so that it can make use of the firmware installed by the OptionalPackage
Wifi-ipw2100+fw.
* Updating OptionalPackages to use the latest Wifi-ipw2100+fw package.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34833 a95241bf-73f2-0310-859d-f6bbb57e9c96
debug heap implementation.
* Added libroot_debug.so to the DevelopmentMin optional package. Since it has
the same soname as the standard libroot, it can simply be specified in
LD_PRELOAD to run a program with that version.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34788 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added VMCache::MovePage() and MoveAllPages() to move pages between caches.
* VMAnonymousCache:
- _MergeSwapPages(): Avoid doing anything, if neither cache has swapped out
pages.
- _MergeSwapPages() does now also remove source cache pages that are
shadowed by consumer swap pages. This allows us to call _MergeSwapPages()
before _MergePagesSmallerSource(), save the swap page shadowing check
there and get rid of the vm_page::merge_swap flag. This is an
optimization based on the assumption that usually none or only few pages
are swapped out, so we save a lot of checks.
- Implemented _MergePagesSmallerConsumer() as an alternative to
_MergePagesSmallerSource(). The former is used when the source cache has
more pages than the consumer cache. It iterates over the consumer cache's
pages, moves them to the source and finally moves all pages back to the
consumer. The final move is relatively cheap (though unfortunately we
still have to update all pages' vm_page::cache field), so that overall we
save iterations of the main loop with the more expensive checks.
The optimizations particularly improve the common fork()+exec*() situations.
fork() uses CoW, which is implemented by putting two new empty caches between
the to be copied area and its cache. exec*() destroys one copy of the area,
its cache and thus causes merging of the other new cache with the old cache.
Since this usually happens in a very short time, the old cache does still
contain many pages and the new cache only few. Previously the many pages were
all checked and moved individually. Now we do that for the few pages instead.
A very extreme example of this situation is the Haiku image build. jam has a
huge heap (> 200 MB) and it fork()s+exec*()s for every action to be executed.
Since during the cache merging the cache is locked, any write access to a
heap page causes jam to block until the cache merging is done. Formerly that
took so long that it killed a lot of parallelism in multi-job builds. That
could be observed particularly well when lots of small actions where executed
(like the Link, XRes, Mimeset, SetType, SetVersion combos when building
executables/libraries/add-ons). Those look dramatically better now.
The overall speed improvement for a -j8 image build on my machine is only
about 15%, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34784 a95241bf-73f2-0310-859d-f6bbb57e9c96
Intel Pro Wireless 2100 and 2200/2945 chipsets in a license correct manner.
Thank you!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34780 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Replaced the "userOnly" parameter by a "flags" parameter, that allows to
specify kernel and userland stack traces individually.
- x86, m68k: Don't always skip the first frame as that prevents the caller
from being able to record its own address.
* capture_tracing_stack_trace(): Replaced the "userOnly" parameter by
"kernelOnly", since one is probably always interested in the kernel stack
trace, but might not want the userland stack trace.
* Added stack trace support for VM cache kernel tracing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34742 a95241bf-73f2-0310-859d-f6bbb57e9c96
be run again or generated/build/BuildConfig needs to be adjusted manually.
* Removed bochs debug hack.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34721 a95241bf-73f2-0310-859d-f6bbb57e9c96
Renamed OpenTerminal to Open Terminal, since it sounds much more like a phrase
than a label for an add-on. Fixes#4434.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34676 a95241bf-73f2-0310-859d-f6bbb57e9c96
This driver was confirmed as working stable for a week by Algirdas Buckus.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34675 a95241bf-73f2-0310-859d-f6bbb57e9c96
CreateAsmStructOffsetsHeader mechanism to generate a header with macros
defined to the sizes of the structures we're interested in and when compiling
in C mode define the structures as "struct { char bytes[size]; }".
It works in principle, but due to how jam works, one would have to specify the
dependency to the generated header for all sources that include it directly or
indirectly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34441 a95241bf-73f2-0310-859d-f6bbb57e9c96
images. The atheros wlan driver isn't included in the NetBootArchive, because
you can't tell the driver, which wlan it should connect to.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34369 a95241bf-73f2-0310-859d-f6bbb57e9c96
release branch. This completes the build system part of #5036.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34275 a95241bf-73f2-0310-859d-f6bbb57e9c96
conditionally define some of the new stuff there. That fixes the build under
a r34172 Haiku, though it also causes some problems that needed working around.
Haven't tested under newer Haiku revisions yet. Will do tomorrow.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34267 a95241bf-73f2-0310-859d-f6bbb57e9c96
compatible platforms as well, Ingo. This fixes building Haiku under Haiku.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34248 a95241bf-73f2-0310-859d-f6bbb57e9c96
and types.h. The idea is to provide a basic architecture/compiler
abstraction by defining types and macros that allow the posix/ and os/
headers to be mostly architecture/compiler agnostic.
* Adjusted the posix/ and os/ headers accordingly.
* <SupportDefs.h>: Introduced B_PRI* and B_SCN* macros similar to the PRI*
and SCN* macros defined in <inttypes.h>, just for the BeOS/Haiku [u]int*
types and some POSIX types (e.g. off_t, dev_t, ino_t) that don't have POSIX
macros. Also the B_PRI* and B_SCN* macros are available unconditionally,
unlike the <inttypes.h> macros, which require __STDC_FORMAT_MACROS to be
defined in C++ mode.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34214 a95241bf-73f2-0310-859d-f6bbb57e9c96
* BuildSetup: Set jam variable HOST_PLATFORM_IS_64_BIT and add host define
HAIKU_HOST_PLATFORM_64_BIT if the host platform is 64 bit. Removed the
check from BeOSBuildCompatibility.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34211 a95241bf-73f2-0310-859d-f6bbb57e9c96
build_cross_tools[_gcc4] script which in turn passes it to make. Cores and
hyperthreads are plentiful these days; no need to let most of them idle when
building the cross tools.
* Sorted the configure options alphabetically again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34199 a95241bf-73f2-0310-859d-f6bbb57e9c96
* /etc now points to /boot/common/etc/, and the remaining contents of the former
"etc" are put there now, as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33986 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved the locale stuff to the data directory as well (some parts were in /etc).
* The DefaultCatalog will now also scan the user directory for catalogs.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33983 a95241bf-73f2-0310-859d-f6bbb57e9c96
directory.
* Moved fortune files to "data/system/data" in the repository, and /system/data/
in the file system.
* Got teapot.data location wrong in the repository.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33982 a95241bf-73f2-0310-859d-f6bbb57e9c96
among all defined status.
* Note, until bug #4851 is solved, the list Mail shows might differ from the
one "Mark Asâ¦" shows.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33960 a95241bf-73f2-0310-859d-f6bbb57e9c96
* When DEBUG_SPINLOCK_LATENCIES is 1, the system will panic if any spinlock is
held longer than DEBUG_LATENCY micro seconds (currently 200). If your system
doesn't boot anymore, a new safemode setting can disable the panic.
* Besides some problems during boot when the MTRRs are set up, 200 usecs work
fine here if all debug output is turned off (the output stuff is definitely
problematic, though I don't have a good idea on how to improve upon it a lot).
* Renamed the formerly BeOS compatible safemode settings to look better; there
is no need to be compatible there.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33953 a95241bf-73f2-0310-859d-f6bbb57e9c96
(hopefully) correct place.
* It seems to be even harder to understand basic locking primitives: when you
think about it, it shouldn't surprise you that conditional variables never
return B_WOULD_BLOCK. This fixes gdb again.
* Added tracing support to the ports subsystem.
* get_port_message() will now resize the port heap if needed (but will also
take timeouts into account while doing so, more or less). The initial port
space is 4MB (as before), the growth rate is the same, and the system wide
limit is arbitrarily set to 64 MB (all swappable). A team limit has been set
to 8 MB, but is not enforced yet. Since ports are using up address space in
the kernel, those seems to be proper limits.
* This also fixes a strange, and rare lockup where the mouse cursor would still
move, but everything else would basically hang, but look perfectly normal from
KDL on the first look. As recently happened on Brecht's laptop, and debugged
by mmlr and me: the cbuf space got used up when lots of windows wanted to
redraw after a workspace switch. The app_server wouldn't answer anymore to
client requests, but thought it would have done so, as LinkSender::Flush()
doesn't care if it got a B_NO_MEMORY (the ports will now block until memory
is available if possible, so that should not be a problem anymore).
* Improved "port" KDL command, it now also prints the messages in the port.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33735 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rewrote Devices application. -> Thanks a bunch!! Nice work!
* Put Devices onto the image.
Changes by myself:
* Merge some code from the old "preflet" which the new app still relied on.
* Fixed some coding style issues. I didn't review all of the code yet, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33640 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Fixed issues sending data over USB bus (actually write data when
requested to; increased timeout when writing data).
- Added usb_printer to build and Haiku image.
- Sending data to printer over USB bus works now in Haiku (cat ... >
/dev/priner/usb/0). Not sure if it works when printing from an
application as I don't have a driver that supports my printer yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33501 a95241bf-73f2-0310-859d-f6bbb57e9c96
printer drivers expect the existence of this folder (for instance
Philippes Canon bubblejet driver).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33500 a95241bf-73f2-0310-859d-f6bbb57e9c96
-Added grist to the sourcecode files sent to collectcatkeys to avoid mixups
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33401 a95241bf-73f2-0310-859d-f6bbb57e9c96
-Jamrule for collectcatkeys no longer print all the strings, only a message when it can't parse one (happens for TR(variable) basically)
-Added fingerprint check in the plaintext catalog ReadFromFile. However, the adler checksum is different each time the catalog is loaded because it relies on the string being iterated always in the same order, but this is not always the case with an HashMap ! Some rethinking is needed, so disabled the check for now so it does not breaks the build
-Some try to debug the bluetooth preflet localization. Still buggy, but I wanted to commit all this mess before I break everything up again.
-Also sorted the fr.catkeys files to be in the same order as the autogenerated en.catkeys (this is useless but makes them easier to check) and updated their fingerprint even if they are still not checked.
-Miscelaneous style fixes, small bugfixes, more error checking and error messages saying where they come from.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33322 a95241bf-73f2-0310-859d-f6bbb57e9c96
This is important when setting up the TARGET_LIB* constants later, in case
the target platform is not "haiku". (i.e. libbe_test).
* Added TODO about HOST_GCC_BASE_FLAGS being wrong for GCC4. I couldn't find
the proper fix, but it is important whan compiling libbe_test on Haiku.
I worked around this by having the constant defined correctly for the
problematic file. See the TODO comment.
* Small cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33246 a95241bf-73f2-0310-859d-f6bbb57e9c96
* oshaiku.c is based on a different original from a stub, therefore it
looks like a lot of comment changes.
* achaiku.h is redone completely.
* dpc is added as boot module.
* acpi_busman.c now does all mandatory steps to init.
* style fixes
* added another acpi kernel settings to avoid full init for debugging.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33236 a95241bf-73f2-0310-859d-f6bbb57e9c96
now be inspected. Still work in progress -- bit fields and arrays don't work
correctly yet nor does type lookup beyond the current compilation unit.
* Made most of the debugger output configurable via a config header. By default
it's much less noisy now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33217 a95241bf-73f2-0310-859d-f6bbb57e9c96
-MarkForTranslation was not scanned by collectcatkeys, improved the regexp to take it into account
-Some gristing was missing in jamrules, added a bit, still seem to miss some.
-Replaced $(var:B).ext with $(var:S=.ext) as it is the proper way in order not to loose grist and mess things up
-Removed icu include and replaced direct class nesting with pointer to avoid binary compatibility breakage on ICU updates.
-Fixed TimeFormatSettingsView to properly include needed icu things. Should not be there, actually. Needs cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33210 a95241bf-73f2-0310-859d-f6bbb57e9c96
repository, not mirroed via git-svn. Calling git-svn on a plain
repository seems to cause it to go haywire.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33192 a95241bf-73f2-0310-859d-f6bbb57e9c96
work to do, but it's about time to give this code more exposure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33176 a95241bf-73f2-0310-859d-f6bbb57e9c96
user and group ids on build platforms that support them. Fixes#4458.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33066 a95241bf-73f2-0310-859d-f6bbb57e9c96
* update Firefox optional package for r1a1
+alphabranch (will do that next)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33019 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fixed precedence problem in jam rule that caused an if to evaluate to true, no matter
if a cd or an image was being built
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33007 a95241bf-73f2-0310-859d-f6bbb57e9c96
on the target image instead of extracting them, but only if the target image
is a CD image. This then speeds up installing a great lot, at the expense of
certain applications not being available in LiveCD mode. This affects
* the revision control tools and their dependency libraries,
* autotools
* texinfo
* perl and python
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32996 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the Bootscript and the InstallerFinishScript to only create and
cleanup a link on the Desktop.
* Applied patch by idefix to fix removing the Installer link from volumes
that contain spaces in the name. (Thanks!)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32995 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Bugs #4218#4275 are fixed with this version of KeymapSwitcher.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32984 a95241bf-73f2-0310-859d-f6bbb57e9c96
the previous version (which at least broke BeZilla.) This is part of #4363.
+alphabranch
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32983 a95241bf-73f2-0310-859d-f6bbb57e9c96
Updated to use all the new alpha1 packages. I have not yet done throughrough
testing myself. I figured that trunk should also use the newest packages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32885 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Removed bitmap icons.
- Updated rdef copyrights.
- Added them to the image.
I also tested them.
+alphabranch
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32799 a95241bf-73f2-0310-859d-f6bbb57e9c96
is obviously already configured not to use patented code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32577 a95241bf-73f2-0310-859d-f6bbb57e9c96
testing to determine where we are at sooner than later now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32569 a95241bf-73f2-0310-859d-f6bbb57e9c96
image and DevelopmentMin optional package. This is the original libjpeg (6b),
which I will updated to version 7 within the next few days. I need to
understand better the modifications made to it before updating.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32553 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Move the launching of files in this directory from the Bootscript to the
UserBootscript.
- This means we now ship a working UserBootscript instead of just a sample.
- Updated documentation based on this change and Humdinger's suggestions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32544 a95241bf-73f2-0310-859d-f6bbb57e9c96
The dead simple Bash code was just copied from Humdinger's patch on #1202. He
also suggested having a link on the Deskbar for this folder, but I don't know
if that is needed. We just need to document it, which I may do next.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32527 a95241bf-73f2-0310-859d-f6bbb57e9c96
make it work, one would need to use versioning for all libbe symbols. This is
worth an 8k price per file that links against libbe.so, so I didn't want to
commit this as is. An alternative to this solution would be to write a
separate application that is responsible for the app_server's window. Comments
welcome.
* Removed BeOS compatbility of the libbe_test stuff.
* Renamed the libbe_test targets from *haiku* to *test*, ie. libbe_haiku.so is
now called libbe_test.so, haiku_registrar is now test_registrar, etc.
* This also removes BeOS compatibility from tracker/FSUtils.cpp (all BeOS
compatibility should be removed, but I don't want to make Alexandre more work
in his branch, and it's not urgent at all).
* Replaced the former "run" scripts for the test environment with a single
run script (see updated NOTES file).
* Removed the libbe_test target from some applications - this was only to help
developing them under BeOS, and is thus no longer necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32521 a95241bf-73f2-0310-859d-f6bbb57e9c96
anymore with the small size, and it didn't fix the problem I originally hoped
it would.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32495 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the headers/gnu from the default headers (the Jamfiles needing it
use it explicitly, now) and moved it under headers/compatibility/.
* Added libgnu.so to the image. Still untested, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32481 a95241bf-73f2-0310-859d-f6bbb57e9c96
longer require libiconv
* removed libiconv from dependencies of DevelopmentMin, as this is
no longer true
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32479 a95241bf-73f2-0310-859d-f6bbb57e9c96
Workaround for ld using 32k alignment between ELF segments, until a proper fix is found.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32429 a95241bf-73f2-0310-859d-f6bbb57e9c96
in safe mode.
* Removed the Terminal from the Bootscript.
* Ordered the servers alphabetically in HaikuImage.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32379 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Added him to Contributors
- Missing a icon thoug, any thoughts about how it should look?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32334 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also added the automatic ATA/IDE switch logic from HaikuImage.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32304 a95241bf-73f2-0310-859d-f6bbb57e9c96
- don't clobber the parameter regs in the entry point,
- fix entry point address for netbsd loader emulation,
- added a gUImage global to point to the uimage blob with the tgz,
- added tgz info to platform stage2 args,
- add simple uimage support, just dumps the header and gets the nth blob in the image, (seems we have a bug in the math code, some infos don't print),
- made devices.cpp use them to publish the MemoryDisk,
- add an haiku_loader_nbsd.ub target which puts both the loader and kernel_arm for now (need to replace with the tgz).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32295 a95241bf-73f2-0310-859d-f6bbb57e9c96
- consolidate board specific definitions into build/jam/board/*/BoardSetup to avoid duplicating address values everywhere,
- add various addresses, boot script, custom C/C++ flags and SD card definition,
- not sure BoardSetup is included at the best place though,
- replaced board-specific ldscript with passing the loader address directly to LD from BoardSetup,
- added haiku.mmc target which generates an mmc/SD card image with a FAT partition with the files needed to boot for the board, should later be integrated with haiku.image with the BFS partition offset passed to bfs_shell, requires apt:sfdisk,mtools on GNU/Linux,
- added some more rules, one to build a script for the SD image,
- fake a NetBSD loader for now, U-Boot doesn't know haiku, and we'll need a way to pass the tgz image and RAM size, we'll either use standlone way (usual C argv[]) or the NetBSD args,
- style fixes,
- 80 cols, /me pets Ingo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32284 a95241bf-73f2-0310-859d-f6bbb57e9c96
on it. With the other changes already made, we can now use a 1440k boot image
for x86 as well, again.
* If you build a CD, you'll have to take extra care to see whether it still fits
on the floppy or not - space is really tight already.
* Made USB support optional for the CD-ROM. It's turned on, though, since we do
want to support USB-CD-ROMs by default; this is just something you can use
once in case we need to enlarge the boot floppy to 2880k again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32282 a95241bf-73f2-0310-859d-f6bbb57e9c96
Since we don't support Flattened Device Trees yet (and they don't solve all the issues), we need a place to hole board-specific config, which are different even though we use U-Boot on ARM. Things like cpu & mmu type...
U-Boot doesn't really help us there anyway, it only passes a few board infos (RAM banks & the bill), and optionally other stuff if we fake a linux kernel or netbsd loader, but still not enough. FDT support isn't available for ARM in U-Boot yet either. So for now, and likely for stuff we can't get from FDT, we'll put board-specific config there.
Unlike desktop machines were we want a single kernel per arch, we'd rather have the kernel built for a single board without having to handle detecting mmu type at boot and switching calls like I did on m68k.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32137 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Replaced Pe GCC4 package with one that works again after the BToolTip
addition.
* Disabled Firefox and Vision GCC4 packages for the time being, so that one
at least gets a working hybrid installation.
* Added Clockwerk GCC2 and GCC4 packages. I also added it to the alpha
release build profile, so that people testing the pre-alpha images have
more easy access to it. I am not sure if it should stay there, since it may
not be polished enough. Feedback welcome! :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32112 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the boot loader to have architecture dependent partition/file system
support. Amiga/Apple partitions, and the AmigaFFS file system are now only
supported on PPC, while EFI GPT, and the FAT file system is now only supported
on x86.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31713 a95241bf-73f2-0310-859d-f6bbb57e9c96
in others, and those where we already provide functionality for (VLC, Beam).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31581 a95241bf-73f2-0310-859d-f6bbb57e9c96
in /boot/common/bin (why does it care where sed lives?)
* revert subversion to 1.6.2, as that does not depend on the expat optional
package
I think we (well, I) should be more thorough when testing new packages,
it would probably be a good idea to test each package on a new, minimal
image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31486 a95241bf-73f2-0310-859d-f6bbb57e9c96
it (headers and library) from the image. The libiconv in our tree is
only used internally as a backend for libtextencoding. The real libiconv
is provided as an optional package.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31452 a95241bf-73f2-0310-859d-f6bbb57e9c96
* gcc-4.3.3 did contain too-far-stripped versions of static libraries, missing all symbols.
Now only the unneeded ones have been removed - fixing the build of the kernel on haiku natively
* libiconv was missing the shared versions of the libraries. I have updated the package to 1.13.1
and built it with shared libs (which took me considerable time to get right - the auto*-suite
basically sucks)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31450 a95241bf-73f2-0310-859d-f6bbb57e9c96
multiple jobs. The problem was that the dummy targets used to compose the
scripts were independent from each other and jam could thus execute their
respective actions concurrently. We do now create a dependency chain between
the dummy targets of each script, so that jam is forced to execute the actions
sequentially.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31419 a95241bf-73f2-0310-859d-f6bbb57e9c96
unified the Reader and Decoder plugins and renamed the add-on to "ffmpeg".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31358 a95241bf-73f2-0310-859d-f6bbb57e9c96
Fixes bug #4035.
* Create the libnetwork.so compatibility symlinks only for gcc 2.
* Install only the shared libstdc++ to /system/lib.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31150 a95241bf-73f2-0310-859d-f6bbb57e9c96
incorrect check in the DevelopmentBase package. Thanks to Joseph Prostko for
the hint.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31132 a95241bf-73f2-0310-859d-f6bbb57e9c96
Only libGL.so aliases, libglut.so and libGLU.so, deserves to be there.
Automatic space/tab cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31128 a95241bf-73f2-0310-859d-f6bbb57e9c96
stripping the grist of SYSTEM_PREFERENCES. This also finally closes#3976
again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30997 a95241bf-73f2-0310-859d-f6bbb57e9c96
save for the additional '&'/'*' print_demangled_call() is printing for
reference/pointer arguments.
* Moved the new demangler and the gcc 2 demangler into the same module
always supporting both (the right one is chosen). In mixed gcc 2/gcc 4
environments we obviously need both of them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30954 a95241bf-73f2-0310-859d-f6bbb57e9c96
have a simple dedicated heap for the kernel debugger with stacked allocation
pools (deleting a pool frees all memory allocated in it). The heap should
eventually be used for all commands that need temporary storage too large for
the stack instead of each using its own static buffer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30949 a95241bf-73f2-0310-859d-f6bbb57e9c96
Both gcc2 and gcc4 packages are available now for installation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30935 a95241bf-73f2-0310-859d-f6bbb57e9c96
depends on CDRecord for mkisofs, which is used for building the
*-cd targets. Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30917 a95241bf-73f2-0310-859d-f6bbb57e9c96
