libmedia.so was used by at least 2 apps included in the minimum image,
Activity Monitor and Deskcalc which subsequently failed to load on minimum.
Deskcalc wasn't actually using libmedia.so so I managed to get it to link and
run on minimum, however, Activity Monitor is using libmedia.so so needed it
to be present.
To fix this I added libmedia.so to the minimum image, I hope this does not blow
its size budget. (adds 1.0MB)
* Hasn't been used for quite some time
* Everything was ported over to a new ATA stack
some time ago.
* No huge regressions were seen from the new ATA
stack.
* The app_server isn't designed to support two fallback drivers, so
on systems using UEFI to boot, the framebuffer driver will often
win when other drivers would likely work on those systems.
This is separate to the VESA driver, as the VESA driver requires
using the VBE BIOS. Under UEFI, we don't have the VBE BIOS, nor
are we able to switch modes after leaving UEFI Boot Services, so
a dumb framebuffer driver seemed like the easier way to approach
the problem.
The framebuffer & vesa drivers now test for the presence of the
VESA_MODES_BOOT_INFO boot item to distinguish between which driver
to use. Also added check for the VESA mode count to determine
whether to add the VESA_MODES_BOOT_INFO item.
UEFI video updated to explicitly zero out the VESA and EDID
boot data.
- B_TRIM_DEVICE on a ram disk frees all requested pages. Reading from a
trimmed page returns all 0s. This can be used with fstrim to release
memory for the parts not used by the filesystem, without unregistering
then registering the device.
- Add icon and ioctl to get it.
- Add it to the image, because it works reasonably well and there is no
reason not to include it.
- Add subfolder src/kits/debugger which contains the debugger's core
functionality and lower layers. Correspondingly add headers/private/debugger
for shared headers to be used by clients such as the Debugger application
and eventual remote_debug_server. Adjust various files to account for
differences as a result of the split and moves.
- Add libdebugger.so to minimal Jamfile.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
This is a squash of the 42 commits by @mshlyn, as I couldn't find a
way to break them into logical chunks. I did not include these in the build,
as it appears that they only partially work anyway, and much more cleanup is
still needed. However, this is a huge improvement on what was in the tree
before, which looked horrendous and didn't even compile (as it was designed
for the old stack).
Mostly fixes#812.
* The same mechanism (and the same PostInstallScript) is used for this.
* If a file first_login exists in ~/config/settings/boot, the first-login
scripts are launched, and the file removed.
* This fixes adding the deskbar tray icons even when there is no Deskbar
running yet (for example on first boot when the FirstBootPrompt
starts), or, IOW bug #12275.
This can be used by scripts to do verious performance measurements.
Specifically it can be used to measure the boot time since it represents
the uptime.
* This directory is for services that are launched per user (in a user
context), but installed globally.
* This is now used for the default "user" configuration; before this was
put into ~/config/non-packaged/data/launch, which didn't really fit,
and has the huge disadvantage that it cannot be updated.
* Fixes part of #12227.
* Instead of launching Tracker/Deskbar directly, we now launch the
Login application.
* This will now start a new session for the selected user (the password
is currently ignored).
* When a user session is started, the launch_daemon forks, and the
child then restarts the LaunchDaemon application in user mode.
* It then registers itself with its parent, in order to resolve user
dependent services.
* Added a user launch file that will cause Tracker, and Deskbar to
start in the new session.
* Added initializing /tmp & /var/shared_memory to the launch_daemon.
* Moved clockconfig.cpp code into the launch_daemon.
* This follows systemd design; since those jobs are fixed, it doesn't
matter where you maintain them.
* The init jobs are BJobs, but the JobQueue is only used for that
one use for now. At a later time, I intend to put the job launching
in there, as well. BJob allows to represent the dependencies already.
* This is actually working already, although we cannot reproduce all
the features of the former Bootscript yet. This is without any
dependency support in launch_daemon.
* All shell activity like cleaning out /tmp, setting up the environment,
setting the time, etc. is not yet working.
These files are required for netresolv functionality, and there is no
real use in modifying them as settings files. Restore the previous
behavior, the files are stored in data and part of the Haiku package.
This means there is no need for a fresh install from image to get the
files anymore.
Fixes#12156.
libbind development was transferred to the NetBSD project at
http://wiki.netbsd.org/individual-software-releases/netresolv/
There isn't an official release yet, but they provide a set of patches
against the latest libbind release.
* Remove all files we don't use
* Merge the changes to the remaining files
* Add some new files we need
* Move getifaddrs implementation to libnetwork (instead of libbnetapi)
so it can be used by netresolv.
Fixes#8293 : netresolv uses getifaddrs to determine if there is a local
IPv6 address. If there is not, it will not return AAAA records.
* Put getlimits and kill back in the image, the former is not provided
by coreutils, Haiku provides an updated version of the latter.
* frcode is not provided by either coreutils or Haiku and has been
removed, do we need it?
* this is a mandatory package.
* removed related commands from the minimum image definition.
* removed related commands from the Haiku package PROVIDES.
* the su command is deprecated in 8.22. Use the 8.4 in-tree version.
* the packages contain and provide the df command, to be removed.
* Instead of faking libstdc++.so from libstdc++.a, use libstdc++.so
from the gcc_syslibs build feature for everything except x86_gcc2.
* Use libgcc_s.so from the gcc_syslibs build feature for everything but
x86_gcc2 (which still carries libgcc as part of libroot.so).
* Drop filtering of libgcc objects for libroot, as that is no longer
necessary since we're only using libgcc-as-single-object for libroot
with x86_gcc2, where the filtered object file doesn't exist. Should
the objects that used to be filtered cause any problems as part of
libgcc_s.so, we can always filter them as part of the gcc build.
* Use libsupc++.so from the gcc_syslibs build feature for everything but
x86_gcc2.
* Adjust all Jamfiles accordingly.
* Deactivate building of faked libstdc++.so for non-x86-gcc2. For
x86_gcc2, we still build libstdc++.so from the sources in the Haiku
source tree as part of the Haiku build .
* Put gcc_syslibs package onto the image, when needed.
