* With the previous commit, we can now move functions that require
calling mmu_map_physical_memory to where they should have been
originally. This also allows the SMP safe mode menu entries to
be properly generated, now that smp_init is called prior to
main().
Change-Id: I05ddca5273b11cb4846021664c1ea2cf8ba723b7
* mmu_map_physical_address will get called prior to calling main()
which leaves us without a heap, malloc, and new. Instead, use
the kernel args physical allocated range array, and then
convert to our allocated memory region type on-demand.
Change-Id: I265fd165ef7143681e8e40c3686fda1a583c20dc
The call to smp_... is not working since it relies on gKernelArgs being
fully initialized, which it isn't at this stage in the EFI loader. Jessica
says that in order to have that happen, the heap would also need to be
initialized early, which it also is not.
At least you can now force a safe videomode, which is enough for me to
be able to test video drivers.
* install syscall handlers in compatibility mode.
* copy the syscall entry in the compatibility commpage, ATM only for Intel
SYSENTER.
* copy the thread exit handler in the compatibility commpage.
Change-Id: Ic350799938815194377d8a4560cb106fe7366cc6
* File locks created by flock should only apply for the file descriptor
that was used to lock the file. Another fd on the same file should then
be denied access (calling flock should fail).
* fcntl based locks, however, are in a separate namespace and are global
to a team.
* This issue was found when running webkitpy test suite, and should close
ticket #13795.
* Don't use session or team as comparison in release_advisory_lock(), as
that information might not be available anymore (e.g. when called from
Team::~Team()). This fixes#14121.
Change-Id: I9efb96cfcefe7e72b0060220c635a665e7e643cc
Co-authored-by: Axel Dörfler <axeld@pinc-software.de>
* This gives us a solid automatic entry point to u-boot
* A uEnv.txt specifies the fdt file name
* This should work on any modern u-boot for most architectures
* Non-mmc targets will likely need some work
Change-Id: I9a00316a213a15e85d3f2e18574d64920d9bdb76
* x86_64_signal_handler_compat is a dump of x86 x86_signal_frame_function().
* the x86 compiler should be used to produce this code, which ends up in the
commpage.
Change-Id: I03da02c376f67ff83dbaba9bcb144da726463996
* x86 uses a commpage with 32-bit addresses, incompatible with the one used for
x86_64. For this reason, a compatibility commpage is needed to support a 32-bit
userland on x86_64.
* define ADDRESS_TYPE as a macro for addr_t (default) or uint32 (for the 32-bit
commpage).
* team_create_thread_start_internal() will use clone_commpage_area() with
KERNEL_USER_DATA_BASE or clone_commpage_compat_area() with
KERNEL_USER32_DATA_BASE, to setup the correct commpage.
* real_time_clock (in compatibility mode) also updates the compatibility
commpage with real time data.
Change-Id: I61605077ce0beabab4439ef54edd1eae26f26fd2
* define ELF32_COMPAT to enable ELF32 macros.
* add a flag ELF_LOAD_USER_IMAGE_TEST_EXECUTABLE to only check the format.
It will be used by load_image_internal() to check which mode to use when
loading an image.
* in arch_elf_relocate_rel(), switch to elf_addr instead of addr_t, which
would be the wrong size for elf32 on x86_64.
* the ELF compat loader reuses the relevant parts of elf.cpp and arch_elf.cpp,
excluding for instance load_kernel_add_on() or dump functions.
Change-Id: Ifa47334e5adefd45405a823a3accbd12eee5b116
* only for Intel sysenter/sysexit.
* the entry function processes stack arguments as follows:
we look up the syscall in the table, find the number of arguments.
reserve place on the stack for the arguments.
copy arguments on the stack
pop register arguments
call the syscall function
place the return value in ax and dx registers.
* TODO: we need to store the arguments somewhere for the post-syscall tracing.
* the thread exit stub is 32-bit, for the time being use hexadecimal instructions.
Change-Id: Ie5c502eb596d4fa7613d238de80643566bc19ed8
* also adjust BOOT_GDT_SEGMENT_COUNT for x86, the definition is used by the
boot loader.
* add some 32-bit definitions.
* add a UserTLSDescriptor class, this will be used by 32-bit threads.
Change-Id: I5b1d978969a1ce97091a16c9ec2ad7c0ca831656
the x86_64 compat syscall entry needs size and offset of parameters to
handle them correctly to the syscall function. struct extended_syscall_info
and struct syscall_parameter_info provide parameter count, size and offsets.
Change-Id: I7e5c7b6e19e757b28b43c3b3419b7071fae321f8
use x86 as default sSearchPathSubDir in compatibility mode.
use the generic memset/memcpy when x86_64 is the primary arch.
Change-Id: Ib464c308ff97f7ae2482ef4c037de1b1bb2bf61b
the standard x86 implementation uses the commpage, which is difficult to setup. we could
also use the C++11 version instead.
Change-Id: I4be7e3466082ff2c91bc32bef377a664ce65f3fc
* A Node/Partition cannot be member of two lists at once. This
resolves an issue where a partition cannot be found later
due to corruption of a NodeList.
* The kernel's advisory locking implemenation must not be used if the
file system has its own (ie. network file systems).
* Added ASSERT to free_vnode() that assures there is no locking left;
I recently had a lot of them around.
Since wait_for_objects can wait on sems, threads and ports in addition
to FDs, limiting to RLIMIT_NOFILES as in the select/poll case does not
work. Since space is allocated for the wait objects in kernel memory,
limiting their number to a valid range is still desireable.
The limit is now placed at the sum of max sem, thread and port count
plus RLIMIT_NOFILES.
This also fixes a signed vs. unsigned comparison warning in
check_max_fds introduced in hrev51866.
It was limited to a uint32 and could for example be overflown by the
slab MemoryManager that uses size_t on a 64 bit system.
This aligns the signature with create_area() that already uses size_t
for the size argument.
Note that the function is currently private, so the impact should be
limited.
* Show old page table location and provide more feedback
* 16 int32 * 0x10000000 > sizeof(int32), fix to uint32
Change-Id: Ib68c34f5d3c6bfa1da53241e6586c07e4e494750
Output-only events (B_EVENT_ERROR, B_EVENT_DISCONNECTED and
B_EVENT_INVALID, with B_EVENT_INVALID masked out before passing down
events) are used to indicate error, so they should not be notified if
the vnode does not have select().
Bug: 13965
Output-only events (B_EVENT_ERROR, B_EVENT_DISCONNECTED and
B_EVENT_INVALID, with B_EVENT_INVALID masked out before passing down
events) are used to indicate error, so they should not be notified if
the device does not have Select().
Bug: 13965
Output-only events (B_EVENT_ERROR, B_EVENT_DISCONNECTED and
B_EVENT_INVALID, with B_EVENT_INVALID masked out before passing down
events) are used to indicate error, so they should not be notified if
the filesystem does not explicitly provide an fd_select() override.
Bug: 13965
