that conveniently bridge BVolumes/mount points with BPartitions.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28346 a95241bf-73f2-0310-859d-f6bbb57e9c96
ide_mask_sector_count_48, and ide_mask_LBA_*_48 were all wrong.
* Using the high byte in LBA48 mode should work now, too (wasn't written
to the IDE controller before, but that shouldn't have been a problem yet with
today's disks).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28340 a95241bf-73f2-0310-859d-f6bbb57e9c96
This is not necessary, since userland teams' page directories also
contain the kernel mappings, and avoids unnecessary TLB flushes. To make
that possible the vm_translation_map_arch_info objects are reference
counted now.
This optimization reduces the kernel time of the Haiku build on my
machine with SMP disabled a few percent, but interestingly the total
time decreases only marginally. Haven't tested with SMP yet, but for
full impact CPU affinity would be needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28287 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added deferred_delete() that takes a DeferredDeletable and deletes it
asynchronously.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28285 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the password window to use this feel.
* Later, the screen saver itself should use this feel whenever the password
mode is enabled. The password window should then use a modal-app feel, but
this doesn't work yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28281 a95241bf-73f2-0310-859d-f6bbb57e9c96
scheduler_set_thread_priority(). Setting the thread priority was the
only situation in which it was used.
* Renamed scheduler.cpp to scheduler_simple.cpp.
* The scheduler functions are no longer called directly. Instead there's
an operation vector now, which is initialized at kernel init time.
This allows for picking the most suitable scheduler for the machine
(e.g. a non-SMP scheduler on a non-SMP machine).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28262 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a layout friendly constructor - it's not so nice to use, though, since
the original one already doesn't get a BRect (we just don't need the
resizing mode, and have to set the B_SUPPORTS_LAYOUT flag).
* Refactored size/frame computation a bit.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28258 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Turned the checks for all those macros to "#if"s instead of "#ifdef"s.
* Introduced macro KDEBUG_LEVEL which serves as a master setting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28248 a95241bf-73f2-0310-859d-f6bbb57e9c96
added vm_memcpy_from_physical() and vm_memcpy_physical_page(), and
added respective functions to the vm_translation_map operations. The
architecture specific implementation can now decide how to implement
them most efficiently. Added generic implementations that can be used,
though.
* Changed vm_{get,put}_physical_page(). The former no longer accepts
flags (the only flag PHYSICAL_PAGE_DONT_WAIT wasn't needed anymore).
Instead it returns an implementation-specific handle that has to be
passed to the latter. Added vm_{get,put}_physical_page_current_cpu()
and *_debug() variants, that work only for the current CPU,
respectively when in the kernel debugger. Also adjusted the
vm_translation_map operations accordingly.
* Made consequent use of the physical memory operations in the source
tree.
* Also adjusted the m68k and ppc implementations with respect to the
vm_translation_map operation changes, but they are probably broken,
nevertheless.
* For x86 the generic physical page mapper isn't used anymore. It is
suboptimal in any case. For systems with small memory it is too much
overhead, since one can just map the complete physical memory (that's
not done yet, though). For systems with large memory it counteracts
the VM strategy to reuse the least recently used pages. Since those
pages will most likely not be mapped by the page mapper anymore, it
will keep remapping chunks. This was also the reason why building
Haiku in Haiku was significantly faster with only 256 MB RAM (since
that much could be kept mapped all the time).
Now we're using a different strategy: We have small pools of virtual
page slots per CPU that are used for the physical page operations
(memset_physical(), memcpy_*_physical()) with CPU-pinned thread.
Furthermore we have four slots per translation map, which are used to
map page tables.
These changes speed up the Haiku image build in Haiku significantly. On
my Core2 Duo 2.2 GHz 2 GB machine about 40% to 20 min 40 s (KDEBUG
disabled, block cache debug disabled). Still more than factor 3 slower
than FreeBSD and Linux, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28244 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed _BDeviceAddOn_ to DeviceAddOn, and put it into the BPrivate namespace.
* Moved the DeviceManager functionality into the AddOnManager - this also
solves a locking issue, as BInputServerDevice::Control() was called in the
context of the DeviceManager before.
* The AddOnManager now uses the BPathMonitor to monitor the devices that
BInputServerDevices ask for - this greatly simplifies the code.
* Got rid of TList.h, and use ObjectList.h instead.
* Added PathList class that has a list of paths with reference count, used by
DeviceAddOn and the AddOnManager.
* DeviceAddOn got an actual implementation that lives in InputServerDevice.cpp.
* Added an experimental BInputServerDevice::AddDevices() that could be used
instead of recursing over devices manually. It replaces the functionality
that was found in the DeviceManager before (this was done implicitely for
all monitored devices).
* Greatly cleaned up and simplified the AddOnManager.
* Also fixed lots of potential errors/leaks when things go wrong.
* Removed the extra locker in AddOnManager - its BLooper lock is now used
instead.
* Replaced PRINT()/PRINTERR() macros in the AddOnManager with TRACE(), and
ERROR(), both now use debug_printf().
* Hopefully this fixes the problem that I don't have keyboard under VirtualBox
from time to time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28241 a95241bf-73f2-0310-859d-f6bbb57e9c96
* check if locking the offscreen window succeeds before calling delete on it
* don't return offscreen windows in CountWindows and WindowAt (works now as on R5)
fixes ticket 1522, 1591, 1946, 2318 and propably more
While creating an BBitmap in BApplication the bitmaps window looper would
be added to the applications gLooperList, thus calling Quit() on that window
and later delete on a stale window pointer in BBitmaps dtor. The Lock() check
would fix the problem, but tests on R5 have shown that BApplication hides the
offscreen window in CountWindows() and WindowAt().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28236 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduced flag "invoke_scheduler" in the per CPU structure. It is
evaluated in hardware_interrupt() (x86 only ATM).
* Introduced SMP_MSG_RESCHEDULE_IF_IDLE message, which enters the
scheduler when the CPU currently runs an idle thread.
* Don't do dprintf() "CPU x halted!" when handling a SMP_MSG_CPU_HALT
ICI message. It uses nested spinlocks and could thus potentially
deadlock itself (acquire_spinlock() processes ICI messages, so it
could already hold one of the locks). This is a pretty likely scenario
on machines with more than two CPUs, but is also possible when the
panic()ing thread holds the threads spinlock. Probably fixes#2572.
* Reworked the way the kernel debugger is entered and added a "cpu"
command that allows switching the CPU once in KDL. It is thus possible
to get a stack trace of the thread not on the panic()ing CPU.
* When a thread is added to the run queue, we do now check, if another
CPU is idle and ask it to reschedule, if it is. Before this change, the
CPU was continuing to idle until the quantum of the idle thread
expired. Speeds up the libbe.so build about 8% on my machine (haven't
tested the full Haiku image build yet).
* When spinlock debugging is enabled (DEBUG_SPINLOCKS) we also record
the spinlock acquirer on non-smp machines. Added "spinlock" debugger
command to get the info.
* Added debugger commands "ici" and "ici_message", printing info on
pending ICI message respectively on a given one.
* Process not only a single ICI message in acquire_spinlock() and other
places, but all pending ones.
* Also process ICI messages when waiting for a free one -- avoids a
potential deadlock.
* Mask out non-existing CPUs in send_multicast_ici(). panic() instead of
just returning when there's no target CPU left.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28223 a95241bf-73f2-0310-859d-f6bbb57e9c96
used that handles NULL returns and doesn't expect an exception. This fixes that
certain constructors would still be called even if the allocation failed in low
memory situations.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28208 a95241bf-73f2-0310-859d-f6bbb57e9c96
bool return type. Did I mention this was an unstable Haiku extension?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28181 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a new class BAffineTransform, currently in the BPrivate namespace
and the inofficial "shared kit".
* Extended BPolygon to be transformable by a BAffineTransform.
Thanks a lot!
Minor fixes by myself:
* The class accidentally still derived from agg::trans_affine.
* Added then missing comparator operators.
* Swapped the BPoint* and count arguments of Apply(), since that seems
to be the more common order in the other Be API.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28176 a95241bf-73f2-0310-859d-f6bbb57e9c96
the data of two BMessages and allows recursive comparison (BMessage inside
BMessage). Note that using this API might require you to recompile your app in
the path to R1.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28174 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add possibility to restart a complete pipe through B_KDEBUG_RESTART_PIPE.
* Implement tail in the kernel debugger making use of the former.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28154 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Resolved TODO: The type of the gradient is no longer encoded twice in the
app_server link protocoll.
* Moved instantiation of the BGradient into the LinkReceiver::ReadGradient()
method.
* Check success for (at least) ReadGradient() in ServerWindow.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28150 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed a general problem with respect to overriding of the reserved
virtual function slots: instead of statically invoking the method
that corresponds to the reserved slot on the class that contains the
slot, we now invoke the virtual Perform() method. Perform() then dispatches
the method invocation to the "proper" class, i.e. the highest class in the
hierarchy that actually implements the requested method.
This fixes a crash in apps that use liblayout's MSlider class and
should fix one or other spurious bug with old apps or libraries, too.
* added new header folder 'binary_compatibility' that contains files that
define the method codes and data structures required by Perform()
* looked for and implemented all used reserved virtual slot functions to
invoke Perform() where necessary or to pass on the method call statically
(for slots that were already maintained by Be)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28124 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented BGradient, BGradientLinear, BGradientRadial,
BGradientDiamond, BGradientConic and BGradientRadialFocus
new Interface Kit classes.
* Implemented all the (AGG-based) backend necessary in
the app_server to render gradients (Painter, DrawingEngine)
* app_server/View can convert a BGradient layout to screen
coordinates.
* Added BGradient methods of the Fill* methods in BView.
* Implemented a test app and added it to the image as a
demo.
* Adopted Icon-O-Matic and libs/icon in order to avoid
clashing with the new BGradient class. Re-use some
parts where possible.
Awesome work, Artur! Thanks a lot. Now a more modern
looking GUI has just become much easier to implement! :-)
TODO:
* Remove the need to have gradient type twice in the
app_server protocol.
* Refactor some parts of the patch to remove duplicated
code (Painter, DrawingEngine).
* Adopt the BPicture protocol to know about BGradients.
* Review some parts of the BArchivable implementation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28109 a95241bf-73f2-0310-859d-f6bbb57e9c96
- initialize the time_base_frequency kernel arg (should be done in the bootloader though...). We will use MFP timer to support system_time(). At least try to.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28098 a95241bf-73f2-0310-859d-f6bbb57e9c96
file system can write to files before mounting.
* Set the flag for all file systems that actually can write.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28055 a95241bf-73f2-0310-859d-f6bbb57e9c96
the methods IsFile() and GetFilePath() to BDiskDevice, and
BDiskDeviceRoster::GetFileDeviceForPath().
* Added new syscalls to implement this functionality.
* Added new flag B_DISK_DEVICE_IS_FILE.
* Fixed wrong operator precedence assumption in the BDiskDevice class at
several places.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28052 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added opengl to build be api headers
* define USES_BE_API for gen_matypes
this should fix the build for Linux which don't provide GL headers :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28050 a95241bf-73f2-0310-859d-f6bbb57e9c96
