There doesn't seem to be anything ini the implementation that would
cause a problem, as long as you don't try to change this while the
window is already open.
gcc2 was relying on the c99 functions being there, but they are not in
the std namespace.
* Disable the C99 functions and macros in C++ mode
* Redefine them as inline functions in cmath in the std namespace.
Fixes#7396.
* There is no need to delay this to AllAttached
* Apps may want to override the SetDivider, and doing it as late as
AllAttached can be annoying.
Fixes#10734.
I already made this patch in Heidi's clone of BToolbar. Adding it here
allows me to drop Heidi's version altogether.
I also relicensed the header file at the permission of Stephan. The .cpp
file still lists him as author and copyright holder.
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
* Make it possible to extract more useful data from the certificate
* Also get the OpenSSL error message when a certificate can't be
validated. Send it to the verification failure callback so it can be
shown to the user.
CreateThreadEvent::DoDPC() missed a reference release to balance the
acquired reference before queuing the DPC, resulting in the
CreateThreadEvent objects being leaked.
This also removes the destructor that tried to cancel the DPC. Since
the class is reference counted and only destroyed when the DPC has
run and released the last reference, this didn't make much sense.
The signal to the team/thread is only actually sent in a deferred
procedure. To ensure that the team/thread stays valid between the DPC
being queued and it actually running, we need to acquire a reference.
Fixes#11390, where the DPC was run after the team was already
destroyed.
This isn't really a bus_manager yet, but just minimal support so
we can get rid of hardcoded ARM SoC support from the core kernel
code.
Needs lots of work, like proper handling of #address-cells and
the like. Also, generic attribute handling, device_manager
integration, and I could go on for hours ;)
* Partly reverting hrev47655, as the moved declarations are expected
by many ports to be accessable via string.h.
Following standards is a good thing in general, but not if it causes
more problems than it helps ...
* VMArea::AddWaiterIfWired(): Replace the ignoreRange argument by a
flags argument and introduce (currently only) flag
IGNORE_WRITE_WIRED_RANGES. If specified, ranges wired for writing
are ignored. Ignoring just a single specified range doesn't cut it
in vm_soft_fault(), and there aren't any other users of that feature.
* vm_soft_fault(): When having to unmap a page of a lower cache, this
page cannot be wired for writing. So we can safely ignore all
writed-wired ranges, instead of just our own. We even have to do that
in case there's another thread that concurrently tries to write-wire
the same page, since otherwise we'd deadlock waiting for each other.
The thread that is being [un]scheduled already has its time_lock locked
in {stop|continue}_cpu_timers(). When updating the TeamTimeUserTimer,
the team is asked for its cpu time. Team::CPUTime() then iterates the
threads of the team and locks the time_lock of the thread again.
This workaround passes a possibly locked thread through the relevant
functions so Team::CPUTime() can decide whether or not a thread it
iterates needs to be locked or not.
This works around #11032 and its duplicates #11314 and #11344.
when uninitializing a partition or a disk (removing the partition
table), check that all partitions from that table are unmounted, as they
are about to become invalid.
Fixes#8827.
The language and formatting conventions can now only be set when
creating the objects. This removed the needs for locking them when
formatting to avoid some other thread changing the format while it's
being used.
Adjust tests and DeskBar TimeView to the API changes.
Although done with the best intentions, the usage of #warning in the
ARM build makes it hard to see what's going on, or see any "real"
warnings.
Remove at least this particularly often triggered one, so we can
have a relatively "quiet" build again...
* Added VFS helper function check_access_permissions() that combines
several partially correct versions to the one true version (tm).
* All but BFS (since recently) missed the S_IXOTH for root on directories,
and all but packagefs missed proper group handling.
The BOOT_GDT_SEGMENT_COUNT was based on USER_DATA_SEGMENT on both
x86 and x86_64. However, on x86_64 the order of the segments is
different, leading to a too small gBootGDT array. Move the define to
the arch specific headers so they can be setup correctly in either case.
Also add a STATIC_ASSERT() to check that the descriptors fit into the
array.
Pointed out by CID 1210898.
There were 3 setting files, each an archived BMessage. Now there is only
one with all the data inside.
* Rework the SettingsPane class to save and load settings from a
message, rather than having each panel pick a file path on its own
* Move saving the app filters to the preference app, rather than the
server (so it's done at the same place as other settings)
* Rework loading prefs in the server so the settings message is read
from the file once and all settings are loaded from it.
This turns out to be more changes than I anticipated.
Fixes#9424.
* Since DNS are normally restricted to ASCII, the use of UTF-8 in domain
names is implemented using a "punycode" encoding.
* The request to the DNS server must be sent with the ASCII
representation of the domain name, however the Unicode one should be
used for user-visible parts.
* ICU provides an implementation of the conversion, which we use here.
* Conversion is currently done in-place and modifies the BUrl object
(this is similar to UrlEncode/UrlDecode).
* Adjust existing IDN test to make use of these methods. It's passing
now.
* We archive views using "managed" archives, and the children are not
attached in the BView(BMessage*) constructor, but later. So it's not
possible to find the target and scrollbars in the constructor of
BScrollView.
* Make BScrollView override AllUnarchived and find the target and
scrollbars again there. The code is slightly different as there is no
guarantee that the first child will be the target in that case. The
existing code in the constructor is preserved for non-managed archives.
* Instead of parsing the pattern everytime Format() is called, parse it
only once when the object is created.
* Adjust all callers to make use of the feature and reuse the instance
as much as possible. This also allows calling B_TRANSLATE only once
instead of everytime the formatting needs to be done. We use either a
static instance (when the message pattern is constant) or a field (when
it is not known to be constant).
* Since the BMessageFormat instances are now reused, add locking to
avoid race conditions (ICU itself is thread safe, but the format pattern
is recreated when the locale is changed)
This can be used to format complex messages properly. It moves the
complexity of handling plural forms, gender, and anything else needed
into the localizable string, rather than hardcoding it in the code.
This moves the difficulty of handling these things properly to people
doing translations, rather than relying on developers to do it.
Fixes#10755, but our localization must now be updated to make use of
the feature.
* ... and adjust all callers
* Remove NumberFormatImpl: we rely on ICU to provide this and it can be
fully wrapped into the C++ file. The class was a stub anyway.
* "Monetary" format is included in NumberFormat for now. There may be a
more generic solution to handle monetary and BTimeUnitFormat (and other
arbitrary units)
* Harmonize API for all B*Format to take an output BString by reference
as the first parameter,
* Move the FormatTime methods from BLocale to BTimeFormat
* Adjust all callers for BTimeFormat, BTimeUnitFormat and
BDurationFormat.
* Move relevant parts up into BFormat so other format classes can use
those
* Adjust BDurationFormat and BTimeUnitFormat for the changes
* Remove the "default" date format, it is better to keep only a default
locale and let applications create B*Formats from it as needed.
* Creating a B*Format without arguments to the constructor now
configures it for the default locale, which allows for easy use in
standard cases (formatting something with the current language and
format)
* Creating a B*Format is potentially an expansive operation, it is
advised to keep the instance around and reuse it whenever possible.
However it must be "refreshed" when the locale changes, for apps which
supports that, since it keeps a copy of the language and formatting
convention, rather than a pointer to the locale as it did before.
* MarkAsInvalid is used to enable or disable the mark
* The B_INVALID BControlLook flag is used
* invalid BTextControls are drawn with a red border.
* You ar encouraged to let the user know more precisely what's wrong, by
showing an helpful error message next to the control or in a tooltip.
* BDate setters don't perform any validation, use with caution.
* BCalendarView setters do perform validation checks, and will adjust
the day so it fits the requested month or year.
* Add tests for the BCalendarView setters.
* Add setters for the language and formatting conventions
* Add shortcut getter and setter for the date format
* Use those in the locale roster to make the BDateFormat actually use
the system preferred language and format.
* Applications can also use this to extract specific information from
the system format (eg. set date format to "LLLL" to extract month
names), or define specific formats more easily (eg. for parsing and
generating e-mail headers or HTTP cookies).
* Use a reference rather than a pointer for the output string, removing
the need for NULL checks (which were missing, anyway)
* Adjust callers to that change
* Add new Format variant taking a BDate argument
* There is a little code duplication. This will be moved to BFormat once
the time and datetime formatting is also moved out of BLocale
* The way to create a BDateFormat from a BLocale is still open for
discussion. I'm undecided between making BDateFormat a member of
BLocale, or adding a BDateFormat(const BLocale&) constructor.
* Adjust all users of the API.
A BGeolocation object can query an online service to get geolocation
and geotagging data:
* LocateSelf() tries to locate the machine it is running on, by using an
online database of wifi access points
* Locate() (not yet implemented) searches a BString and converts it to
lat/lon coordinates (reverse geotagging)
* Name() (not yet implemented) finds a suitable name for the given
coordinates (address, building name, or anything fitting).
The default service used is openbmap.org, which is freely available but
not very accurate. A request has been sent to Mozilla to use MLS
(Mozilla Location Services), which is a bit more accurate but needs an
API key. MLS is used for geolocation on FirefoxOS, for mobile phones
which don't have a GPS, and the data can be contributed by Firefox for
Android or the dedicated MozStumbler app.
Alternatively, Google Maps also provide the service, but wants
people to pay for it. Google Maps data is more accurate as all Android
devices contribute data to it.
All 3 services use the same JSON-based API: we send a list of reachable
Wifi APs (mac address and signal strength), and we get lattitude and
longitude information, and possibly extra data which will currently be
unused.
This can be used to implement HTML5 geolocation with reasonably accurate
results, but it can also be used in other places. For example
FirstBootPrompt could try to guess a list of most likely languages and
keyboard layouts from it (if wifi is working at install time, that is).
* Move default context management to BUrlRequest since some code
(including the testsuite) bypass the BUrlProtocolRoster.
* Introduce proxy host and port in BUrlContext
* Have BHttpRequest use the proxy when making requests
Comments to #9672 agree that there's really no need to
expose the dev_t handle, thus simplifying the API.
The dev_t handle, if required, can be retrieved via
BPartition::GetVolume() instead.
This patch adds user_access() which can be used to gracefully handle
page faults that may happen when accessing user memory. It is used
by arch_cpu_user{memcpy, memset, strlcpy}() to allow using optimized
functions from the standard library.
Currently only x64 uses this, but nothing really is arch specific here.
Signed-off-by: Paweł Dziepak <pdziepak@quarnos.org>
The kernel is allowed to use fpu anywhere so we must make sure that
user state is not clobbered by saving fpu state at interrupt entry.
There is no need to do that in case of system calls since all fpu
data registers are caller saved.
We do not need, though, to save the whole fpu state at task swich
(again, thanks to calling convention). Only status and control
registers are preserved. This patch actually adds xmm0-15 register
to clobber list of task swich code, but the only reason of that is
to make sure that nothing bad happens inside the function that
executes that task swich. Inspection of the generated code shows
that no xmm registers are actually saved.
Signed-off-by: Paweł Dziepak <pdziepak@quarnos.org>
Enable SSE as a part of the "preparation of the environment to run any
C or C++ code" in the entry points of stage2 bootloader.
SSE2 is going to be used by memset() and memcpy().
Signed-off-by: Paweł Dziepak <pdziepak@quarnos.org>
There is absolutely no reason for these functions to be in commpage,
they don't do anything that involves the kernel in any way.
Additionaly, this patch rewrites memset and memcpy to C++, current
implementation is quite simple (though it may perform surprisingly
well when dealing with large buffers on cpus with ermsb). Better
versions are coming soon.
Signed-off-by: Paweł Dziepak <pdziepak@quarnos.org>
The possibility to specify custom memcpy and memset implementations
in cpu modules is currently unused and there is generally no point
in such feature.
There are only 2 x86 vendors that really matter and there isn't
very big difference in performance of the generic optmized versions
of these funcions across different models. Even if we wanted different
versions of memset and memcpy depending on the processor model or
features much better solution would be to use STT_GNU_IFUNC and save
one indirect call.
Long story short, we don't really benefit in any way from
get_optimized_functions and the feature it implements and it only adds
unnecessary complexity to the code.
Signed-off-by: Paweł Dziepak <pdziepak@quarnos.org>
* Removes default mapping of a portion of the RAM (will be done
as needed)
* Passes on the page directory area to kernel, so on early vm init
the kernel can use the area for pagetable allocation.
* Leaves it to the platform to pass in physical memory range(s). This
will ultimately come from FDT.
* Fix long standing issue with allocation of the heap, potentially
causing other part of the bootloader to overwrite the heap.
* Implements pagetable allocator in kernel for early vm mapping.
This fixes the first PANIC seen, we now just get the same one later
on when the VM is up... more to come...
This reverts commit 3fbb24680c.
As I mentioned in #11131, this fix is not correct, and works around
the problem. The real reason was that arch_debug_call_with_fault_handler
was not working properly, so the fault handler went crazy.
With commit eb92810 that is fixed so this can be reverted.
This reverts commit 34dbbb65fd.
Instead, we can remove thos from HaikuBuildCompatibility and things will work fine, unless one try t build Haiku on BeOS (this isn't
supported anymore) or a very old Haiku which esdon't have those.
Pawel changed the implementation but I see no reason to make those available only from C++, so it must be an oversight.
Fixes building Haiku on Haiku which otherwise hits a mismatch in build compatibility headers.
If GCC knows what these functions are actually doing the resulting
code can be optimized better what is especially noticeable in case of
invocations of atomic_{or,and}() that ignore the result. Obviously,
everything is inlined what also improves performance.
Signed-off-by: Paweł Dziepak <pdziepak@quarnos.org>
Based on an earlier piece of source code of mine that parsed JSON into
QObjects, this JSON parser creates a BMessage tree.
Will be used by Stephan in HaikuDepot for communication with the web app.
* From now on, the gcc-specific system libraries (libgcc, libsupc++ and
libstdc++) are provided by separate packages built along with gcc:
- gcc_syslibs contains the shared libraries (libgcc_s.so, libsupc++.so and
libstdc++.so)
- gcc_syslibs_devel contains the static libraries and both c++ and gcc
headers
The shared libraries now make proper use of symbol versioning and there
are version-specific symlinks
* The buildsystem has been adjusted to no longer use the libraries and
headers from the cross-compiler, but use the ones provided by the
above-mentioned packages. The only exception is that the 32-bit libraries
required for the bootloader of the x86_64 architecture are still taken
from the cross-compiler.
* The new libstdc++.so contains program headers of type PT_RELRO (for
making segments read-only after relocation). While the actual feature
has not been implemented, the runtime_loader should now silently
accept (and ignore) those program headers.
instead or additionally to string.h, in preparation for functions move.
* moves str[n]casecmp() functions and others to strings.h.
* strings.h doesn't include string.h anymore.
* this solves #10949
- This allows a BMediaDecoder (e.g. FFMPEG Plugin) to communicate back format
changes to its clients.
For a more thorough explanation and discussion see haiku-development mailing
list: http://www.freelists.org/post/haiku-development/Request-for-protest-Media-Kit-Extend-media-header-struct
- Backwards compatibility is taken into account and preserved by reducing the
relevant _reserved[] fields.
- Code changes that will actually make use of these extensions are due for the
following commits. As these structure extensions affect several Haiku
components (e.g. media_server, MediaPlayer, etc.) and third party apps (e.g.
StampTV, etc.) I refrain from committing them in one batch with this commit.
This should make it easier to track down bugs originating in this code
change.
(cherry picked from commit 806b6888d2dcf84b4934f8f137a48d3381864d1c)
* This is a header used by several parts of the code which should not
need to know about ELF symbol overriding and the fact that it is
optional.
* When the define is set, the methods will not be defined, but they
shouldn't be called, either
* This makes sure the memory layout of the class stays the same with the
define set or unset, and users can rely on it.
Fixes UnitTester on gcc2.
* Remove unneeded field fOutputHeaders and convert it to a local for the
only method that uses it,
* Don't return EOVERFLOW when flushing data from ZLib (the ZLib
decompressor returns this, but zlib docs states that this is NOT an
error condition).
* Replace unneeded temporary BNetBuffer of fixed size with BStackOrHeapArray.
Double checked BeOS R5 & Haiku R1/A4 and BTextView should be 356
bytes, somewhere since then we've added 4 bytes. So, this commit
reduces the class size from 360 back to 356 by removing 1 reserved
int32 (instead of 2).
I believe the class size changed in hrev46798 as a result of adding
2 bools (1 byte each padded out to 4 bytes).
Sorry for the noise.
In hrev46796 I added two new private methods: _PreviousLineStart(),
and _NextLineEnd() which increased the size of the class breaking
binary compatability because I forgot to decrement the reserved array.
This commit decrements the reserved array restoring the class size
to the original size fixing the binary compat issue.
Thanks Axel for noticing.
The order is updated so the virtual methods appear in the same order
that they did in BeOS R5 with methods new to Haiku added to the bottom.
Perform() moves up, all other methods move below GetDragParameters(),
the last virtual method in BeOS R5's TextView.h.
* receiveEnd is set in a different place in case of chunked transfers,
which would cause the decompressor to never be flushed.
* In the case of chunked transfers, we call Flush() without any input
data (to flush only whatever is remaining in the decompression buffer).
This causes ZLib to return Z_BUF_ERROR which is translated to
B_BUFFER_OVERFLOW. This is a non-fatal error and is expected behavior in
that case. Don't handle this as an error, and do use the extracted data.
Fixes various cases of missing the last chunk of a page (pastie.org,
Google search results, and more).
Accidentally renamed these in the header, rename them back to
match the cpp file. These param names might not be very good but
they match the struct variable names. They are private methods
anyway. No functional change intended in either commit.
Besides that this is a nicer interface, it allows us to get a the HPKG
header as a side effect of initializing the reader, thus preventing
seeking backward in the file. This makes "package recompress - <file>"
work.
* Prefix lock functions with __ to mark them as private. Add
forwarding macros to keep existing code working.
* Avoids symbol name clashes with kernel lock APIs, occuring when
using kernellandemu-lib in userlandfs. Thanks to Ingo for the
suggestion.
Until now we always declared in the HPKG header that the package file is
zlib compressed. For uncompressed files we would just store all
individual chunks uncompressed. Now we handle completely uncompressed
files slightly differently: We don't write the redundant chunk size
table anymore. The size savings are minor, but it makes the uncompressed
format read-streamable which may be handy.
* PackageFileHeap{Reader,Writer} as well as Package{Reader,Writer} and
their implementation and super classes do now internally use a
BPositionIO instead of a FD to access the package file. This provides
more flexibility needed for features to come.
* BPackageReader has already grown a new Init() version with a
BPositionIO* parameter.
Simple BPositionIO implementation using the POSIX API on a FD. In effect
similar to BFile, but more easily ported to kernel and boot loader (and
the FD is reusable).
* Add support for hubs in AllocateDevice().
* Prevent page fault in FinishTransfers().
* Set fCapabilityLength
* Correct in BIOS ownership code
* Fix context errors in _InsertEndpointForPipe().
* Update constants according to latest Specification (v1.1)
* Fix SMI code (reference
http://lkml.iu.edu/hypermail/linux/kernel/1204.2/02460.html).
* Fix Memory/Device-Slot leaks.
* Fix area allocation for TRBs.
* Fix for Intel Lynx Point and Panther Point chipsets. Also move init
of xhci before ehci, to switch USB 2.0 ports before the ehci module
discovers them.
Signed-off-by: Jérôme Duval <jerome.duval@gmail.com>
* Ingo copied the methods into a shared location, and then obviously
"forgot" to let BFS use them. As a side note for Ingo: the complete
error GCC reported was "std::fssh_size_t" not defined with the macro
wrapper as code location. The actual problem was a "using std::size_t"
in some C++ header that accidentally got included after the wrapper.
* The shared Query code is not yet used. That'll be done another time.
* Renamed BFS_SHELL define to FS_SHELL, such that QueryParserUtils can be
used in any file system shell, not just the bfs_shell.
* BCompressionAlgorithm is a base class for classes that provide
compression/decompression functionality. There are methods for
compressing/decompressing a single buffer and factory methods for
a compressing/decompressing input/output BDataIO.
* BZlibCompressionAlgorithm is a BCompressionAlgorithm implementation
using zlib.
The only purpose of this was to use the installed version of Errors.h,
which isn't strictly needed and create some annoyance when new error
codes are added.
Keep the brief description as a regular comment above each public method.
Leave the docs of private methods.
Some variable renaming mostly because of abbreviations.
Add documentation for all the public methods and app_info members and defines
that didn't have docs in the cpp file.
This allows adding new error codes to the libbe_build without breaking
the build on older Haiku versions.
Fixes the build for the newly introduced B_PARTIAL_READ and
B_PARTIAL_WRITE.
* FDDataWriter and ZlibDataWriter weren't used anymore.
* AbstractDataWriter was implemented only by PackageFileHeapWriter,
which was only used by WriterImplBase.
* Add a PackageFileHeapWriter::AddDataThrows() which has semantics
equivalent to the previously inherited WriteDataThrows().
While enums are presented much more clearly in the docs and the values didn't
change this apparently caused some issues so we're going back to using #defines.
Also update the docs changing the \var tags to \def tag and putting the description
in a \brief tag.
No functional changes intended.
* Some variable renaming for clarity and consistency.
* Pointer style fixes.
* Added private method documentation back to cpp files for some methods.
Can be requested/stopped via BPackageRoster::{Start,Stop}Watching().
The notification message has the what code B_PACKAGE_UPDATE and contains
fields "event", "location", and "change count".
* The Install() and Update() versions that take a const char* array
now check whether a string looks like a path to a local package file.
If so, they use that file instead of interpreting the string as a
search string.
* Extend the repository hierarchy. There's now a LocalRepository base
class from which InstalledRepository and the new MiscLocalRepository
derive. The latter is instantiated once and collects all package files
specified by path.
* BFatalErrorException: Add commitTransactionResult property and
respective constructor. In case committing the transaction failed,
BPackageManager throws a BFatalErrorException with the result.
* BFatalErrorException::UserInteractionHandler: Pass
BCommitTransactionResult to ProgressTransactionCommitted().
* BDaemonClient: Move inner class BCommitTransactionResult to top level
and make it public.
* BCommitTransactionResult:
- Add a whole bunch of specific error code enum values. Such an error
code is now the primary error, as opposed to before where we would
mix status_t and enum value errors. There's a systemError property
of type status_t which may provide additional information, though
(depending on the primary error type).
- Remove the errorMessage property. Due to mapping all errors to the
specific error codes this is no longer necessary. Mixing such a
message with another error description is also not very helpful when
it comes to localization (still not supported, though).
- Add several properties (paths, strings, error codes) that serve as
arguments to the primary error and are used by FullErrorMessage().
- Add issues property, a list of instances of new class
BTransactionIssue. Those describe non-critical issues (e.g. failed
update of a settings file) that occurred in the process of
committing the transaction. Those issues should be presented to the
user by the package management program.
* Exception: Adjust to transport the BCommitTransactionResult
properties.
* CommitTransactionHandler, FsTransactions, Root, Volume: Adjust to
BCommitTransactionResult/Exception changes.
* CommitTransactionHandler: Now requires a BCommitTransactionResult to
which it adds the issues it encounters. The reply BMessage is no
longer needed, though.
* Volume: Refactor common code from the three methods that use
CommitTransactionHandler into new method _CommitTransaction.
Add GetPathOrName() and PathOrName() methods which try to get some kind
of usable path or at least a file name for the entry. Useful mainly for
debugging and error reporting cases.
When an ARMv7 CPU is detected, immediately turn on the FPU. This allows
us to use vsnprintf in the TRACE call in that function, as our libc is
compiled with floating point support and will trigger a fault if the FPU
is not available.
This lets the boot go further, and crash in mmu_init. Next steps:
* Find why mmu_init is crashing
* Setup some fault handlers, otherwise we call uboot ones, and they are
not very helpful. They will also probably not work once the mmu is
enabledvery helpful. They will also probably not work once the mmu is
enabledvery helpful. They will also probably not work once the mmu is
enabled...
No functional change intended.
Focused on documented classes only.
* Update copyright information.
* whitespace fixes.
* pointer style
* Rename some variables, msg => message, form => what
* Need consistent variable names to make documentation easier,
allows us to use \copydoc or \copydetails instead of repeating
ourselves over and over again.
* The Network Kit now makes use of it for BUrlContext, so we need this
in the public headers.
* Problem caught by the new build bot by compiling the unit tests.
* Each BHttpAuthentication object is locked on all field accesses,
* They are owned by the BUrlContext and never deleted, so there is no
need for reference-counting them,
* The BUrlContext itself is now reference counted, and all BUrlRequests
hold a reference to it.
This makes sure using the BHttpAuthentication objects from requests is
thread-safe.
* Change the semantics of the iterators copy constructor and assignment
operator: they now return a new iterator for the same cookie jar (and
same url for the UrlIterator). They don't try to point to the same
position as the copied iterator. The only purpose of these is to write
code such as:
Iterator it = jar.GetIterator();
so having a full copy isn't that useful.
* The per-domain cookie lists are now protected with a read-write lock.
The iterators retain a read lock while they are handling cookies from
that list. They get a write lock when doing Remove. Adding a cookie to
the jar also gets the write lock for the matching list
* Fix a memory leak when adding a new domain-list to the jar failed
* Simplify the declaration of the PrivateHashMap type (it would be
even simpler if HashMap was a public API)
* The domain hashmap is now a SynchronizedHashMap. It is locked as long
as an Iterator or UrlIterator exists, which may be a problem as these
are public APIs. Writing safe iterators for an hashmap with concurrent
accesses is not easy, so the API could be modified to return a list of
domains and a list of cookies for a given domain or URL instead. This
would suit the intended uses just as well.
* The jar now store const cookies, so there is no need to lock them for
access/modification. Updating a cookie is done by replacing it with
another one in the jar (with the same domain and value). There is still
the problem of deleting a cookie while other threads may still access
it, this will be fixed by making cookies BReferenceable.
These were getting out of sync and causing trouble, and they are easy to
compute from existing information.
Fixes some problems detected by the testsuite where the user/password or
the host would sometime disappear from the URL.
No functional changes intended.
* Updated copyright information.
* Reduced doxygen documentation down to a helpful summary
in a regular comment, the documentation has been moved into
the Haiku Book.
* Some parameter renaming for consistency and clarity.
* A few other style fixes.
* This avoids polluting the Haiku headers with host issues,
as pointed out by Axel.
* Should also resolve build issues for various versions of
host compilers that were introduced in previous commits.
* A problem with our gcc requires adding casts for gcc4 when
the __builtin_bswap functions are used with a format string
* Unlike gcc2, the __builtin_bswap functions do not get disabled
despite using -fno-builtins, hence added compiler check in
runtime_loader/utility.cpp
* Introduced in gcc-4.3 for at least Intel platforms
* On ARM, full support added in gcc-4.8
* Other platforms untested, left as-is
* This introduces a breaking change to the ABI for gcc4
* These aren't tested, but since we go off of DCE
versions for a lot of stuff, they may work.
* AMD doens't include market names in their drivers
anymore, so if we want to label them it will take
additional work.
This patch makes it possible to inline rdmsr and wrmsr instruction. The
performance impact shouldn't be significant since they are used relatively
rarely and wrmsr is usually a serializing instruction, but there is no reason
not to do so.
The goal of this patch is to amortize the cost of context switch by making
the compiler aware that context switch clobbers all registers. Because all
register need to be saved anyway there is no additional cost of using
callee saved register in the function that does the context switch.
Similarly to previous patch regarding GDT this is mostly a rewrite of
IDT handling code from C to C++. Thanks to constexpr IDT is now entirely
generated at compile-time.
Virtually no functional change, just rewriting the code from
"C in *.cpp files" to C++. Use of constexpr may be advantageous but
that code is not performance critical anyway.
This patch introduces support of ELF based TLS handling with lazy allocation
and initalization of TLS block for each DSO and thread. The implementation
generally follows the official ABI except that generation counter in dtv
is in fact a pointer to Generation object that contains both generation
counter and size of the dtv. That simplified the implementation a bit, but
could be changed later. The ABI requirements regariding in memory position
of TLS block is not honoured what results in static TLS model being
unsupported. However, that should not be a problem as long as
"executables" in Haiku are in fact shared objects and optimizations which
require specific TLS block in memory layout are not possible anyway.
* Nothing ever reads fTargetName in the scrollbar code, so remove the
field.
* Frees one reserved slot, and a little memory, as the target name was
copied with strdup.
* The ptrdiff_t limits are PTRDIFF_MIN and PTRDIFF_MAX, not PTDIFF_*.
* I could not find any non-Haiku reference to PTDIFF_*, so I guess
that's a mistake.
* Instead of forcing the hash-table to use a copy of the key,
introduce and use TypeOperation template to avoid taking a
reference of a reference type (which gcc2 doesn't allow).
* PackageFSVolumeInfo: Add the directories for all relevant states.
* PackageFSPackageInfo: Include the package file's parent directory node
ref.
Package daemon and package kit still don't support old states yet.
For potential boot volumes with older packages states the respective
item in the boot volume menu now has a sub menu for selecting a state.
The boot loader functionality for this feature is complete -- i.e. the
respective kernel is loaded and the name of the old state is added to
the kernel args -- but kernel packagefs and package daemon support is
still missing.
* The DataReceived hook gets a position argument, making it possible for
listeners to handle out-of-order data (from two range requests at
different positions, for example)
* Adjust HaikuDepot (only user of the API in our sources)
* Add a copy constructor to HTTPRequest that copies the relevant
parameters from an existing request. Makes it easy to repeat a request
with a different range. Could be useful for restarting downloads, or
paralellizing them.
* Add SetRangeStart, SetRangeEnd calls to HTTPRequest, no implementation
yet. I'm putting all the API changes in this commit as it needs to be
synced with a matching haikuwebkit release.
* All archs must update to HaikuWebkit 1.3.0. Previous versions are
broken by this.
... in filenames. Replace the existing Unicode conversion functions
with UTF conversion functions from js that he relicensed MIT for us.
Put the UTF conversion functions in a private but shared code location
so that they can be accessed throughout the kernel.
Right now we only provide functions to convert between UTF-8 and UTF-16.
At some point we should also add functions to convert between UTF-8 and
UTF-32 and UTF-16 and UTF-32 but these aren't needed by exfat.
Remove the old Unicode conversion functions from exfat as they assumed
UCS-2 characters and don't work with UTF-16 used by exfat.
Rename most variables with the term length with code unit where code units
are intended. The term length, when used, means length in bytes while code
units represent either a full 2-byte UTF-16 character or half a 4-byte
surrogate pair.
Create and use BLayoutUtils::AlignOnRect() to position the button label
in BControlLook::DrawLabel().
AlignOnRect(), unlike AlignInFrame(), provides the possibility to return
a rectangle with dimensions greater than the available size.
Add some comments above the methods in LayoutUtils that indicate such.
Also update copyright headers in LayoutUtils and ControlLook
The media server tried to use node monitoring to dynamically add and
remove plug-ins, but it isn't that useful:
* When a plug-in is added, applications would have to query the media
server to get an up to date list of available formats. For example
MediaConvert populates its format menus on startup.
* When removing a plugin, if an app already had it loaded, there is not
much that can be done to keep it working.
* The list of plugins was not sorted by directories (user vs system
add-ons), so the directories were re-scanned to make sure user add-ons
were returned first, rendering the node monitoring less interesting.
Now, the format handling is done by each application. The node
monitoring is removed, instead the apps will scan the plugin directory
when first using the media kit classes. Restarting the application is
needed to update the media formats list.
...when sending the whole view state over the link.
Also inherit the fill rule when pushing states (DrawState
copy constructor). A somewhat sloppy oversight, I must add.
* I don't know what I am doing here, but the test app_server only
ever built for me recently when I disabled the define, so I might
as well commit this...
After load_image() the child thread is suspended and the parent is
expected to resume it later. However, it is possible that the parent
attempts to resume its child after it has been notified that the image
had been loaded but before the child managed to suspend itself. In such
case the child would suspends itself after that wake up attempt and,
consequently will not be ever resumed.
To mitigate that problem flag Thread::going_to_suspend has been added
which helps synchronizing thread suspension and continuation in a similar
way that "traditional" thread blocking is performed. This means that
the child should behave in a following manner: set its going_to_suspend flag,
notify the parent (i.e. any thread that may want to resume it), acquire
its scheduler_lock and suspend itself if the going_to_suspend flag is set.
The parent should follow pattern: clear going_to_suspend flag of the thread
that is about to be resumed, acquire that thread scheduler_lock and enqueue
it in a run queue if it is suspended.
Thanks Oliver for reporting the bug and identifying what causes it.
Most of the actual UserEvent work is done in DPC so that we don't have
to care about the limitations of the context in which UserEvent::Fire()
is invoked. This requires appropriate management of lifetime of UserEvent
instances to make sure that DoDPC() method is always called on a valid
object.
This fixes building openssh on the bootstrap image.
The real problem is that it picks up this file instead of the histedit.h
from libedit, though. But since this include was missing anyway, it
makes sense to fix this file, too.
* BView gets SetFillRule/FillRule methods. The fill rule is part of the
view state.
* The B_NONZERO rule is the default. This is what we implemented before.
* The B_EVEN_ODD rule is the other common possibility for this, and
we need to support it to help WebKit to render properly.
* Add isb just because.
* pdziepak pointed out that ARMv5 and before
had different barrier support.
* pdziepak also mentioned that dsb was too strong
for __sync_synchronize
* On ARMv6 or older, we do a simulated dsb.
* Move __sync_synchronize into thread.c in libroot
and use the new arch_atomic.h dsb/dmb defines.
* Gets arm @bootstrap-raw to end of bootstrap.
* Don't assume verdex as it isn't clear this was
occurring.
* Make an educated guess on HAIKU_BOOT_PLATFORM
based on provided board (but still allow it to
be overridden)
* Error out if user doesn't populate
HAIKU_BOOT_PLATFORM or enters an unknown board
name.
* You need to add "-sHAIKU_BOOT_BOARD=xxx" to
your jam to build for the proper ARM device.
* Rename beagle to beagleboneblk as per the
documentation.
* BSecureSocket::CertificateVerificationFailed() took a BCertificate
instance by value as parameter.
BCertificate deletes internal data in its destructor. Passing an
object by value creates a copy, so the copy attempted to delete
the internal data again during its destruction.
This caused mail_daemon to crash here when it came across a failed
certificate.
* Fix: pass BCertificate object as reference.
* Was causing LLVM to fail to build on x86_64
* Make XINT64 adjust based on architecture like
config/types.h to ensure these macros match
uint64 and int64 at all times.
* Resolves#10566
* Use atomic_get_and_set for return value
* Atomics are no longer volatile
* Add missing arch_cpu_pause stub
* Move arch_cpu_idle to arch_cpu header to match
other architectures
* This will be used to implement compressed http streams
* Remove the custom BDataOutput class, and use BDataIO instead, for
easier integration with existing code.
inline const floats are a gcc extension. It is possible to do it in a
standard way in C++11 using constexpr, but then gcc will reject the
previously accepted nonstandard syntax.
* ... instead of queuing it for the job thread. The advantage is that
the request will be handled immediately and clients won't have to wait
for transactions (which may even require user feedback) to finish. It
complicates Volume a bit, since there are now two threads that may
access it. The shared data have been moved to a State object which is
protected by a lock.
* For commit transaction requests check whether another package request
is already pending/in progress before queuing a job. Fail immediately,
if there is.
Fixes bug #10039.
Everything untested, but compiles, so it must work. The idea is to introduce
BAffineTransform additionally to the existing Origin and Scale properties of
BViews. One may use it in parallel or as an alternative. Painter in app_server
is not yet aware of the additional transformation. It is however already used
to transform drawing coordinates. It probably needs to work differently,
perhaps only in Painter and AGGTextRenderer.
* This is less pretty, but we need access to the connector
to find the HPD gpio pin mask on the card.
* dp_aux communications seem to work again.
* If you have a DisplayPort item attached to your card you
may want to just unplug it at this point. We attempt DP
link training and it fails. This failure will also cause
other monitors to not function as app_server still isn't
multi-head aware (#10486)
This is required on OS X and other systems which do not have the glibc
extensions for regular expressions (FreeBSD is not one of them as it
already includes gnuregex in /usr). With this there are no hardcoded
non-standard paths for OS X anymore.
regex.c and regex.h are from the official gnuregex 0.12 distribution,
the only modification is that I added __BEGIN_DECLS and __END_DECLS to
regex.h.
Make Cmd+Left and Cmd+Right work the same as Option+Left and
Option+Right, that is, they do word-wise navigation.
Make Option+Up go to beginning of paragraph and Option+Down go to end
of paragraph like Cmd+Left and Cmd+Right used to.
Unfortunately option shortcuts are currently eaten by S&T until #9431
gets fixed.
* Command+Left goes to beginning of line, ignoring softwrap
* Command+Right goes to the end of line, ignoring softwrap
* Home goes to beginning of line, accounting for softwrap
* End goes to end of line, accounting for softwrap
* Option+Left goes to previous word
* Option+Right goes to next word
* Command+Home and Command+Up go to beginning of document
* Command+End and Command+Down go to end of document
Shift with any of the above also selects the text.
This is similar to how the text editor Eddie works.
For non-US keyboards, the extra 102th/105th key is used to reach \. But,
we also need it to report | when shifted (this is the key left to
"enter").
This affects only USB keyboards. Thanks to gordoncjp for reporting!
Add SetSupportedTypes() and SetIcon[ForType]() versions with an
additional bool updateMimeDB parameter. If false, the method doesn't
update the MIME DB entries for the type.
When switching AppMetaMimeCreator from BMimeType to Database the
SetIcon[ForType]() calls with a BBitmap* ended up calling the vector
icon version with the icon_size as the data size argument, thus not only
not writing the bitmap icon attributes, but also clobbering the vector
icon attribute.
* BSolver/LibsolvSolver: Add FullSync() method. It uses libsolv's
SOLVER_DISTUPGRADE mode.
* BPackageManager: Add FullSync() using the new solver mode.
* pkgman: Add full-sync command.
The new command is similar to the update command without arguments, just
more aggressive, allowing downgrading or even removal of packages, to
match the state of the repositories. Just like "update" it doesn't work
properly yet.
UserEvent can be fired from scheduler_reschedule() i.e. while holding current
thread scheduler_lock. If the current thread goes sleep and during reschedule
one of its timers sends a signel to it, then scheduler_enqueue_in_run_queue()
attempts to acquire again its scheduler_lock resulting in a deadlock.
There was also a minor issue with both scheduler_reschedule() and
scheduler_enqueue_in_run_queue() acquiring current CPU scheduler mode lock.
Some websites set cookies expiring in the (not so) far future, after year 2038.
So, using time_t to store the cookie expiration date won't do. Use the
BDateTime class instead.
This makes goodsearch.com login work again (#10460).
Adjust Database{Location} to only attempt to create a mimetype when
actually necessary, and fail otherwise if a writable version doesn't yet
exist. Correspondingly, adjust callers such as
DatabaseLocation::DeleteAttribute(). Fixes a problem where a caller asking
to perform a mimeset could fail early due to SetSupportedTypes() attempting
to update the read-only mime database entry supplied by a package, and
consequently most of the mimeset operations would be skipped.
* Fix incorrect cpu vendor name mapping
* Add additional CPU architectures
* Add additional CPU vendors
* Rework PowerPC arch_system_info passing
PVR back for cpu model
* Set max cpu to 1 for PPC until atomic functions are finished
* We have atomic functions inline in the kernel and assembly
code in libroot post-scheduler merge... isn't that a lot of
duplication?
Add boot loader debug menu option "Save syslog from previous session
during boot". If enabled (defaults to true), the previous session's
debug syslog data is copy to a separate buffer and passed to the
kernel, which writes it back to the file /var/log/previous_syslog.
As long as Haiku still boots, this should now be the most convenient way
to retrieve the output from a kernel crash.
https://github.com/druga/haiku-stuff/tree/master/intel_extreme
Rebased against current sources.
* The BIOS video mode sometimes reports a scaled mode instead of the
physical panel dimensions. Get the data from the VBT table as well, and
use it if the reported resolution is bigger.
* On first boot, force the panel native mode so the user doesn't have to
set it manually.
* Only allow a single head at a time on i855gm, as the card can't drive
both heads at the same time.
* Detect when a new requested mode is the same as the current one, and
skip modesetting in that case. Avoids screen flickering when changing
workspaces.
* Fix some cases of misdetecting which pipes to enable
* Instead of creating an OpenSSL context ofor each socket, use a global
one and initialize it lazily when the first SecureSocket is created
* Load the certificates from our certificate list so SSL certificates
sent by servers can be validated.
* Add a callback for signalling that certificate validation failed, the
default implementation proceeds with the connection anyway (to keep the
old behavior).
* Introduce BCertificate class, that provides some information about a
certificate. Currently it's only used by the callback mentionned above,
but it will be possible to get the leaf certificate for the connection
after it's established.
Review of the API and implementation is welcome, before I start making
use of this in HttpRequest and WebKit to allow the user to accept new
certificates.
Use standard error codes instead.
This allows using error code returned by the underlying functions
directly, and makes it possible to use strerror for debugging. So, we
can also remove StatusString() from the various *Request classes.
Previous implementation based on the actual load of each core and share
each thread has in that load turned up to be very problematic when
balancing load on very heavily loaded systems (i.e. more threads
consuming all available CPU time than there is logical CPUs).
The new approach is to estimate how much load would a thread produce
if it had all CPU time only for itself. Summing such load estimations
of each thread assigned to a given core we get a rank that contains
much more information than just simple actual core load.
* Previously PE binaries would trigger the "incorrectly
executable" dialog. Now we get a special message for
B_LEGACY_EXECUTABLE and B_UNKNOWN_EXECUTABLE
* Legacy at the moment is a R3 x86 PE binary. This could
be extended to gcc2 binaries someday far, far, down the
road though
* The check for legacy is based on a PE flag I see
set on every R3 binary (that isn't set on dos ones)
* Unknown is something we know *is* an executable, but
can't do anything with (such as an MSDOS or Windows
application)
* No performance drops as we do the PE scan last
* Tested on x86 and x86_gcc2
This field forces kernel to track each CPU load all the time. It is not
a problem with the current scheduler on a multicore systems, but on
single core machnies or with any other future scheduler this field may
become just an unnecessary burden. It isn't difficult for an application
to compute CPU load by itself when it needs it.
When calling Stop(), we expect the request thread to exit as soon as
possible. Closing the connection unlocks it from any blocking read() or
write(), avoiding some lockup situations.
* My BeagleBone gcc defines __ARMEL__ but not
__ARM__ which breaks the native tool builds
* As ARM was originally Little Endian, we assume
__ARM__ means as such.
* Look for Big Endian ARM and define the needed big
endian preprocessors
* Add behavior constant B_POP_UP_BEHAVIOR which adds a pop-up marker
to the button (similar to that of BMenuField).
* Add methods [Set]PopUpMessage(). To set/get the the message that is
sent to the button's target when the pop-up marker is clicked.
