* HaikuRepository rule: Create the repository config.
* HaikuImage: Add the repository config for the Haiku image. The
repository cache is not added, though (it would only be available, if
the repository had been built before).
Implements #10287. The Haiku repository is now available in Haiku by
default.
* PreprocessPackageInfo rule: Pull out new rule
PreprocessPackageOrRepositoryInfo which does the sed substituation and
optionally the filtering through the C preprocessor.
* HaikuRepository rule: Generate the repository info file (from the
given template). No longer do that in the build_haiku_repository
script.
* Resolves problem with secondary arch builds
not picking up secondary os kit headers
* Still need to build x86 gcc packages
* No binary changes, shouldn't need a bootstrap
Older versions will not work anymore because of the API changes in
network kit (removal of nonstandard B_PROT_* status codes). x86 and
x86_64 packages have to be updated again.
* Also update dependencies cmake and libxml2
* Bonus package: Milkytracker
This is for gcc2hybrids only. gcc4 and x86_64 users are welcome to
contribute an haikuwebkit package for their architectures using the
haikuporter recipe.
* Fix issue where mesa_devel attempted to lay
a symlink over a directory causing instability
installing mesa_devel
* Add mesa_swpipe to repos (LLVM enabled Gallium softpipe)
Somehow gcc doesn't detect the linker is GNU ld when run in Haikuporter.
We now force this in the recipe. This allows gcc to invoke the linker
with response files, avoiding "command line too long" errors, for
example when building WebKit.
* Add rule HaikuRepository to build a repository from a repository info
file and a list of package files. It calls a build_haiku_repository
script which does all the work.
* Add target <repository>haiku for building the Haiku package
repository.
It should be built via "jam -q @alpha-raw build <repository>haiku";
the build profile is only needed to activate all build features.
* perl and python now support vendor-folders for modules and use correct
(i.e. writable) site-folders
* git, mercurial and scons have been adjusted to put their perl/python
modules into respective vendor-modules folders
* only the source package are actually relevant, as the source paths
within older versions of those source packages no longer match the
expectations of the build system
Almost complete. bepdf is still missing, since it doesn't build with gcc
4 and a few source packages are missing as well (binutils and gcc
because haikuporter doesn't build them correctly ATM, mesa due to an
oversight).
The Haiku bootstrap image is now built with (hopefully) all required
primary and secondary architecture packages. The runtime loader is still
resisting our wish to run secondary architecture programs, though.
* Add rule FSplitPackageName. It splits a package name into port name
and package suffix.
* FSetConditionsHold: Rename to FConditionsHold and replace the set
parameter by a predicate rule parameter, thus adding more flexibility.
* FIsBuildFeatureEnabled: Use the faster check.
* Add rule FQualifiedBuildFeatureName. Given a build feature name, it
prepends the current packaging architecture to yield a qualified
feature name. Is used by the other build feature rules so that the
same build feature can be configured differently for each arch.
* ExtractBuildFeatureArchives: The supplied list is now filtered via
FFilterByBuildFeatures, allowing for build feature conditions in the
list.
* Add rule InitArchitectureBuildFeatures. It is called early for each
configured architecture, setting up some basic build features for it.
"primary" is set for the primary architecture and a "secondary_<arch>"
is set for each secondary architecture.
* BuildFeatures: Add secondary architecture support: Use the correct
paths for libraries and headers (subdir for secondary architecture)
and configure the icu and zlib sources only for the primary
architecture.
* BootstrapPackageRepository: The package lists are now filtered via
FFilterByBuildFeatures, allowing for build feature conditions in the
lists.
* IsPackageAvailable, FetchPackage: Add secondary architecture support.
* HaikuPortsCross/x86_gcc2: Add icu and zlib x86 secondary packages.
The second stage Haiku cross devel package for the secondary
architecture can now be built.
* Add configure option --bootstrap which allows specifying the
haikuporter and HaikuPorts repository paths.
* Add rules for supporting a second repository type. The
PackageRepository rule is now private and RemotePackageRepository is
used for remote repositories. The new BootstrapPackageRepository rule
is for defining a bootstrap repository (there will probably be only
the HaikuPorts cross repository) whose packages can be built as needed
via haikuporter.
* Rename DownloadPackage to FetchPackage.
* Define repository HaikuPortsCross.
* HaikuCrossDevel package(s): There are now two sets of packages: A
"stage1" set with the same content as before and a final set
additionally containing the libraries libbe, libnetwork, libpackage.
Those are needed for building the libsolv bootstrap package while for
building them we need other bootstrap packages (ICU, libz).
This is basically all that's required to build a bootstrap Haiku
completely from sources, with a few caveats:
* There's no ICU bootstrap recipe yet (so one has to cheat and use the
prebuilt package ATM).
* Probably doesn't work on Haiku yet (tested on Linux only).
* A 32 bit environment must be used (otherwise building the gcc 2
bootstrap package fails).
* Building with multiple jobs doesn't work yet, since haikuporter uses
common directories for building different packages and there's no
explicit serialization yet.
* Haven't tested the resulting image save for booting it. So it probably
needs a bit more work before it can actually build the final
HaikuPorts packages.
* Under the base URL there are supposed to be the repository files and a
subdirectory "packages".
* Fix the repository URL related confusion introduced earlier. The URL
in
the repository info (and thus in the repository file) is supposed to
be the base URL for the repository. It is not a (potentially)
different base URL for the package files. Package and repository
files were supposed to live in the same directory. Now, by requiring
the package files to live in a subdirectory -- which can also be a
symlink -- we gain some flexibility.
The URL in the repository config is usually the same as the in the
repository info, unless it refers to a mirror site. This allows for
mirrors to copy the original repository verbatim.
* Remove the PackageURL rule and introduce a DownloadPackage rule
instead. The URL for a package file cannot be computed in the jam
parsing phase anymore, as it contains the hash value of the package
list.
* BRepositoryConfig: Add PackagesURL() for convenience.
The package kit actually requires the files "repo", "repo.info",
"repo.sha256" to be located under the repository base URL, so the
approach to name the repository file "repo-<hash>" doesn't work.
Now there's a directory "<hash>" which contains the files.
This commit moves the computation of the hash and downloading the
repository file from the build_haiku_image script to the jam build
system. The repo.info is also downloaded and a repository config file
is generated.
* Build libsolv and the dependency solver part of the package kit for
the build platform.
* Add build tool get_package_dependencies. Given a list of package files
and a list of repository files it determines the additional packages
that need to be retrieved from the repositories and prints their URLs.
* Add rules to work with external repositories in the build system
(build/jam/RepositoryRules):
- PackageRepository declares an external repository with all its
packages. The URL of the repository file isn't specified. It is
computed from a given base URL and the SHA256 hash of the list of
package files.
- GeneratedRepositoryPackageList generates a file containing the file
names of all packages in a repository.
- IsPackageAvailable returns whether a package is available in any
repository.
- PackageURL returns the URL for a package.
* Declare the HaikuPorts repository for x86_gcc2
(build/jam/repositories/HaikuPorts/x86_gcc2).
* Add rule AddHaikuImagePackages to add a package to the image and rule
IsHaikuImagePackageAdded to determine whether a package has been
added.
* OptionalPackages: Remove all entries that just downloaded and
installed an external package. AddHaikuImagePackages can be used
instead and is used in the remaining entries. Also move the remaining
optional package dependency declarations from
OptionalPackageDependencies here.
* ExtractBuildFeatureArchives: Instead of the URL parameter a package
name must be specified now. This allows to simplify BuildFeatures
significantly, since there's no dealing with URLs anymore. "if" out
the entries that aren't supported yet.
* build_haiku_image: For the packages installed in system and common
resolve their dependencies and download and install them as well.
