Revert back start of kernel space to the usual place, no need to differ from other archs here.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32401 a95241bf-73f2-0310-859d-f6bbb57e9c96
Start of framebuffer initialization for the Verdex board.
For now it points to the data section as framebuffer for testing and shows an RGB pattern.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32352 a95241bf-73f2-0310-859d-f6bbb57e9c96
- moved board/ folder around again, it probably belongs only to kernel stuff,
- added board_config.h templates for gumstix boards.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32197 a95241bf-73f2-0310-859d-f6bbb57e9c96
ROUNDUP to use '*' and '/' -- the compiler will optimize that for powers of
two anyway and this implementation works for other numbers as well.
* The thread::fault_handler use in C[++] code was broken with gcc 4. At least
when other functions were invoked. Trying to trick the compiler wasn't a
particularly good idea anyway, since the next compiler version could break
the trick again. So the general policy is to use the fault handlers only in
assembly code where we have full control. Changed that for x86 (save for the
vm86 mode, which has a similar mechanism), but not for the other
architectures.
* Introduced fault_handler, fault_handler_stack_pointer, and fault_jump_buffer
fields in the cpu_ent structure, which must be used instead of
thread::fault_handler in the kernel debugger. Consequently user_memcpy() must
not be used in the kernel debugger either. Introduced a debug_memcpy()
instead.
* Introduced debug_call_with_fault_handler() function which calls a function
in a setjmp() and fault handler context. The architecture specific backend
arch_debug_call_with_fault_handler() has only been implemented for x86 yet.
* Introduced debug_is_kernel_memory_accessible() for use in the kernel
debugger. It determines whether a range of memory can be accessed in the
way specified. The architecture specific back end
arch_vm_translation_map_is_kernel_page_accessible() has only been implemented
for x86 yet.
* Added arch_debug_unset_current_thread() (only implemented for x86) to unset
the current thread pointer in the kernel debugger. When entering the kernel
debugger we do some basic sanity checks of the currently set thread structure
and unset it, if they fail. This allows certain commands (most importantly
the stack trace command) to avoid accessing the thread structure.
* x86: When handling a double fault, we do now install a special handler for
page faults. This allows us to gracefully catch faulting commands, even if
e.g. the thread structure is toast.
We are now in much better shape to deal with double faults. Hopefully avoiding
the triple faults that some people have been experiencing on their hardware
and ideally even allowing to use the kernel debugger normally.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32073 a95241bf-73f2-0310-859d-f6bbb57e9c96
* SMP:
- Added smp_send_broadcast_ici_interrupts_disabled(), which is basically
equivalent to smp_send_broadcast_ici(), but is only called with interrupts
disabled and gets the CPU index, so it doesn't have to use
smp_get_current_cpu() (which dereferences the current thread).
- Added cpu index parameter to smp_intercpu_int_handler().
* x86:
- arch_int.c -> arch_int.cpp
- Set up an IDT per CPU. We were using a single IDT for all CPUs, but that
can't work, since we need different tasks for the double fault interrupt
vector.
- Set the per CPU double fault task gates correctly.
- Renamed set_intr_gate() to set_interrupt_gate and set_system_gate() to
set_trap_gate() and documented them a bit.
- Renamed double_fault_exception() x86_double_fault_exception() and fixed
it not to use smp_get_current_cpu(). Instead we have the new
x86_double_fault_get_cpu() that deducts the CPU index from the used stack.
- Fixed the double_fault interrupt handler: It no longer calls int_bottom to
avoid accessing the current thread.
* debug.cpp:
- Introduced explicit debug_double_fault() to enter the kernel debugger from
a double fault handler.
- Avoid using smp_get_current_cpu().
- Don't use kprintf() before sDebuggerOnCPU is set. Otherwise
acquire_spinlock() is invoked by arch_debug_serial_puts().
Things look a bit better when the current thread pointer is broken -- we run
into kernel_debugger_loop() and successfully print the "Welcome to KDL"
message -- but we still dereference the thread pointer afterwards, so that we
don't get a usable kernel debugger yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32050 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added x86_double_fault_get_cpu(), a save way to get the CPU index when in
the double fault handler. smp_get_current_cpu() requires at least a somewhat
intact thread structure, so we rather want to avoid it when handling a double
fault. There are a lot more of those dependencies in the KDL entry code.
Working on it...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32028 a95241bf-73f2-0310-859d-f6bbb57e9c96
there are prefixed with the respective architecture name. Useful for remote
debugging a different architecture.
* <x86/arch_debugger.h>: Introduced a structure for the FPU state, so that it
isn't left to the debugger.
* Removed the _kern_get_thread_cpu_state() syscall. Was originally intended for
bdb compatiblity, but isn't really needed.
* Kernel x86 arch_get_debug_cpu_state(): The use of fnsave was broken, since
it reinits the FPU after saving the state. This resulted in weird results
when debugging functions using the FPU. We now use fxsave, if available.
Otherwise fnsave + frstor should be used -- not fully implemented yet.
Same for arch_set_debug_cpu_state().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31682 a95241bf-73f2-0310-859d-f6bbb57e9c96
is a syscall iframe.
* User debugger support: Don't to call BreakpointManager::PrepareToContinue(),
if the thread returns from a syscall. We don't want to skip breakpoints in
that case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31223 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The bulk of the work -- i.e. juggling the software and hardware breakpoints,
watchpoints, and memory reads/writes -- is done in the new class
BreakpointManager.
* For the architectures a few capability macros have to be defined, one
pointing to the software breakpoint instruction opcode. Done for x86.
* Some more simplifications in the user debugger code, made possible by the
recently introduced debugger_changed_condition attribute.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31214 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Generalized address checks. The debugger can now also read the commpage.
* Added new syscall _kern_get_thread_cpu_state() to get the CPU state of a
not running thread. Introduced arch_get_thread_debug_cpu_state() for that
purpose, which is only implemented for x86 ATM (uses the new
i386_get_thread_user_iframe()).
* Don't allow a debugger to change a thread's "esp" anymore. That's the esp
register in the kernel. "user_esp" can still be changed.
* Generally set RF (resume flag) in eflags in interrupt handlers, not only
after a instruction breakpoint debug exception. This should prevent
breakpoints from being triggered more than once (e.g. when the breakpoint is
on an instruction that can cause a page fault). I still saw those with bdb
in VMware, but that might be a VMware bug.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31045 a95241bf-73f2-0310-859d-f6bbb57e9c96
gcc could apparently assume that the register assigned to the one in the
clobber list would keep its value (as can be observed when disassembling
add_debugger_command_etc()).
Using a dummy output register works around the problem and also avoids the
unnecessary initialization of the register.
Comments explaining the mystery welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30909 a95241bf-73f2-0310-859d-f6bbb57e9c96
allowing optional prepending of a string to the symbol names.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30750 a95241bf-73f2-0310-859d-f6bbb57e9c96
will return consistent values. This helps with debug measurements for the time
being. Obviously we'll have to think of something different when we support
speed-stepping on models with frequency-dependent TSCs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30287 a95241bf-73f2-0310-859d-f6bbb57e9c96
(mostly at least). Also disables -Werror for the binutils, but those should
be fixed eventually.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29804 a95241bf-73f2-0310-859d-f6bbb57e9c96
This is not necessary, since userland teams' page directories also
contain the kernel mappings, and avoids unnecessary TLB flushes. To make
that possible the vm_translation_map_arch_info objects are reference
counted now.
This optimization reduces the kernel time of the Haiku build on my
machine with SMP disabled a few percent, but interestingly the total
time decreases only marginally. Haven't tested with SMP yet, but for
full impact CPU affinity would be needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28287 a95241bf-73f2-0310-859d-f6bbb57e9c96
added vm_memcpy_from_physical() and vm_memcpy_physical_page(), and
added respective functions to the vm_translation_map operations. The
architecture specific implementation can now decide how to implement
them most efficiently. Added generic implementations that can be used,
though.
* Changed vm_{get,put}_physical_page(). The former no longer accepts
flags (the only flag PHYSICAL_PAGE_DONT_WAIT wasn't needed anymore).
Instead it returns an implementation-specific handle that has to be
passed to the latter. Added vm_{get,put}_physical_page_current_cpu()
and *_debug() variants, that work only for the current CPU,
respectively when in the kernel debugger. Also adjusted the
vm_translation_map operations accordingly.
* Made consequent use of the physical memory operations in the source
tree.
* Also adjusted the m68k and ppc implementations with respect to the
vm_translation_map operation changes, but they are probably broken,
nevertheless.
* For x86 the generic physical page mapper isn't used anymore. It is
suboptimal in any case. For systems with small memory it is too much
overhead, since one can just map the complete physical memory (that's
not done yet, though). For systems with large memory it counteracts
the VM strategy to reuse the least recently used pages. Since those
pages will most likely not be mapped by the page mapper anymore, it
will keep remapping chunks. This was also the reason why building
Haiku in Haiku was significantly faster with only 256 MB RAM (since
that much could be kept mapped all the time).
Now we're using a different strategy: We have small pools of virtual
page slots per CPU that are used for the physical page operations
(memset_physical(), memcpy_*_physical()) with CPU-pinned thread.
Furthermore we have four slots per translation map, which are used to
map page tables.
These changes speed up the Haiku image build in Haiku significantly. On
my Core2 Duo 2.2 GHz 2 GB machine about 40% to 20 min 40 s (KDEBUG
disabled, block cache debug disabled). Still more than factor 3 slower
than FreeBSD and Linux, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28244 a95241bf-73f2-0310-859d-f6bbb57e9c96
- remove dead ppc code
- add support for probing hardware registers the way linux does (early, hook with VBR to trap faults)
- detect MFPs this way.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28031 a95241bf-73f2-0310-859d-f6bbb57e9c96
* memset() is now available through the commpage.
* CPU modules can provide a model-optimized memset().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27952 a95241bf-73f2-0310-859d-f6bbb57e9c96
arch_vm_aspace_swap().
* The x86 implementation does now maintain a bit mask per
vm_translation_map_arch_info indicating on which CPUs the address
space is active. This allows flush_tmap() to avoid ICI for user
address spaces when the team isn't currently running on any other CPU.
In this context ICI is relatively expensive, particularly since we map
most pages via vm_map_page() and therefore invoke flush_tmap() pretty
much for every single page.
This optimization speeds up a "hello world" compilation about 20% on
my machine (KDEBUG turned off, freshly booted), but interestingly it
has virtually no effect on the "-j2" haiku build time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27912 a95241bf-73f2-0310-859d-f6bbb57e9c96
many iframes are supposed to be skipped before recording the stack
trace. Currently implemented for x86 only.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27529 a95241bf-73f2-0310-859d-f6bbb57e9c96
be used now. Tested only with VMware so far.
* apm_shutdown() is now called with interrupts turned on.
* Renamed arch_cpu.c to arch_cpu.cpp.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27404 a95241bf-73f2-0310-859d-f6bbb57e9c96
referencing iframe registers. Their prefix is "$". E.g. "$eax" refers to
the eax register of the current iframe. The features cooperates with the
"in_context" command, i.e. "in_context 92 $eip = 0" will set the eip
register of thread 92 to 0 (thus sealing its fate ;-)).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27192 a95241bf-73f2-0310-859d-f6bbb57e9c96
PC of the innermost iframe.
* The "in_context" command does now set the currently debugged thread
respectively.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27166 a95241bf-73f2-0310-859d-f6bbb57e9c96
and size of the double fault stack.
* is_kernel_stack_address() does now also check whether the given
address is on the double fault stack. This fixes stack traces on
double faults, which were broken (i.e. went only to the double fault
iframe) since we started checking whether the addresses are on the
kernel stack at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26775 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Dumping the features as string is now a one time thing, that only happens
when DUMP_FEATURE_STRING is defined to 1.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26733 a95241bf-73f2-0310-859d-f6bbb57e9c96
- add 040 cpu and mmu stuff
- use leftover from the page root table to put interrupt vector table to set VBR to
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26627 a95241bf-73f2-0310-859d-f6bbb57e9c96
