Reset the value of IsFirstClick to true whenever a new game is
started. Without this fix the board gets confused if there is
a card flipped when a game is restarted.
I can't reproduce any of the other oddities in the ticket but
this fixes the egregious repro case mentioned.
Fixes#6932
Change-Id: Ie5cedd7fc2ca411db722d3c24f68fe9aa48f7b5f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5038
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Some improvements to allow setting 8, 15, 16 and 32bit modes, and detect
the correct mode number after patching the BIOS automatically, instead
of hardcoding it.
Also move the patching code to a separate file.
Fixes#10570.
Change-Id: I920f448b59ad7373cb8595d92ce3fa52324be67e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4629
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This uses atombios headers to find where in the BIOS the video mode
tables is located. Then, we can replace entries in the table (in a RAM
copy of the BIOS, of course) and inject any video mode we need. To make
the table easy to find, the Atombios headers from the radeon_hd are
reused, but no atombios code execution takes place here.
Change-Id: If1981b1574822d4ce1e072dd6437a727192ce7cd
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4628
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Get the OEM string from the VESA info block (and also get the memory
size from there while we are at it). If the string is empty, use the
BIOS type (identified in other ways) to still report something.
Change-Id: I8cbd75d19f624a43db05e82d1e1b2a536cc418b6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4625
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The VESA standard does not define any way for software to set a custom
video mode, which means normally we would be constrained to whichever
modes the video card manufacturer decided to provide. However, since we
run the BIOS in an emulated environment, it is possible (and even quite
easy) to patch it and inject any video mode we want, provided we know
the format to use and where to put the info in.
This approach was used in the NewOS VESA driver, as well as in
915resolution (a tool that predates the availability of native drivers
for Linux for Intel videocards). Later on it was also used in Chameleon
and Clover, bootloaders that are used for hackintoshes (running MacOS on
unsupported hardware).
This commit implements full support for Intel cards only, AMD and NVidia
will be added later (but there is preliminary code to detect them)
Change-Id: I2c528ba18b3863f486da694860a10761efcbfb3f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4624
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
MSI was never implemented in this driver and only used for a log during
initialization. Remove it for now.
This makes it easier to use the driver on non-x86 systems where there is
no MSI.
Change-Id: I39ccbb82b78ea98c0d045ef07ee9bb28c775e292
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4847
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
* move common SMP initialization code to x86/arch_smp.cpp
* factor out arch-specific SMP initialization to
arch_smp_32.cpp resp arch_smp_64.cpp
* implement smp_trampoline for x86 32-bit EFI loader
* rename SMP trampoline for x86_64 to long_smp_trampoline
* add new argument virtKernelArgs to arch_smp_boot_other_cpus
as the kernel args are not identity mapped on 32-bit architectures
Change-Id: I30d0bb1fa9bfb08f6784a2af34eb83d6b64afa57
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4869
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
In the Terminal settings window, the pop-up help text for
"Tab title:" had two entries for "%% - The character '%'.".
Removed one of the entries.
Fixed the spelling of some constants: kTooTip* vs kToolTip*
Changing the window title and tab title directly will now
show the same tool-tips as the Terminal settings window.
Change-Id: Ic36cc1f8af0305b757105a229203115efee870c8
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4989
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Máximo Castañeda <antiswen@yahoo.es>
The options "Refuse in/output format changes" were meant to prevent
format changes of connections on the fly, without tearing down and
establishing a new connection.
The mixer does not support such format changes for input.
With this patch input format changes are refused - the former
default setting.
Output format changes are at least mostly implemented, so we are
allowing format changes here.
Both options get removed from the Audio mixer setup panel of the
Media preferences. The code those settings themselves is kept.
Thanks Máximo Castañeda for the investigation, see
https://www.freelists.org/post/haiku-development/Explain-the-Audio-Mixer-Setup-options-of-Media-preferences,26
Change-Id: Idb2d0674a4701014249bc5252a7e4ccedc4f532f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4934
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Use the User Read-only Thread ID Register aka TPIDRURO to store
TLS pointer.
The User Read-only Thread ID Register is read-only in User mode,
and read/write in privileged modes.
see: ARMv7 Architecture Reference Manual,
section B3.12.46 CP15 c13 Software Thread ID registers
Change-Id: I7bff2fd66f41d7bf1a8a247151bcd02b32733c1b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4994
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
init_hardware now takes 2 devices arrays: one for PCI and one for USB
drivers, respectively.
The few drivers that have their own __haiku_handle_fbsd_drivers_list
are also adjusted at the same time.
It is not yet wired in to the rest of the compatibilit layer;
that will happen in the next commits.
The bulk of the implementation is in usb.cpp; most of the
rest of the new files are copied from FreeBSD to varying degrees.
Otherwise we have a race (or worse): in the case where the transfer
has completed or is in the process of completion between CancelQueued
and here, the callback can still be invoked after we returned and
cause corruption.
Discovered while working on USB support in the FreeBSD compatibility
layer: a lock inversion problem meant these timeouts always occurred
but then the callback would be invoked later and corrupt stack.
With this change, such problems will instead cause deadlocks.
That's not an ideal situation to be in, but we should detect
such problems elsewhere and make them into asserts; deadlocks
are assuredly better than random memory corruption.
Previously they would just get "lost" and never signal completion.
(Considering how rare fragmented transfers are, this may not fix
any real problems.)
* Fixes functionality of TRACE statements on 64-bit platforms.
Change-Id: Iaba8f8b2d49ec1acda3fc2d51e24a207c5bcc97a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4992
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
* Resolves an issue compiling icu70
* FreeBSD is 262,144
* Linux is 2,097,152
* Haiku was 131,072
This roughly doubles the maximum args length, and makes us
function inline with FreeBSD today. If we're the shortest
straw, we're going to find a lot of things broken (such
as ICU 70.1) Matching FreeBSD means any limitations we see
will also be seen on FreeBSD, making fewer "Haiku issues".
Change-Id: I677c0523a2f27c9e9901fda4180445bcb6da31b2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4991
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Update as per Unicode 14 (and draft 15)
Include the noncharacters. We don't really want the .notdef glyph for
them, except for U+FDD1 which we have reserved internally to force it
from webkit.
Fixes#17593
Change-Id: I5a62bf0e7753adacc81ea19b3351deb58d5c0653
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4984
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
to find the RSDP, also try to find it in the EBDA area.
Fix trace build.
Change-Id: I94c3fbec9ea97b9187bf6b2c634298f6ae5b413c
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4981
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
These can be used on platforms that only support memory spaces
and have no other general restrictions. riscv is one such for now,
so this finally commits support for RISC-V in the FreeBSD compat layer.
