* Removes several previous hacks, and makes kernel loading
by our bootloader more reliable.
* Long list of "Couldn't find both text and data" errors
no gone in our bootloader as it loads our kernel
Change-Id: Ic9f5ed44975d41fb22d7ab19536261432abe84ba
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3444
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Hardlinked-By: Alexander von Gluck IV <kallisti5@unixzen.com>
Change-Id: I1a76647fe47949e950b4034629ad92ca16c53aa8
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3325
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Hardlinked-By: Alexander von Gluck IV <kallisti5@unixzen.com>
Change-Id: Id37ef57b0042722ca8089e73d420d6e4edac1019
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3121
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* This was originally added circa 2012. via hrev43954
* Our toolchain appears to work fine now with explicit
multilib enabled.
Change-Id: I1f5d55c63a6b3b6ab1c4db95da3d14d5ef2da0df
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3315
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Jam comparison logic is string-based, and so was detecting GCC >= 10
as being < 2. This rectifies that by removing the GCC version parsing
from Jam logic entirely, and setting various BuildConfig variables
instead.
Change-Id: I0c0ae3b9002fb5e77f9ca7a78600c91871657f03
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3293
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Combined with a buildtools CL, this will change the AR variable
to be more in line with conventions, where AR points at the binary and
ARFLAGS are the arguments to AR, while keeping compatibility with the
original style of using the AR variable.
Change-Id: I2b9797b9e5ab35929970487b3d1b8dddb9476c1f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3227
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Tianocore is still in an early state for RISCV64 with a lot of work
needed around qemu support.
* u-boot however is working, and can load EFI binaries... so follow the
arm model for now. (EFI via u-boot, or EFI via EFI Bios)
Change-Id: I3dfde25db17b114aedce6faefc58d7556e17a46a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3176
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* mmc might be not ideal. But raw is just a single partition and
anyboot is heavily x86. MMC will technically work for now to get
bootable images.
* floppyboot isn't used on EFI platforms, since we call two different
actions, just drop floppyboot altogether on EFI SD Images.
Change-Id: Idabb5483304007dd601bf8a1158036ffd24f73aa
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3165
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Note it is not enough to fit, you also need to disable USB boot.
Change-Id: I5159c9ddebb242c4d4874d70430da6852073fdb4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3102
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Since the boot ROM API structure is declared with a custom alignment, we
simulate it with padding bytes around, and use aligntest.prg to verify
using ARAnyM + TOS/MiNT as we know how to link simple PRG files.
It now prints something to the screen then panics when initializing the
heap.
For now one must insert the loader manually into an existing floppy
image:
dd if=generated-m68k/objects/haiku/m68k/release/system/boot/next_m68k/haiku_loader.next_m68k bs=$((0x8000)) seek=1 of=next_floppy.img conv=notrunc
Change-Id: I06d74e9d85a352aab68dedce545bbe5fe9e990d5
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2220
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Remove the InstallerInitScript (it does nothing) and the
InstallerFinishScript (it does too many things). Instead implement the
finishing directly in Installer. Separate writing the bootsector, so
that the "write bootsector" menu writes only the bootsector.
Fixes#16303
- libicule and libiculx do not exist anymore in newer ICU versions
(harfbuzz replaces them), but we didn't actually use them, so remove
them from the build feature and from the package dependencies
- Add namespace usage marcos since the newer ICU packages put ICU things
in a namespace, making it easier to have multiple versions of ICU used
side by side.
No functional change intended, but this makes it possible to build the
code with either ICU 57 (for gcc2) or 66 (for other architectures).
Change-Id: I90a9440898994459f8d6de922a3f363fbeddaaf4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2974
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* boot.scr was growing past Jam MAXLINE and was causing segfaults
* Break out to tree, data/boot could be used for other arches
* boot.scr is getting a bit complex, but supports the old
u-boot haiku_loader, as well as u-boot starting our EFI loader.
Change-Id: I93a3167ab0bc78747c1d70fedd08595e9ac89662
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2963
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Stub out makebootable like on u-boot
* Place haiku_loader.efi at EFI/BOOT/BOOTXXX.EFI
* Generate boot.scr for u-boot + EFI
* haiku-mmc.image now attempts to auto-boot in qemu-system-arm
* Same code paths should roughly apply for arm64,riscv,etc
Change-Id: I563ebd77422d9e5dfcfeeedadcbc60471e8a57f4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2938
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* This should 'fix' the arm build
* No longer parse FDT in bootloader, just pass ptr.
* The EFI loader doesn't load yet on arm
* It compiles though. Ship it!
Change-Id: I7c8ce588298dfaf4fba8054c6b6d9a92733b5943
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2903
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: Ibce15f70e20ea010937edb0a297d220c4e5a7af2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2817
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This is the partitioning system used on sparc machines.
Confirmed working with a Solaris install iso image.
Added to the haiku package for sparc and to haiku_extras for other
architectures.
Fixes#15638
Change-Id: I0584bef5e6a66eff9a33eb6675d5533cc9a45d1e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2709
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
This pulls in the final translations for applications for R1/beta2,
and also the new HaikuWebKit.
Change-Id: I2bfb8933dcf35239f6962f8bee2dea507dec6fd5
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2869
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Each TCPEndpoint has two BufferQueue members, one for the send queue
and one for the receive queue.
If DEBUG_BUFFER_QUEUE is enabled, then most methods of BufferQueue
call BufferQueue::Verify(), sometimes twice. This member function
performs some sanity checking which requires iterating through every
net_buffer in the queue.
Disabling this in a debug build improved throughput by a factor of 5x
over the loopback interface on my laptop. Using iperf the measured
throughput went from 900Mbps to around 4.8Gbps.
This patch turns this sanity checking off for release builds.
* Rename DEBUG_BUFFER_QUEUE to DEBUG_TCP_BUFFER_QUEUE
* Change the default in BufferQueue.h to disabled
* Set DEBUG_TCP_BUFFER_QUEUE to KDEBUG_LEVEL_2 in
kernel_debug_config.h
Change-Id: I262dac5d7e2889d2942bbdcf6b667cc0cbafa4c8
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2780
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The @image build is not used anymore and doesn't work. Use @nightly-raw
or @nightly-anyboot instead. The new method of release type/image type
configuration of profiles is more flexible and allows to manage the
various configurations a lot more easily for us. But the old profiles
were never formally deprecated.
Fixes#15963
Change-Id: I1c72f0e77bfbcda10502476e595f120280e8c7a4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2625
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
It does have a performance impact (as it serializes all VMCache
creations), and it is not that useful, so move it to KDEBUG_LEVEL_2
so that the beta releases (on KDEBUG_LEVEL_1) are not affected
by it.
(The nightlies are on KDEBUG_LEVEL_2, so this will not affect
them.)
Change-Id: Iab35d58f9d210651e3fd9027b75ea27a7a6928e5
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2612
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Also remove the MINGW support, as it was far too incomplete.
This *should* work under case-sensitive NTFS, but instead,
it seems #14963 occurs. So perhaps there is a GCC bug
related to case-sensitive vs. case-insensitivity after all.
for Development: automake and autoconf require perl
for DevelopmentMin: makefile_engine requires make and mkdepend
Change-Id: Ica2bace17a233e2e589e139208e468870b1cc84e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2507
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
