- add 040 cpu and mmu stuff
- use leftover from the page root table to put interrupt vector table to set VBR to
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26627 a95241bf-73f2-0310-859d-f6bbb57e9c96
- rewrote early_query() to use the TT0 mapping to remove the page_hole stuff.
- fixed natfeat, using a page set up from the bootloader for now as it wants physical address. At least it's enough to see from the debugger:
load kernel...
kernel entry at 8003711a
Welcome to kernel debugger output!
Haiku revision: 26582
PANIC: unknown cpu_type 68040
Welcome to Kernel Debugging Land...
Running on CPU 0
kdebug>
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26599 a95241bf-73f2-0310-859d-f6bbb57e9c96
* As this was the last user of the READ_COUNT/WRITE_COUNT definitions in
vm_priv.h, I removed those as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26582 a95241bf-73f2-0310-859d-f6bbb57e9c96
It does its job by using part of libsupc++, with fake malloc and friends to make sure it won't double fault.
Works here, but cp-demangle must be extracted by hand from the lib, can't get the rule to work as I want, Ingo ?
Maybe using it directly without malloc hack would be ok with 16KB buffer, but I'm not sure of that.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26581 a95241bf-73f2-0310-859d-f6bbb57e9c96
fs_vnode_ops::write_pages() to be called with fsReenter = true. Since
this is no longer the case, the argument has become superfluous. For
read_pages() it always was. Removed the argument from the functions
and all functions that propagated it.
* Some whitespace at the end of lines was removed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26579 a95241bf-73f2-0310-859d-f6bbb57e9c96
introduces the following relevant changes:
* VMCache:
- Renamed vm_cache to VMCache, merged it with vm_store and made it a
C++ class with virtual methods (replacing the store operations).
Turned the different store implementations into subclasses.
- Introduced MergeStore() callback, changed semantics of Commit().
- Changed locking and referencing semantics. A reference can only be
acquired/released with the cache locked. An unreferenced cache is
deleted and a mergeable cache merged when it is unlocked. This
removes the "busy" state of a cache and simplifies the page fault
code.
* Added VMAnonymousCache, which will implement swap support (work by
Zhao Shuai). It is not integrated and used yet, though.
* Enabled the mutex/recursive lock holder asserts.
* Fixed DoublyLinkedList::Swap().
* Generalized the low memory handler to a low resource handler. And made
semaphores and reserved memory handled resources. Made
vm_try_resource_memory() optionally wait (with timeout), and used that
feature to reserve memory for areas.
...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26572 a95241bf-73f2-0310-859d-f6bbb57e9c96
bootloader's smp init and into its own unit.
ACPI tables can now generally be found with acpi_find_table(signature).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26538 a95241bf-73f2-0310-859d-f6bbb57e9c96
- bitfield definitions of page dirs were reversed... 040 is still wrong though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26528 a95241bf-73f2-0310-859d-f6bbb57e9c96
- move part of mmu handling to mmu-dependant files and extend ops
- implemented 040 mmu init. doing so I spotted a bug in ARAnyM which ignored [ID]TT0. Linux likely doesn't use them but I was too lazy touse temporary page tables. I also noticed bitfields were in wrong order, to be fixed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26527 a95241bf-73f2-0310-859d-f6bbb57e9c96
though until we use ACPI for proper PCI IRQ routing through the IO APIC.
Therefore the IO APIC code path is not yet enabled and the IO APIC isn't used.
ISA interrupts would work though, as would PCI interrupts if you'd hardcode
them for your specific configuration.
Note that this change also modifies some parts in the bootloader and in the PIC
setup to make local APICs available even on non-SMP systems. This causes APIC
timers to be used instead the normal PIT if it is available (also on non-SMP
configurations).
Also fixes some general errors in SMP and PIC code as well as some code cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26492 a95241bf-73f2-0310-859d-f6bbb57e9c96
This allows drivers to lock the memory outside of the original team context.
* create_area_etc() got a struct team as first argument, but that should have
been a team_id.
* Removed delete_area_etc() - there is already vm_delete_area() doing the same
thing.
* Renamed vm_get_address_space_by_id() to vm_get_address_space(), as there is
no other method of getting an address space.
* Removed erroneous white space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26455 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the superfluous "flags" parameter from ConditionVariable::Add()
that we forgot there when we moved the flags field from
ConditionVariableEntry::Add() to Wait().
* Using this method was therefore not a good idea - only UnixFifo did, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26454 a95241bf-73f2-0310-859d-f6bbb57e9c96
disk system lists.
* Added module watching; on module changes, it will now automatically rescan
the disk systems.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26368 a95241bf-73f2-0310-859d-f6bbb57e9c96
it clear when boot_splash_set_stage() must no longer be used.
* Free the memory associated with the kernel args before starting the
init process. Unlike the original TODO stated there are quite a few
more users of the kernel args (including the boot splash screen),
hence we can't really do that earlier, unless we decide to copy the
data over to the kernel heap.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26344 a95241bf-73f2-0310-859d-f6bbb57e9c96
It follows the semantics of the BFS R/W lock, though, that is, if you unlock
your write lock before the read locks, the read locks effectively become
write locks, too.
* Added a mutex_transfer_lock() function that will allow you to unlock a mutex
in a different thread than the one which locked it (only matters if KDEBUG
is enabled, though).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26316 a95241bf-73f2-0310-859d-f6bbb57e9c96
automatically selected at boot time. Pit and Apic timers are implemented
for now. Thanks Dustin!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26265 a95241bf-73f2-0310-859d-f6bbb57e9c96
serve, bin sizes and page size. This minimizes the amount of "large"
allocations made in heaps that don't have a bin for the allocation size
(combining multiple pages). This is desirable as such large allocations
are generally pretty inefficient, and also because it separates larger from
smaller allocations better, making the chance of a heap becoming empty higher.
For now there are three heap classes "small", "large" and "huge", with a
predefined set of bin sizes for each. This might need some finetuning later on.
Reduce the grow size to 4MB though as the allocations should now be spread
across heap classes which each grow on their own.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26210 a95241bf-73f2-0310-859d-f6bbb57e9c96
the newly found disk systems.
* _ScanPartition() now allows to restrict the disk systems to a predefined set.
* _ScanPartition() now even scans partitions that already have a disk system
assigned; if a better one is found, the existing one is replaced. It will
ignore mounted or partitions with children, though.
* KPartition now also stores the priority of the disk system assigned to it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26177 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Use the platform object to determine the platform type in system_info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26166 a95241bf-73f2-0310-859d-f6bbb57e9c96
per cache.
* Changed the strategy vm_cache_acquire_page_cache_ref() uses to ensure
that the cache isn't deleted while trying to get a reference. Instead
of the global cache pages hash table lock, it holds the global cache
list lock now. We acquire + release this lock in delete_cache() after
removing all pages and just before deleting the object.
* Some small optimizations using the property that the cache's pages are
ordered, now (vm_cache_resize(), vm_page_write_modified_page_range(),
vm_page_schedule_write_page_range()).
* Replaced some code counting a cache's pages by simply using
vm_cache::page_count.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26160 a95241bf-73f2-0310-859d-f6bbb57e9c96
D. Sleater. Also added a IteratableSplayTree class that extends
SplayTree, additionally maintaining a singly-linked list, thus allowing
for efficient forward iteration.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26159 a95241bf-73f2-0310-859d-f6bbb57e9c96
always returned B_OK) by a Init() method, which sets the initial size
and returns an error, if that fails.
* Adjusted code using the classes accordingly. Replaced a few
InitCheck() methods in the network code by Init().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26127 a95241bf-73f2-0310-859d-f6bbb57e9c96
a flattened argument/environment buffer now. This simplifies the work
for the kernel a bit, since it can just copy the buffer and check
whether it looks OK instead of messing around with individual strings.
The runtime loader also gets a flattened array.
* Set the maximum size of the arguments/environment buffer to 128 KB.
When more arguments are passed, we fail with a proper error code
(instead of just truncating the arguments as before).
* On exec*() the first argument was silently replaced by the given path
name, which is not correct.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26119 a95241bf-73f2-0310-859d-f6bbb57e9c96
- remove unneeded include to make those usable by bootloader.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26117 a95241bf-73f2-0310-859d-f6bbb57e9c96
- kernel_m68K almost links now, jsut bails out on the linker script...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26096 a95241bf-73f2-0310-859d-f6bbb57e9c96
- we'll just use decimal chip number (68030, ...) to identify cpu, fpu, and mmu for simplicity.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26041 a95241bf-73f2-0310-859d-f6bbb57e9c96
waiting for a heap grow.
* Use that nogrow version in the VM code to avoid a deadlock with the address
space lock when a grow operation would try to create an area while a malloc
happened from such a function in the VM.
* When waiting for a grow to happen, notify the waiting thread from the grower
also if it failed to allocate a new heap. Otherwise a thread would just sit
there and wait until another thread requested growing too and that one
succeeded (or just forever in the worst case).
* Make the dedicated grow heap growable too. If the current grow heaps run low
on memory it will instruct the grower to allocate a new grow heap. This
reduces the likelyhood of running out of memory with no way to grow to a
minimum. As the growing is done asynchronously it is still possible to
happen, but it is highly unlikely as the grow heap is solely used to
allocate memory in the process of creating new heap areas and it will even
try using normal public memory if the dedicated memory has run out.
* Reduced the dedicated grow heap from 2 to 1MB. As it can now grow itself, it
doesn't need to last so long.
* Extract heap creation into it's own function that does area creation and heap
attach and use this function for growing normal and grow heaps.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26009 a95241bf-73f2-0310-859d-f6bbb57e9c96
and remove the then unneeded mutex_init() for them.
* Remove the workaround for allowing uninitialized mutexes on kernel startup.
As they are all initialized statically through the MUTEX_INITIALIZER() now
this is not needed anymore.
* An uninitialized mutex will now cause a panic when used to find possibly
remaining cases.
* Remove now unnecessary driver_settings_init_post_sem() function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25812 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Cleanup the license header and add authors
* Sort the available keymaps list in the config file and add 'dv'
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25806 a95241bf-73f2-0310-859d-f6bbb57e9c96
keymap there too.
* Add a config header where one can select what KDL keymap should be used
(currently only 'us' and 'sg' are available though).
* Provide a third keymap that is used when the alt modifier is used (the swiss
german keymap is pretty useless without alt as all the useful keys like
backslash and curly braces use alt).
Our KDL is so powerful and nice to use, the only thing that bothered me was
that I always had to think about where some of the special keys are located in
the US keymap. So this simple compile-time keymap switching provided to be
helpful for me and might be for others too. Keymaps for other layouts obviously
have to be written before this becomes really useful.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25803 a95241bf-73f2-0310-859d-f6bbb57e9c96
be put into a boot_item in frame_buffer_console_init().
* The VESA driver now supports gettings the EDID information as well; this
is necessary now, since the app_server no longer takes over the mode the
boot loader had chosen.
* Note, we might want to do this via vm86 instead in the future, and remove
the kernel part again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25786 a95241bf-73f2-0310-859d-f6bbb57e9c96
file for hpet implementation. Not yet added to the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25773 a95241bf-73f2-0310-859d-f6bbb57e9c96
B_DEBUG_SPINLOCK_CONTENTION is defined to 1. It typedefs spinlock to a
structure (thus breaking BeOS binary compatibility), containing a
counter which is incremented whenever a thread has to wait for the
spinlock.
* Added macros for spinlock initialization and access and changed
code using spinlocks accordingly. This breaks compilation for BeOS --
the macros should be defined in the respective compatibility wrappers.
* Added generic syscall to get the spinlock counters for the thread and
the team spinlocks.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25752 a95241bf-73f2-0310-859d-f6bbb57e9c96
pipes in the shell, though the semantics is a little different: The
second command is invoked whenever the first command has written a
complete line. The line is passed as last argument to the second
command. The new command flag B_KDEBUG_PIPE_FINAL_RERUN causes the
second command to be invoked again (with NULL argument) after the
first command is done.
* Added kprintf_unfiltered() and kputs_unfiltered() which bypass the
pipe mechanism and directly print to the bluescreen/serial output.
* Moved most commands from debug.cpp to the new
debug_builtin_commands.cpp.
* B_KDEBUG_DONT_PARSE_ARGUMENTS commands don't get an argument anymore,
if it would consist of white space only.
* Added new debugger command return value B_KDEBUG_ERROR, which
indicates that executing the command failed. This return code will
abort a complete pipe.
* Since debugger commands can nest (i.e. one command can invoke another
one) the setjmp()/longjmp() mechanism to restore the stack after a
page fault in a command needs more than one jump buffer.
* Added abort_debugger_command(), which longjmp()s out of the currently
executed command. This will also abort the current pipe.
* When pagination is enabled pressing "a" will abort the running command
(as opposed to "q" which only disables the blue screen output, but
lets the command continue).
* Added debugger commands:
- "grep" which can be used to filter output by pattern. Removed the
"filter" command and the underlying mechanism that did that before.
- "head" which prints only the first lines of output of another
command.
- "wc" counts lines, words, and characters of another command's
output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25744 a95241bf-73f2-0310-859d-f6bbb57e9c96
remains. This replaces the previous mechanism of switching the thread to
a dedicated death stack. We might consider moving more cleanup work to
the undertaker, but that seems a little more involved.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25704 a95241bf-73f2-0310-859d-f6bbb57e9c96
than a semaphore, and can already be used in the early boot process.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25689 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Adjusted code using recursive locks respectively. The initialization
cannot fail anymore, and it is possible to use recursive locks in the
early boot process (even uninitialized, if in BSS), which simplifies
things a little.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25687 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use vm86 mode to call the VESA BIOS to do the actual mode switching by
providing an ioctl in the vesa driver.
* Fix vm86.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25680 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved devfs from fs/ to device_manager/, and separated the legacy driver
support from it.
* Removed fast_log module.
* There are a couple of (temporary) regressions, though:
- legacy SATA and ISA IDE support is disabled, the drivers haven't been
ported yet.
- The not yet used ATA bus manager hasn't been ported yet, either.
- AHCI changes have not been tested.
- the listdev command has been removed from the build (as it currently
doesn't work anymore).
- device manager generated IDs currently are not freed anymore when a device
node is removed.
- generic drivers can't yet use the new driver architecture.
- simple busses that do not support device types won't work yet.
- legacy driver publishing/unpublishing (ie. what USB needs) has not been
tested, and may be broken.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25662 a95241bf-73f2-0310-859d-f6bbb57e9c96
vm_page_write_modified_pages(), save that it only writes pages in the
given range.
* Added vm_page_schedule_write_page_range() which schedules all modified
pages in the given cache's range for writing by the page writer.
* Added _kern_sync_memory() syscall and the msync() POSIX function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25620 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The new function vm86_do_int(struct vm86_state *state, uint8 vec) provides a
facility to call BIOS interupt handlers. The function must only be called from
a user thread context because the lower 1MB of the address space is used.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25610 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add a "fault_callback" to the thread structure which is called when a
unhandled page fault happens in user space. A SIGSEGV will only be sent
if the callback returns "true".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25609 a95241bf-73f2-0310-859d-f6bbb57e9c96
* In vm86 mode CS will have arbitrary values so we check for both USER_CODE_SEG
and the VM flag in EFLAGS. This is also done when entering interrupt gates.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25607 a95241bf-73f2-0310-859d-f6bbb57e9c96
compatible with what our code assumed (pointers to objects of
TraceEntry and its POD base class trace_entry aren't identical
anymore).
* Added optional stack traces for ktrace_printf() output in the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25531 a95241bf-73f2-0310-859d-f6bbb57e9c96
Changed condition variables so that it is allowed to block (e.g. lock
mutexes etc.) between Add() and Wait(). This fixes#2059, since the
block writer used them this way and could thusly fail to wait for a
condition variable, causing a temporary stack object to be used past its
lifetime.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25525 a95241bf-73f2-0310-859d-f6bbb57e9c96
to contain headers shared by kernel and userland (mainly libroot).
* Moved quite a few private kernel headers to the new location. Split
several kernel headers into a shared part and one that is still kernel
private. Adjusted all affected Jamfiles and source in the standard x86
build accordingly. The build for other architectures and for test code
may be broken.
* Quite a bit of userland code still includes private kernel headers.
Mostly those are <util/*> headers. The ones that aren't strictly
kernel-only should be moved to some other place (maybe
headers/private/shared/util).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25486 a95241bf-73f2-0310-859d-f6bbb57e9c96
address space that is fully locked and marked B_KERNEL_AREA. It can
thus be accessed by the kernel without additional checks.
* For each userland thread we do create a user_thread structure in that
area. The structure is accessible from userland via TLS, using the
private get_user_thread() function.
* Introduced private userland functions [un]defer_signals(). They can be
used to cheaply disable/re-enable signal delivery. They use the
user_thread::defer_signals/pending_signals fields which are
checked/updated by the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25451 a95241bf-73f2-0310-859d-f6bbb57e9c96
changes to the area (delete, resize, clone) from userland.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25450 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added BDiskDeviceRoster::GetDiskSystem() method, that can get a disk system
by short/pretty/module name - since they should all be unique, I put them
in a single namespace, please complain if you don't like that :-)
* Cleaned up DiskSystem.h and DiskDeviceRoster.h according to the updated
header guidelines.
* Renamed ntfs pretty name from "ntfs File System" to "Windows NT File System".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25414 a95241bf-73f2-0310-859d-f6bbb57e9c96
arguments they get a single thread_creation_attributes structure now.
* Added stack_address and stack_size to thread_creation_attributes,
which allow to specify the stack size or the stack to be used for the
new user thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25389 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed operator=(): the second argument of SetTo() is a boolean (normalize),
not the length of the buffer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25382 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the semantics of unnamed semaphores. Before parent and child
of a fork() would always share an earlier created semaphore. Now we do
that only, if the "shared" parameter of sem_init() was true. That's
still not quite the behavior Linux and Solaris have, but should be
perfectly fine with how reasonable code would use the API.
* There's a global table for shared unnamed semaphores now. ATM a
semaphore is leaked when no one explicitly destroys it (just as with
named sems).
* Enforce per-team and global semaphore number limits.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25362 a95241bf-73f2-0310-859d-f6bbb57e9c96
not supposed to be passed to pathconf() or sysconf().
* Added POSIX semaphore related macros.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25361 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Allow userland teams to create areas below 1 MB when requested specifically.
* Note, this is a temporary solution - see the comments in the code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25358 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed the old kernel_posix[_arch...].o to kernel_lib_posix...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25336 a95241bf-73f2-0310-859d-f6bbb57e9c96
Realtime option group). The implementation should be complete, but is
totally untested yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25326 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Trivial adjustments of code using mutexes. Mostly removing the
mutex_init() return value check.
* Added mutex_lock_threads_locked(), which is called with the threads
spinlock being held. The spinlock is released while waiting, of
course. This function is useful in cases where the existence of the
mutex object is ensured by holding the threads spinlock.
* Changed the two instances in the VFS code where an IO context of
another team needs to be locked to use mutex_lock_threads_locked().
Before it required a semaphore-based mutex implementation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25283 a95241bf-73f2-0310-859d-f6bbb57e9c96
that can unlock the mutex, so one bit is sufficient.
* Added cutex_init_etc() which has an additional "flags" parameter.
The only specifyable flag is CUTEX_FLAG_CLONE_NAME, which causes the
function to strdup() the given name and free() its copy in
cutex_destroy().
* cutex_destroy() does now unblock waiting threads.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25280 a95241bf-73f2-0310-859d-f6bbb57e9c96
name, couldn't resist :-P). It's semantically equivalent to a mutex,
but doesn't need a semaphore (it uses thread blocking and a simple
queue instead). Initialization can't fail. In fact it is ready to use
without initialization when living in the bss segment, also in the
early boot process. It's as fast as a benaphore in cases of low lock
contention, and faster otherwise. Only disadvantage is the higher
immediate memory footprint of 16 bytes.
* Changed how the "thread" and "threads" debugger commands list the
objects they are waiting for. Cutexes are also included.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25276 a95241bf-73f2-0310-859d-f6bbb57e9c96
the selecting thread, which has obviously no effect.
* Changed select_info::events to vint32. It is now updated atomically.
This removes a race condition when concurrent threads would notify at
the same time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25273 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the pointers const.
* Changed how the ARP module maintains its arp_entry::request_buffer: it
now uses the atomic_pointer*() functions to make sure there is no race
condition, and it's deleted only once.
* Getting an ARP entry would return uninitialized data, if the entry hadn't
been resolved yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25263 a95241bf-73f2-0310-859d-f6bbb57e9c96
64-bit safe version of atomic_test_and_set() for pointers:
atomic_pointer_test_and_set().
* The VFS is now using this function (it's not used anywhere else in the
kernel this way).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25260 a95241bf-73f2-0310-859d-f6bbb57e9c96
* cache paranoia was always enabled.
* Changed from paranoia on/off to levels. Adjusted the macros to take a
level argument.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25215 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added "mode" parameter to set_paranoia_check(), which specifies
whether the check is supposed to already exist/not exist yet. This
allows for, as it turns out, very useful additional tests. Added
{ADD,UPDATE}_PARANOIA_CHECK macros that imply the used "mode"
parameter.
* PARANOIA_SLOT_COUNT was accidentally redefined in the source file.
* Fixed remove_paranoia_check(). It didn't remove anything.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25207 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added capture_tracing_stack_trace() which allocates space in the
tracing buffer and captures the stack trace according to the given
parameters.
* Added TraceOutput::PrintStackTrace() to print a stack trace thus
created.
* Added TraceEntry::DumpStackTrace() callback which is supposed to print
a stack trace for the entry, if it can do that.
* Added "--stacktrace" switch to the "traced" command, which causes the
stack traces for all entries that have one to be printed as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25205 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added support for non-published condition variables. One has to call
Init() on those, and add entries directly with the
ConditionVariable::Add() method.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25110 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the object pointer passed to thread_prepare_to_block() const, so
that strings can be passed without casting. Passing a string could
maybe be made a convention for THREAD_BLOCK_TYPE_OTHER.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25109 a95241bf-73f2-0310-859d-f6bbb57e9c96
respective Private* base class.
* Changed sigwait() and sigsuspend() to use thread_block() instead of a
condition variable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25100 a95241bf-73f2-0310-859d-f6bbb57e9c96
thread_block(), thread_unblock(),...) that allow a thread to wait for
something without needing a semaphore or condition variable. It can
simply block and another thread can unblock it. Supports timeouts and
interrupting. Both semaphores and condition variables use this
common mechanism, now.
* Semaphores:
- Some simplifications due to the thread blocking mechanism.
- Changed locking order to sem -> thread. It was the other way around
before and when introducing the wait_for_objects() support I had
also introduced a situation where the locking was reverse, which
could potentially cause a dead lock on SMP systems.
- Instead of queueing thread structures, a semaphore queues
queued_thread entries now, which are created on the stack. The
thread::sem structure could thus be removed.
- Added sem_entry::net_count, which is sem_entry::count plus the
acquisition count of all waiting threads. This number is needed in
remove_thread_from_sem() and instead of computing it there we
maintain it.
- Fixed remove_thread_from_sem(). It would not unblock threads, if
the sem count was <= 0.
- Made sem::last_acquirer unconditional. It is actually needed for
sem_info::latest_holder. Fixed fill_sem_info() accordingly.
- Added some optional tracing output, though only via ktrace_printf().
* Condition variables:
- Could be simplified significantly through the use of the thread
blocking mechanism. Removed a good deal of unnecessary code.
- Moved the ConditionVariableEntry "flags" parameter from Wait() to
Add(), and adjusted all places where condition variables are used
accordingly.
* snooze() uses thread_block_with_timeout() instead of a semaphore.
* Simplified thread interrupting in the signal and user debugger code.
Instead of separate functions for threads waiting on a semaphore or
condititon variable, we only have a single thread_interrupt(), now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25099 a95241bf-73f2-0310-859d-f6bbb57e9c96
- If the hook of the timer we're cancelling is currently being
executed, we do now wait till it is finished. This is how the BeBook
specifies the function to behave.
- Periodic timers would not be cancelled, if their hook was being
invoked at the same time, since they weren't in the queue during
that time.
- Since we know the CPU on which the timer is scheduled (timer::cpu),
we don't have to look through any other CPU queue to find it.
- Fixed the return value. It should report whether the timer had
already fired, and was not always doing that.
* Added private add_timer() flag B_TIMER_ACQUIRE_THREAD_LOCK. It causes
the thread spinlock to be acquired before the event hook is called.
cancel_timer() doesn't wait for timers with the flag set. Instead we
check in the timer interrupt function after acquiring the thread
spinlock whether the timer was cancelled in the meantime. Calling
cancel_timer() with the thread spinlock being held does thus avoid any
race conditions and won't deadlock, if the event hook needs to acquire
the thread spinlock, too. This feature proves handy for some kernel
internal needs.
* The scheduler uses a B_TIMER_ACQUIRE_THREAD_LOCK timer now and
cancel_timer() instead of the no longer needed
_local_timer_cancel_event().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25098 a95241bf-73f2-0310-859d-f6bbb57e9c96
kernel and added a WrapperTraceFilter* parameter, which allows for
additional filtering. This way other commands can print tracing output
with special filtering.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25094 a95241bf-73f2-0310-859d-f6bbb57e9c96
variable at once. It wasn't used anymore, and the code gets simpler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25080 a95241bf-73f2-0310-859d-f6bbb57e9c96
ones) for wait_for_child(), which is notified when any job control
condition (child dead, stopped, continued) occurs. These events are
relatively rare anyway, and it simplifies the code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25079 a95241bf-73f2-0310-859d-f6bbb57e9c96
to port_buffer_size_etc(), but returns the info through a structure,
which also identifies the sender (uid, gid, team ID) of the message.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25003 a95241bf-73f2-0310-859d-f6bbb57e9c96
and defines the macros needed by them.
* Renamed syscall sys_vm_map_file() to _kern_map_file() and changed the
path to an FD parameter. Changed vm_map_file() accordingly and
adjusted the kernel ELF loader and the runtime loader.
* Added syscall _kern_unmap_memory().
* Added bool unmapAddressRange parameter to vm_create_anonymous_area()
and map_backing_store(). If true and the address specification is
B_EXACT_ADDRESS, all areas in the specified address range will be
deleted (unless an area is covered only partially).
* Introduced B_SHARED_AREA flag, which is set on areas that have been
created by {vm,_user}_map_file() with REGION_NO_PRIVATE_MAP. When
fork()ing those areas won't be copied CoW, but rather be cloned. This
is needed for mmap() MAP_SHARED.
* {vm,_user}_map_file() also accept an FD argument < 0, in which case an
anonymous area is created.
* Implemented mmap() and munmap(). Currently there's the restriction
that we can't partially unmap areas. Otherwise the functions should be
rather compliant. We also support the non-POSIX extension
MAP_ANONYMOUS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24964 a95241bf-73f2-0310-859d-f6bbb57e9c96
That would explain why syscall restarts were broken. In fact there's no
reason to check the flag at all, since we know we set it.
ftp appears to work again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24918 a95241bf-73f2-0310-859d-f6bbb57e9c96
ATM.
* Changed common_fcntl() to also work for non-vnode-based FDs. Only the
operations that require a vnode do fail now. F_SETFL uses the new
fd_ops::set_flags() if available, falling back to the vnode respective
operation.
* Changed some direct accesses to file_descriptor::u::vnode. It was safe
in those cases, but might not be anymore if we ever change fd_vnode().
ftp can at least connect to servers again, now, but apparently we still
have a problem with syscall restarts -- downloads fail after one second,
when the timer goes off.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24917 a95241bf-73f2-0310-859d-f6bbb57e9c96
syscall_restart_ioctl_is_restarted() to syscall_restart_is_restarted,
IoctlSyscallFlagUnsetter to SyscallFlagUnsetter, and
IoctlSyscallRestartWrapper to SyscallRestartWrapper, as they are no
longer only used for ioctl().
* Removed unused syscall_restart_ioctl_handle_post().
* Made SyscallRestartWrapper a lot fancier. Instead of storing a
reference to the result value, it stores the value itself, and it
features all the interesting operators that make it appear like that
value. This simplifies the use of the class quite a bit.
* THREAD_FLAGS_SYSCALL is now set for all socket function and the
read[v](), write[v]() syscalls.
* Added is_syscall() function and net_stack hook to the net stack.
* Removed "kernel" parameter from all net_stack_interface and net_socket
module hooks. They aren't need any longer, since is_syscall() can be
used instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24914 a95241bf-73f2-0310-859d-f6bbb57e9c96
- The net_stack driver is no longer used. Instead we have a kernel
module which is directly used by syscall implementations in the
kernel. I.e. we no longer tunnel those functions through ioctls, but
have normal syscalls.
- Removed the superfluous net starter module.
- Implemented the FDTYPE_SOCKET type file_descriptors, that is sockets
are no longer vnode based.
- Adjusted libnetwork (the socket function implementations)
accordingly.
- Adjusted netstat accordingly.
* Socket module:
- Implemented socketpair().
- Added "kernel" parameter to the control hook. Quite a few more hooks
would actually need the parameter, but I didn't change those yet,
since that would probably also require changes to the protocol
module interface.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24908 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Revised the RLE algorithm used for compressing the boot splash artwork to
handle uncompressed runs.
* Compress the RGB channels separately for improved efficiency.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24844 a95241bf-73f2-0310-859d-f6bbb57e9c96
FIFO. Reimplemented pipe() to use it.
* pipefs is no longer mounted. Will remove the superfluous code soon.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24823 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Moved most file_system_module_info hooks into separate structures.
Those that operate on mounted volumes to fs_volume_ops, those
operating on a vnode to fs_vnode_ops.
- Got rid of the fs_volume, fs_cookie, fs_vnode typedefs. We use void*
again.
- Instead of a void* volume and node cookie hooks are passed a
fs_volume and fs_vnode structure pointer, which contain the cookie
and an ops pointer (fs_volume a few more things).
- The VFS {new,publish,get,...}_vnode() functions take a fs_volume*
instead of the volume ID. So does vfs_get_fs_node_from_path().
- Added type and flags arguments to publish_vnode() and the
get_vnode() hook and removed the type argument from lookup() hook.
Added vnode::type using formerly unused bits to store the node type.
Simplified a few things in the VFS due to the now always available
node type.
- Added fs_volume_ops::{create,delete}_sub_vnode() and
fs_vnode_ops::get_super_vnode() hooks. They are used to support file
system layers, e.g. allowing to extend an FS not supporting BeOS
attribute with attribute support. Needs some more work in the VFS.
- Added fs_vnode_ops::create_special_node() hook for creating special
nodes (e.g. FIFOs).
* Adjusted the built-in file systems and BFS according to the interface
changes. Removed all other FSs from the image for the time being.
We'll see whether further API changes are necessary before porting
them.
* Adjusted the bfs_shell accordingly.
* Implemented create_special_node() in rootfs to support special nodes.
* Added support for FIFOs:
- Added syscall _kern_create_fifo() (used by mkfifo()), which creates
a special node (type S_IFIFO) in the respective file system.
- When a special node is published the VFS creates a respective sub
node. Currently only FIFOs are supported.
- Added a little support for FIFO subnodes by using functionality from
the pipefs.
- Added mkfifo to the image. It can create FIFOs in the rootfs, but
the FIFOs aren't really usable ATM, since they still work like
pipes, i.e. readers and writers need to have them open at the same
time.
* Some smaller changes in the VFS:
- Made the *_CALL macros nicer to use (vargs).
- Refactored FS entry lookup into new function lookup_dir_entry().
- create_vnode() no longer just calls the FS create() hook. First it
looks up the entry and uses open_vnode(), if it already exists. This
is necessary for two reasons: 1) The FS might not support create()
while still allowing to open() entries. 2) When the FS has other
layers on to of it (or the respective node) it might not be
responsible for opening the node.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24816 a95241bf-73f2-0310-859d-f6bbb57e9c96
and ino_t instead of a path. Supposed to work with node monitoring messages.
Took the name from vfs_entry_ref_to_path() that takes the same arguments, but
suggestions for a better name are welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24813 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented RLE compression for the boot splash images, resulting in
smaller kernel and boot loader.
* Only the boot loader contains the RLE compressed images, the decompressed
buffer for the icons is passed to the kernel via kernel args.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24812 a95241bf-73f2-0310-859d-f6bbb57e9c96
The dividing line is back although with a little more spacing. Also the icon
spacing is a little increased and I added a subtle outline as well as a little
brighter background for the active icon look. The placement logic is now not
independant of each other anymore, otherwise I couldn't center both images
as a unit. But only the vertical placement is affected.
Comments as always on the commit mailing list... :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24796 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added {Create|Delete}Device() analogous to {Create|Delete}FileDevice
* Added a small DeviceWatcher class that reacts to entry creation/removal
* Implemented a way to start/stop node monitoring
* Start watching for devices after the boot volume has been mounted and the
the second initial scan was run
The disk device manager now creates and scans a device when a "raw" node is
published and deletes the device on removal. This makes hot-plugging of disk
devices (for example memory sticks using usb_disk) work. Their partitions will
be scanned and published so they can be mounted. Somehow the removal of the
partitions does not yet work however, any insights are welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24777 a95241bf-73f2-0310-859d-f6bbb57e9c96
the icons are centered.
* The boot loader and kernel now use the placement info that
generate_boot_screen now generates.
* Made the code that draws the images handle the case where any of the images
is larger than the frame buffer.
* All drawing functions need to know the image width (analogous for bytes per
row).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24773 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Not sure if it works as intended, as the specs are a bit vague.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24717 a95241bf-73f2-0310-859d-f6bbb57e9c96
item entry.
* The bios_ia32 video platform code now stores the available VESA modes in
the new vesa_modes kernel_args field.
* When configuring a VESA mode via settings file, it's no longer needed to
specify the exact mode - the closest available mode is now used. This should
help with bug #1962.
* frame_buffer_console_init() now also creates a boot_item for the VESA modes
in the kernel_args.
* The VESA accelerant now filters the mode list to only contain modes that
are actually supported.
* Moved non-shared vesa driver data into its own file vesa_private.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24675 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Added a "root" vnode to the io_context. It is used for resolving
paths and converting nodes to paths instead of sRoot. Some more
passing around of io_context structures was necessary.
- Introduced a new lock sIOContextRootLock to protect
io_context::root. The current uses of io_context::io_mutex
(put_vnode(), remove_vnode() while holding it) looked too suspicious
to use that mutex in vnode_path_to_vnode().
- Added _kern_change_root() syscall and chroot() libroot function.
- Added chroot coreutils program to the image. Funnily it seems to be
much easier to set up a little jail than under Linux (just copy
bash and libroot.so into respective subdirs; mount another pipefs
if you want pipe support).
With Haiku allowing direct access to directories via inode IDs
jailing is obviously not very secure at the moment.
- Added /var/empty to the image. It will be the chroot target for ssh.
* Changed vfs.cpp:get_cwd() so that the io_context::io_mutex is no
longer held when calling dir_vnode_to_path().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24673 a95241bf-73f2-0310-859d-f6bbb57e9c96
- The kernel stores the group IDs in the team structure. They are
correctly inherited on fork() and load_image_etc().
- Implemented getgroups() for real, i.e. it retrieves the groups
associated with the process.
- Implemented setgroups(), initgroups() and (the BSDish)
getgrouplist(). The latter two read the group information from the
"group database" /etc/group (if existing).
- Change the BIND port config, since we do have getgrouplist() now.
* The set-uid feature was broken when the path to the executable was
relative, since we used stat(), which, in the kernel, uses the kernel
IO context.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24669 a95241bf-73f2-0310-859d-f6bbb57e9c96
reference counted memory allocations. Can be used for sharing immutable
structures.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24666 a95241bf-73f2-0310-859d-f6bbb57e9c96
finally created a solution to avoid that: Header files that contain
configuration settings (and nothing else) go to build/config_headers.
To change settings, create a directory build/user_config_headers (which
is ignored by svn), copy the respective header there and modify it at
your leisure. Currently only tracing_config.h has been moved to the new
location, but more files will follow eventually. It is also recommended
to move optional macro definitions in Jamfile (as for BFS) to a config
header instead; the build system will then automatically rebuild on
changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24611 a95241bf-73f2-0310-859d-f6bbb57e9c96
a call chain contains a specific symbol (or address).
* Added a new KDL command "calling" that you can use to get a list of
threads that have a specific function in their call chain.
* Removed extraneous white space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24594 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add a cached_pages field to the system_info structure, and change the
meaning of the used_pages field to not include cached pages.
* Provide the needed info using the new calls vm_get_available_memory(),
and vm_page_num_available_pages().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24571 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Take extended family and model into account when generating the cpu
type and revision.
- Added Intel Core 2 Extreme to the cpu list.
Please review.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24509 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The boot splash code now checks wether debug screen output is enabled or not
using the above function.
* The boot splash code no longer maps it's own copy of the frame buffer, instead,
it will use the boot item feature as the VESA driver does. Also removed the
lock, as that's not needed at all.
* Renamed splash.cpp to boot_splash.cpp, and boot/splash.h to boot_splash.h
(it's not part of the boot loader, but the kernel).
* Removed dead code from boot_splash.cpp, added license. Replaced license
header in boot_splash.h to a style guide conforming one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24489 a95241bf-73f2-0310-859d-f6bbb57e9c96
executable permissions of the file by hand. We use _kern_access()
instead, which also handles the root case correctly.
* The user and group arguments of test_executable() aren't needed any
longer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24483 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed the icons image, it was upside down.
* Support the new 24 bit boot screen images in the boot_loader and the kernel.
* Prepare the code for future indexed versions of the boot screen images.
But the generate_boot_screen tool currently does not generate those.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24449 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Calculate icon offset from stage in splash.cpp, remove hard coded placement
values. Draw only icon, not the whole image from top/left to right of
icon.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24439 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added the feature of an animated boot screen (icons lighting up at
different boot stages).
* Added first version of new boot splash images, generated by the new
hsbg tool. (Also finally contains the "new" Haiku logo.)
changes by myself:
* Added Artur to the contributors list in About System.
* Fixed some left overs in the patch, kept tracing turned off.
TODO:
* Remove the need for hard coding the icon positions. (Maybe generate
those from hsbg and put them into images.h? Have user provide icon
spacing/offsets at the command line for hsbg?)
* Rename the stages to something meaningful.
* Use hsbg as a build system tool and generate images.h during build
from PNGs provided in the artwork folder.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24434 a95241bf-73f2-0310-859d-f6bbb57e9c96
structure. They are properly inherited and updated on
fork(), load_image(), and exec().
* Implemented the get[e]{u,g}id(), set[[r]e]{u,g}id() family for real.
* getgroups() also calls the kernel now, but only returns the effective
group ID. Supplementary groups support is still missing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24359 a95241bf-73f2-0310-859d-f6bbb57e9c96
as the death entries of a deceased processes that were in this group
and have not yet been reaped hold references to the group, so that it
won't be deleted until the group is empty and all gone group members
have been reaped. This fixes#1799 at last.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24335 a95241bf-73f2-0310-859d-f6bbb57e9c96
in code that has interrupts disabled. The chunks of memories are queued
and free()d periodically by a kernel daemon.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24332 a95241bf-73f2-0310-859d-f6bbb57e9c96
of the resolved ToDo, but could probably be made more efficient. Instead of
transfering the area, the area is cloned into the target teams' address space
and the original is deleted. This generates a new area_id for the transfered
area (as suggested by the ToDo). Updated syscall prototypes according to the
status_t to area_id return type change.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24320 a95241bf-73f2-0310-859d-f6bbb57e9c96
options.
* module_init() now sets sDisableUserAddOns to whatever the safemode settings
say, ie. the B_SAFEMODE_DISABLE_USER_ADD_ONS setting is now respected by
the module code.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24315 a95241bf-73f2-0310-859d-f6bbb57e9c96
* driver_entry::api_version now stores the actual version instead of a
pointer to it.
* Renamed node_path_entry to path_entry and reused it for driver
reloading: handle_driver_events() will now also check for drivers to
add in the sDriversToAdd list.
* Added new devfs_driver_added(), and devfs_driver_removed() functions
that trigger certain driver actions.
* Implemented notifying devfs on B_ENTRY_CREATED, B_ENTRY_REMOVED, and
B_ENTRY_MOVED events in probe.cpp. The watched directory inode numbers
are now stored in a hash for B_ENTRY_MOVED.
* unpublish_driver() did not actually delete the node, it only marked
it removable since we never get/put the node. We now do, and so the
node is actually removed as intended.
* Added "devfs_driver" KDL command.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24152 a95241bf-73f2-0310-859d-f6bbb57e9c96
and made it public (within the kernel).
* _user_entry_ref_to_path() is now using that function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24151 a95241bf-73f2-0310-859d-f6bbb57e9c96
negative relative timeout would be converted to B_INFINITE_TIMEOUT.
For some reason the ScreenSaver preflet is snooze()ing with such
a value.
* Some more comments.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24080 a95241bf-73f2-0310-859d-f6bbb57e9c96
utilizes the THREAD_FLAG_DONT_RESTART_SYSCALL (but only in SIGCONT
for now).
* resume_thread() is now using that flag to be compatible with BeOS.
* This fixes the Terminal hanging on close.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24045 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added team::flags. Currently only used for setting a flag when a team
has exec()ed.
* Some improvements of _user_setpgid():
- It failed incorrectly when the target process was a process group
leader. According to the standard it shall fail when the process is
a session leader. Moving a process group leader to another process
group is fine, even if that leaves the group leaderless.
- Fixed race conditions. We need to recheck the error conditions when
we hold the team spinlock. Otherwise the situation could change
while we allocated the new process group. This was one of the
reasons for bug #1799 -- after the shell fork()'s both parent and
child invoke setpgid() for the child.
- Fixed behavior for pid == pgid. It doesn't necessarily mean that a
new group has to be created.
- Fixed update of target process group orphaned state.
- Squashed TODO: setpgid() on a child is supposed to fail after the
child has exec()ed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24041 a95241bf-73f2-0310-859d-f6bbb57e9c96
This eliminates the edge case where the grow thread would not be able to create
a new area because no memory could be allocated for the allocation of the area.
As this case cannot happen anymore, it is also not possible to deadlock in
memalign. Therefore the timeout (which would only have prevented the deadlock
but wouldn't have solved the edge case anyway) has been removed too.
Add options to dump the dedicated grow heap and to only print the current heap
count to the "heap" debugger command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23994 a95241bf-73f2-0310-859d-f6bbb57e9c96
but there's a special handling for 0 us relative timeouts. Syscalls
usually return B_WOULD_BLOCK instead of B_TIMED_OUT in this case, and
callers might explicitely check for it. Hence we don't convert 0 us
timeouts anymore. gdb works again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23989 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented automatic syscall restarts:
- A syscall can indicate that it has been interrupted and can be
restarted by setting a respective bit in thread::flags. It can
store parameters it wants to be preserved for the restart in
thread::syscall_restart::parameters. Another thread::flags bit
indicates whether it has been restarted.
- handle_signals() clears the restart flag, if the handled signal
has a handler function installed and SA_RESTART is not set. Another
thread flag (THREAD_FLAGS_DONT_RESTART_SYSCALL) can prevent syscalls
from being restarted, even if they could be (not used yet, but we
might want to use it in resume_thread(), so that we stay
behaviorally compatible with BeOS).
- The architecture specific syscall handler restarts the syscall, if
the restart flag is set. Implemented for x86 only.
- Added some support functions in the private <syscall_restart.h> to
simplify the syscall restart code in the syscalls.
- Adjusted all syscalls that can potentially be restarted accordingly.
- _user_ioctl() sets new thread flag THREAD_FLAGS_IOCTL_SYSCALL while
calling the underlying FS's/driver's hook, so that syscall restarts
can also be supported there.
* thread_at_kernel_exit() invokes handle_signals() in a loop now, as
long as the latter indicates that the thread shall be suspended, so
that after waking up signals received in the meantime will be handled
before the thread returns to userland. Adjusted handle_signals()
accordingly -- when encountering a suspending signal we don't check
for further signals.
* Fixed sigsuspend(): Suspending the thread and rescheduling doesn't
result in the correct behavior. Instead we employ a temporary
condition variable and interruptably wait on it. The POSIX test
suite test passes, now.
* Made the switch_sem[_etc]() behavior on interruption consistent.
Depending on when the signal arrived (before the call or when already
waiting) the first semaphore would or wouldn't be released. Now we
consistently release it.
* Refactored _user_{read,write}[v]() syscalls. Use a common function for
either pair. The iovec version doesn't fail anymore, if anything could
be read/written at all. It also checks whether a complete vector
could be read/written, so that we won't skip data, if the underlying
FS/driver couldn't read/write more ATM.
* Some refactoring in the x86 syscall handler: The int 99 and sysenter
handlers use a common subroutine to avoid code duplication.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23983 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Tracing of allocations, reallocations and frees
* Leak checking infrastructure to dump allocations
The leak checking code records the team and thread id when an allocation is
made as well as stores the originally requested size. It also adds the
"allocations" debugger command that can dump all current allocations (usually
a huge list) or filter by either a team or thread id. This way it's easily
possible to find leftover allocations of no more active teams/threads.
Combined with the tracing support one might be able to track down the time and
reason of an allocation and possibly find the corresponding leak if it is one.
Note that kernel heap leak checking has to be enabled manually by setting the
KERNEL_HEAP_LEAK_CHECK define to 1.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23953 a95241bf-73f2-0310-859d-f6bbb57e9c96
and pages are now kept in lists as well. This allows to return free pages once
a bin does not need them anymore. Partially filled pages are kept in a sorted
linked list so that allocation will always happen on the fullest page - this
favours having full pages and makes it more likely lightly used pages will get
completely empty so they can be returned. Generally this now goes more in the
direction of a slab allocator.
The allocation logic has been extracted, so a heap is now simply attachable to
a region of memory. This allows for multiple heaps and for dynamic growing. In
case the allocator runs out of free pages, an asynchronous growing thread is
notified to create a new area and attach a new heap to it.
By default the kernel heap is now set to 16MB and grows by 8MB each time all
heaps run full.
This should solve quite a few issues, like certain bins just claiming all pages
so that even if there is free space nothing can be allocated. Also it obviously
does aways with filling the heap page by page until it overgrows.
I think this is now a well performing and scalable allocator we can live with
for quite some time. It is well tested under emulation and real hardware and
performs as expected. If problems come up there is an extensive sanity checker
that can be enabled by PARANOID_VALIDATION that covers most aspects of the
allocator. For normal operation this is not necessary though and is therefore
disabled by default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23939 a95241bf-73f2-0310-859d-f6bbb57e9c96
function has the old behavior. When false, it just calls the scheduler
without any priority adjustment or other stuff.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23906 a95241bf-73f2-0310-859d-f6bbb57e9c96
TraceOutput for output options instead.
* Added "traced" option --difftime. Instead of the absolute system time
it prints the difference time to the previously printed entry.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23864 a95241bf-73f2-0310-859d-f6bbb57e9c96
(must also compare to BSD; I've looked at their sources, but I might have
missed something).
* Added sys/file.h and the flock() system call.
* common_fcntl() could forget to put back the file descriptor on some error
conditions (I guess we should introduce and use a DescriptorGetter class).
* Cleaned up fcntl.h, moved the BSD extensions S_IREAD and S_IWRITE to
sys/stat.h where they belong, and added the missing S_IEXEC to them.
* Added some more comments.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23836 a95241bf-73f2-0310-859d-f6bbb57e9c96
* While this is not a really good idea for a lock with supposedly little
contention, but it'll fix bug #1731. I haven't tested it yet, but will
do so in a minute :-)
* I will need to rework the slab anyway so that it's possible to use it
as a replacement for our heap, and then I'll switch back to a benaphore
again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23822 a95241bf-73f2-0310-859d-f6bbb57e9c96
destination of the message and it's "what" field are stored. It might be
nice to also get some info about its fields -- maybe as an additional
option.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23810 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The kernel now opens up to 8 debugger modules (and puts them into an array;
maybe we'll want to switch to a doubly linked list when there is the need).
* Implemented an example debugger module that prints a stack trace of the
current thread when the kernel debugger is entered (not included in the
image).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23794 a95241bf-73f2-0310-859d-f6bbb57e9c96
For commands with this flag set, the parser won't parse the
arguments provided (it will only check for matching parentheses and
brackets), but will pass the unparsed argument list string to the
command instead.
* Set the new flag for the "expr" command, so one doesn't have to quote
the expression to evaluate anymore (or put it in parentheses).
* Fixed tokenizing of quoted and unquoted strings in expression mode.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23697 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the public hash_grow() function again (at least for now, it's only
private).
* Removed the newSize argument from hash_grow(); it will compute the new size
automatically.
* The block cache is now using hash_insert_grow() instead of hash_insert()
which should make hash lookups much faster with some 10 thousand blocks,
also increased the initial table size from 32 to 1024...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23692 a95241bf-73f2-0310-859d-f6bbb57e9c96
kSyscallParametersInfos to kExtendedSyscallInfos) and added "name"
field. Now the classes for syscall kernel tracing don't need to lookup
the syscall function symbol anymore, which speeds up printing/filtering
of those entries dramatically.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23687 a95241bf-73f2-0310-859d-f6bbb57e9c96
is recorded in a kernel trace entry (if tracing is enabled).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23686 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added "printteam" switch to "traced" command, enabling the printing of
the team ID.
* Added "team" filter to the "traced" command expression language.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23684 a95241bf-73f2-0310-859d-f6bbb57e9c96
write code aligned to what one has written in the comment (or the
other way around).
* Made trace_entry structure doubly linked, by introducing a
previous_size member. By using bit fields, shrinking the flags field
to 4 bits, and not saving the lower two bits of size and previous_size
(which are always 0 due to alignment), the structure remains 4 byte
sized and can still address the same entry size.
* kBufferSize is no longer one less than it could be.
* "traced" command:
- Use static variable for the iteration state rather then cluttering
the temporary debug variable name space.
- The <count> parameter can now be negative, in which case the entries
before (and including) <start> are printed.
- Added a new optional parameter, specifying the maximal number of
entries to be filtered. Filtered iteration is beautifully
comfortable now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23678 a95241bf-73f2-0310-859d-f6bbb57e9c96
command usage texts, which can be too long for kprintf().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23677 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add platform methods for timer as it is platform dependent.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23673 a95241bf-73f2-0310-859d-f6bbb57e9c96
boolean operators ("not", "and", "or") and filters matching thread IDs
or contained strings.
I'm still not fully happy with the command. It should be possible to
define a filter and then comfortably scroll through the matching
entries. Currently having to specify an index range of the unfiltered
entries is rather unhandy in combination with filtering.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23658 a95241bf-73f2-0310-859d-f6bbb57e9c96
So now there's a central place to enable tracing in general and for
individual components.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23645 a95241bf-73f2-0310-859d-f6bbb57e9c96
used it for an hour or so, I really wonder how we could live without it.
:-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23640 a95241bf-73f2-0310-859d-f6bbb57e9c96
about syscall parameters. Particularly interesting is a type_code field
for each parameter. The mechanism isn't very accurate, but we can
classify everything in string, pointer, and integer types.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23618 a95241bf-73f2-0310-859d-f6bbb57e9c96
add_debugger_command(), but additionally takes parameters "usage"
and "flags".
* Added add_debugger_command_alias() which creates another name for an
existing command.
* Added print_debugger_command_usage() to print a command's usage.
* invoke_debugger_command() intercepts invocations with "--help" and
prints the command's usage text, if it is known. If unknown, the
command will be called normally.
* Made use of the new functions in debug.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23573 a95241bf-73f2-0310-859d-f6bbb57e9c96
a command is executed anymore. Instead the least recently used
temporary variable is overwritten, if there's no free slot for a new
temporary variable.
* Removed the special handling for the command result variable ("_"). It
just works like any other temporary variable, now.
* Individual temporary variables can be removed (e.g. using the "unset"
command).
* Added unset_all_debug_variables() and "unset_all" command to unset
all persistent and temporary variables.
* Removed remove_all_temporary_debug_variables and renamed
remove_debug_variable() to unset_debug_variable().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23568 a95241bf-73f2-0310-859d-f6bbb57e9c96
* As a temporary work-around for the current slab allocator's area usage,
I added the CACHE_LARGE_SLAB flag, which will force the allocator to
use larger areas.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23564 a95241bf-73f2-0310-859d-f6bbb57e9c96
that is a little more powerful than BeOS'. It features:
- Persistent and temporary uint64 variables. The former kind is set
only by the user. The latter (those prefixed "_") can be set
automatically by commands, thus e.g. making it easier to access
members of a dumped structure. They are unset when the next command
is invoked. The special temporary variable "_" is defined as a
command's return value.
- Expressions can contain nested command invocations using brackets
("[ ... ]").
- Command lines are parsed by the expression parser, too. They can
contain command invocations (in brackets) and expressions (in
parentheses).
* Added debugger commands:
- expr: Evaluates the given expression and prints the result.
- unset: Undefines a variable.
- vars: Prints the values of all defined variables.
* Moved debugger command code into its own source file.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23546 a95241bf-73f2-0310-859d-f6bbb57e9c96
As (our) gcc unfortunately uses atexit() to clean up lazily initialized static
variables inside functions we have to ensure that we do the right thing with
unloadable shared objects. In case a shared object was unloaded that installed
an atexit() hook the application would crash on exit. We now implement a
callback into libroot that is used to call all the atexit() hooks of a
component that is to be unloaded. Most prominently this fixes the media_server
crash at shutdown.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23486 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added function to allocate space in the buffer.
* Dump() now fills a buffer instead of printing its data directly.
* This allows the new "#pattern" argument of the "traced" command to
work. When you're using that, the index of the trace entry is printed
out, too, so that you can then get a full dump around the hits.
* Added an AddDump() method to the AbstractTraceEntry class so that
there is no need to call the inherited function anymore.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23479 a95241bf-73f2-0310-859d-f6bbb57e9c96
will not accept if the allocator returns NULL and crashes instead
(ie. not compiling in tracing would have crashed if some module tried
to use it).
* Added total entries count to the KDL command output.
* Fixed computing the start index of the KDL command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23460 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented an optional tracing layer that can be used in the kernel.
Nice to use if you don't have serial output or need something that doesn't
slow down the system as much.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23447 a95241bf-73f2-0310-859d-f6bbb57e9c96
23139 into trunk, with roughly the following changes (for details svn
log the branch):
* The int 99 syscall handler is now fully in assembly.
* Added a sysenter/sysexit handler and use it on Pentiums that support
it (via commpage).
* Got rid of i386_handle_trap(). A bit of functionality was moved into
the assembly handler which now uses a jump table to call C functions
handling the respective interrupt.
* Some optimizations to get user debugger support code out of the
interrupt handling path.
* Introduced a thread::flags fields which allows to skip handling of
rare events (signals, user debug enabling/disabling) on the
common interrupt handling path.
* Got rid of the explicit iframe stack. The iframes can still be
retrieved by iterating through the stack frames.
* Made the commpage an architecture independent feature. It's used for
the real time data stuff (instead of creating a separate area).
* The x86 CPU modules can now provide processor optimized versions for
common functions (currently memcpy() only). They are used in the
kernel and are provided to the userland via commpage entries.
* Introduced build system feature allowing easy use of C structure
member offsets in assembly code.
Changes after merging:
* Fixed merge conflict in src/system/kernel/arch/x86/arch_debug.cpp
(caused by refactoring and introduction of "call" debugger command).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23370 a95241bf-73f2-0310-859d-f6bbb57e9c96
resized but still had dirty pages to be written back,
vm_cache_resize() (which is called with the inode lock being held)
deadlocked with the page writer.
* Now, I reintroduced busy_writing: it'll be set by everything that
writes back pages (vm_page_write_modified(), and the page writer),
and will be checked for in vm_cache_resize() - other functions are not
affected for now, AFAICT.
* vm_cache_resize() will clear that flag, and the writer will check it
again after it wrote back the page (which will fail when it's outside
the file bounds), and if it's cleared, it will get rid of the page
(if the file has been resized again in the mean time, writing it will
succeed then, and we'll keep the page around).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23334 a95241bf-73f2-0310-859d-f6bbb57e9c96
appear: when freeing a modified page, it wouldn't have a cache
anymore, but set_page_state_nolock() depended on it.
* To work around this, I added a vm_page_free() function, which the
caches that free modified pages have to call (but others may, too).
It will correctly maintain the sModifiedTemporaryPages counter in case
the cache has already been removed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23318 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ACPI is evaluated first as it also handles things like multi core or hyper threading setups
* Removed other (disabled) hyper threading code per the notes in the corresponding ToDo
* Limit the detected CPU count to 2 for now as I wasn't able to get it working in either emulation nor real hardware with more than 2 CPUs
* Added a reserved byte to the mp_config_table struct, it worked only by luck as the compiler did padding there to get to the same size
I can now boot my Core 2 Quad with two out of four processors active :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23100 a95241bf-73f2-0310-859d-f6bbb57e9c96
exit status of (non-main) threads of a team. Fixes bug #1644.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23009 a95241bf-73f2-0310-859d-f6bbb57e9c96
passes that information on to the kernel. This should fix wrong bytes per row with
certain resolutions and graphics cards.
* The boot loader now recognizes 15 bit modes that are advertised as 16 bit modes.
This should fix wrong colors in 16 bit modes on some cards.
* Reenabled setting MTRR for VESA mode - don't remember why I disabled it, but it
works fine on my test machines.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23006 a95241bf-73f2-0310-859d-f6bbb57e9c96
serial output, and puts it into the new kernel_args::debug_output field.
* syslog_init() will now check if there is anything in kernel_args::debug_output
and will put that into the syslog buffer.
* dump_block() now also prints an offset.
* Fixed warning in mmu.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23003 a95241bf-73f2-0310-859d-f6bbb57e9c96
* it now updates the partition data,
* the flags,
* and the disk geometry - and that now allows the session add-on to actually
detect a newly inserted CD.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22918 a95241bf-73f2-0310-859d-f6bbb57e9c96
device geometry.
* If SetTo() reports no media, and GetGeometry() fails, the device geometry
is now reset as well.
* KDiskDeviceManager::_ScanPartition() no longer unmarks the partition busy;
this is now done by the caller, and done independently from the outcome of
_ScanPartition(). This also fixes the problem that devices with no media
were never marked unbusy (and thus were ignored subsequently).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22912 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added vfs_unmount(), which allows unmounting by dev_t (used by the DDM).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22910 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Unmount when uninitializing a partition.
* Finished the media checker implementation, i.e. we rescan when a media
was inserted and uninitialize when ejected.
* Turned the disk device media checker from a kernel daemon into a thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22909 a95241bf-73f2-0310-859d-f6bbb57e9c96
that can be used by file systems.
* Changed the way the file cache works: instead of reading/writing to the
underlying device directly, it can now be used for any data source, ie.
also network file systems.
* As a result, the former pages_io() moved to the VFS layer, and can now be
called by a file system via {read|write}_file_io_vec_pages() (naming
suggestions are always welcomed :-)). It now gets an FD, and uses that to
communicate with the device (via its fs_{read|write}_pages() hooks).
* The file_cache_{read|write}() functions must now be called without holding
an I/O relevant file system lock. That allows the file cache to prepare the
pages without colliding with the page writer, IOW the "mayBlock" flag can
go into the attic again (yay!).
* This also results in a much better performance when the system does I/O and
is low on memory, as the page writer can now finally write back some pages,
and that even without maxing out the CPU :)
* The API changes put slightly more burden on the fs_{read|write}_pages()
hooks, but in combination with the file_map it's still pretty straight
forward. It just will have to dispatch the call to the underlying device
directly, usually it will just call its fs_{read|write}_pages() hooks
via the above mentioned calls.
* Ported BFS and FAT to the new API, the latter has not been tested, though.
* Also ported the API changes to the fs_shell. I also completely removed its
file cache level page handling - the downside is that device access is no
longer cached (ie. depends on the host OS now), the upside is that the code
is greatly simplified.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22886 a95241bf-73f2-0310-859d-f6bbb57e9c96
system by pretty name (not only module name) now.
* _user_initialize_partition() loads the disk system by pretty name.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22880 a95241bf-73f2-0310-859d-f6bbb57e9c96
K{Disk,File,Partitioning}System writing methods. It is now required
that the caller has marked the concerned partitions busy, hence we can
(read-)access them without needing a lock. The module interfaces will
will be changed to take advantage of the fact as well. The methods take a
disk_job_id instead of a KDiskDeviceJob* now, though I haven't quite
decided, whether we need it at all or just want to add a special
handling in the cases where notifications during the operation make
sense.
* Reimplemented the disk device write support syscalls (save
_user_move_partition() for which other module hooks are needed). They
call the KDiskSystem methods, now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22832 a95241bf-73f2-0310-859d-f6bbb57e9c96
Abstracted cpu and mmu version dependant stuff (compatibility where are you) into ops like func arrays.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22821 a95241bf-73f2-0310-859d-f6bbb57e9c96
synchronous scanning is supported.
* Removed the disk device job support from the disk device manager.
* K{Disk,File,Partitioning}System:
- Remove querying and validation methods.
- Commented out the modification methods until their fate is decided.
* Removed obsolete _user_get_partitionable_spaces().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22799 a95241bf-73f2-0310-859d-f6bbb57e9c96
(_kern_{supports,validate}_*(), etc.).
* Adjusted the prototypes of the disk device modification syscalls.
Commented out their implementations for the time -- they'll mostly
have to be rewritten completely.
* Implemented the userland disk device jobs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22781 a95241bf-73f2-0310-859d-f6bbb57e9c96