf-73f2-0310-859d-f6bbb57e9c96
be used to mark certain io interrupt vectors as reserved and to allocate from
the still free ones. It is a kernel private API for now though.
* Make the MSI code use that functionality instead of implementing its own which
slims it down considerably and also removes quite a bit of hardcoded knowledge
about the interrupt layout that didn't really belong there.
* Mark the various in-use interrupts as reserved from the components that
actually know about them (PIC, IO-APIC, SMP, APIC timer and interrupt setup).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42832 a95241bf-73f2-0310-859d-f6bbb57e9c96
BNetworkRoster::{Count|GetNext|Add|Remove}PersistentNetwork() as it fits
better (thanks Philippe for the heads up).
* Implement the backend for these functions in the net_server and also move
conversion of the wireless_network based format into the settings based format
there.
* Implement removal of a network from the settings and make adding a new network
with the same name replace the old one instead of just adding multiple ones.
Might need to change this in the future depending on how we want to handle
multiple networks with the same name (i.e. distinguish based on BSSID or
similar).
* Fix apparent oversight that caused configured networks _not_ to be used in the
auto join attempt.
* Remove auto joining open networks. I've been bitten by that more than once now
because we happen to have an open network in the neighbourhood that I now
accidentally used to transfer quite a bit of (unencrypted) stuff before
noticing... In the future, one will instead have to explicitly join an open
network once and store that config. Note that the driver will actually still
auto-associate with open networks due to how things are set up currently.
Note also that the auto join will fire join requests whenever there's a
disassociation event, so you might see spurious join dialogs when the
wpa_supplicant actually just re-establishes the connection.
* Make join requests async again. Instead of waiting for a synchronous reply of
the wpa_supplicant we instead return success when the request has been sent.
While the API call might still be made synchronous again in the future, the
net_server should really not block on an external application. In the case of
the wpa_supplicant we would otherwise deadlock when using the new
*PersistentNetwork() API after a successful join, and in other cases we might
just unacceptably delay other calls.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42816 a95241bf-73f2-0310-859d-f6bbb57e9c96
I try to keep UBSConfiguration binary compatibility, but proofreading is welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42812 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a few missing breaks in MailProtocolThread::MessageReceived()!
* Minor coding style update.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42808 a95241bf-73f2-0310-859d-f6bbb57e9c96
be stored by the backend in the net_server. I put it in BNetworkDevice because
that is where network enumeration is done as well, but I'm not sure that it fits
there particularly well.
Since BNetworkDevice::GetNetwork() directly interfaces with the driver and gets
the networks from scan results, such persistent networks don't yet show up in
those enumerations.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42807 a95241bf-73f2-0310-859d-f6bbb57e9c96
* support all weekdays as start of week, not only Sunday and Monday
(at least Saturday is used for real, too)
* introduce BWeekday as enumeration of weekdays (currently in Locale.h,
may be moved somewhere else later)
* change CalendarView to use BDate as its model, not individual values
for day, month and year, such that no more date computation is done
in CalendarView itself
* some more style cleanups in CalendarView along the way
* add monthwise paging to CalendarView
* adjusted Deskbar and Time preflet accordingly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42720 a95241bf-73f2-0310-859d-f6bbb57e9c96
* rename decode_* to get_*
* clean up get_* text when unknown connector/encoder
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42717 a95241bf-73f2-0310-859d-f6bbb57e9c96
to a panic at boot.
* Make the panic message more explicit when there is no more room left.
This should hopefully fix#7869.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42715 a95241bf-73f2-0310-859d-f6bbb57e9c96
* determine first day of week and draw calendarview accordingly
* some cleanup: drop superfluous DateTimeView::Draw()
* automatic whitespace cleanup
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42697 a95241bf-73f2-0310-859d-f6bbb57e9c96
(.c to keep compatibility with older C accelerants)
* use functions for decoding video_electronics
* thanks for the guidance Axel!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42668 a95241bf-73f2-0310-859d-f6bbb57e9c96
this seems like it could be useful for more then
just radeon_hd.
* idea from linux drm driver
* feedback / flames welcome
* can move into radeon_hd private defines if requested
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42662 a95241bf-73f2-0310-859d-f6bbb57e9c96
* malloc storage for mc state info
* redo pll range struct
* change to ATOM_ENCODER_MODE for connector info
* redo pll calculations to match AtomBIOS requirements
* some structure changes
* no longer init already posted AtomBIOS as it
causes an infinite loop of AtomBIOS calls
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42644 a95241bf-73f2-0310-859d-f6bbb57e9c96
for message formatting
* adjust LocaleKit to use namespace 'icu', as ICU has been configured to no longer
use a version specific namespace
* adjust LocaleKit to general API changes in ICU 4.8
Note: all software using ICU (like WebPositive) needs to be rebuilt!
Note: the ICU package for PPC needs to be updated before it can be used!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42638 a95241bf-73f2-0310-859d-f6bbb57e9c96
See http://www.acpica.org/download/changes.txt done after 2010-10-13 for info on ACPI changes.
* Adapted the embedded controller to match current FreeBSD one.
There will probably be some issues with these changes initially.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42637 a95241bf-73f2-0310-859d-f6bbb57e9c96
* when TRACE_ATOM is enabled in bios.c, we dump
each accelerant instance of the AtomBIOS rom
to disk in /boot/common/cache/tmp/ (next to usb
hid descriptors in the same file name format)
* these images can be parsed with the AtomDis application
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42622 a95241bf-73f2-0310-859d-f6bbb57e9c96
directory of a file without traversing leaf links (just like lstat()).
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42620 a95241bf-73f2-0310-859d-f6bbb57e9c96
faster than before.
* This also solves a TODO in dladdr(), although I did not use
get_library_symbol() as I didn't quite see how that could fit as the comment
suggested; there is now a new function get_symbol_at_address() for this.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42598 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add igp property to pciid map
* add disabled bios pull for r700 and ni cards
* refactor model numbering as >R700 AMD switched
to named card families
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42596 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add missing header for some radeon registers
* begin removing now un-needed direct register calls
* move and refactor crtc functions
* fix function naming to be clearer
* create more AtomBIOS style calls
* this will eat your cat at the moment, don't bother testing
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42582 a95241bf-73f2-0310-859d-f6bbb57e9c96
* implement various methods to pull AtomBIOS from card
* add some missing registers to headers from linux drm driver
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42553 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Point AtomBIOS to PCI rom mapped in memory
* Things no longer crash, but we get an Invalid BIOS Magic error
in the logs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42543 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Pull pci_rom base address from pci subsystem
* Point AtomBIOS parser to pci rom address
to set up and malloc atom_context
* This is untested! Don't run on an
expensive card until I test it on a cheaper
one!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42541 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add missing Idle call for connectors
* Reformulate blanking.. this should match what the
register is after the GTF vesa call
* Set FrameBuffer to card internal address
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42509 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rename of_support.h/cpp back to support.cpp as per Axel
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42498 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rename a few variables to make more sense
* OF_FAILED is a signed int.. fix return of of_address_cells
* OF_FAILED is a signed int.. fix return of of_size_cells
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42497 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add header file to support of_support.cpp
* Add support functions to obtain address and size cell lengths
* Small style cleanups
* Add support for G5 PowerPC cpus...
* Refactor memory region code to be aware of 64-bit OF addresses.
As-is the boot loader wouldn't start on G5 systems because
OpenFirmware memory base addresses are stored as two 32-bit
unsigned int 'cells' vs one 32-bit unsigned int 'cell' on G3/G4.
I removed the static struct and replaced it with a template
and pass uint32 or uint64 depending on the address cell size.
Thanks for the idea DeadYak!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42486 a95241bf-73f2-0310-859d-f6bbb57e9c96
into a usable function - this has some coding style issues I did not care to
fix.
* _AddBaseMode() now computes the mode in case it is not present in the list
yet.
* This should help with bug #7787.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42420 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Don't return Core 2 Extreme as a fallback result, keep the more generic variant Core 2 for this.
* Test the presence of "Pentium" in the name and in that case, use that word to identify, despite
the family id/product name confusion.
Might fix#6136, #4427. needs testing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42405 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add crtControl global register
* Add grphUpdate storage
* Do some logical reordering of register writes
* Correct crt final power-on checks
* Enhance tracing
* Disable PLL, it is needed but seems to completely break
the modesetting resulting in black-screen-of-doom.
(fixing PLL set/calibration is now priority one)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42380 a95241bf-73f2-0310-859d-f6bbb57e9c96
sdl_e_type in network byte order, causing such a socket not to receive
anything.
When working around that by not using htons() on bind, sending would then fail
on such a socket because the byte order is actually required to be swapped
there.
* Extend the comment for the B_NET_FRAME_TYPE macro to document that the input
types are supposed to be in host byte order to avoid future confusion.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42357 a95241bf-73f2-0310-859d-f6bbb57e9c96
reserved amount was simply too small, but also works around address space
waste with many larger bitmaps.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42298 a95241bf-73f2-0310-859d-f6bbb57e9c96
Localize the mail server and preferences. Get rid of MDRLanguage.h.
The Japanese translation is attached to #7689. Please give a notice when it is in the translation system and the ticket can be closed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42268 a95241bf-73f2-0310-859d-f6bbb57e9c96
default_mail{_in|_out}_directory() methods in the BPrivate namespace.
* Used these methods in the inbound/outbound protocols.
* Moved WriteMessageFile() into the BPrivate namespace as well, and put its
prototype into a new header MailPrivate.h along with the new directory
getters.
* Removed the automatic copy to the sent directory again, and only have one
directory for incoming mail. Incidentally, this fixed#7509, although the
underlying filter restriction remains.
* Automatic whitespace cleanups, some style cleanups. Sorry for the mess.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42260 a95241bf-73f2-0310-859d-f6bbb57e9c96
* GCC 4.5 complains about switchs with cases not part of the directory_which enum
* Merge FSUtils directory_which values into the enum
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42251 a95241bf-73f2-0310-859d-f6bbb57e9c96
exit info with some generic status.
* team_create_thread_start(), common_thread_entry(): Initializes the team's
exit info (if that's the main thread) before calling thread_exit(). Fixes
#7686.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42183 a95241bf-73f2-0310-859d-f6bbb57e9c96
* libbe_build: Where possible we directly use the actual Haiku headers and
sources, now. In the headers/build headers we just include the respective
Haiku headers as needed. That still allows overrides where necessary. The
intention is to make it easier to keep the build stuff in sync.
* Fixed a few printf() format and signed/unsigned comparison warnings.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42179 a95241bf-73f2-0310-859d-f6bbb57e9c96
[u]int32 and [u]int64 to avoid clashes with the int/unsigned int versions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42165 a95241bf-73f2-0310-859d-f6bbb57e9c96
available as a module function as well.
* Remove some unneeded resetting from tty_destroy_cookie.
* Move the public module functions to the public API section of the file and
order them by their declaration order in the module info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42154 a95241bf-73f2-0310-859d-f6bbb57e9c96
partition_module_info::uninitialize().
* Implemented the hook for BFS.
* Implemented KFileSystem::Uninitialize().
Fixes failure to initialize a BFS initialized device with an intel partition
map.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42142 a95241bf-73f2-0310-859d-f6bbb57e9c96
destroy the partitioning system's on-disk structure.
* Adjusted the existing partitioning system implementations accordingly.
Actually implemented the hook for the intel partitioning system.
* Added Uninitialize() method to KDiskSystem and KPartitioningSystem. The latter
implements the method calling the new module hook.
* _user_uninitialize_partition(): Also let the disk system uninitialize the
on-disk structure.
This fixes the failure to initialize a disk device with BFS, when it contains a
valid partition map with at least one partition.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42140 a95241bf-73f2-0310-859d-f6bbb57e9c96
its size.
* Added "Display current boot loader log" item to the "Debug Options" boot
loader menu. It displays what the boot loader has logged so far. Might be
interesting for early boot issues when serial debugging is not possible.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42134 a95241bf-73f2-0310-859d-f6bbb57e9c96
* If we detect ACPI 2.0 or higher, the spec says we should use the XSDT rather
than the RSDT. Attempt to do so, falling back to the RSDT if the former fails
to be mapped/validated.
* Refactored acpi_find_table into a templated version to account for the fact
that the XSDT exports different pointer widths for its links to other tables
than the RSDT.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42133 a95241bf-73f2-0310-859d-f6bbb57e9c96
address protection bits as well as the wiring flags for an arbitrary address
in a team's address space. Will be used in the debugger for the purposes
of the memory inspector/editor, in order to determine whether it can in fact
allow editing for the currently inspected address range.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42129 a95241bf-73f2-0310-859d-f6bbb57e9c96
which don't wait for a character, but return -1 when no character is
available ATM. Implemented correctly for x86 only.
* Changed the semantics of the debugger_module_info::debugger_getchar() hook.
It is supposed to return immediately now.
* Adjusted usb_keyboard accordingly. Hacked UHCI's debug_process_transfer() to
achieve that. It does now start, check, or cancel a transfer. Split
UHCI::ProcessDebugTransfer() into StartDebugTransfer(), and
CheckDebugTransfer() accordingly, and also added a CancelDebugTransfer().
The latter seems to have issues. Michael, please have a look. I have no clue
what I'm doing. :-)
* Adjusted kgetc() to poll all possible inputs using the new
functions/semantics. This allows to use any input (USB, PS/2, serial) in KDL.
* Removed the no longer needed "serial_input" command.
* read_line(): Also support 0x7f as backspace code. That's what xterm sends.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42126 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reorganized the kernel locking related to threads and teams.
* We now discriminate correctly between process and thread signals. Signal
handlers have been moved to teams. Fixes#5679.
* Implemented real-time signal support, including signal queuing, SA_SIGINFO
support, sigqueue(), sigwaitinfo(), sigtimedwait(), waitid(), and the addition
of the real-time signal range. Closes#1935 and #2695.
* Gave SIGBUS a separate signal number. Fixes#6704.
* Implemented <time.h> clock and timer support, and fixed/completed alarm() and
[set]itimer(). Closes#5682.
* Implemented support for thread cancellation. Closes#5686.
* Moved send_signal() from <signal.h> to <OS.h>. Fixes#7554.
* Lots over smaller more or less related changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42116 a95241bf-73f2-0310-859d-f6bbb57e9c96
AcquireReference() now does, and adjust all callers that relied on the previous
return type.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42091 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also add equivalent methods to the layout builders in LayoutBuilder.h
* BSplitView now calls BControlLook::ComposeSpacing(), instead of BSplitLayout
* part of #7447
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42077 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rename BControlLook::ComposeItemSpacing() to ComposeSpacing(), and extend it to handle the new constants.
* Adjust users of BControlLook::ComposeItemSpacing() accordingly.
* part of #7447
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42025 a95241bf-73f2-0310-859d-f6bbb57e9c96
keyboard navigation/tracking of BMenus and BMenuBars, although
many issues remain.
Should not yet go into alpha, since there is one issue which
I am not sure if it's not a regression. The issue is that
invoking a menu item with Enter for the first time seems to
have no effect, while invoking it subsequently works as
expected. I don't know, yet, if that's a regression of this patch.
In any case, it's better than before, thanks, Pete!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42004 a95241bf-73f2-0310-859d-f6bbb57e9c96
The new asynchronous tracking doesn't lock the view and makes desktop
replicants happy while clicking and dragging around. Fixes#880, #7241
and certainly other tickets, that i will revisit, about refresh locks
on the desktop or mouse related bugs. Based on a reusable MessageFilter and the
recent B_MOUSE_IDLE message. Some parts are ported from the old code
and could use further simplification.
There should be no intentional user fonctional change, except:
- slightly bigger threshold radius, shorter duration thresholds
(= 1.0 x the system-wide doubleclick setting)
- not reimplemented: quickening threshold when holding shift while dragging
a pose over a destination pose.
Some parts are ported from the old code and could use further simplification.
There is one known minor regression with autoscrolling while
rect-selecting but that will be better fixed with some changes to the
autoscroll code. Will address that ASAP. As for the unknown regressions,
please test :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41892 a95241bf-73f2-0310-859d-f6bbb57e9c96
methods the members are populated, the flat data size is calcualted, the data
buffer is allocated and the convenience pointers are set up automatically. With
initialize() an arbitrary configuration can be created, with
initialize_to_extended_joystick() a configuration is created that exactly
matches the data structure of the extended_joystick struct.
Having them here makes it easy to use the structure from a driver as well
without the need to set up everything manually.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41888 a95241bf-73f2-0310-859d-f6bbb57e9c96
into joystick_driver.h as it is convenient to have also on the driver side.
* Added comments explaining the data structure and use case of the structure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41886 a95241bf-73f2-0310-859d-f6bbb57e9c96
inside BJoystick.
* Add joystick_module_info flag to communicate support for variably sized reads.
* The variably sized data structure is set up to describe either the actual
amount of data, when variably sized reads are supported by the driver, or it
is set up so that it exactly matches the data layout of the extended_joystick
structure. This allows us to support both as input data, while only needing to
care about a single format inside BJoystick. Convenience pointers allow the
data to be retrieved without additional overhead or extra logic.
* Add some sanity checks and ensure some boundaries when dealing reading data
from the variably sized structure (as there might not be any buttons, hats,
axis at all now).
* Ensure that the extended_joystick structure doesn't change in size due to
padding by making it _PACKED (it wasn't padded though).
This is still supposed to work exactly as before. However, it opens up the
possibility to actually support arbitrary controllers with arbitrary axis, hat
and button counts. It therefore allows to actually deliver what the BJoystick
API was designed to handle all along.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41885 a95241bf-73f2-0310-859d-f6bbb57e9c96
Get*Values() functions but retrieves an arbitrary amount of button states using
a boolean array. This overcomes the 32 button limitation on the API side. Right
now the function does simply set the first 32 states from the button bitmap, as
the BJoystick to driver interface hasn't been adapted yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41882 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added an arch_debug_gdb_get_registers() interface that is supposed to provide
the register values in the format expected by gdb and implemented it for x86.
* Reimplemented gdb_regreply() to use that. Also made it buffer overflow safe.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41880 a95241bf-73f2-0310-859d-f6bbb57e9c96
already anyway (as compared to the original BeOS ones) this won't introduce any
missing symbols.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41879 a95241bf-73f2-0310-859d-f6bbb57e9c96
declarations to group them more logically. No functional changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41878 a95241bf-73f2-0310-859d-f6bbb57e9c96
to be updated with newly plugged in devices without the need to recreate a
BJoystick object.
* Do an initial (re-)scan on object creation instead of always scanning in
CountDevices() and by extension GetDeviceName().
* This makes CountDevices() and GetDeviceName() stable with regards to the
device list, so that an enumerating application doesn't suddenly get more/less
devices than it might expect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41870 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Include sorting, header style, macro naming, variable naming, spacing, ...
* Some simplifications, early returns and the like.
* The device name list items were allocated with new but deleted with free. The
whole private BJoystick list being modified by a friend class is dubious
though and should be reworked. Ideally node monitoring would be implemented
so that the list can be re-populated on demand instead of scanning through
every time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41868 a95241bf-73f2-0310-859d-f6bbb57e9c96
info and values. Inspired by and in parts based on the patch by caz_haiku in
ticket #7429 (though rewritten completely due to the other changes). Thanks
for the pointers!
* Clean up the mixup of internal joystick info and the one from
joystick_driver.h so that BJoystick and the drivers talk about the same
structures.
* Extensive coding style cleanup, simplifications, NULL checks, early returns,
std::nothrow allocations, include sorting, argument naming, ... that kind of
stuff.
* Added some TODO notes for remaining stuff.
* Automatic (and manual) whitespace cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41849 a95241bf-73f2-0310-859d-f6bbb57e9c96
is loaded. SMTP and POP still have this problem! TODO: use the ServerConnection class in these add-ons too.
This would also remove a lot of #ifdef SSL form these add-ons. Will not do it in the near future, feel free to fix it
...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41840 a95241bf-73f2-0310-859d-f6bbb57e9c96
* move all the isw... functions from wchar.h to wctype.h (just following version 7
of the POSIX base specs)
* remove all declarations from wchar.h that are in wctype.h, too
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41832 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed ShowImage to use that function.
+alpha in case Ingo gives his okay :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41782 a95241bf-73f2-0310-859d-f6bbb57e9c96
former just calls the latter. Getting the flag for a language is pretty
simplistic for now, but it won't return the wrong flag, just only a few known
ones (should be enough for ReadOnlyBootPrompt, at least).
* Ordered methods in declaration order.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41744 a95241bf-73f2-0310-859d-f6bbb57e9c96
* pass mapped frame buffer area id to accelerant
* remove my temporary hacked together frame buffer memory mapping
* completely rely on PCI BAR for now for aperture size / location instead of
R6XX_CONFIG_FB_BASE reg.
* Remove my temporary AllocateFB function.
* set grphPrimarySurfaceAddr to physical memory frame buffer location (offset 0)
* fix P/N sync setting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41722 a95241bf-73f2-0310-859d-f6bbb57e9c96
menu item it's associated with rather than an input string. This allows it
to calculate the position to start the input at, as well as the correct
line to place it on. The previous solution always put the input at the
center line, which happened to be the right place by happy coincidence
unless one also had the menu items for viewing/saving the debug syslog
present.
* Implement input buffer scrolling, and consequently lift the previous size
limit on user input (it is now only limited by the size of the passed in
buffer).
* Implement parsing of the input buffer to allow it to handle comma-separated
options. Thus, one can now input things like "disable_smp true, serial_debug_output false"
and it will be handled properly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41706 a95241bf-73f2-0310-859d-f6bbb57e9c96
