Use BDateTimeFormat, BDateFormat, and BNumberFormat for
various date, time, decimal, and percent formatting.
Change-Id: I994563d207db8bd28342ca6543b69a356ced38af
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7505
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Otherwise we could cause leaks.
Most of the time this check should be optimized out,
as most uses of AutoDeleter don't invoke SetTo. But
it would have caught some bugs in the VFS refactors
(which wound up being cancelled out by later commits
anyway, but this would've exposed them.)
Just invoke debugger(), which calls the kernel
debugger when compiled in kernel mode. And define
debugger() inline in this header if OS.h is not
included to avoid namespace pollution.
It's not used for anything by the OS but userspace might want
to use it for its own purposes.
Change-Id: Icda4bcd6de9d68596555e81293c8bd075f80a2a4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7511
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This is no-op for 32 bit platforms because `int32` is defined as `long` there.
Change interrupt vector number from 64 bits to 32 bits for 64 bit platforms.
Change-Id: I52d1ad616cab16488804e9733c7afaf772a670ba
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7507
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Also increase MSI message data size to 32 bits according to PCIe spec.
Remove 0xff check for MSI interrupts because it is potentially valid
interrupt vector number. Reject 0xff only for legacy pin interrupts.
- MSI-X supports up to 2048 interrupts per device that do not fit to
`uint8`.
- Non-x86 systems may use separate interrupt vector ranges for
hard-wired interrupts and MSI interrupts so `uint8` is not enough to
represent all of them.
Change-Id: Iaf9ffb197ec23db0f97ffe3ea756d28d7bfc8705
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7433
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
BSpinner had its own fValue defined instead of using the one from
BControl. This results in the be:value in the message sent when the
control is invoked to always be 0.
Change-Id: I1cff5f30adbf5b1dede57a14377cd4e1db7a30d3
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7428
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
by default, AdapterIO is initialized with a BMallocIO object, which will
be extended indefinitely. Flushing regularly is necessary to avoid
excessive memory usage. Tested in StreamRadio.
Change-Id: I9f3142c0a2300ad44dc54ccf6932d41c9526320b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7302
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
sample for qemu: -device virtio-vga,edid=on,xres=1024,yres=768 -display sdl
display mode can be set in the Screen preferences.
Change-Id: If1d6aeecb208ce7c62c42eea1a95c71237c4375a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7038
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
some laptops decide to not charge a fast full battery to not consume a cycle.
In this discharging state, the current rate is zero, thus no time left can be computed.
We add a state "Not charging" to clearly differentiate and avoid user confusion.
PowerStatus was triggering low battery notifications, this is also fixed.
Change-Id: I4745c78eb0863ab01fe34cb065707d068cff0f0e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7300
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
After this change `POKE_UNMAP_MEMORY` ioctl will became redurant and
an alias for `delete_area()`. Areas will be automatically deleted
on team exit.
Change-Id: I336b49c2281abf064e1bf28d908c7b2c5afd4df0
* Rename the "tun" network device to "tunnel". FreeBSD calls theirs
"tuntap" but speaks of both TUN and TAP devices as interfaces for
tunnels. The other BSDs seem to do likewise.
* Fold the "tun" driver into the "tunnel" network device. The
network device now publishes entries in devfs when interfaces
are created, and unpublishes them when interfaces are destroyed.
This removes the need for the driver and device to communicate
through a file descriptor, and thus allows the receive queue
to be totally eliminated, massively simplifying that logic.
* Use standard net-stack FIFOs instead of TCP BufferQueue, which is
specialized to TCP's needs in far too many ways. Thanks to the
previous commit adding support for interrupting semaphore waits,
we can use the FIFO wait mechanisms, too.
* Restructure the TAP logic, and generate MAC addresses more like
Linux does.
* Actually set type = IFT_TUN, and use the "loopback" frame handler
instead of the "ethernet" frame handler. This allows significant
cleanup of the header handling logic.
* In TUN mode, reject packets that don't look like IP packets.
* Delete "tunconfig"; it was mostly stubs and is now unnecessary.
TUN mode tested and confirmed as working by kallisti5 with OpenVPN.
TAP mode partially tested, but not yet confirmed as working.
Fixes#18673.
Change-Id: Ibd803139474e8db556a4f567901da15ee4083621
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7143
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
These have not been used in years (maybe since the redesign of the
network stack?). Only socket_writev had an implementation, which was
mostly just an incomplete version of socket_send.
Scatter/gather I/O is already supported via msghdr's msg_iov/len fields,
so this is redundant anyway.
Change-Id: If41c4f4ee021856f6db49c7cb95422a9c1aa7700
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7127
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Change-Id: Idf7ab6d2aa2b4f8cb4893053b531d2eae7418427
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6608
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Improve the mechanics for JSON parsing by reusing
text buffers during the parse.
Change-Id: I7fb2cae31e6558a5a0c63fd02e1fc6fec4f9e4b3
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7106
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
after a0131eaae2884fdced27158c3d34732d1656aca9 mxcsr was possibly also incorrect.
fpu control and mxcsr will be restored with fxrstor/xrstor.
no need to clear pending exceptions on #MF
fix#18656 (and #18624 after reverting).
Change-Id: I7dd5e2e4610747c5b82abd6c67e302d264b4be92
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7104
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* also on x86 for simplicity.
* fixes#18624
* also makes x87 FPU data registers available for x87 floating instructions. EMMS is cheap.
see 25209d81f7
Change-Id: I5c1b399377102f3eb10bc6d7f7247afbaf6d8483
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7089
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
* Declare databridge buffer lengths in LocaleBackend.
* Use strcpy instead of strlcpy when writing to databridge buffers
(this is the first fix for #18598.)
* Check for overflows and error out when they happen.
* Verify that ICU actually knows the timezone in question
and fall back to GMT if it does not (this would also fix that crash.)
Fixes#18598.
While debugging some problems on the HaikuPorts build VMs, mmlr
noticed their clocks had an alarming amount of drift. This prompted
an investigation into TSC calibration mechanisms, and the discovery
that there is a VM-specific one which we did not implement.
This mechanism is more accurate than counting cycles on VMs where
cycles can be "stolen" (the probable cause of the aforementioned
clock drift.)
Tested in VMware (works out of the box) and on QEMU/KVM
(may need TSC frequency specified or a host with invariant TSC.)
Change-Id: I4ccfdb2e4e2621404ec9026e7106c02bf96faf18
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7063
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Solves a few "Unknown connector" errors on newer cards.
* It's just another physical name for DisplayPort
Change-Id: I37a6f1bb1db66279b305bdbce3c200612eac1130
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7042
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
This undoes fc7864091e.
It was only ever used by the FreeBSD compatibility layer,
only supported one structure, and created problems with
concurrent builds.
Fixes some PTE concurrent access bugs.
Change-Id: I09ec56861fae389a8a3e228b17a3921b85202c8b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6949
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
This switches the application over from using basic
authentication to using token-based authentication in
preparation for later using Open-ID based
authentication flows. The application version is also
bumped in order that the server can detect this version
at some later date in the future when it no longer
supports basic authentication itself.
Change-Id: I7addde1d57503c58d6bcd54908f22f66830c0c59
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6944
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
* Replace count_low/count_high with bigtime_t fields plus an int32.
sizeof(spinlock) is now 32 bytes with the debug option enabled.
* Adjust and clean up all spinlock code to use the new fields.
* Fold DEBUG_SPINLOCK_LATENCIES into the new code. Remove the bootloader
option and other flags for it (these were not compiled in by default.)
The new code should be much easier to understand and also more powerful.
However, the information transmitted to userland isn't as useful now;
the KDL command output will have the interesting information.
(Things could be reworked to transmit more interesting information to
userland again if desired, but as this code clearly hadn't been compiled
for many years, as it referred to global spinlocks that have been gone
for a very long time.)
Change-Id: I2cb34078bfdc7604f288a297b6cd1aa7ff9cc512
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6943
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Only the x86 and PPC implementations look like they would have worked,
while the builtin is available and will work across all architectures.
We already use it unconditionally in some parts of libroot.
Change-Id: I2dffb3b2c7cdd605092382b9d649151adb921bb4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6942
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
BSlowContextPopup was mostly a duplicate class of BNavMenu
only on top of BPopUpMenu instead of BMenu. Now, BPopUpNavMenu
just subclasses BNavMenu and adds the few features of BPopUpMenu
neccessary.
Drag-and-drop of files using the pop-up nav menu seems to still work fine.
Change-Id: Ic1f49c5bed60fff7a3076a22f74aebc6eba51d57
on x86_64 implemented with rdtscp or rdpid, generically with a syscall.
Change-Id: I8f776848bf35575abec8a8c612c4a25d8550daea
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6866
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Implemented `UnixBufferQueue::SetCapacity` so that `setsockopt`
with `SO_RCVBUF` will not always return an error.
Change-Id: I2d9be84633f84474fac64b379e9f89ef2751a094
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6816
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
* Check fFirst/fLast instead of previous/next. Avoids
list corruption when trying to remove already-removed
elements, instead will cause null-dereference KDL.
* Always set next/previous to NULL even when DEBUG is not
enabled.
Based on hamishm's original patch from 2015, but heavily modified,
refactored, and reworked.
From the original commit message:
> When an object is deleted, a B_EVENT_INVALID event is delivered,
> and the object is unregistered from the queue.
>
> The special event flag B_EVENT_ONE_SHOT can be passed in when adding
> an object so that the object is automatically unregistered when an
> event is delivered.
Modifications to the original change include:
* Removed the public interface (syscalls remain private for the moment)
* Event list queueing/dequeueing almost entirely rewritten, including:
- Clear events field when dequeueing.
- Have B_EVENT_QUEUED actually indicate whether the event has been
appended to the linked list (or not), based around lock state.
The previous logic was prone to races and double-insertions.
- "Modify" is now just "Deselect + Select" performed at once;
previously it could cause use-after-frees.
- Unlock for deselect only once at the end of dequeue.
- Handle INVALID events still in the queue upon destruction,
fixing memory leaks.
* Deduplified code with wait_for_objects.
* Use of C++ virtual dispatch instead of C-style enum + function calls,
and BReferenceable plus destructors for teardown.
* Removed select/modify/delete flags. Select/Modify are now the same
operation on the syscall interface, and "Delete" is done when 0
is passed for "events". Additionally, the events selected can be fetched
by passing -1 for "events".
* Implemented level-triggered mode.
* Use of BStackOrHeapArray and other convenience routines in syscalls.
Change-Id: I1d2f094fd981c95215a59adbc087523c7bbbe40b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6745
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
