My upcoming changes to use our "futexes" instead of semaphores
will obviously not work on non-Haiku platforms, so we now
need a copy of this class in libbe_build.
The sparc openboot implementation can run executables in the a.out
format. We used to generate these using objcopy, but this does not work
anymore as binutils is deprecating a.out format support.
- Import elf2aout from FreeBSD
- Add some missing bits to our elf.h and have a copy of it in the build
headers so it can be used to build elf2aout for the host platform
(tested for Linux)
- Use it to generate the sparc haiku_loader
- Adjust the bootloader linker script to have two "program headers": one
that is not loadable and contains the ELF headers, and the second one
that is loadable and contains the actual code and data. Unlike
objcopy, elf2aout relies only on the program headers to know what to
put in its output file (sections are ignored), so this is required
otherwise we end up with the ELF header nested inside the a.out file,
and everything offset from the expected load address as a result.
Confirmed that this allows to build the loader and run it as far as
before, so I'm back to needing to implement some MMU support now.
FreeBSD commit: 7551d83c353e040b32c6ac205e577dbc5f2c8955
Change-Id: I90b48e578fa7f148aeddd8c5998fdddc5cfa73fa
Reviewed-on: https://review.haiku-os.org/c/1557
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
If this triggers, it means something is using the "build" errors while
the build system thinks it is not, which is always an error. Nothing
triggers this at present, but some subtle bugs in the build system
a while back would have been caught by this.
Use BStackOrHeapArray instead of using auto_ptr to array.
Change-Id: I171cb002829c36ec51ba7d1e387869263e2a40f2
Reviewed-on: https://review.haiku-os.org/745
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
This was done using macros before, which isn't the way we have things set up.
In theory that method should work, however if not all consumers include the
libroot_build headers properly, then it breaks in subtle but confusing ways,
which is not what we want at all.
Thanks to Jessica for advice.
Change-Id: Idd45df5547daecf8239932957088da03ddfccf87
As it turns out, using the xattr emulation layer plus "libgnu"
causes some strange mixups at package build time, and so packages
built with it were winding up with no attributes at all.
So I've just bitten the bullet and written a full passthrough layer
to the system attributes. Verified using a full build of haiku.hpkg
this time ... after a lot of painful debugging of symlink mixups.
Hopefully I am finally rid of this plague...
To quote jscipione (from 95e8362c52),
"Let me tell you a story about a bug" -- though this tale spans a much
lesser time than that one did.
In 5e19679ea3, I enabled libroot_build for
Haiku, instead of using the system libroot as we had before. There were
a number of bugs introduced along with this that I hadn't fixed (and there
may be more after this), but most of the obvious ones (crashes on x86_64...)
were fixed shortly enough.
Attribute usage, though, was a different story. Unlike most of the POSIX
calls in libroot, which were aliasing system functions no matter what the
platform, the attribute calls were not, as they are specific to Haiku.
Initially I had completely forgot about them, and it wasn't until a few days
later when I noticed that I had an "attributes" directory in my generated
that I realized that the "generic" attribute layer was being used on Haiku.
I attempted a fix for this in 5e19679ea3,
thinking that would clear the problem up, but I didn't actually run a test
beyond seeing that my BuildConfig had been updated properly. In fact,
BuildSetup was hard-wired to not even pass that definition through on
Haiku, and so that commit had in effect caused nothing.
My initial "fix" of just changing BuildSetup then caused a build failure,
as while libroot_build itself compiled, it ran into errors whenever attributes
were used, because in letting the real libroot's attribute calls shine
through, I had bypassed libroot_build's FD emulation/shim layer.
Then I tried and failed at three separate attempts to solve this with code:
- a version of the "fs_attr_...h" interface for Haiku. This proved possible
in theory, but in practice I would need to reimplement a lot of attribute
handling code in it, because all I had access to from there was syscalls.
- a version of "fs_attr_untyped" that bypassed its reimplementations of
the "fs*attr" functions for the libroot ones, only using the FD shim layer.
This proved possibly not even theoretically possible because it would have
caused preprocessor hell in some of the build headers, and also assumptions
about how attributes are read were totally different.
- a completely new "fs_attr_haiku" that was a completely new interface to
the fs*attr functions. This proved practically impossible because of the
need to include structures from the system libroot to call out to readdir,
etc. that attempts to solve would also have caused preprocessor hell.
Then I realized that the Linux xattr emulation library, which I'd used
as a reference when attempting the first solution, was shipped by default
as a system library in all builds of Haiku ... and so I could just tell
fs_attr_untyped to use the Linux xattr handler, and then link against libgnu.
So that is how I arrived at this strange and decidedly unorthodox solution
to a problem of my own creation.
Previously we just used the system libroot, which of course meant
that when libroot's ABI changed, the build broke. Now we use the full
libroot_build that we do on non-Haiku platforms. The logic for "BeOS-compatible
but not Haiku" does not really apply anymore, so it has been gutted where
appropriate (and libhaikucompat has been decoupled from the build.)
The only caveat here is the change to Errors.h -- we really should be using
the system's one where I included the one from the tree, but for whatever
reason, GCC2 refused to handle the #include_next properly.
Fixes the build breakage of Haiku-on-Haiku by my prior commits (sorry).
Now that we do not target BeOS and also do not include the main headers
directory when building "build" binaries, we can drop the separate
config_build directory and thus also the separate BeBuild.h, and just
..-include the regular one.
The build BeBuild.h defined empty _IMPEXP_ROOT and _IMPEXP_BE preprocessor
macros that the regular one does not; so I also re-synchronized
headers which used these as needed.
This file was apparenly based off the BeOS one (as is evidenced
by the "Be Incorporated" copyright ... which is problematic.)
Now it's directly based off of the non-build one.
* Put it in the BSupportKit namespace, following the style introduced
with the package kit for now.
* The BSupportKit::BJob class no longer knows about the package kit's
Context class. However, the BPackageKit::BJob class does.
* Due to the namespace juggling, a lot of files had to be touched.
* The JobQueue class remains private.
* Due to the way Haiku is built on itself, you cannot build this change
under Haiku with an older release.
* BDaemonClient: Move inner class BCommitTransactionResult to top level
and make it public.
* BCommitTransactionResult:
- Add a whole bunch of specific error code enum values. Such an error
code is now the primary error, as opposed to before where we would
mix status_t and enum value errors. There's a systemError property
of type status_t which may provide additional information, though
(depending on the primary error type).
- Remove the errorMessage property. Due to mapping all errors to the
specific error codes this is no longer necessary. Mixing such a
message with another error description is also not very helpful when
it comes to localization (still not supported, though).
- Add several properties (paths, strings, error codes) that serve as
arguments to the primary error and are used by FullErrorMessage().
- Add issues property, a list of instances of new class
BTransactionIssue. Those describe non-critical issues (e.g. failed
update of a settings file) that occurred in the process of
committing the transaction. Those issues should be presented to the
user by the package management program.
* Exception: Adjust to transport the BCommitTransactionResult
properties.
* CommitTransactionHandler, FsTransactions, Root, Volume: Adjust to
BCommitTransactionResult/Exception changes.
* CommitTransactionHandler: Now requires a BCommitTransactionResult to
which it adds the issues it encounters. The reply BMessage is no
longer needed, though.
* Volume: Refactor common code from the three methods that use
CommitTransactionHandler into new method _CommitTransaction.
* This avoids polluting the Haiku headers with host issues,
as pointed out by Axel.
* Should also resolve build issues for various versions of
host compilers that were introduced in previous commits.
* This will be used to implement compressed http streams
* Remove the custom BDataOutput class, and use BDataIO instead, for
easier integration with existing code.
* Previously PE binaries would trigger the "incorrectly
executable" dialog. Now we get a special message for
B_LEGACY_EXECUTABLE and B_UNKNOWN_EXECUTABLE
* Legacy at the moment is a R3 x86 PE binary. This could
be extended to gcc2 binaries someday far, far, down the
road though
* The check for legacy is based on a PE flag I see
set on every R3 binary (that isn't set on dos ones)
* Unknown is something we know *is* an executable, but
can't do anything with (such as an MSDOS or Windows
application)
* No performance drops as we do the PE scan last
* Tested on x86 and x86_gcc2
* Build libsolv and the dependency solver part of the package kit for
the build platform.
* Add build tool get_package_dependencies. Given a list of package files
and a list of repository files it determines the additional packages
that need to be retrieved from the repositories and prints their URLs.
* Add rules to work with external repositories in the build system
(build/jam/RepositoryRules):
- PackageRepository declares an external repository with all its
packages. The URL of the repository file isn't specified. It is
computed from a given base URL and the SHA256 hash of the list of
package files.
- GeneratedRepositoryPackageList generates a file containing the file
names of all packages in a repository.
- IsPackageAvailable returns whether a package is available in any
repository.
- PackageURL returns the URL for a package.
* Declare the HaikuPorts repository for x86_gcc2
(build/jam/repositories/HaikuPorts/x86_gcc2).
* Add rule AddHaikuImagePackages to add a package to the image and rule
IsHaikuImagePackageAdded to determine whether a package has been
added.
* OptionalPackages: Remove all entries that just downloaded and
installed an external package. AddHaikuImagePackages can be used
instead and is used in the remaining entries. Also move the remaining
optional package dependency declarations from
OptionalPackageDependencies here.
* ExtractBuildFeatureArchives: Instead of the URL parameter a package
name must be specified now. This allows to simplify BuildFeatures
significantly, since there's no dealing with URLs anymore. "if" out
the entries that aren't supported yet.
* build_haiku_image: For the packages installed in system and common
resolve their dependencies and download and install them as well.
* For all identifiers: Rename global settings file to global writable
file. We want to use the respective attribute also for other writable
files, not only settings files.
* User settings file/global writable file info/attribute: Add
isDirectory property/child attribute. This allows declaring global/
user settings directories associated with the package.
... <package/hpkg/PackageAttributes.h>, which also defines other
properties (name and type) for each attribute. It does so via a macro
that the caller can define to generate whatever code is desired.
Global and user settings files can be declared. For global ones an
update policy can be specified. If not specified, the settings file is
not included in the package, but created by the program (or user) later.
If an update type is specified, it defines what to do with the settings
file when updating the package to a newer version.
User settings files are never included in the package; they are always
created by the program or the user. If the package contains a template/
default settings file, it can be declared, but for informative purposes
only.
It uses sub-namespace BPackage::BHPKG::V1. Unlike the one for the
current format version, the V1 version of BPackageInfoContentHandler
lives in BHPKG(::V1) sub-namespace and is private.
* This pulls in some more stuff, like libicon and agg which are also
included in libbe_build, now.
* Update a few libbe_build classes and headers needed to get things
building.
* This likely breaks the <build>mimeset build on Haiku.
The implementation is temporary. Currently it reads through the packages
in the respective packages directory and checks against the package
links. Once package activation is tracked explicitly we'll use the
activation file/directory.
