implement on x86 with APERFMPERF.
Change-Id: Ia484854c76dee76c5447983de15800a25d791d39
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3213
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
to call a function on the target cpu. Early mechanism not available.
Change-Id: I9d049e618c319c59729d1ab53fb313b748f82315
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3212
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
This is probably incomplete. Is locking needed? Should we notify the
next writer (if any) that the port is writable when flushing the output?
Change-Id: I2566e2d036a61af4819894a44f57603179aa27df
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2516
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
This allows you to pass node_ref's around like you can entry_ref's.
Added node_ref_flatten(), node_ref_unflatten() and node_ref_swap() to
MessageUtils. These are close cousins to entry_ref_flatten(),
entry_ref_unflatten(), and entry_ref_swap() but for node_ref's.
Added B_NODE_REF_TYPE to TypeConstants.h in the Support Kit.
Added B_NODE_REF_TYPE to Debugger and ByteOrder in Support Kit,
B_NODE_REF_TYPE is treated the same as a B_REF_TYPE (entry_ref).
Add documentation for new NodeRef methods and B_NODE_REF_TYPE.
Change-Id: I32c6ed276bf1a7894a835b9fc9de5a882c35883c
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3182
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Recalculate line breaks in FrameResized() if word-wrap is on, otherwise
only move the text rect into position. StyledEdit was recalculating line
breaks before on resize (we have to in this mode) and the frame offset
updates for non-wrapping text views are inexpensive. This makes resizing
text view's work like StyledEdit everywhere.
Scroll to cursor when word-wrap setting changes if text view is editable.
If you are viewing a long document changing word-wrap can move the cursor
quite far, so scroll back to it.
Fix _ActualTabWidth() pen location for right and center-aligned text views
so that tabs widths are calculated correctly.
Reset fTextRect horizontal limits to bounds minus insets in
_RecalculateLineBreaks(), then grow fTextRect based on alignment when
wrap is off.
Fixing insets also fixes right and center-aligned BTextViews.
Left-aligned text view's grow right, right-aligned ones grow left,
and center-aligned ones grow out.
Make extra scrolling space for all aligned text views go the other way
from how it did in hrev24130 (and on left-aligned text view's too) so
that half the text is visible when you edit past the end or before the
beginnning of a text view instead of none of it.
Fixes#1651#12608#13796#15189
Do not _RecalculateLineBreaks() if text view bounds are invalid.
In SetText() detect invalid text view bounds and resize the view to the
width and height of the first line. Then recalculate line breaks.
This fixes BAlert text view size issues.
Fixes#16481 (regression from hrev54496.)
Remove useless and heavy computation. There is no point in computing line
breaks for a 10px wide text view and it takes a long time because it needs
a lot of linebreaks. The view eventually gets laid out properly.
Fixes#5582 (which was not locale-related, after all.)
Only apply default insets if text rect is set to bounds. This ensures
that apps that manipulate the text rect can continue to do so without
the default insets interfering while apps that don't can benefit
from the defaults. If you want to set the text rect to bounds and
not use the default insets you must override the default by calling
SetInsets(). This prevent the default insets from being applied once
apps have changed the text rect fixing a bug in Icon-O-Matic where the
text rect insets were being applied incorrectly.
Fixes#16488 (regression from hrev54496.)
Reduce left and right insets inside text views from full label spacing
to half label spacing. Unify padding between BTextControl and BTextView.
Move fLayoutData->UpdateInsets() to private BTextView::_UpdateInsets()
because we need access to BTextView member variables when deciding
whether or not to add the default padding or not.
_UpdateInsets() changes:
* Don't update insets if BTextView::SetInsets() was called.
* Don't add default insets unless fTextRect is set to view Bounds().
* Do not set the right and bottom insets to left and top if negative,
set them to 0 like we do to left and top -- DeskCalc bug otherwise.
Fixes#15688
Other BTextView fixes:
* Replace max_c and min_c with std::max and std::min respectively.
* Remove scrolling from one instance of BTextView::SetText() as it
produced undesired results while editing a scrolled text view.
* Add default insets in _UpdateInsets()
* Fix scrolling when entering and deleting text so that some part of
the text is always visible. Make visible scroll width depend on font
size.
* Allow scrolling to a negative offset in x but not y. This allows you
to scroll the entire contents of right and centered-aligned text views
whose content does not fit in the box.
* Change _Refresh() to take an offset instead of a bool so that you can
scroll to any offset.
* Replace TextLength() with fText->Length() in a couple of places.
TextControl changes:
* Set text rect in BTextControl::DoLayout().
* Remove AlignTextRect() from TextInput.
Fix the following problems in apps:
ScreenSaver: Set text rect in PreviewView::AddPreview().
Tracker: Set "Edit name" text view insets to 2. Tweek text rect position
to be on top of label in icon, mini-icon, and list mode. Add a TODO that
the text rect is a pixel off from the name on some files.
Mail: Remove _AlignTextRect() and FrameResized() from AddressTextControl.
Use default insets on the text view, defaults are fine here.
DeskCalc: Set insets based on font size in ExpressionTextView
SetTextRect() instead of manipulating the text rect.
Remove _CheckTextRect() and related methods from InputTextView.
Icon-O-Matic: Remove _CheckTextRect() and related methods from InputTextView.
WebPositive: Remove _AlignTextRect() and FrameResized() from URLTextView
and call SetInsets().
StyledEdit: Word-wrap and FrameResized() changes ported to BTextView.
Fixes#16476#16480#16488 (regressions from hrev54496.)
Change-Id: Ifeca6077f8815ccd86d5a3880f99556298aaf0fe
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3152
Reviewed-by: John Scipione <jscipione@gmail.com>
When a thread is created, it is expected that some other thread (usually the
creating thread) will want to make sure it completes. This is done using the
pthread_join() or wait_for_thread() calls.
It is possible that threads end before another thread waits for its completion.
That's why there is a dead thread list for each team, which holds thread ids
and their exit status so that a call to pthread_join() or wait_for_thread() in
the future can complete succesfully.
The dead thread list was limited to 32 threads per team. If there would be
more, the oldest thread would be kicked off. This could cause issues in
situations where a team would create more than 32 threads, and would start
waiting for their result after they have finished. Some of the calls would fail
because the threads would no longer be in the dead list.
This specifically caused problems for cargo (the Rust package manager), which
could depending on the number of dependencies, could create more than 32
threads. See: https://github.com/nielx/rust/issues/3
This change removes the limit of dead threads within a team. Note that there is
a risk that a badly written program that does not detach or joins its threads
can make this an endless list, but the impact is relatively small (dead threads
only occupy a bit of kernel memory).
Change-Id: I0135dd54e10ee48a529f23228d21237d4f1a74e2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3178
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
The catalogs are loaded from separate files, so there is no need to have
an app entry_ref to load them, just a MIME type is enough.
The implementation is a bit simplified: only the default catalog format
is allowed (unlike when loading from entry_ref, where extra catalog
formats can be added in add-ons).
Unrelated cleanup: remove unused code to load catalogs from attributes
of an application. We considered this when designing the locale kit, but
using resources or separate files works better.
Use this in Cortex, where some strings are in a static library, so they
don't have an associated executable or library or add-on to identify
them. The code in Cortex is not complete localization, several parts
should use StringForRate, BStringFormat, etc.
Change-Id: I09be22b1f50891250c4497c51e1db8dcee279140
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3172
Reviewed-by: Kacper Kasper <kacperkasper@gmail.com>
When copying an area with vm_copy_area only the new protection would be
applied and any possibly existing page protections on the source area
were ignored.
For areas with stricter area protection than page protection, this lead
to faults when accessing the copy. In the opposite case it lead to too
relaxed protection. The currently only user of vm_copy_area is
fork_team which goes through all areas of the parent and copies them to
the new team. Hence page protections were ignored on all forked teams.
Remove the protection argument and instead always carry over the source
area protection and duplicate the page protections when present.
Also make sure to take the page protections into account for deciding
whether or not the copy is writable and therefore needs to have copy on
write semantics.
Change-Id: I52f295f2aaa66e31b4900b754343b3be9a19ba30
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3166
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: Id050fad59ede444f2eab7eca681c6ec44612aaf9
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3160
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: François Revol <revol@free.fr>
Somehow the first review merged only the commit log.
FreeBSD doesn't have m68k anyway, so use fenv from musl with as less
changes as possible.
Change-Id: I6372af6679e6773fbb6bf4c8b5b30512971a97a6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3161
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
This enables generation of exceptions that are due to uncorrected
hardware errors. The exception handlers were already in place and will
now actually trigger kernel panics.
Note that this is the simplest form of MCE "handling" and does not add
anything of the broader machine check architecture (MCA) that also allow
reporting of corrected errors. As MCEs are generally hard to decode due
to their hardware specifity, this merely makes such problems more
obvious.
Might help to discern hardware issues in cases that would otherwise just
triple fault and cause a reboot.
Change-Id: I9e3a2640458f7c562066478d0ca90e3a46c3a325
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3155
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
The BGradient class is a bit strange as it can store any gradient on its
own, butonly the subclasses allow to set some of the fields.
In the asignment operator, the non-base data (which is in an union) was
not copied over.
More importantly, the missing copy constructor led to the default
implementation being used, and BList (used for the color stops) was
being copied using its default copy constructor, resulting in the two
BGradient (original and copy) poinitng to the same stops data. Heap
corruption resulted whenever one of them was deleted.
Having a working copy ocnstructor fixes this. The alternative is making
the copy constructor private or protected to make sure gradients are not
copied, since normally you'd copy only the subclasses, preserving the
C++ type. However there is nothing enforcing that, and manipulating a
BGradient copied from a subclass works just fine.
Change-Id: I28e733eb8a2970b76ae623eabb75ef8435f508af
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3144
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Preserve passed in text rect in fTextRext (unless in layout)
and create an internal version fAlignedTextRect which is used
in place of fTextRect. fAlignedTextRext is aligned to fit the
text rect bounds and grows to fit. fAlignedTextRect always grows
vertically but only grows horizontally if wrap is off.
Left-aligned text view's grow right, right-aligned ones grow left,
and center center aligned ones grow out.
Set fTextRect to bounds in _DoLayout().
Reduce left and right padding inside text views from full label
spacing to half label spacing. Unify padding between BTextControl
and BTextView.
Fixing padding also fixes right and center-aligned BTextViews.
Undo extra scrolling for non-left text views from hrev24130 fixing
a scrolling left and right with mouse bug when it shouldn't.
Replace max_c and min_c with std::max and std::min respectively.
Remove scrolling from one instance of BTextView::SetText as it
produced undesired results while editing a scrolled text view.
Set text rect in BTextControl::DoLayout() and ScreenSaver
PreviewView::AddPreview().
Don't add padding if BTextView::SetInsets() is called. Set insets
to 0 in Tracker "Edit name" setting which prevents default padding
from being added. This is so that when you rename a file in Tracker
the TextView appears on top of the file name text with no padding.
80 char limit fixes.
Fixes#1651#12608#13796#15189#15688
Change-Id: I8c6106effc612f49aff374f29742471628b5df86
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3054
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
- libicule and libiculx do not exist anymore in newer ICU versions
(harfbuzz replaces them), but we didn't actually use them, so remove
them from the build feature and from the package dependencies
- Add namespace usage marcos since the newer ICU packages put ICU things
in a namespace, making it easier to have multiple versions of ICU used
side by side.
No functional change intended, but this makes it possible to build the
code with either ICU 57 (for gcc2) or 66 (for other architectures).
It allows an application to signal that it no longer needs the data in
the given address range and the underlying pages can be discarded and
reused elsewhere. This is finer grained than working with full areas
or mappings at a time and enables unmapping sections of partially used
mappings without giving up its address space.
Compared with punching holes into a mapping by "mapping over" with
PROT_NONE and MAP_NORESERVE, this has the obvious advantage of not
producing a lot of unused extra areas and saves the corresponding
resources. It is also a lot "lighter" of an operation than cutting
existing areas.
This introduces madvise() alongside the existing posix_madvise() to
allow for OS specific extensions. The constants for both functions are
aliased, the POSIX_MADV_* being a subset of the MADV_* ones without the
non-POSIX extensions. Internally posix_madvise() simply calls madvise().
MADV_FREE is commonly supported in other OSes with various subtle
semantic differences as to when pages are actually freed/cleared and how
or whether the pages are counted against the memory use of a process.
In the variant implemented here, pages are always immediately discarded
and memory counting is not altered. This behaviour should be considered
an implementation detail and may be altered later. The actual unmap and
discard could for example be delayed until pages are needed elsewhere to
reduce overhead in case of repeated discarding and remapping.
Note that MADV_FREE doesn't really align with the rest of the madvise()
API as it works like a command (i.e. discard these pages) and does not
add an attribute to the pages in the given range (i.e. mark these pages
for quick access from now on). As such, an MADV_FREE does not need to be
undone by setting a different advice later on, unlike how the other
flags work. This discrepancy may be the reason why it is not part of
POSIX.
Change-Id: Icc093379125a43e465dc4409d8f5ae0f64e107e0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2844
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Pages in the given range are unmapped and freed without getting written
back anywhere. It can be used whenever a caller does not care about the
data in the given range anymore and wants to reduce page pressure.
Change-Id: I8bcce68fab278efef710d3714677e1d463504a56
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2843
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The limit was set when creating limits.h back in hrev88. It seems to be
used only in glob(). The limit is quite low by today standards and
prevents building icu 67.
I guess the liit was put at 32K because that's what BeOS did, but I see
no reason to keep it that way.
Change-Id: I74f95d9b56891dd90c79b7ced35ca8d1ec81d6ab
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3117
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: Ifbd82ef7bfc2c39b2aeb5c25be177421cd22d246
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2920
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
This replaces the use of the hard-coded scroll bar size constants
and instead asks the scrollbars for their preferred sizes directly.
Right now, this is a giant no-op since BScrollBar just returns
the same hard-coded size when asked. The next commit will, however,
change that.
It was always enabled, and disabling it would break ABI.
If we want to make it disable-able, it needs to be a setting,
but I don't really see a reason for that.
* Migrate some platform agnostic architecture code into
boot/arch from efi/arch. This helps to avoid conflicts
between kernel and boot sources as well.
* Conflicts between arch_cpu in efi and kernel code means
bootcode really should *never* directly use kernel arch
headers. (other platforms don't, which is why they don't
have this same issue)
* We carefully thread any needed kernel headers (namely
assembly helper macros) into the bootloader headers without
mixing in the whole conflicting kernel/arch headers.
* ARM now properly get its cpu init code called, and we
progress further into the EFI bootloader.
Change-Id: If67ec9758b5ce68563ebd9eb45d5196401911c67
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2975
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
None of these were used; they were all imported with the original
root Haiku commit, and they are totally unrelated to PulkoMandy's
new SPARC work. Plus, they were also under a BSD Advertising Clause
license.
The BSD implementation was under the Advertising Clause,
so we might as well take the opportunity to replace the
implementation entirely with musl's.
Header also rewritten to be a Haiku one; the constants
are left unchanged of course.
Taken from FreeBSD; some minor cleanup elsewhere.
udp.h rewritten entirely as it contained no copyrightable
material and bears little resemblance to BSD's.
* Remove functions not even FreeBSD defines.
* Remove dependency on unnecessary headers.
* Update copyright headers to match FreeBSD's; includes
removal of the advertising clause.
* Move some private structs to netresolv port_before.
Unfortunately, it seems musl implements very little of this file,
so we may wind up sticking with netresolv for its implementation.
* Remove all functions and a number of constants that neither
glibc nor musl define or support (and even FreeBSD does not
declare a good number of these anymore.)
* Redeclare the primary flags in terms of (1 << X) instead
of raw 0x... for readability (the constants at the end
do NOT match up to their definitions in glibc, musl, and BSDs!)
* Remove usage of unneeded headers, and __BEGIN/END_DECLS.
* Replace non-Haiku license headers with the ones from FreeBSD,
which notably contain a removal of the advertising clause.
ABIs remain unchanged, but a small set of applications that
use these esoteric APIs may not compile anymore (are there
any remaining?)
These are not in the standard and are not declared by glibc at all.
The symbols remain for any applications that are still using them,
for now.\
Change-Id: Ie6b4a6b5ec3231c304e05ce9cb38c67d9ee51ad7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2942
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Utilize user_memcpy and IS_USER_ADDRESS when necessary to prevent SMAP violations.
Also add a "wacom_device_header" struct to more easily share data between the wacom
kernel driver and input_server addon.
Should fix#14589
Change-Id: Ie2784020b21523f82fd450a2db2de60ccf9d6620
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2783
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* This allows file systems to retrieve the actual error code on a
failure, and report it to the user.
* All affected file systems have been adjusted to the API change.
This is a binary incompatible change.
Change-Id: Id73392aaf9c6cb7d643ff9adcb8bf80f3037874c
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2913
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
