* Check the first argument for "help" as well. If given print a somewhat
helpful text. Consider this my excuse to close ticket #1883. :-)
* Track available and added optional packages and fail, if an optional package
is requested that doesn't exist. Closes ticket #3332.
* Check for duplicate build profile definitions and fail if encountered.
Closes ticket #3333.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29298 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added debugger commands to resolve usb_ids to pipes.
* Adjusted the physical memory allocator to be usable in a slimmed down mode
when running inside the kernel debugger.
* Implemented USB keyboard support for KDL through a kernel debugger add-on.
* Added kgetc() and made use of it where previously individual methods were used
to ensure that reading characters always goes through the kernel debugger
add-ons and the other methods.
This has some preconditions to meet though:
1) The keyboard must be in the boot protocol (currently the case but needs to
be revisited once we have a full usb_hid).
2) The keyboard must be attached to a UHCI root port (i.e. not use EHCI or OHCI,
also not through hubs unless those are USB 1.1).
3) the usb_hid driver has to be opened for this to work. This means that for the
time between initializing USB and when usb_hid is opened by the input_server
there is no keyboard support.
Also note that this has no way of detecting hot-plug, meaning that you can't
re-attach your USB keyboard from the hub to the root port once in KDL.
On the bright side of things, since this is a non-destructive mechanism it is
possible to enter and leave KDL without loosing the USB state.
Tested OK in QEMU, not tested on real hardware yet, will see in a few minutes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29291 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add attribute_overlay and write_overlay to the image/floppy instead.
* Mount a iso9660 boot volume with both write and attribute overlay for now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29261 a95241bf-73f2-0310-859d-f6bbb57e9c96
Therefore we switch to building a 2.88 floppy image in that case so it's at
least usable to build a bootable CD.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29211 a95241bf-73f2-0310-859d-f6bbb57e9c96
what we want.
* Remove some more temporary files/directories after the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29209 a95241bf-73f2-0310-859d-f6bbb57e9c96
clean yet. Provides a haiku-cd target and creates a bootable image using mkisofs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29203 a95241bf-73f2-0310-859d-f6bbb57e9c96
* When booting from an iso, mount the boot volume with the overlay layer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29202 a95241bf-73f2-0310-859d-f6bbb57e9c96
By default it now presents a relatively concise list of USB
devices found on the bus, with an optional -v flag to dump
exhaustive detail. It still also takes an optional device
parameter in case you only want information for a particular
device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29185 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also don't install the GCC2 package on a GCC4 based hybrid, as it's again not
usable without proper manual setup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29160 a95241bf-73f2-0310-859d-f6bbb57e9c96
These all work on pure GCC4 images as well because they do not use any of our
C++ APIs.
* Remove the GCC4 package from hybrid installs though, as it's not usable
without proper setup. Also the trick with rewriting the symlink obviously
doesn't work because symlinks are done way earlier than unzipping the optional
packages when building the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29158 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Enable -Werror on GCC4 builds as well (limited to the same selected targets).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29118 a95241bf-73f2-0310-859d-f6bbb57e9c96
and also comes with proper default includes.
* If installing GCC4 as part of a GCC2 based hybrid build, re-setup the gnupro
link that is overwritten by the GCC4 package.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29085 a95241bf-73f2-0310-859d-f6bbb57e9c96
installed either when building with GCC4 or when making a hybrid. Can be
installed separatly as well. Have fun :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29046 a95241bf-73f2-0310-859d-f6bbb57e9c96
include_next work properly with newer headers. GCC 4.3.2 has a <cstddef> in its
C++ headers for example that does an include_next of <stddef.h>. The latter is
located in the C headers. For this to work, the include directory for the C
headers needs to be specified later than the one of the C++ headers.
With that Haiku is now completely buildable with GCC 4.3.2.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28995 a95241bf-73f2-0310-859d-f6bbb57e9c96
the main() signature are not applied and do not generate errors when violated.
Our bootloader has a non-standard main() signature for example, which is of
course fine.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28983 a95241bf-73f2-0310-859d-f6bbb57e9c96
old invalid user listeners yet, though (ie. if a team dies).
* Implemented userland network monitor functions.
* Added a few notifications to the network stack, even though this part isn't
complete yet (especially notify_interface_changed()).
* Added optional debug output to the notifications module.
* Added the module to the image, it basically works now (tested).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28825 a95241bf-73f2-0310-859d-f6bbb57e9c96
UserBuildConfigRulePreImage, and UserBuildConfigRulePostImage which will be
invoked at different points in the build system execution. They can be
overridden in UserBuildConfig, thus allowing for executing user code at
those points.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28765 a95241bf-73f2-0310-859d-f6bbb57e9c96
It's getting annoying having to maintain so many identical driver lists... maybe those should be factored out in some way...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28654 a95241bf-73f2-0310-859d-f6bbb57e9c96
code duplication and will make maintaining it much easier.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28647 a95241bf-73f2-0310-859d-f6bbb57e9c96
* adjusted libtextencoding's Jamfile
* added libiconv.so to image
* added iconv headers to optional package Development (under 3rdparty)
* removed old private version of libiconv from textencoding
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28631 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Updated autoconf, automake, libtool, texinfo, flex, and bison to
their respectively current version. They are installed in /boot/common
now.
* Removed the /boot/home/config/bin/perl and /bin/m4 symlinks again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28582 a95241bf-73f2-0310-859d-f6bbb57e9c96
source and it works fine.)
* Updated WonderBrush package. The new version is compiled on Haiku and
improves the installation of the document mimetype (finally a more reliable
sniffer rule, thanks to Francois for helping me with this). The About window
is fixed to no longer use a hardcoded font file path. This version only runs
on Haiku, but it is fully unlocked! Next version with new features won't be.
Also comes with a new vector icon for the native document type.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28570 a95241bf-73f2-0310-859d-f6bbb57e9c96
redownloading the package.
* Added link "vlc" to "VLC media player" in /boot/common/bin to make it
easier on people launching VLC from the command line.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28558 a95241bf-73f2-0310-859d-f6bbb57e9c96
* While I was at it, I also removed the extra screen savers until Ryan fixed
the issue (bug #2339).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28547 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added GNU M4 1.4.12 package to the Development optional package.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28486 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Firefox -> 2.0.0.17, includes new HVIF icon
* VLC -> renamed VLC to "VLC media player" which is what the official name is
* Pe -> updated to most recent version (called it RC2) which includes a few
fixes and new HVIF icons for most of it's supported document types. Renamed
the application folder to "Pe" and removed the "Drag lpe here to install"
link. Renamed the application itself to "Pe".
Hope these changes are alright with everyone.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28485 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented a small app "checkfs" to check partitions and put it on the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28435 a95241bf-73f2-0310-859d-f6bbb57e9c96
installation has been relocated to /boot/common and socket support is
enabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28364 a95241bf-73f2-0310-859d-f6bbb57e9c96
the wrong Link actions were used (always the no-attributes-support ones
which remove the target first), for instance.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28304 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Refactored a User Guide style documentation from the previous Welcome
documentation. The Welcome documentation links to the User Guide, the
biggest difference is that there is now a separate contents page.
* Improvements to the text.
* Added Tracker-Add-ons page.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28211 a95241bf-73f2-0310-859d-f6bbb57e9c96
Make sure you rm generated/downloads/NetSurf.zip to get the new replicable one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28190 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented BGradient, BGradientLinear, BGradientRadial,
BGradientDiamond, BGradientConic and BGradientRadialFocus
new Interface Kit classes.
* Implemented all the (AGG-based) backend necessary in
the app_server to render gradients (Painter, DrawingEngine)
* app_server/View can convert a BGradient layout to screen
coordinates.
* Added BGradient methods of the Fill* methods in BView.
* Implemented a test app and added it to the image as a
demo.
* Adopted Icon-O-Matic and libs/icon in order to avoid
clashing with the new BGradient class. Re-use some
parts where possible.
Awesome work, Artur! Thanks a lot. Now a more modern
looking GUI has just become much easier to implement! :-)
TODO:
* Remove the need to have gradient type twice in the
app_server protocol.
* Refactor some parts of the patch to remove duplicated
code (Painter, DrawingEngine).
* Adopt the BPicture protocol to know about BGradients.
* Review some parts of the BArchivable implementation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28109 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added opengl to build be api headers
* define USES_BE_API for gen_matypes
this should fix the build for Linux which don't provide GL headers :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28050 a95241bf-73f2-0310-859d-f6bbb57e9c96
please let us know. Especially shutting down your system can potentially
change its behaviour (maybe even for the better, but maybe not :-)).
* Added the GCC2 KDL demangle module to the image by default.
* White space cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28020 a95241bf-73f2-0310-859d-f6bbb57e9c96
build. This is mostly complete, excepting BBufferConsumer's virtuals are not
yet implemented, and needs more testing to ensure that the encoded stream is
correctly read from the camera, though based off preliminary tests by Francois,
detection/publishing at least seems to work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27965 a95241bf-73f2-0310-859d-f6bbb57e9c96
copied to /boot/beos/documetation/welcome and a link to welcome.html
is placed on the Desktop. The mime_update.sh script makes sure that
the mime type of the html files is set. However, Firefox has a problem
when it is launched for the first time via double clicking an HTML
file. Apparently, it initializes some settings and relaunches itself,
which in turn makes it forget to open the file. A second problem is
annoying as well: When launching Firefox to display a local file,
it will always open a second window with the default web location.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27868 a95241bf-73f2-0310-859d-f6bbb57e9c96
HAIKU[_KERNEL]_WARNING_CCFLAGS.
* Added -Werror for various parts of the source tree for the gcc 2
build. Feel encouraged to add more.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27842 a95241bf-73f2-0310-859d-f6bbb57e9c96
various system information.
* Implemented retrieving some VM stats via this call.
* The VM now maintains a page fault counter, and sets system_info::page_faults
accordingly.
* Added a (pretty simple) "vmstat" command line app.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27597 a95241bf-73f2-0310-859d-f6bbb57e9c96
first remove the target and its attributes (if any). Before gcc would
just unlink it and leak the attributes, which could lead to later
mixups, if the file's inode ID was re-used. As reported by Rene this
improves the attribute mixup situation, but doesn't solve it
completely. So that status quo is still the same: When using the
generic attribute emulation one has to build from the scratch to be
sure all attributes are fine.
* Got rid of superfluous whitespace.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27385 a95241bf-73f2-0310-859d-f6bbb57e9c96
the revision failed using "svn info".
* While there is no official git tree, this should help those people using
svn over git.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26977 a95241bf-73f2-0310-859d-f6bbb57e9c96
architecture: for now, we do this on the lowest layer only, therefore all
requests are handled synchronously (ie. in the scheduler's thread).
* Instead of using the block_io module, scsi_disk (and scsi_cd) are now
exporting a device on their own, and use an I/O scheduler with an appropriate
DMA resource.
* There are still lots of TODOs, and it can easily panic - don't update if
you intend to demo Haiku.
* scsi_periph now only has an io() function that get an io_operation, instead
of the previous read/write functions, moved preferred CCB size from those
functions into the device registration.
* Changed all scsi_periph files to C++.
* scsi_cd ported, too, but untested.
* Removed block_io from image - it will be removed completely soon.
* Temporarily commented an ASSERT() in the ATA bus manager (in case you use
it); it's sometimes triggered by the code now, and I haven't yet looked into
the issue -- doesn't seem to harm, at least.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26828 a95241bf-73f2-0310-859d-f6bbb57e9c96
in Tracker add-ons folder with short cut (like done for Backgrounds). Untested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26739 a95241bf-73f2-0310-859d-f6bbb57e9c96
- For simplicity we'll force using only insn common to 020 to 060, mostly to avoid unimplemented floating point ops in the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26647 a95241bf-73f2-0310-859d-f6bbb57e9c96
the scheme that Ingo started and thus installs the license and copyright to the right
places.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26603 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add cygwin specific options.
* Cygwin cannot handle -fPIC option and throws warnings, thus we only use it on non windows platforms for the host tools.
* Windows uses PATH instead of LD_LIBRARY_PATH, so before calling a host tool this environment variable needs to be expanded... Brilliant...
* Using jam on Windows is kind of complicated, as the cygwin included gcc creates executables with a .exe extension. When jam parses dependencies for being up to date it ignores this extension again and tries to rebuild the executables again and again. This hack removes the extension after successful linking. Though jam has a SUFEXE variable for cygwin builds, we cannot use this one directly as crosscompiled targets do not have an extension, it is complicated to use the same jam for both platforms. A more clean attempt would be to check for the extension on each host target depending on the platform. This should be fixed later on.
* Btw. Say hello to Haiku compiling successfully on Windows :) with one patch to be discussed for jam...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26590 a95241bf-73f2-0310-859d-f6bbb57e9c96
be used to update an installation without erasing the whole volume (ie. it
works like install-haiku on BFS capable platforms).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26435 a95241bf-73f2-0310-859d-f6bbb57e9c96
straight all-static build, with only OpenSSL as dependency. Be sure to include
OpenSSH (and set a hostname) if you intend to use svn+ssh. Should work with
svn, svn+ssh, http and https. Feel free to replace with a proper dynamically
linked version once available.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26158 a95241bf-73f2-0310-859d-f6bbb57e9c96
screen mode from the command line.
* With its "--fall-back" parameter, it's also thought to be called from BWindow
when a specific shortcut has been pressed (similar to screenshots) - this
part is not implemented yet. Anyone against <Command><Control>-<Escape>?
* Added it to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26150 a95241bf-73f2-0310-859d-f6bbb57e9c96
include the OSS media add-on (node), since Haiku comes with it's own
version. Therefor you can now add the OpenSound optional package and
it will just work out of the box, unless you have native drivers that
fight over the hardware with OSS. It is no longer necessary to delete
the opensound.media_addon from the home/config/add-ons/media folder.
If you don't build from scratch, make sure you delete
generated/download/OpenSound.zip or the change won't take effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26064 a95241bf-73f2-0310-859d-f6bbb57e9c96
less.
* Added /etc/vim/vimrc. Besides fixing key mappings it also disables
compatibility mode and adjusts some settings to make using vi a more
pleasant experience.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26028 a95241bf-73f2-0310-859d-f6bbb57e9c96
Temporarily removed the VESA driver, as long as it only builds on x86.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25913 a95241bf-73f2-0310-859d-f6bbb57e9c96
controller. The device doesn't use the PCI_ide subclass (but
PCI_mass_storage_other) and requires not using compatibility mode. Otherwise
it's pretty much the generic_ide_pci driver.
* Directly adding the driver to the image.
This driver could either be merged into the generic ide driver so it supports
not quite standard devices, or this could be made into a driver that collects
all those non standard devices. Either way, this works for now and lets my
machine boot off the IDE drive :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25868 a95241bf-73f2-0310-859d-f6bbb57e9c96
should make default images bootable from USB automatically. DDing one to a
USB stick should work out of the box then (but this wipes the stick of course).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25836 a95241bf-73f2-0310-859d-f6bbb57e9c96
-nostdlib disables that for executables although it should be enabled by
default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25785 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Minor cleanup of ide_isa, and generic_ide_pci (removed wrapper.h).
* Added ide_isa back to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25755 a95241bf-73f2-0310-859d-f6bbb57e9c96
either, it just hangs there trying ot connect and eventually times out.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25751 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added legacy_sata and scsi_cd back to the image.
* Minor cleanup in scsi_disk.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25739 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed scsi_dsk to scsi_disk.
* Joined all scsi_disk sources together to a single scsi_disk.cpp file.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25737 a95241bf-73f2-0310-859d-f6bbb57e9c96
packages. Print an error message for unavailable packages.
* Detect the build of a GCC2/GCC4 hybrid image and install GCC2 packages
on a GCC4 build where no GCC4 package is available. I did not test
every GGC2 package on a GCC4 build, though I have not found any that
does not work. If a package gives problems, feel free to disable it
for the hybrid build or send me a note.
* Add new optional package for Beam. Though I could not test it since,
SATA AHCI does not work for me ATM. I know that Beam 1.1 for BONE is
unable to retrieve mails (times out). Maybe the R5 version has better
luck, will check later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25695 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed std_ops(), as it wasn't used for anything, and is optional in Haiku.
* ide_isa, and legacy_sata are still waiting for the same set of changes :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25678 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved devfs from fs/ to device_manager/, and separated the legacy driver
support from it.
* Removed fast_log module.
* There are a couple of (temporary) regressions, though:
- legacy SATA and ISA IDE support is disabled, the drivers haven't been
ported yet.
- The not yet used ATA bus manager hasn't been ported yet, either.
- AHCI changes have not been tested.
- the listdev command has been removed from the build (as it currently
doesn't work anymore).
- device manager generated IDs currently are not freed anymore when a device
node is removed.
- generic drivers can't yet use the new driver architecture.
- simple busses that do not support device types won't work yet.
- legacy driver publishing/unpublishing (ie. what USB needs) has not been
tested, and may be broken.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25662 a95241bf-73f2-0310-859d-f6bbb57e9c96
Gerald Zajac. Thanks a lot!
* Also put it on the image by default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25583 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the pthread_cond_t internals public. This is necessary to support
process shared condition variables. Fixed initializer macro.
* Made the pthread_rwlockattr_t structure opaque.
* pthread_t is no longer typedef'ed to int. It's the pointer to the
internal _pthread_thread structure.
* Removed __get_pthread(). pthread_self() can be used instead.
* No longer tunnel the pthread exit value through Haiku's thread exit
value. We do have a separate field in the _pthread_thread structure
for it, now.
* Handle detaching of threads correctly.
* pthread_rwlockattr_{g,s}etpshared() use the
PTHREAD_PROCESS_{SHARED,PRIVATE} constants, now.
* Commented out yet unsupported structures (barriers, spinlocks).
* Rebuilt APR optional package. The pthread changes weren't binary
compatible.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25582 a95241bf-73f2-0310-859d-f6bbb57e9c96
* made the output easier to observe
* added the sigsuspend_6-1 test to the package
* made the fork_3-1 test return when it fails
* added output to the pthread_once tests
* other minor cosmetic changes
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25567 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointer also contains the toggle carry and the halt bit (which was obviously
always set as the endpoint had an error) the address comparison failed and
the head was dead in the water with all further transfers timing out until
a subsequet cancel cleaned the mess up again.
* Add the OHCI host controller driver to the image as it should now be fully
functional except for isochronous transfers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25565 a95241bf-73f2-0310-859d-f6bbb57e9c96
4). One has to have a (fully configured) "generated" directory for the
alternative gcc and specify it using the new option
"--alternative-gcc-output-dir" when configuring the main build.
Additionally the build variable HAIKU_ADD_ALTERNATIVE_GCC_LIBS has to be
set to "1".
If that has been done, when building the image a sub-jam is invoked that
generates the alternative libs and zips them. The main-jam unzips them
into the correct directory in the image. Note that the JAM build
variable has to be set when using a jam executable not invoked by "jam".
Tested with gcc 2 NetPositive, Pe, and FireFox under gcc 4 Haiku, and
with a few of the standard gcc 4 Haiku apps under gcc 2 Haiku. Seems to
work fine so far.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25536 a95241bf-73f2-0310-859d-f6bbb57e9c96
the targets/symlinks added to a container/Haiku image directory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25535 a95241bf-73f2-0310-859d-f6bbb57e9c96
Added a new command line utility "mkfs" which can initialize a given volume
with a file system by it's short name via the new Disk Device API.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25491 a95241bf-73f2-0310-859d-f6bbb57e9c96
