the complete extent info or not.
* file_map_translate() now cuts down the request to the file bounds.
* Adjusted BFS and FAT to the API changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22913 a95241bf-73f2-0310-859d-f6bbb57e9c96
that can be used by file systems.
* Changed the way the file cache works: instead of reading/writing to the
underlying device directly, it can now be used for any data source, ie.
also network file systems.
* As a result, the former pages_io() moved to the VFS layer, and can now be
called by a file system via {read|write}_file_io_vec_pages() (naming
suggestions are always welcomed :-)). It now gets an FD, and uses that to
communicate with the device (via its fs_{read|write}_pages() hooks).
* The file_cache_{read|write}() functions must now be called without holding
an I/O relevant file system lock. That allows the file cache to prepare the
pages without colliding with the page writer, IOW the "mayBlock" flag can
go into the attic again (yay!).
* This also results in a much better performance when the system does I/O and
is low on memory, as the page writer can now finally write back some pages,
and that even without maxing out the CPU :)
* The API changes put slightly more burden on the fs_{read|write}_pages()
hooks, but in combination with the file_map it's still pretty straight
forward. It just will have to dispatch the call to the underlying device
directly, usually it will just call its fs_{read|write}_pages() hooks
via the above mentioned calls.
* Ported BFS and FAT to the new API, the latter has not been tested, though.
* Also ported the API changes to the fs_shell. I also completely removed its
file cache level page handling - the downside is that device access is no
longer cached (ie. depends on the host OS now), the upside is that the code
is greatly simplified.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22886 a95241bf-73f2-0310-859d-f6bbb57e9c96
think it wasn't a really good idea. The alignment of shortcut
charachters and submenu symbols could use some more work, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22849 a95241bf-73f2-0310-859d-f6bbb57e9c96
Mac is there already (TODO: rename some stuff from apple to mac).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22770 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added missing job classes (they don't do anything yet, though) and
completed the implementation of the job generator.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22767 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rewrote TextView.h
* Renamed all private methods to have the underscore prefix.
And also:
* Whitespace and line width cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22688 a95241bf-73f2-0310-859d-f6bbb57e9c96
This should help to reduce the number of warnings imported code will throw
during compilation (helps a lot with tcpdump, for example).
* Since long is 64 bit on 64 bit platforms, we might want to think about doing
that change for the Haiku types int32 and uint32 as well.
* Fixed several occurences of hidden type problems.
* Fixed build of the stack and TCP under BeOS.
* Fixed incorrect typedef in socket_interface.h.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22643 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed Background.h - to be replaced by the one in be_apps (which has OT license)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22579 a95241bf-73f2-0310-859d-f6bbb57e9c96
accelerant (or the app_server via EDID info). It's still experimental
API, and opinions are welcome.
* Moved BPrivateScreen into the BPrivate namespace.
* Rewrote Screen.h.
* Introduced a BScreen::GetMonitorInfo() method, and implemented it in the
app server as well (ie. AS_GET_MONITOR_INFO).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22563 a95241bf-73f2-0310-859d-f6bbb57e9c96
the accelerant, as well as its EDID info. B_GET_PREFERRED_DISPLAY_MODE and
B_GET_EDID_INFO are both optional. The preferred mode will be taken from the
EDID info if only the latter hook is implemented, or the former returned an
error.
* Currently, the app_server should correctly set the preferred mode on start,
but no accelerant supports that yet, so it's not really tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22520 a95241bf-73f2-0310-859d-f6bbb57e9c96
hence CancelInputMethod()), but it implements part of it. To avoid code
duplication, I added a private _SetRunArray() call, which does most of
the work, except cancelling the input method, and calling Refresh().
Removed some unneeded code from CancelInputMethod(), some small changes
in HandleInputMethodChanged.
-Questa linea, e quelle sotto di essa, saranno ignorate--
M src/kits/interface/TextView.cpp
M headers/os/interface/TextView.h
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22489 a95241bf-73f2-0310-859d-f6bbb57e9c96
additional partition_data* child parameter now.
* _user_get_partitionable_spaces() doesn't need to copy the buffer into
the kernel, since it is no input parameter. It also copies back the
actual partitionable spaces count on error, now -- B_BUFFER_OVERFLOW
is returned when the buffer was too small, but then the count must be
returned too.
* Fixed several instances of syscall implementations that unloaded a disk
system, although they didn't load it in the first place. This screwed
up the load count with undesirable consequences.
* _user_create_child_partition() would set the size to the supplied
offset.
* Fixed broken loop in KPhysicalPartition::CreateShadowPartition().
* KPartition::RemoveChild() notified the listeners about the wrong
event.
* Intel partitioning module:
- The *_get_partitionable_spaces() correctly return B_BUFFER_OVERFLOW
now, if the supplied buffer is too small.
- Implemented a part of pm_shadow_changed(), which creates and updates
the PartitionMap, so that the validate_*() hooks have a chance to
work at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22475 a95241bf-73f2-0310-859d-f6bbb57e9c96
physical partition, unlike get_partition() which returns the shadow
partition, if it exists.
* Added B_PARTITION_SHADOW[_CHILD] partition pseudo operation values for
the shadow_changed() hook, notifying a disk system, that a shadow
partition has been created.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22472 a95241bf-73f2-0310-859d-f6bbb57e9c96
system initialize() hooks. It's often the only info about the
partition one needs and thus locking the partition just to get it is
no longer necessary.
* intel partitioning system:
- Removed passing around block sizes. We require 512 byte sectors
anyway. In fact using the parent partition's block size was even
wrong.
- Simplified writing the partition map sector.
- Simplified and corrected the partition map initialization.
- We don't fail identifying a partition anymore, if the partition map
contains no partitions. We would never identify a freshly
initialized partition map before.
- Made pm_identify() more intelligent: It determines the priority to
return depending on whether the partition is the device itself and
whether we have recognized child partitions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22447 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the page writer don't allow to block, while all other writers do. This fixes
bug #1509. The reason the page writer needs this is because it marks several
pages from different caches as busy.
* Fixed a warning about ASSERT being defined already in BFS, since
util/DoublyLinkedList.h now includes debug.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22434 a95241bf-73f2-0310-859d-f6bbb57e9c96
vfs_select.h, respectively moved most of it into the new kernel
private header wait_for_objects.h.
* Added new experimental API functions wait_for_objects[_etc](). They
work pretty much like poll(), but also for semaphores, ports, and
threads.
* Removed the "ref" parameter from notify_select_events() and the
select_sync_pool functions as well as from fd_ops::fd_[de]select(). It
is no longer needed. The FS interface select() hook still has it,
though -- the VFS will always pass 0.
* de]select_fd() take a select_info* instead of a select_sync* + ref
pair, now. Added respective functions for semaphores, ports, and
threads.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22416 a95241bf-73f2-0310-859d-f6bbb57e9c96
characters first, and then falls back to take everything. fTrigger is now
uint32 and works with all unicode characters; unlike in BeOS, the
MenuTriggerTest application now works correctly in Haiku.
* fTriggerIndex is now a character position, not a byte position of the label;
this allows BMenuItem::DrawContent() to draw the trigger at the correct
position, even if there are multi-byte UTF-8 characters.
* The above fixed bug #1506; triggers are still not working, though.
* Rewrote Menu.h header.
* Renamed all private methods (that are not called by BWindow) to have the
underscore prefix.
* Removed unused methods.
* Some minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22384 a95241bf-73f2-0310-859d-f6bbb57e9c96
If a Tab is partially out of the window, clicking on it to make it the
active tab will scroll it to be completely visible.
The best solution would probably be having a way to scroll through the
whole list of tabs, or something like this. But for now, at least, makes
the tabbed terminal a bit more useful.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22325 a95241bf-73f2-0310-859d-f6bbb57e9c96
text view, ignore the divider for this (application code could layout
the textview itself, and fDivider might not be maintained)
* change Draw() and TextInput::MakeFocus() accordingly
this fixes the weird placement of text controls in Beam
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22134 a95241bf-73f2-0310-859d-f6bbb57e9c96
content name are supported.
* Added file_system_module_info::flags (analogously to
partition_module_info::flags) which indicate which disk device
features the FS supports.
* Replaced the
file_system_module_info/partition_module_info::supports_*()
hooks by a get_supported_operations() hook and for partitioning
systems additionally a get_supported_child_operations() hook.
* Updated file and partitioning systems accordingly.
* Updated fs_shell accordingly.
* Updated the DDM accordingly. The syscall interface remains unchanged,
though.
* _user_supports_initializing_partition() also checks whether the parent
partitioning system is content now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22043 a95241bf-73f2-0310-859d-f6bbb57e9c96
