build.
* Remove the APE reader from the image as it also depends on the non-working
yasm rule.
Please don't just leave the build in such a broken state. It's really annoying
when you're held up by stuff like that when you want to work on something.
Just leave changes like those disabled until you have verified that they work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30111 a95241bf-73f2-0310-859d-f6bbb57e9c96
them to the image. Thanks Urias for testing, submitting patches and... being
patient ;)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30094 a95241bf-73f2-0310-859d-f6bbb57e9c96
"on_exit" with which you can add commands to run when exiting the debugger.
With this you could for example "on_exit sync" and "on_exit shutdown -r" when
your app_server crashed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30016 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Introduce a database of known providers.
- Guess the mx server if the provider is not known.
- Guess default setting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29969 a95241bf-73f2-0310-859d-f6bbb57e9c96
* I noticed a bit too late that we usually have lower caps folder in our
repository. Well, if someone complains enough... :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29942 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Cleaned up CannaLooper.cpp/h to mostly conform to our coding style.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29897 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the TimeZoneView less error prone, and also actually use Haiku code (the
previous check didn't work since it used #if, not #ifdef).
* Also took the liberty to rename our boot loader to haiku_loader, since I had
to update the nasm binary anyway. Updated the assembly sources to nasm 2.0.
* I haven't found where the synth location in the MIDI code is specified,
though.
* Also, NetBootArchive, and FloppyBootImage haven't been updated yet. Will do
so next.
* Some optional packages still put their license to beos/etc/licenses. I didn't
update them yet, as we'll probably do so anyway at some point. Also, I think
we might want to introduce a common/data/licenses instead for those.
* If you encounter any problems, please tell!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29876 a95241bf-73f2-0310-859d-f6bbb57e9c96
files in /boot/home/config/boot. Thanks! Though eventually I'd like to have a
more intuitive method of adding start up applications.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29814 a95241bf-73f2-0310-859d-f6bbb57e9c96
* seems we hit a race during shutdown, thus the BGLView would already be delete
by unload_add_on, crashing the screenblanker (tested with several GL saver)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29793 a95241bf-73f2-0310-859d-f6bbb57e9c96
folders in /boot/beos/, but are real folders, with links to the respective
entries in the /boot/beos/preferences and demos folders. This allows third
party software to place links into the Preferences and Demos entries in the
Deskbar. Fixes ticket #3612.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29745 a95241bf-73f2-0310-859d-f6bbb57e9c96
RecursiveLock in the kernel.
* Several adjustments according to UserlandFS header changes.
* Re-added reiserfs to image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29410 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added debugger commands to resolve usb_ids to pipes.
* Adjusted the physical memory allocator to be usable in a slimmed down mode
when running inside the kernel debugger.
* Implemented USB keyboard support for KDL through a kernel debugger add-on.
* Added kgetc() and made use of it where previously individual methods were used
to ensure that reading characters always goes through the kernel debugger
add-ons and the other methods.
This has some preconditions to meet though:
1) The keyboard must be in the boot protocol (currently the case but needs to
be revisited once we have a full usb_hid).
2) The keyboard must be attached to a UHCI root port (i.e. not use EHCI or OHCI,
also not through hubs unless those are USB 1.1).
3) the usb_hid driver has to be opened for this to work. This means that for the
time between initializing USB and when usb_hid is opened by the input_server
there is no keyboard support.
Also note that this has no way of detecting hot-plug, meaning that you can't
re-attach your USB keyboard from the hub to the root port once in KDL.
On the bright side of things, since this is a non-destructive mechanism it is
possible to enter and leave KDL without loosing the USB state.
Tested OK in QEMU, not tested on real hardware yet, will see in a few minutes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29291 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add attribute_overlay and write_overlay to the image/floppy instead.
* Mount a iso9660 boot volume with both write and attribute overlay for now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29261 a95241bf-73f2-0310-859d-f6bbb57e9c96
* When booting from an iso, mount the boot volume with the overlay layer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29202 a95241bf-73f2-0310-859d-f6bbb57e9c96
By default it now presents a relatively concise list of USB
devices found on the bus, with an optional -v flag to dump
exhaustive detail. It still also takes an optional device
parameter in case you only want information for a particular
device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29185 a95241bf-73f2-0310-859d-f6bbb57e9c96
old invalid user listeners yet, though (ie. if a team dies).
* Implemented userland network monitor functions.
* Added a few notifications to the network stack, even though this part isn't
complete yet (especially notify_interface_changed()).
* Added optional debug output to the notifications module.
* Added the module to the image, it basically works now (tested).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28825 a95241bf-73f2-0310-859d-f6bbb57e9c96
UserBuildConfigRulePreImage, and UserBuildConfigRulePostImage which will be
invoked at different points in the build system execution. They can be
overridden in UserBuildConfig, thus allowing for executing user code at
those points.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28765 a95241bf-73f2-0310-859d-f6bbb57e9c96
code duplication and will make maintaining it much easier.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28647 a95241bf-73f2-0310-859d-f6bbb57e9c96
* adjusted libtextencoding's Jamfile
* added libiconv.so to image
* added iconv headers to optional package Development (under 3rdparty)
* removed old private version of libiconv from textencoding
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28631 a95241bf-73f2-0310-859d-f6bbb57e9c96
* While I was at it, I also removed the extra screen savers until Ryan fixed
the issue (bug #2339).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28547 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added GNU M4 1.4.12 package to the Development optional package.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28486 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented a small app "checkfs" to check partitions and put it on the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28435 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented BGradient, BGradientLinear, BGradientRadial,
BGradientDiamond, BGradientConic and BGradientRadialFocus
new Interface Kit classes.
* Implemented all the (AGG-based) backend necessary in
the app_server to render gradients (Painter, DrawingEngine)
* app_server/View can convert a BGradient layout to screen
coordinates.
* Added BGradient methods of the Fill* methods in BView.
* Implemented a test app and added it to the image as a
demo.
* Adopted Icon-O-Matic and libs/icon in order to avoid
clashing with the new BGradient class. Re-use some
parts where possible.
Awesome work, Artur! Thanks a lot. Now a more modern
looking GUI has just become much easier to implement! :-)
TODO:
* Remove the need to have gradient type twice in the
app_server protocol.
* Refactor some parts of the patch to remove duplicated
code (Painter, DrawingEngine).
* Adopt the BPicture protocol to know about BGradients.
* Review some parts of the BArchivable implementation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28109 a95241bf-73f2-0310-859d-f6bbb57e9c96
please let us know. Especially shutting down your system can potentially
change its behaviour (maybe even for the better, but maybe not :-)).
* Added the GCC2 KDL demangle module to the image by default.
* White space cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28020 a95241bf-73f2-0310-859d-f6bbb57e9c96
build. This is mostly complete, excepting BBufferConsumer's virtuals are not
yet implemented, and needs more testing to ensure that the encoded stream is
correctly read from the camera, though based off preliminary tests by Francois,
detection/publishing at least seems to work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27965 a95241bf-73f2-0310-859d-f6bbb57e9c96
various system information.
* Implemented retrieving some VM stats via this call.
* The VM now maintains a page fault counter, and sets system_info::page_faults
accordingly.
* Added a (pretty simple) "vmstat" command line app.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27597 a95241bf-73f2-0310-859d-f6bbb57e9c96
architecture: for now, we do this on the lowest layer only, therefore all
requests are handled synchronously (ie. in the scheduler's thread).
* Instead of using the block_io module, scsi_disk (and scsi_cd) are now
exporting a device on their own, and use an I/O scheduler with an appropriate
DMA resource.
* There are still lots of TODOs, and it can easily panic - don't update if
you intend to demo Haiku.
* scsi_periph now only has an io() function that get an io_operation, instead
of the previous read/write functions, moved preferred CCB size from those
functions into the device registration.
* Changed all scsi_periph files to C++.
* scsi_cd ported, too, but untested.
* Removed block_io from image - it will be removed completely soon.
* Temporarily commented an ASSERT() in the ATA bus manager (in case you use
it); it's sometimes triggered by the code now, and I haven't yet looked into
the issue -- doesn't seem to harm, at least.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26828 a95241bf-73f2-0310-859d-f6bbb57e9c96
in Tracker add-ons folder with short cut (like done for Backgrounds). Untested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26739 a95241bf-73f2-0310-859d-f6bbb57e9c96
screen mode from the command line.
* With its "--fall-back" parameter, it's also thought to be called from BWindow
when a specific shortcut has been pressed (similar to screenshots) - this
part is not implemented yet. Anyone against <Command><Control>-<Escape>?
* Added it to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26150 a95241bf-73f2-0310-859d-f6bbb57e9c96
less.
* Added /etc/vim/vimrc. Besides fixing key mappings it also disables
compatibility mode and adjusts some settings to make using vi a more
pleasant experience.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26028 a95241bf-73f2-0310-859d-f6bbb57e9c96
Temporarily removed the VESA driver, as long as it only builds on x86.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25913 a95241bf-73f2-0310-859d-f6bbb57e9c96
controller. The device doesn't use the PCI_ide subclass (but
PCI_mass_storage_other) and requires not using compatibility mode. Otherwise
it's pretty much the generic_ide_pci driver.
* Directly adding the driver to the image.
This driver could either be merged into the generic ide driver so it supports
not quite standard devices, or this could be made into a driver that collects
all those non standard devices. Either way, this works for now and lets my
machine boot off the IDE drive :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25868 a95241bf-73f2-0310-859d-f6bbb57e9c96
should make default images bootable from USB automatically. DDing one to a
USB stick should work out of the box then (but this wipes the stick of course).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25836 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Minor cleanup of ide_isa, and generic_ide_pci (removed wrapper.h).
* Added ide_isa back to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25755 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added legacy_sata and scsi_cd back to the image.
* Minor cleanup in scsi_disk.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25739 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed scsi_dsk to scsi_disk.
* Joined all scsi_disk sources together to a single scsi_disk.cpp file.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25737 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed std_ops(), as it wasn't used for anything, and is optional in Haiku.
* ide_isa, and legacy_sata are still waiting for the same set of changes :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25678 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved devfs from fs/ to device_manager/, and separated the legacy driver
support from it.
* Removed fast_log module.
* There are a couple of (temporary) regressions, though:
- legacy SATA and ISA IDE support is disabled, the drivers haven't been
ported yet.
- The not yet used ATA bus manager hasn't been ported yet, either.
- AHCI changes have not been tested.
- the listdev command has been removed from the build (as it currently
doesn't work anymore).
- device manager generated IDs currently are not freed anymore when a device
node is removed.
- generic drivers can't yet use the new driver architecture.
- simple busses that do not support device types won't work yet.
- legacy driver publishing/unpublishing (ie. what USB needs) has not been
tested, and may be broken.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25662 a95241bf-73f2-0310-859d-f6bbb57e9c96
Gerald Zajac. Thanks a lot!
* Also put it on the image by default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25583 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointer also contains the toggle carry and the halt bit (which was obviously
always set as the endpoint had an error) the address comparison failed and
the head was dead in the water with all further transfers timing out until
a subsequet cancel cleaned the mess up again.
* Add the OHCI host controller driver to the image as it should now be fully
functional except for isochronous transfers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25565 a95241bf-73f2-0310-859d-f6bbb57e9c96
4). One has to have a (fully configured) "generated" directory for the
alternative gcc and specify it using the new option
"--alternative-gcc-output-dir" when configuring the main build.
Additionally the build variable HAIKU_ADD_ALTERNATIVE_GCC_LIBS has to be
set to "1".
If that has been done, when building the image a sub-jam is invoked that
generates the alternative libs and zips them. The main-jam unzips them
into the correct directory in the image. Note that the JAM build
variable has to be set when using a jam executable not invoked by "jam".
Tested with gcc 2 NetPositive, Pe, and FireFox under gcc 4 Haiku, and
with a few of the standard gcc 4 Haiku apps under gcc 2 Haiku. Seems to
work fine so far.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25536 a95241bf-73f2-0310-859d-f6bbb57e9c96
Added a new command line utility "mkfs" which can initialize a given volume
with a file system by it's short name via the new Disk Device API.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25491 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The built-in services are no longer added as resource to libnetwork,
but as attribute. This removes the libbe dependency.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25485 a95241bf-73f2-0310-859d-f6bbb57e9c96
AddLicenseToHaikuImage that can be used in optional package definitions
to add a copyright entry in AboutSystem and add a license file to
/etc/licenses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25313 a95241bf-73f2-0310-859d-f6bbb57e9c96
a bit:
* Added directory /etc/post_install, which can contain scripts that will
be executed on the first boot.
* Moved the mimeset invocations to such a script. Use the "-apps"
option instead of "-all". Since create_app_meta_mime() (and thus
mimeset) work recursively now, running the commands does actually have
an effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25309 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Whenever unzipping a zip archive to the image, we do first check, if
it contains an .OptionalPackageDescription file. If so, its contents
is appended to AboutSystem's "COPYRIGHTS" attribute, which will cause
the respective info to be shown in the about view.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25050 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also removed the header files that belong to those files.
* Only kept the userland_ipc.h header for now, to remember us about the
former userland server driver (that I also removed - it can always be
resurrected from SVN if needed).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25045 a95241bf-73f2-0310-859d-f6bbb57e9c96
new filesystem interface.
* Renamed sISO* to gISO* though as they are in fact not static.
Briefly tested and works as expected. Thanks for your work Dustin!
Closes enhancement #2089.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24994 a95241bf-73f2-0310-859d-f6bbb57e9c96
was, thanks to the detailed instructions from Ingo, quite doable.
* Ported the (deprecated and now publically removed) notify_listener() calls
to the respective new notify_* calls.
* Fixed debug build.
* Added the FAT filesystem back to the image.
I only tested the filesystem briefly and everything seemed to work as expected
(mounted the FAT part of my bootable Haiku memory stick, opened a few files
and copied something to it). At least it should not be any more broken than
before the interface changes ;-).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24987 a95241bf-73f2-0310-859d-f6bbb57e9c96
suites and the like, and moved the image jam code for PosixTestSuite
and libMicro there.
* Some cleanup (line length, use grist).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24970 a95241bf-73f2-0310-859d-f6bbb57e9c96
- The net_stack driver is no longer used. Instead we have a kernel
module which is directly used by syscall implementations in the
kernel. I.e. we no longer tunnel those functions through ioctls, but
have normal syscalls.
- Removed the superfluous net starter module.
- Implemented the FDTYPE_SOCKET type file_descriptors, that is sockets
are no longer vnode based.
- Adjusted libnetwork (the socket function implementations)
accordingly.
- Adjusted netstat accordingly.
* Socket module:
- Implemented socketpair().
- Added "kernel" parameter to the control hook. Quite a few more hooks
would actually need the parameter, but I didn't change those yet,
since that would probably also require changes to the protocol
module interface.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24908 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Moved most file_system_module_info hooks into separate structures.
Those that operate on mounted volumes to fs_volume_ops, those
operating on a vnode to fs_vnode_ops.
- Got rid of the fs_volume, fs_cookie, fs_vnode typedefs. We use void*
again.
- Instead of a void* volume and node cookie hooks are passed a
fs_volume and fs_vnode structure pointer, which contain the cookie
and an ops pointer (fs_volume a few more things).
- The VFS {new,publish,get,...}_vnode() functions take a fs_volume*
instead of the volume ID. So does vfs_get_fs_node_from_path().
- Added type and flags arguments to publish_vnode() and the
get_vnode() hook and removed the type argument from lookup() hook.
Added vnode::type using formerly unused bits to store the node type.
Simplified a few things in the VFS due to the now always available
node type.
- Added fs_volume_ops::{create,delete}_sub_vnode() and
fs_vnode_ops::get_super_vnode() hooks. They are used to support file
system layers, e.g. allowing to extend an FS not supporting BeOS
attribute with attribute support. Needs some more work in the VFS.
- Added fs_vnode_ops::create_special_node() hook for creating special
nodes (e.g. FIFOs).
* Adjusted the built-in file systems and BFS according to the interface
changes. Removed all other FSs from the image for the time being.
We'll see whether further API changes are necessary before porting
them.
* Adjusted the bfs_shell accordingly.
* Implemented create_special_node() in rootfs to support special nodes.
* Added support for FIFOs:
- Added syscall _kern_create_fifo() (used by mkfifo()), which creates
a special node (type S_IFIFO) in the respective file system.
- When a special node is published the VFS creates a respective sub
node. Currently only FIFOs are supported.
- Added a little support for FIFO subnodes by using functionality from
the pipefs.
- Added mkfifo to the image. It can create FIFOs in the rootfs, but
the FIFOs aren't really usable ATM, since they still work like
pipes, i.e. readers and writers need to have them open at the same
time.
* Some smaller changes in the VFS:
- Made the *_CALL macros nicer to use (vargs).
- Refactored FS entry lookup into new function lookup_dir_entry().
- create_vnode() no longer just calls the FS create() hook. First it
looks up the entry and uses open_vnode(), if it already exists. This
is necessary for two reasons: 1) The FS might not support create()
while still allowing to open() entries. 2) When the FS has other
layers on to of it (or the respective node) it might not be
responsible for opening the node.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24816 a95241bf-73f2-0310-859d-f6bbb57e9c96
by default (new option "-H" will create the header only). Option "-c"
will clear the image.
* Adjusted build_haiku_image accordingly. vmdkimage is way faster and
more portable than the former vmdkheader+dd combo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24784 a95241bf-73f2-0310-859d-f6bbb57e9c96
Especially people building various kinds of images with different
settings may want to have a look at the respective section in the
UserBuildConfig.ReadMe.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24757 a95241bf-73f2-0310-859d-f6bbb57e9c96
functions by ones reading /etc/{group,passwd}.
* Added quasi-standard getpwent_r() and getgrent_r().
* Added _SC_GETGR_R_SIZE_MAX and _SC_GETPW_R_SIZE_MAX sysconf()
constants.
* Moved initgroups() and getgrouplist() definition to grp.cpp. They use
the same backend as the <grp.h> functions.
* Set the permissions of files created by the build system to what they
should be on the image (executables: 755, others: 644). Otherwise only
root could do anything under Haiku.
* Added build system variables HAIKU_ROOT_USER_NAME and
HAIKU_ROOT_USER_REAL_NAME to customize name and real name of Haiku's
root user.
* Added build system rules AddUserToHaikuImage and AddGroupToHaikuImage
for adding additional users and groups (by default only root user and
group and a "users" group are created).
* Adjusted BIND port and coreutils config.h files according to what
features have become available.
* Fixed HAIKU_DOCUMENTATION_OBJECT_DIR definition. Untested, but it used
a wrong variable name before.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24750 a95241bf-73f2-0310-859d-f6bbb57e9c96
TODO:
- Implement/integrate low level stuff (see BootDrive.h)
- reading the partition table
- reading/writing the MBR
- writing the boot menu
- Open file dialog for selection of backup MBR file
- Write error message in case of I/O errors
- Test
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24689 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Added a "root" vnode to the io_context. It is used for resolving
paths and converting nodes to paths instead of sRoot. Some more
passing around of io_context structures was necessary.
- Introduced a new lock sIOContextRootLock to protect
io_context::root. The current uses of io_context::io_mutex
(put_vnode(), remove_vnode() while holding it) looked too suspicious
to use that mutex in vnode_path_to_vnode().
- Added _kern_change_root() syscall and chroot() libroot function.
- Added chroot coreutils program to the image. Funnily it seems to be
much easier to set up a little jail than under Linux (just copy
bash and libroot.so into respective subdirs; mount another pipefs
if you want pipe support).
With Haiku allowing direct access to directories via inode IDs
jailing is obviously not very secure at the moment.
- Added /var/empty to the image. It will be the chroot target for ssh.
* Changed vfs.cpp:get_cwd() so that the io_context::io_mutex is no
longer held when calling dir_vnode_to_path().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24673 a95241bf-73f2-0310-859d-f6bbb57e9c96
and sorted definitions alphabetically.
* Updated Pe package to 2.4.1.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24659 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Simplified the addition of the libpng and zlib headers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24656 a95241bf-73f2-0310-859d-f6bbb57e9c96
specifying the name of the header directory on the image.
* Renamed the "gnu" header directory on the image to "3rdparty" and
created a "gnu" symlink for compatiblity.
* Added zlib and libpng headers to the "3rdparty" header dir.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24600 a95241bf-73f2-0310-859d-f6bbb57e9c96
directory to the image. It supports exclude patterns.
* Changed Add{Source,Header}DirectoryToHaikuImage to use the
CopyDirectoryToHaikuImage rule. The special handling in the
build_haiku_image script is gone now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24586 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Extended the Development optional package. It will now also install
gcc/binutils as well as autoconf, automake, libtool, texinfo (and
their dependency perl).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24567 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Install libncurses.a.
* Copy the cpp headers from our repository; don't use the compiler
headers. This needs some more shuffling around.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24543 a95241bf-73f2-0310-859d-f6bbb57e9c96
so one can set it to the static libroot, if desired.
* Generic attribute emulation:
- Added build tool rm_attrs, a simple "rm" replacement, which also
removes the attributes directory for a given file.
- Added build/scripts/rm_attrs shell script, which wraps the
invocation of the rm_attrs tool. If it doesn't exist yet, the
ordinary rm is used.
- The RM jam variable refers to the rm_attrs script now, i.e. whenever
something is removed by the build system, the attributes are removed
too (if the build tool has already been built, that is).
- Removed the shell function attrrmrf() in build_haiku_image. We use
the rm_attrs tool instead, if necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24528 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also install _G_config.h.
* /boot/develop/headers/cpp is a symlink to g++'s headers, now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24523 a95241bf-73f2-0310-859d-f6bbb57e9c96
* This allows you to use a GCC compiler completely with native headers,
all you have to do (after having unpacked and moved GCC to the correct
location), is to replace its "lib/gcc-lib/i586-pc-beos/2.95.3-beos-060710/include"
directory with this one. There is no need for R5 headers anymore,
then.
* Removed extraneous whitespace.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24469 a95241bf-73f2-0310-859d-f6bbb57e9c96
