See http://www.acpica.org/download/changes.txt done after 2010-10-13 for info on ACPI changes.
* Adapted the embedded controller to match current FreeBSD one.
There will probably be some issues with these changes initially.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42637 a95241bf-73f2-0310-859d-f6bbb57e9c96
from settings retrieved through get_{current|possible}_resources().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41382 a95241bf-73f2-0310-859d-f6bbb57e9c96
turns out to be flaky, is a little bit of a hack anyway and performs unnecessary
operations. The functionality is now handled kernel side which optimizes those
problems away.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41372 a95241bf-73f2-0310-859d-f6bbb57e9c96
the base bus number and segment which is what we're using them for. It should
work generically, however I only tested it to look up PCI bridge devices.
The logic is a subset of what is done in AcpiEvPciConfigRegionSetup when setting
up the operation region for a PCI device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41365 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Some automatic whitespace cleanup.
This makes the interrupt model change via kernel actually work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41340 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ACPI module now has a get_possible_resources function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41320 a95241bf-73f2-0310-859d-f6bbb57e9c96
Embedded Controller still needs some looking into, and I had to remove the WIP code for dumping MADT.
Both are on my TODO.
Also removed a lot of unneeded parts of ACPICA from trunk and did some cleanup in Jamfile.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39565 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed irq_routing struct from ACPI.h to where it is used. Might be able to use acrestype.h instead of duplication.
* Disable old embedded controller and remove it from image.
* Move embedded controller code to busmanager module.
* Remove (some) code duplication
Should work as before, but is now initialized right after the bus manager. Can probably remove further code duplication.
I hope I've done it correctly, feedback is most welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36420 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Exposed ACPI API needed by Embedded Controller
This will be removed again if moved inside the bus manager.
It also duplicates ACPI's own headers so it might go out of sync atm.
* Added mutex to controller and fixed the mixup between acpi_status needed in int handlers and Haiku status.
* Major code cleanup
Not for headers as they are mostly redundant if we move the controller.
Variable names still needs some cleanup
This makes the ACPI errors from the controller understandable. I get AE_NO_HARDWARE_RESPONSE now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36318 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Now also use the acpi handle to call a function and not use the path to get a handle and then call the function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31101 a95241bf-73f2-0310-859d-f6bbb57e9c96
wake vector (not tested at all).
* Removed disabling interrupts when entering the sleep state - looks like
ACPI still needs memory then.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27403 a95241bf-73f2-0310-859d-f6bbb57e9c96
commented the insertion of the attribute name in patterns in the case of a string attribute
notify_probe_by_file chooses a module based on a bus specific suffix
dm_register_child_device has a parameter to optionally check the support for the node
added scanning of bus devices after the boot filesystem is mounted
fixed dm_rescan, locking was misbehaving
fixed SYSTEM_DRIVER_REGISTRATION definition
added B_DRIVER_MAPPING attributes for PCI and ACPI devices:
%vendor%_%device% for PCI, hid_%hid% and type_%type% for ACPI
moved acpi_device_module_info definition to public ACPI.h
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19394 a95241bf-73f2-0310-859d-f6bbb57e9c96
added a new style module to publish acpi devices ("listdev -d" to list them)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19322 a95241bf-73f2-0310-859d-f6bbb57e9c96
* thermal driver uses get_object to obtain the passive device package.
Need changes to acpi_object_type to handle references... that'll have to come in the near future.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16637 a95241bf-73f2-0310-859d-f6bbb57e9c96
