* Eventually BoardSetups and target boards will go away.
* Include all known fdt's in the mmc image
* This gets us closer to target board-less arm
* Changing hardware is as simple as plugging a new fdt
into u-boot's startup script.
* Drop my original rpi1 work. We're targetting ARMv7
minimum.
- hub: had an annoying problem preventing to run the script directly.
Now uses a proper "shebang" so it finds ruby.
- mako, setuptools: needed to build Mesa.
- neonlights: my favorite screensaver.
- python 3.6.
- advancemame, for arcade gaming on Haiku.
- sox and gnuplot, for various experiments.
* Hasn't been used for quite some time
* Everything was ported over to a new ATA stack
some time ago.
* No huge regressions were seen from the new ATA
stack.
* built in non-strict mode: dovecot, qupzilla, r
* build failed: intltool (dep of gcab and transmission), python_html2text, vlc,
cython (dep of pyenet)
* not built because of an unsafe source: qutim
* removed compatibility packages for giflib, icu, tiff, libpng, libwebp, libbluray,
libpcre, libvpx, ncurses, readline.
* built in non-strict mode: dovecot, qupzilla, r
* build failed: intltool (dep of gcab and transmission), python_html2text, vlc,
cython (dep of pyenet)
* not built because of an unsafe source: qutim
* removed compatibility packages for giflib, icu, tiff, libpng, libwebp, libbluray,
libpcre, libvpx, ncurses, readline.
* built in non-strict mode: dovecot, qupzilla, r
* build failed: intltool (dep of gcab and transmission), python_html2text, vlc,
cython (dep of pyenet)
* not built because of an unsafe source: qutim
* removed compatibility packages for giflib, icu, tiff, libpng, libwebp, libbluray,
libpcre, libvpx, ncurses, readline.
* built in non-strict mode: dovecot, qupzilla, r
* build failed: intltool (dep of gcab and transmission), python_html2text, vlc,
cython (dep of pyenet)
* not built because of an unsafe source: qutim
* removed compatibility packages for giflib, icu, tiff, libpng, libwebp, libbluray,
libpcre, libvpx, ncurses, readline.
* The app_server isn't designed to support two fallback drivers, so
on systems using UEFI to boot, the framebuffer driver will often
win when other drivers would likely work on those systems.
* Enables us to add an optional EFI filesystem
to the anyboot image.
* All existing anyboot behaviour is preserved.
* We still need to figure out how to build bios
and EFI loaders at the same time on x86.
* The tiny "fake ISO" still needs el-torito
alt-boot for the EFI loader to work when burned
to a CD. This makes the EFI loader work when
written to a hard disk / flash drive.
* Favorites can now be drag & dropped on apps that accept a program,
like LaunchBox - or in fact the ignore list of the Setup window.
* Favorites cannot be moved any longer in a result list, only in the
favorites list.
* When opening an app's containing folder, scroll to and select the
app.
* Fix crash due to a race condition.
* Closes issues: #14, #13, #12
BFont::Blocks is now implemented in ServerFont, via a call through the
app_server. It uses fontconfig to iterate through a charset of a font
and stores the defined blocks in a bitmap.
A new API was added, BFont::IncludesBlock, that will allow for arbitrary
testing of a given Unicode block. Since nothing is cached, searching
through an entire charset for a series of Unicode blocks can be quite
slow. In a given block there may be only 1 or 2 characters actually
defined so every character within a block needs to be checked until one
is found, which in a degenerate case will mean the entire block is
checked.
Signed-off-by: Axel Dörfler <axeld@pinc-software.de>
We bundle bitstream charter as a default font to use when nothing else
is available. We also used to bundle a Courier font, but it does not
work properly.
- Fix the license for Bitstream Charter, to include just the license and
no extra text.
- Add said license to AboutSystem
- Remove the Courier font from the package and from the source tree.
Fixes#11696.
* podofo 0.9.5 isn't compatible with 0.9.4.
* grep compatible with version 2.
* mercurial requires python2 instead of python.
* scribus is rebuilt with newer podofo.
Needed a quick new release:
* Fix disappearing favorites.
* Add context menu with quick access to favorites and QuickLaunch's
"About" to Deskbar replicant.
* Updated localization and documentation.
* Tiny tweaks to the QuickLaunch icon.
- Both Noto and Noto Sans CJK JP are now used as font fallbacks,
allowing to cover a rather large range of characters. This also makes
it possible to mix the two fonts easily.
- Remove VL-Gothic from packages and from AboutSystem
- Add Noto fonts to the dependencies of the Haiku package.
This provides a similar look for all languages as discussed on the
mailing list.
* Added a "Free registration" text file. As the user has to
re-register from time to time for some reason, it may be
easier to find the info in a text file in the app's folder
than looking into the decription of SynC Modular in HaikuDepot.
* FuseSMB provides access to shared files and folders over SMB.
It features automatic discovery of servers and shares and
displays them as a folder hierarchy in a virtual volume on the
desktop
* Supports interactive authentication to access shares which require
login. Just open it, and a dialog pops up. Login data is stored in
BKeyStore.
* Comes with a network preferences add-on to easily enable and
configure it. No barbaric manual typing of mount commands required!
* Makes use of Haiku FUSE extensions to give custom MIME types with
icons for workgroup/share/server folders. Thanks again to humdinger
for designing the workgroup and share icons!
* Although the used libsmbclient only supports SMB protocol
version 1, performance is decent enough. Getting around ~75MiB/s
reading over a GbE link here
This reverts commit 945566ff43.
As discussed on the mailing lists and with Humdinger off-list:
* The general design concensus tends slightly towards DejaVu, as metrics
of DejaVu look much better (DejaVu 12 and Noto 13 are roughly the same size,
but Noto has much wider margins with that)
* While Noto does have a wider set of fonts with support for lots of
different languages, DejaVu actually has built-in support for more
Unicode languages (the default Noto has, as far as I can tell, only
Latin/Greek/Cyrillic [2416 glyphs], while DejaVu also has Armenian, Georgian,
and a few other scripts too [5119 glyphs].)
* The worse rendering of DejaVu appears to have been somewhat rectified by
disabling the average-based subpixel filter in app_server.
* When --host-only is used, HAIKU_*ARCH is undefined.
* Various architecture variables are undefined resulting
in architecture dependant code paths getting called
recursively.
(blah/Jamfile loads blah//Jamfile vs blah/x86/Jamfile)
* Another option is setting HAIKU_*ARCH to the host arch
if undefined, but that might have unintended impacts.
Release v1.0
Fewer bugs, full of drag&drop.
* Add clips to favorites and re-ordering favorites with drag & drop.
* Drag & drop clips and favorites into other apps.
* Power user feature: holding SHIFT while pasting to sprunge.us keeps window
open.
* Made history clips titles editable as well.
* Made the GUI unambiguous. There's only ever one clip shown as active.
* Added menu items that apply to clips/favorites, re-ordered context menus.
* Renamed menu to "Lists" and added item to "Clear favorites".
* Added Romanian translation. Thanks Emrys!
* Updated Russian translation. Thanks Diver!
* Bug fix: Fixed drawing errors of split view handle on resize.
* Bug fix: Fixed issues when starting without settings file.
* Bug fix: Fixed crash when trying to paste to sprunge.us with no selection.
* Bug fix: Put formerly 2nd clip into clipboard when 1st was removed.
* Bug fix: Correctly show GUI controls availablity (e.g. the move buttons).
- This is the latest from the 0.10 branch.
- It includes several improvements and update to codecs, while keeping
the old API.
- The patch to keep things working with gcc2 is getting quite huge.
Tested working with various files, no regressions spotted so far. Please
help complete the test set if you have files that stop working with this
version.
There are some delays in making the actual package repo generated by the
buildbot go live. Until then, I'm going to manually update the existing
repositories with the built packages, so people can start to experiment
with them and report any new issues.
There are more updates coming, but I'm doing them gradually so we can see
which set of packages triggers a regression, should one happen.
This is separate to the VESA driver, as the VESA driver requires
using the VBE BIOS. Under UEFI, we don't have the VBE BIOS, nor
are we able to switch modes after leaving UEFI Boot Services, so
a dumb framebuffer driver seemed like the easier way to approach
the problem.
The framebuffer & vesa drivers now test for the presence of the
VESA_MODES_BOOT_INFO boot item to distinguish between which driver
to use. Also added check for the VESA mode count to determine
whether to add the VESA_MODES_BOOT_INFO item.
UEFI video updated to explicitly zero out the VESA and EDID
boot data.