This switches to a new API format "v2" being introduced
on HDS. The version of the application is also bumped
at the same time in order to make a later cut-off point
possible for compatibility.
Change-Id: I577fd143ac9d001171bca7213c82e3280af1c4de
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4217
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
The APIs for this were introduced in ICU 63, so we'll need an update.
ICU 63 does not build with gcc2, so this method is disabled there.
Change-Id: Iabe49509ed6d4e578560d497d3ca336a97db4625
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1874
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Fixes:
* scsi: Fix a bug that caused the device capacity to be set
to an undefined value for some large SCSI devices when
READ CAPACITY (16) was used
* ahci: Fix VPD page reporting so that it does not return
undefined values
* ahci: Set the write bit to true when sending a DATA SET
MANAGEMENT (trim) command to a device. The command would
otherwise fail and time out on some devices.
Improvements:
* scsi: Extend the READ CAPACITY (16) support to also
include logical block provisioning information
* scsi: Prefer READ CAPACITY (16) over READ CAPACITY (10)
on devices that are expected to support this command
* scsi, ahci: Enable trim on SCSI and SATA devices that
are expected to support trim and which correctly report
trim support
* ahci: Redo the implementation of the SCSI UNMAP command
* scsi: Redo UNMAP-related code
* scsi: Add support for UNMAP via WRITE SAME (10) and
WRITE SAME (16) commands
* When copying trim ranges between different data types,
make sure that the values don't change (detect overflows)
* Report the number of trimmed blocks even if the trim
operation fails
Change-Id: Ie5fc993bbbc19546b4308138ba10184bf7b9986a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4157
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Fixes:
* Use uint64 instead of off_t when handling offset and size
of the trimmed range in the fs_trim_data structure
* BlockAllocator::Trim: Correct the size of a buffer
* ram_disk, mmc: Do not trim past device capacity
Improvements:
* BlockAllocator::Trim: Because the received offset and size
are ignored by BFS (the functionality is not implemented yet),
return B_UNSUPPORTED if the range does not cover the whole
partition
* ram_disk, mmc: More accurate calculation of the number
of trimmed bytes
* devfs: Add a uint64 version of translate_partition_access()
Change-Id: I24f4c08674f123ad33a5fef6e28996a4ada6ff0d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4155
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
HTTP errors can have some content sent with them (a message to display
to the user, usually). The package kit would not ignore this and append
the content to the end of the downloaded file. This could result in a
file larger than the expected size, and in that case, it would keep
growing infinitely by adding more error messages to it.
Also add some more specific error messages for some HTTP codes, in
particular, "invalid range" which is likely to happen if something goes
wrong with range requests. Now this case will be detected and the
download will stop.
Change-Id: I18927f361235e9f72a5701c1bd7977abda9e21ad
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4210
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Integer overflow caused bitmap buffer creation of wrong size and out of
bounds access when large bitmap was created. Now allocation failure is
reported for large bitmaps.
This prevents app_server from crashing while playing YouTube in WebPositive.
Fixes#16489.
Change-Id: I297aa6e3b79b32a486d297f1239a1fd4397a8a36
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4209
Reviewed-by: Sergei Reznikov <diver@gelios.net>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
This update will mean that HaikuDepot is able to detect
install / uninstall actions on packages at the system
level and reflect this in the user interface.
Fixes#15879, #15994 and #15046.
Relates to #11674.
Also cleans up disused code in the WorkStatusView.
Change-Id: Ide2d5d93c2f71915bc7cfe7d3628e5f343e43f35
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4145
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Improvements:
* Introduce new command-line parameters for the offset and length
of the trimmed region
* Introduce a new command-line parameter that must be specified
in order to trim a block/character device instead of a file system
* By default, warn users that trim can potentially destroy data
* Display the number of bytes trimmed even if the ioctl returns
an error
Change-Id: I9eec535abe74f7ef09c927292a120016f4156684
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4154
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Check that the source and destination addresses in sg_memcpy
are not NULL. The absence of this check does not seem to
cause any issues, but I think it is safer to include it.
Change-Id: I2b04f94d5b04735fe9510adfb2400a7598b70bc4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4152
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
ICU's Locale::getDisplayName fills in the locale's name in the form
"language (country, variation)". We are interested in the country here.
Fixes#17081
Change-Id: Icb810dbe2c486d95251d4d06a48dfe3a000fa968
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4206
Reviewed-by: humdinger <humdingerb@gmail.com>
Pose::CalcRect() assumed top is at icon top in mini-icon mode. This
is not true for larger font sizes where the top of the text is above
the top of the icon. Calculate top and bottom based on font and icon
size matching the calculation in TextWidget::CalcRectCommon(). This
fixes a highlight redraw bug in mini icon mode at larger font sizes.
Push Edit name right 2px to match label position (in mini-icon mode.)
Round to integer to help with 1px off bug. Edit name box is still off
by 1px from the label for some font families and sizes.
Change-Id: Ibba897d6f3c7a879631adedada5cd59d2071191a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4204
Reviewed-by: John Scipione <jscipione@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Use glyph 0 when no glyph is found for a character in the current font
nor any of the fallbacks.
HasGlyphs has to bypass LayoutGlyphs because we want it to mark this
case as false, while still checking the fallbacks.
Change-Id: Ief8d9d53c91992c659922fb56b79be7172f4ab0d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4144
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
The unofficial builds used %Distroname% directly and showed that to the
users, which does not look great. Instead use different wording that
simply avoids mentionning the OS name in de-branded builds.
- Small lingustic change: "Try Haiku" sounds a bit less awkward than
"Try out Haiku" and conveys the same exact meaning.
- Updated copyright note.
Co-authored-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Change-Id: Ic1be6bc4728946c19fc4fd162cfeea640c1f6c1e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4036
Reviewed-by: Niels Sascha Reedijk <niels.reedijk@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
* Allows invoking build tools at the command line without having
to mess with the LD library path environment variables
* Does not change the use of HOST_ADD_BUILD_COMPATIBILITY_LIB_DIR
within the build itself
* Darwin currently excluded, as it uses a different method for
specifying rpath
Change-Id: I4db443f2b5824ee70ad44418251a9996c14663bc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4163
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Fixes the riscv64 build
* Should fix next_m68k loader (untested)
Change-Id: Ic9b2d4305302d28a9ca0c71f8e1e502c763162d9
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4199
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* platform_add_block_devices() is a no-op, as efi already
provides all devices to the generic loader code.
* remove iterator.Remove() in platform_get_boot_partitions()
as the simplified devices scan no longer duplicates
partition entries.
Fixes#17051
Change-Id: I38789b069e1be9b18312e2455bc91e6195114599
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4160
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* Makes the case where the loader and the install differ by
release type, so that the icons are rendered in the same
position
Change-Id: I01e48109ce127b202ce5e05544aa2d5a495ed53e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4162
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* Haiku now consumes right at 700 MiB on x86_gcc2h
after the webkit update.
Change-Id: Ia41a3e6252190e73feaa49ebe7c58ef4c80df4dc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4161
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
This patch fixes compilation errors on x86_64 when TRACE_DEVFS
is defined. Only format identifiers that caused compilation
errors are changed. Commented-out TRACE's are left unchanged.
Change-Id: I4e803920665eaac7fbc5cec2ffb7778c262bf9c0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4151
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
This also keeps the functionality of hrev53848, which simplifies the
list of disks searched for bootable partitions; however, it maintains
the previous behaviour of platform_get_boot_partitions that continues
to iterate over a list of possible boot partitions, which should
allow finding a bootable BFS partition better in more circumstances.
Particularly, there are numerous reports of the UEFI loader entering
the boot menu despite it finding a bootable partition, which this
should address.
EFI's device_contains_partition is also structured such that it
compares the disk GPT table of the partition the loader is
querying of the EFI disk's GPT table, in the case that there are
multiple disks, as the most reliable method of comparison, with
a generic fallback for non-GPT disks, which will be less reliable.
This reverts commit 0d932a49ad.
Change-Id: I5fac8608035d56b8bb4dc6c3d495ec6db42fa9b7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4149
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
We were incorrectly reporting a B_IO_ERROR for these requests because we
could not read the content after the headers. There is no content in
these cases.
Add an unit test for both HEAD and 204 status, checking that there is no
content and the headers are correct.
Fixes#16885.
Change-Id: I98fefc5c604253bb2545b50395b7af9f8834def0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4142
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Niels Sascha Reedijk <niels.reedijk@gmail.com>
Update the package server so that it reports the
added and removed packages when it commits a
change so that clients are able to pickup and
act on the changes without iterating over all of
the packages.
Change-Id: I6feb52c34fc51a78e2282d8d5ca6cb6775b221ca
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4141
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Screen may be turned off if video card is not supported by firmware and boot
loader.
Change-Id: Ie60fc00da281ec3781084dd97466a68b885fde7b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4114
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
- This will fix page translation fault when accessing
static variables.
- Now with this patch, we made uart pl011 works for qemu.
Change-Id: I8eecc18ad05bd950768b49d9ed268c4c2a3baf25
Signed-off-by: Han Pengfei <pengphei@qq.com>
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4123
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: X512 <danger_mail@list.ru>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
This patch adds the functionality to read B+Trees based files.
It shares similarity with extent based file reading functionality. Just
the way the extents are read is different.
Change-Id: I9b7ebe20171a8860fdc35024f7018540248aed61
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3170
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
EFI System Partition was the last remaining holdout for mtools usage.
Change-Id: I988f82a2f4318f2f90ec1efb80f7ff5c8908aff7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4140
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Nothing really refers to libunwind anywhere in Haiku, so it's likely as good as gone.
Change-Id: I1b9a2e23558caa46211c81618295361748344441
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4128
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
The code allowed execution to continue as soon as the "command inhibit"
bit was cleared. This is incorrect: we need to wait for a command result
(either command complete, or timeout) to be available before continuing.
This should fix#17031.
Change-Id: I8f3fe60c2e47582b399952b19c05c6ed2161afd7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4121
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Change-Id: I854de44c1b31066dfa522b946cb04a5190f6b0b6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4113
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
