busses/pci/x86: add
Other add-ons are in following commits.
Change-Id: I7a77bfaef0e8995917b4b54c8369d7075533ec26
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6220
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
They are not about reading and writing pages, but just iovecs.
As the passed iovecs use void*s, it can't possibly be working with
physical pages on 32-bit systems with PAE.
It appears nothing uses or implements these functions anyway,
as there was nothing else in the tree I had to adjust after making
this change...
* aborted transfers will release the notify semaphore when the cancel is notified.
* the allocated buffer would be freed on return, while the usb stack eventually copied
data in the buffer in our back, leading to KDL crashes, because the freed buffer would
be right reallocated for some kernel team structures.
* regression introduced by hrev55806, the transfers didn't need to be cancelled before.
Change-Id: Ifb6e941f71d05c37c36f878059c33883bb72a67c
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5905
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
the entropy source is read every second and pushed to the PRNG.
the PCI device is tested, not the ACPI.
Change-Id: I9bb6b21c7189b28a1d8a624d83b33ff6682152dc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5825
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
only scsi_disk checks the actual value, other drivers take the logical block size.
This change reports the physical block size from the disk rather than the block
size used by IDE/SATA/SCSI commands. On typical modern SATA disks, the SATA
commands will use 512 byte blocks, but the disk will actually read and write
4K blocks internally. This is only of importance for partition alignment for DriveSetup,
and is independant of file systems or partitioning systems. This could also influence
the recommended block size for some file systems.
Change-Id: Id0f2e22659e89fcef64c1f8d04f81cd68995e01f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5667
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
bus_type has been added to MediaRoster.h and the serial driver.
It is not used enough to be in any shared header.
media_roster only uses it for buffer size estimation.
Change-Id: If4f372d44e871230da4744d99ec7cde0c79c8344
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5209
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
This reverts commit 8497a2cc28.
The VFS layer is not at all ready for this. Many places in the
code implicitly assume ino_t values will never change. This
functionality is only necessary for live shrinking of partitions,
which is a feature niche enough we do not need to worry about
implementing it in the first round of resizing (if ever.)
* Working under qemu smp 1,2+
* Working on SiFive Unmatched
* x86_64 efi not broken by smp_boot_other_cpus change
Change-Id: I32ebc17913e46ed082be9ade8f56448bbf12f16e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4705
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
The code in this module was derived from the one in driver/tty. However,
the driver uses a shared lock between the master and slave side of a
TTY, and this was changed to use two separate locks. The approach with
two locks does not work. It seems the change was unfinished and the
second TTY was never locked. But attempting to lock it will result in
lock inversion problems, unless we do complicated things (try to find
which of the two TTY is the master side, and lock that first, for
example). It is simpler to restore the shared lock as used in the
driver.
To set up the shared lock, I modified the tty_create function to take a
pointer to the master TTY when creating the slave. Maybe it makes more
sense to create both sides in the same call, create_tty_pair?
However, this does not work as easily as I wanted, because there is some
recursion going on: at least in one case, the tty_control function is
calling the driver's tty_service function, which in turns attempts to
call back into tty_control for the "other side" TTY. To handle this
case, replace the mutex with a recursive_lock.
Fixes#17091, where the root problem was access to
other_tty->select_pool without locking. This was also made unconvenient
to debug because select_pool objects are self-deleting, when the last
item in the pool is removed. As a result, the code accessing it without
log would suddenly find out that the data it was accessing had been
freed and erased.
This also makes the TTY code in driver/tty and generic/tty a bit more
similar than it was before, and brings us one step closer to merging the
two together. There are still two main differences and I don't know
enough about TTY to decide if they are important, and which version
should be kept:
- The driver has extra code for "background" read and write. I don't
know what this is used for.
- The driver has a single "settings" instance shared by a master and
slave TTY, while the module has two separate instances, but seems to
copy one to the other. I'm not sure which approach is correct.
Change-Id: Ie2daddd027859ce32ba395af76b4f109f8b984b0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4604
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The USB Kit uses it, so this allows the USB Kit to stop including
USB3.h.
Change-Id: Ifde025ec41bef92013fda0440d60b7216cfdbe4a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4413
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Fixes:
* Use uint64 instead of off_t when handling offset and size
of the trimmed range in the fs_trim_data structure
* BlockAllocator::Trim: Correct the size of a buffer
* ram_disk, mmc: Do not trim past device capacity
Improvements:
* BlockAllocator::Trim: Because the received offset and size
are ignored by BFS (the functionality is not implemented yet),
return B_UNSUPPORTED if the range does not cover the whole
partition
* ram_disk, mmc: More accurate calculation of the number
of trimmed bytes
* devfs: Add a uint64 version of translate_partition_access()
Change-Id: I24f4c08674f123ad33a5fef6e28996a4ada6ff0d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4155
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
It is not present in BeOS R5 and it just call unload_driver_settings.
Replace delete_driver_settings usages with unload_driver_settings.
Keep the symbol on x86 for binary compatibility.
Change-Id: I1382710e3a4cb5c65d1249ea0e5880891e6800e4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3485
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Fixes bfs part of #10336. Untested on SATA (don't have a testing drive
to sacrifice) but working fine on SD/MMC.
This requires moving the copy from kernel to userland into the devfs. As
a result the code in the disk drivers becomes a bit simpler.
Also add some documentation for the common ioctls to implement for a
disk device.
Change-Id: Ie84b6a1d293828d33902a64b3c9d4b19aa6eacb1
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3640
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
This is probably incomplete. Is locking needed? Should we notify the
next writer (if any) that the port is writable when flushing the output?
Change-Id: I2566e2d036a61af4819894a44f57603179aa27df
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2516
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* This allows file systems to retrieve the actual error code on a
failure, and report it to the user.
* All affected file systems have been adjusted to the API change.
This is a binary incompatible change.
Change-Id: Id73392aaf9c6cb7d643ff9adcb8bf80f3037874c
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2913
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
type is acpi_handle, to be used with the ACPI bus manager
Change-Id: Ibbdd81a21bdd57fc651f7a7238e3676033204857
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2456
Reviewed-by: Rene Gollent <rene@gollent.com>
ACPI_DEVICE_HID_ITEM is now optional, instead of an empty string.
Change-Id: I352ffaaad377659f650a0b8c0d56e40a68b739c3
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2420
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
to find a node in the hierarchy.
Change-Id: Iee858f21ce134569bf25fccbef9fe18ea8787e9d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2419
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Not used by anything at all, and not included in the build.
Even the BeOS engineer who created it wrote in a Be Newsletter
that he was uncertain how useful it was, which is why BeOS
did not ship it as a kernel add-on...
There is no good reason to put them in a private header.
No functional change (but drivers now have access
to these constants.)
Change-Id: I7ac00a120ab44fbc110bc858dfd87d69d0061135
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2294
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: John Scipione <jscipione@gmail.com>
- Fix USB_hid_page_consumer.h: some values are skipped in the spec so
our defines were off
- Handle the horizontal wheel on my mouse which is declared as a
CON_AC_PAN, but otherwise works just like the vertical wheel
- Input server and interface kit already handle the events properly
(they were available for serial mice already).
Change-Id: Ie0080ebb27e9478bcfe9f9dc5fd2a936ae05a848
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2201
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
- Remove duplicate and otherwise unused lendian_bitfield.h
- Adjust listusb jamfile to use lendian_bitfield.h
- Fix various typos in usb_video.h and restore some fields to make
listusb happy
It now lives in OS.h. The idea is that this will now be
accessible to userland applications, so userland memory
is protected from access by other processes, just as
kernel memory is.
No functional change (the constants are still the same,
though I've changed some to use shifts to make clear
which bits are allocated are which are unused.)
The kernel version is only partially tested.
Change-Id: I9a2f6c78087154ab137eadbced99062a8a2dd688
Reviewed-on: https://review.haiku-os.org/c/918
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
