* Refactors so that we look for a codec subsystem ID, then the
Audio Function Group subsystem ID if not found.
* Moves the order around a bit so that the quirks are set early
enough.
* Also adds a quirk for MacBookAir 6,2, allows speakers to work.
Change-Id: I4c64f96936a82a5d7187d86d8558f28516fd4ecb
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4654
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
We still do not know if the accelerant buffers are graphics memory or not,
but in my testing (on the VESA driver), the only time I could get _CopyRect
to be called was where the buffer was in fact not graphics memory.
So that should provide a performance improvement there.
On the other end of things, this should resolve unaligned video memory
access problems on RISCV, and potentially other platforms, as gfxcpy32
did not attempt to align pointers; it should also improve performance
as memcpy will usually be faster than our custom gfxcpy here.
Most of this code has not been touched since 2006 or so.
Change-Id: I40b0345c5d47f2b45acafb14f03fd3a24d2042a8
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4315
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
It just causes confusion and is wrong in the case where double buffering
status changed during the object lifetime.
Change-Id: Ia1a9ae3f5a1b1b7d521b79c7d1c7be92cef60a06
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4633
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
libtermcap was deprecated in favor of terminfo in 2013; the library was
removed then, and this file was only left because not all optional
packages had yet been rebuilt against ncurses. Well, that has now
long been completed, and indeed all applications continue to function
even after removing /etc/termcap.
In case any legacy applications that I have missed still do need it,
it should be provided by HaikuPorts and not Haiku itself.
These are better here than in my bash history...
Change-Id: Iab8940f4efed950e26a8bad29cb8954464270e8f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4645
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
On Sparc Openboot, we get allocated a stack of only 8 kilobytes, and
each called function costs at least 176 bytes for the stack frame.
This means we need to be more careful than usual about stack usage. Move
some large-ish allocations off the stack by either making them static,
or allocated dynamically.
Add a compiler flag to error on functions which use too much stack. The
threshold is at 1023 bytes, because that's what allowed me to find the
two functions that were causing a stack overflow (open_from and
_ParseActivatedPackagesFile)
Change-Id: Ia0d13a9247e1a3fff4ce654bdffd6edb16e7cbc7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2371
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
These are helper functions for long double math. On sparc there is no
hardware implementation of long double instructions, and the ABI defines
these methods which must be part of the C library. GCC calls the methods
directly in its generated code.
They were already added to libroot, but they also need to be in the
stub, which is used during bootstrapping to link mpfr (during the
target gcc build).
I put these in a separate file because I assume the generation of the
stubs file from the real libroot.so will usually not be run on sparc,
and will not include these symbols otherwise. This may become a problem
if libroot for different architectures starts to diverge further.
Change-Id: I6070394c685fee35b3dc12a507f5a6271571b993
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4636
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This way it becomes much easier to write multiple console implementations
in one bootloader.
Tested for bios_ia32 and efi.
Change-Id: I67134f5c3de109b15d46898864ba7f51c6592afc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4642
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Most importantly include zstd, which is a new requirement for the
bootstrap build.
Change-Id: I981401e7d70fb7e1befaf7fc37f2fddc6d7e327d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4635
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This is an internal ICU library, used by their command line tools only.
libbe (or anything in Haiku sources) does not need to link to it.
Change-Id: Id322572c6833c225d5501a7e9520dd3dc82934f8
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4634
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Delete dropped out networks.
* Add in newly discovered networks.
* Add static (aka class) compare method to WirelessNetworkMenuItem
that is used to sort items by signal strength descending.
Add == operator to wireless_network struct to determine if
existing items have a known network attached.
Remove the non-network items from the menu, save them, sort
network menu items, then add non-network items back into the
menu.
Update NetworkStatus preflet to use same compare method as Network
preflet. signal_strength_compare function had a bool return value
instead of int which worked to sort items the first time, but does
not work on successive compares.
By not deleting and recreating the menu items each Pulse(),
the Network preflet no longer crashes on update. The menu flashes
on update still but doesn't crash.
Fixes#12024
Change-Id: Ie5b22cea4e66350b9c5df8e3b8de266ede50ad6d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4243
Reviewed-by: John Scipione <jscipione@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
... methods which call the respective methods in BList.
These convinience methods allow you to sort a menu of menu items
via a compare function, swap two menu items, or move a menu item
to a new index. Update items layout if menu is open.
Previously there was no easy way to rearrange menu items in a menu.
Change-Id: Ice3d6e5404e895196d8bd32d696dce7c55bd72d4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4296
Reviewed-by: John Scipione <jscipione@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
The other Atheros drivers are "atheros813x" and "atheroswifi",
so renaming this one (which is the oldest of the set) to match
the other two makes sense.
This is the driver for Intel's new line of desktop-class ethernet
controllers, from FreeBSD. Not yet included in the builds as it
is untested.
Part of #17212.
Now that there is also a "tap" driver in here, and the WiFi drivers
are also in a subdirectory, moving the physical ethernet device drivers
to a subdirectory also makes sense.
(Briefly) discussed on the mailing lists.
This cuts out almost 40,000 lines of these headers. (I did something similar
in the atheroswifi AR93xx/94xx driver when importing it from FreeBSD,
which had a lot more than 40,000 lines.)
The code in this module was derived from the one in driver/tty. However,
the driver uses a shared lock between the master and slave side of a
TTY, and this was changed to use two separate locks. The approach with
two locks does not work. It seems the change was unfinished and the
second TTY was never locked. But attempting to lock it will result in
lock inversion problems, unless we do complicated things (try to find
which of the two TTY is the master side, and lock that first, for
example). It is simpler to restore the shared lock as used in the
driver.
To set up the shared lock, I modified the tty_create function to take a
pointer to the master TTY when creating the slave. Maybe it makes more
sense to create both sides in the same call, create_tty_pair?
However, this does not work as easily as I wanted, because there is some
recursion going on: at least in one case, the tty_control function is
calling the driver's tty_service function, which in turns attempts to
call back into tty_control for the "other side" TTY. To handle this
case, replace the mutex with a recursive_lock.
Fixes#17091, where the root problem was access to
other_tty->select_pool without locking. This was also made unconvenient
to debug because select_pool objects are self-deleting, when the last
item in the pool is removed. As a result, the code accessing it without
log would suddenly find out that the data it was accessing had been
freed and erased.
This also makes the TTY code in driver/tty and generic/tty a bit more
similar than it was before, and brings us one step closer to merging the
two together. There are still two main differences and I don't know
enough about TTY to decide if they are important, and which version
should be kept:
- The driver has extra code for "background" read and write. I don't
know what this is used for.
- The driver has a single "settings" instance shared by a master and
slave TTY, while the module has two separate instances, but seems to
copy one to the other. I'm not sure which approach is correct.
Change-Id: Ie2daddd027859ce32ba395af76b4f109f8b984b0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4604
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
There is no need to construct and destruct nested objects. The new and
delete calls on the struct will take care of it. However, some fields
have C functions for construction/destruction and these should be
called.
Change-Id: I09d5930f499ef3fa4ff580d482c682172b00b6a3
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4603
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Suggested by axeld on the mailing list a while back.
strlcpy/strlcat NULL-terminate within the passed buffer size,
so we have no need to subtract 1 here.
