busses/pci/x86: add
Other add-ons are in following commits.
Change-Id: I7a77bfaef0e8995917b4b54c8369d7075533ec26
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6220
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
the entropy source is read every second and pushed to the PRNG.
the PCI device is tested, not the ACPI.
Change-Id: I9bb6b21c7189b28a1d8a624d83b33ff6682152dc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5825
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
tested on Zen2 (Ryzen 3 5300U)
This support was submitted in October for inclusion in Linux.
Haiku supports only two profiles. We could probably add some more, and let the driver says which it supports.
Change-Id: Id7754b445bc32a691d58a1e4af630351562abc22
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5826
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
They are now created from a separate repository and via HaikuPorts.
Since the HaikuPorts packages are not yet in the BuildPackageRepository,
the actual section that adds the packages is commented out (but it only
runs for release-* targets anyway.)
The "welcome", "userguide", and "quicktour" scripts, which are symlinked
from the desktop in release builds, are added to the Haiku package's
"regular" profile instead (they do not actually require the other packages
to be installed but will detect if they are not and launch the online
versions instead.)
* Nothing uses the plural forms anymore, so drop them.
* Nothing uses the "PACKAGE" field, so drop it.
Once the Marvell driver is migrated to use a package instead of the
archive, we can drop even more of this related to HAIKU_WIFI_FIRMWARE_DO_EXTRACT.
The WiFi firmware rules are only needed for a few very old drivers.
Any devices we are going to bootstrap on will use one of the wifi_firmwares
packages instead.
This makes it a little simpler to build FUSE software with userlandfs.
Change-Id: I2a7e5494b7dc8db01e4c150de3fcdb99506ce119
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5197
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
It depends on config_manager and was still part of x86 build
Change-Id: I88680bfc5adb5cf3d6d55f514c1f193bffea3963
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5219
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Works a bit better with dark themes
* Has some interesting alternative design elements
* MIT licensed
Change-Id: I6cfd1d4d05016fb014d515d94cff3b8c8d0298b2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4508
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
The static asserts are broken on GCC2 and so did not catch this. It appears
nobody has ever tried to use this structure on 32-bit plaforms in the upstream
libraries or SPDK/DPDK?
Fixes#15212.
Translators and media-plugins are the main source of dependencies in haiku.hpkg,
and thus the main source of packages being pulled into chroots, especially
HaikuPorter chroots. (FFmpeg pulls in a rather large array of sub-
dependencies, itself.) So, here we break all the translators into their
own sub-package.
For now, haiku.hpkg is declared to depend on haiku_datatranslators,
so that users will not suddenly update and have no translators.
In the future, this will be dropped.
Note that this is only done for the primary arch at present.
Secondary architecture translators remain in the main secondary package
for now.
Change-Id: Id0b352f34f7110b79ec7787792bf3ae0edab4054
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4477
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* This helps with creating a sysroot, otherwise extracted package
links refer to /system, which is outside of the sysroot.
* Should have no functional impact on Haiku, as these are already
symlinks
Change-Id: I29f719dc2c0839dd090e7f33eea0b8f98e0d6355
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4218
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* virtio_mmio for riscv64,arm,arm64
* enable new FDT bus for riscv64,arm,arm64
Change-Id: I5141de4e0bfcb44c5368dfafdf68ebf06ca5fb93
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4063
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Change-Id: I854de44c1b31066dfa522b946cb04a5190f6b0b6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4113
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Change-Id: I7bf7d5dac5bb576f9ca5fc55680fc369556f4312
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4044
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Once change 2342 is in place (running first boot scripts exported from
packages), see https://review.haiku-os.org/c/haiku/+/2342,
remove data/system/boot/post_install/add_catalog_entry_attributes.sh
and related support infrastructure (magic files, launch_roster entries).
The work this script did can in fact be done at image creation time
instead of at first boot.
Change-Id: I485e1a0a87c3e6a6ba3f882e65996f2327134d37
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3751
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
These will be added to the _devel packages so that other applications can link
to them.
Change-Id: If3fd231869823b42d6d896c6c9eb7a95c5fe715d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3666
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Jam comparison logic is string-based, and so was detecting GCC >= 10
as being < 2. This rectifies that by removing the GCC version parsing
from Jam logic entirely, and setting various BuildConfig variables
instead.
Change-Id: I0c0ae3b9002fb5e77f9ca7a78600c91871657f03
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3293
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Remove the InstallerInitScript (it does nothing) and the
InstallerFinishScript (it does too many things). Instead implement the
finishing directly in Installer. Separate writing the bootsector, so
that the "write bootsector" menu writes only the bootsector.
Fixes#16303
This is the partitioning system used on sparc machines.
Confirmed working with a Solaris install iso image.
Added to the haiku package for sparc and to haiku_extras for other
architectures.
Fixes#15638
Change-Id: I0584bef5e6a66eff9a33eb6675d5533cc9a45d1e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2709
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Add a link to the Quick Tour to the desktop.
* Remove the Welcome page from desktop. We don't want to clutter
the user's desktop more than necessary. As "Home" page of
WebPositive, it's still very visible.
* Mention the Quick Tour in the Welcome package description.
* Add a "quicktour" script similar to the welcome/userguide
that opens the online version if it's not installed locally.
* Add icons to the userguide and quicktour scripts. Fixes#14706.
* Add bookmark and launcher for the Quick Tour.
Adjust the AddFileDataAttributeRule to create its temporary file in
the "common" architecture, the file is not architecture specific.
Add a rule PrepareScriptWithIcon in src/data/bin/Jamfile to assign
an icon and make the script executable.
Change-Id: Ia7604ff4715a5aaf9a645c1b3333a954d6a4dafc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1924
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Very simple for now, just reuses the Haiku one with some gradients
removed.
Add it to the haiku_extras package.
Change-Id: I41729ed65b147fed72bf56e7c5c89367b75563bb
Reviewed-on: https://review.haiku-os.org/c/1431
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
It has been unused since 2010, when the usb_port printer transport
was rewritten to use the USBKit.
Change-Id: I224e07fb35cd9696c07b8f22dd51d3c67d92e0a9
Reviewed-on: https://review.haiku-os.org/c/869
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
FreeBSD 12's net80211 layer contains only 2 small KPI breaks from FreeBSD 11,
so we can upgrade it, apply those 2 changes to the drivers which are affected
(as the changes are in some lesser-used functions), and then upgrade all drivers
one at a time.
