can safely be used.
* Since using the I/O APIC is disabled by default, I've removed the "return"
that prevented its use when enabled. Let's see if it already does anything.
* Adapted other arch_int.cpp with a bit of cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36290 a95241bf-73f2-0310-859d-f6bbb57e9c96
* use it in readonlybootprompt instead of previous workaround code.
This makes the readonlybootprompt faster and lighter as it doesn't open and parse all the catalogs anymore, but only checks for their existence.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36276 a95241bf-73f2-0310-859d-f6bbb57e9c96
driver, and that driver is using the raw_key_info structure as well.
* Renamed kb_mouse_driver.h to keyboard_mouse_driver.h.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36267 a95241bf-73f2-0310-859d-f6bbb57e9c96
in the PS/2 driver for now. The basic idea is to allow everyone to open the
device, but only allow one key reader (as usual). However, once someone
registers itself as a debugger, the original reader is blocked, and the
debugger can read the key presses instead.
* Renamed ps2_keyboard.c to .cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36256 a95241bf-73f2-0310-859d-f6bbb57e9c96
mapped page.
* debug_{mem,strl}cpy():
- Added "team" parameter for specifying the address space the address are
to be interpreted in.
- When the standard memcpy() (with fault handler) fails, fall back to
vm_debug_copy_page_memory().
* Added debug_is_debugged_team(): Predicate returning true, if the supplied
team_id refers to the same team debug_get_debugged_thread() belongs to.
* Added DebuggedThreadSetter class for scope-based debug_set_debugged_thread().
Made use of it in several debugger functions.
* print_demangled_call() (x86): Fixed unsafe memory access.
Allows KDL stack traces to work correctly again, even if the page daemon has
already unmapped the concerned pages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36230 a95241bf-73f2-0310-859d-f6bbb57e9c96
interrupts (MSI).
* Add the remaining IDT entries and redirection functions in the interrupt code.
* Make the PIC end_of_interrupt() return a result to indicate whether the vector
was handled by this PIC. If it isn't we now issue a apic_end_of_interrupt()
in the assumption of apic local interrupt, MSI or IPI. This also removes
the need for the gUsingIOAPIC global and doing manual apic_end_of_interrupt()
calls in the SMP and timer code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36221 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fix connecting to INADDR_ANY work for tcp (effectively will
connect to INADDR_LOOPBACK)
* add same behaviour to udp
* move some ipv4-specific code out of tcp into ipv4 address module
* bind() and connect() now reject addresses from non-matching
families
* myself: minor cleanup in udp.cpp with respect to 80 chars limit
Closes#5716 - many thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36192 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduce an add-on system to allow libbe to call things living inside liblocale (as liblocale depends on libbe, it can't be linked the usual way)
* This allows localizing the BColorControl class that had some text inside it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36190 a95241bf-73f2-0310-859d-f6bbb57e9c96
other places where previously the same functionality was duplicated. Also
seperated the header which was originally arch_smp.h into apic.h and arch_smp.h
again as some of it is MP and not actually APIC.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36182 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented a tiny bit more sophisticated version of
estimate_max_scheduling_latency() that uses a syscall that lets the scheduler
decide.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36170 a95241bf-73f2-0310-859d-f6bbb57e9c96
locks.
* Added syscalls for a new kind of mutex. A mutex consists only of an int32 and
doesn't require any kernel resources. So it's initialization cannot fail
(it consists only of setting the mutex value to 0). An uncontended lock or
unlock operation can basically consist of an atomic_*() in userland. The
syscalls (when the mutex is contended) are a bit more expensive than semaphore
operations, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36158 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added new thread flag THREAD_FLAGS_ALWAYS_RESTART_SYSCALL. If set, it forces
syscall restart even when a signal handler without SA_RESTART was invoked.
* Fixed sigwait(): If one of requested signals wasn't already pending it would
never wake up. Also, the syscall always needs to be restarted, if interrupted
by another signal.
* Renamed a bunch of the POSIX signal function implementations which did return
an error code directly (instead via errno). Added correct POSIX functions
where needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36054 a95241bf-73f2-0310-859d-f6bbb57e9c96
return it.
* lock_memory_etc(): On error the VMAreaWiredRange object could be leaked.
* [un]lock_memory_etc(): Call VMArea::Unwire() with the cache locked and
explicitly delete the range object after unlocking the cache to avoid
potential deadlocks.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36035 a95241bf-73f2-0310-859d-f6bbb57e9c96
Since the requirement is that the area's top cache is locked, allocating
memory isn't allowed.
* lock_memory_etc(): Create the VMAreaWiredRange object explicitly before
locking the area's top cache.
Fixes#5680 (deadlocks when using the slab as malloc() backend).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36033 a95241bf-73f2-0310-859d-f6bbb57e9c96
* _user_map_file(), _user_unmap_memory(): Verify that the address (if given) is
page aligned.
* Reworked memory locking (wiring):
- VMArea does now have a list of wired memory ranges and supports waiting for
a range to be removed.
- vm_soft_fault():
- Added "wirePage" parameter that, if given, makes the function wire the
page and return it.
- Added "wiredRange" parameter (for calls from lock_memory_etc()) and made
sure we never unmap wired pages. This could e.g. happen when a page from a
lower cache was read-mapped and a write fault occurred. Now in such a
situation the function waits for the page to be unwired and restarts.
- All functions that manipulate areas in a way that could affect wired ranges
do now either require the caller to make sure there are no wired ranges in
the way or do that themselves. Added a few wait_if_*_is_wired() helper
functions for that purpose.
- lock_memory_etc():
- Does now also work correctly when the range spans more than one area.
- Adds VMAreaWiredRanges to the affected VMAreas and retains an address
space reference (so that the address space won't be deleted as long as a
wired range exists).
- Resolved TODO: The area's caches are now locked when
increment_page_wired_count() is called.
- Resolved TODO: The race condition due to missing locking after looking up
the page mapping is now prevented. We hold the cache locks (in case the
page is already mapped) and the new vm_soft_fault() parameter allows us
to get the page wired.
- unlock_memory_etc(): Changes symmetrical to those in lock_memory_etc() and
resolved all TODOs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36030 a95241bf-73f2-0310-859d-f6bbb57e9c96
implementations of the other hooks. This way one can easily detect/handle
otherwise unhandled events.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35964 a95241bf-73f2-0310-859d-f6bbb57e9c96
* BDebugMessageHandler: Interface with hooks for handling of debug messages.
* BDebugContext: Essentially a C++ wrapper for struct debug_context, with
handy methods for controlling a debugged team.
* BTeamDebugger: Proxy for a debugged team. Derived from BDebugContext.
* BDebugLooper: Wraps a main debug message loop. Any number of BTeamDebuggers
can be added and associated with BDebugMessageHandlers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35953 a95241bf-73f2-0310-859d-f6bbb57e9c96
Added fields for temporary storage of the debug registers dr6 and dr7 to the
arch_cpu_info structure. The actual registers are stored at the beginning of
x86_exit_user_debug_at_kernel_entry() and read in
x86_handle_debug_exception().
The problem was that x86_exit_user_debug_at_kernel_entry() itself overwrote
dr7 and, if kernel breakpoints were enabled, dr6 could be overwritten anytime
after. So x86_handle_debug_exception() would find incorrect values in the
registers (definitely in dr7) and thus interpret the detected debug condition
incorrectly. Usually watchpoints were recognized as breakpoints.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35951 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Adapted libtracker.so, DriveSetup and Installer to use the shared version.
* The new version uses the correct units (KiB instead of KB and so on).
* Use the correct units in a few other prominent places, where
string_for_size() could not be used.
Should resolve a major part of #5378.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35935 a95241bf-73f2-0310-859d-f6bbb57e9c96
arch_debug_registers instead.
* Call arch_debug_save_registers() on all CPUs when entering the kernel
debugger.
* Added debug_get_debug_registers() to return a specified CPU's saved
registers.
* x86:
- Replaced the previous arch_debug_save_registers() implementation. Disabled
getting the registers via the gdb interface for the time being.
- Fixed the "sc", "call", and "calling" commands to also work for threads
running on another CPU.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35907 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added BShape::ArcTo() and BShapeIterator::IterateArcTo(), using a previously
unused virtual slot. (Added the symbols for binary compatibility for GCC2
and GCC4.)
* Added operator=(), operator==() and operator!=() to BShape.
* Added BShape::BezierTo() version taking three points, which is sometimes
more convenient.
* Added the four new shape data ops OP_LARGE_ARC_TO_CW, OP_LARGE_ARC_TO_CCW,
OP_SMALL_ARC_TO_CW and OP_SMALL_ARC_TO_CCW. For a single arc, provided the
radius is large enough, there are four possibilities to draw the arc, these
are controlled by the two boolean flags to ArcTo() and mapped to the new
commands accordingly.
* Some style cleanup in Shape.cpp (sorry for mixing it up, but it gets
worse below...)
* Added ShapeTest to src/tests/servers/app.
* Changed the way BShapes are transformed from view to screen space in the
app_server. For arcs, it would be nontrivial to apply a proper transformation,
it's much easier to let AGG take care of it. This affects ServerPicture as
well.
* Wrapped iterating the BShape into try/catch blocks in ShapeIterator. But
I really don't understand the purpose of the class in the first place.
Maybe it can now be dropped, since coordinates don't have to be transformed
in place anymore.
* Refactored copy&paste shape iteration code in Painter. The transformation
to screen space happens there.
* Since RemoteDrawingEngine needed to be adopted anyway, I also updated
it for the new DrawString() with offsets version. But the client still needs
to be adapted.
* Style cleanup in Painter.h
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35905 a95241bf-73f2-0310-859d-f6bbb57e9c96
support file creation.
* Extended open() and open_from() to support O_CREAT to create files.
open_from() has got an optional "permissions" parameter for that purpose.
* Fixed errno. It would crash when being used. Also changed the POSIX functions
to return their error code via errno as expected.
* Added writev().
* FAT file system:
- Added support for reading long file names.
- Added support for creating files (8.3 name only) and writing to them.
- Enabled scanning partitions with it.
* Boot loader menu:
- Enabled the "Reboot" menu item unconditionally.
- Added "Save syslog from previous session" menu item to the debug menu.
Currently saving the syslog to FAT32 volumes is supported.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35882 a95241bf-73f2-0310-859d-f6bbb57e9c96
of locations, one for each glyph.
* Added a test for the new functionality.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35865 a95241bf-73f2-0310-859d-f6bbb57e9c96
received, but if the signal was in the thread's signal block mask, it would
not be handled. Added thread::sig_temp_enabled, an additional mask of not
blocked signals, which is set by sigsuspend() and evaluated and reset by
handle_signals(). Fixes#5567.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35836 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The kernel syslog ring buffer is no longer emptied by the syslog sender
thread. Instead we only drop the oldest data from the buffer when we're
writing to it and there's not enough free space in it.
Advantages: We drop old data rather than the most recent data when the buffer
is full. The "syslog" KDL command has more data available now. So the odds
are that kernel syslog messages not written to disk yet are at least still
in the kernel buffer.
* Changed dprintf_no_syslog() semantics: Now it writes to the syslog, but
doesn't notify the syslog sender thread.
boot loader:
* Added the ring_buffer implementation and a dummy user_memcpy().
* bios_x86: Moved the syslog stuff from serial.{cpp,h} to debug.{cpp.h}.
* Moved the debug options from the "Select safe mode options" menu to a new
"Select debug options" menu.
* Added option "Enable debug syslog" to the new menu (ATM available on x86
only). It allocates a 1 MB in-memory buffer for the syslog for this session
in such a way that it can be accessed by the boot loader after a reset.
* Added item "Display syslog from previous session" to the new menu, doing
what its name suggests.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35816 a95241bf-73f2-0310-859d-f6bbb57e9c96
a given flat buffer.
* Added ring_buffer_peek() for random position reading from the ring buffer
without changing its state.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35813 a95241bf-73f2-0310-859d-f6bbb57e9c96
takes such an id.
* Reused the existing mechanism to to have hardcoded tokens for the system
cursors, i.e. removed cursor_which enumeration from ServerProtocol.h and
used BCursorID where cursor_which was previously used.
* Reworked CursorManager.h and CursorSet.h accordingly and removed some methods
that where intended to replace system cursors with client cursors, since
those would break the reference counting and forget to maintain the cursor
list.
* Replaced the cursors in CursorData.h/cpp with the new ones I just designed.
* Removed HaikuSystemCursor.h and HaikuLogo.h from the source, as those are/were
no longer used.
I hope I will not get too much beating for this one... :-) I know the new
default cursor is slightly larger, but I believe the old one was just too small.
Also I noticed that the cursor may be slightly too dark, at least the old one
seems noticeably brighter when compared side by side (the new one has a slight
gradient). That is something I may correct at least. Otherwise I hope nothing
is broken, I've tested in QEMU and so far everything works as intended.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35782 a95241bf-73f2-0310-859d-f6bbb57e9c96
