The definition in SupportDefs.h using gcc builtins is sufficient. No
need for a custom one. The same approach is used on x86 with gcc8
already, but other platforms had not been adjusted to use it.
Change-Id: I3973ff723a31f90cc8d19ac098eb1e85d471d610
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3594
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The sparc ABI reserves the g7 register for this.
Change-Id: I93b81ecef72cde859972ef7b7f6b9991d35f9f29
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3583
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
It was bumped for bios and efi from previously very low values, but
other architectures did not follow.
Change-Id: I6ce92e2cdb0261d4d0637753e77d555d407073fc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3575
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Introduce fat_shell for build system fat manipulation
* Will theoretically let us do away with mtools when we
have another internal tool for partition manipulation
Change-Id: I661be556e79009842f157a9402c8f85da85d6336
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3556
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
la57 kernel support is required. we simply add a 5th level and enable the cr4
feature. the safemode option "256tb_memory_limit" is named after the 4gb one,
but the current support is limited to 512GB as before (this can be later extended).
Change-Id: I922774473c4a6112a0e4ff74162285ad58aa53af
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3552
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
* Makes our UEFI bootloader somewhat FDT/DTB aware on all
architectures.
* Will report when an FDT is found, and provide it to kernels
that want it.
Change-Id: I90324fc0579a9c835e60568fa9b654c2df0aba27
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3543
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
It allow to use arbitrary handle type, null value and destructor function.
Change-Id: I87c444cb7ef1b08d1dbed7fe4171700171d651d2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2977
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
First implementation of reading sectors from an SD card.
This is not the best performance for many reasons:
- No DMA
- Reads only one sector at a time
- Cannot read more than 512 bytes per syscall
Also there are major limitations:
- Cannot read less than 512 bytes. The hardware of course works in full
sectors. The mmc_disk driver should go through the io scheduler to
make sure requests have a reasonable size and offset, and nothing
tries to read just a few bytes in the middle of a sector.
- SD cards only (no SDHC, no MMC)
Architecture problems:
I think too much of the implementation is done in sdhci_pci and should
be moved to the upper layers. However it is difficult to say without
having implemented DMA (which indeed will be at the low level of the
sdhci controller). It doesn't help that the order of operations is a
bit different depending on wether there is DMA or not. In DMA mode you
first prepare the buffer, then run the command. In non-DMA mode you
first send the command, then read the data into the buffer. We need an
API at the mmc_bus level that doesn't care about that low-level detail.
There are other things that the MMC bus should be doing however, such
as switching to different clock speeds depending on which card is
activated and how fast it can go.
At least the following should be done:
- The read method for mmc_bus and sdhci_pci should use a scatter-gather
structure as a parameter instead of a single buffer
- See if can be integrated into ExecuteCommand at sdhci level (it's
essentially a command with an additional data phase)
Change-Id: I688b6c694561074535c9c0c2545f06dc04b06e7d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3466
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
No read and write support for now. But we implement getting SD card
capacity. SDHC is not supported yet (it uses a different layout for the
CSD register which will be rejected by this version of the code)
Change-Id: Ife844a62f3846c0a780259e9a3a08195e2fd965e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1068
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
C++ don't allow zero size class fields. If field with empty class field
is used, it's size will be 1 byte.
Create DeleteFunc instance as local variable at each use instead.
Fixes#16638.
Change-Id: Ifb76c45ea02e9fed014751542ee5f16f41e11d15
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3458
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
The same as CObjectDeleter.
Change-Id: I85c4cb3635f01f13e529ca087324cc2fcb42cfc0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3456
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
It allows to make typedef of pointer types and declaring pointers in headers.
Store of destructor function pointer in CObjectDeleter is no longer needed.
Change-Id: Ic629fd10b28b09f4190edf8ba6b911ca3108ab0e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3455
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Fix 'item' is used after delete.
Pointed out by Clang Static Analyzer.
Change-Id: I8eca3084c97b37015a2da1b96119a458d4eb9aa7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3392
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: John Scipione <jscipione@gmail.com>
Only keep a fixed number of icons in memory at once.
Completes To #15370
Change-Id: I23e3a4fa7559894034f45afb3b536910ea037078
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3367
Reviewed-by: Rene Gollent <rene@gollent.com>
this is queued for issue 8: https://www.austingroupbugs.net/view.php?id=415
this implementation calls the ioctl hook of the filesystem with BSD-like constants
FIOSEEKDATA and FIOSEEKHOLE. if the hook doesn't know the constants, we use the stat size
to return the last hole (as proposed in the draft spec).
Change-Id: I5d052eed87e29b70491a7ff534e244896469d03e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3385
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
the preallocate syscall will call the preallocate filesystem hook, if available.
fix#6285
Change-Id: Ifff4595548610c8e009d4e5ffb64c37e0884e62d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3382
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
According to https://tools.ietf.org/html/rfc3493:
3.2 IPv6 Address Structure
"The structure in6_addr above is usually implemented with an embedded
union with extra fields that force the desired alignment level in a
manner similar to BSD implementations of "struct in_addr"."
Change-Id: Ibe0ee685366398c143cdf9573dcb77566a12888b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3348
Reviewed-by: Rene Gollent <rene@gollent.com>
Currently used by fixup_next_boot_floppy.
Change-Id: I47c10657b5280f00e470a3171ad11744859ce76c
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3310
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
This API change forces all creation of BUrlRequest to be done via
BUrlProtocolRoster::MakeRequest(). This allows the structure of protocol
addons to be altered without breaking ABI for client applications.
Change-Id: I1785c9136c50d19eaa9e57cb9d259ed8d88a5b56
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3080
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
For now it just forwards the command to the SDHCI controller.
The bus will gain more features and functions as work advances (tracking
which card is active, arbitration of DMA transfers, etc).
Change-Id: I094eb84f27e7789387a3f8fb65fba1e5fcfa3e8a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3094
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Update BTab::DrawTab() to pass the current index, the index of the
selected tab, and the index of the first and last tabs into
BControlLook::DrawActiveTab() and BControlLook::DrawInactiveTab().
This allows you to draw tabs differently in your BTab or BControlLook
subclass in many different circumstances.
Modify BControlLook API to add indexes to DrawActiveTab() and
DrawInactiveTab() like so:
void DrawActiveTab(..., int32 index = 0, int32 selected = -1,
int32 first = 0, int32 last = 0);
void DrawInactiveTab(..., int32 index = 0, int32 selected = -1,
int32 first = 0, int32 last = 0);
These extra indexes are not used by HaikuControlLook which relies only
on if the tab is active or inactive to draw.
Add IndexOf(BTab* tab) method to BTabView and document it to get the
index of the current tab in BTab::DrawTab(). Also add a warning in the
BTabView::DrawTab() method not to use the position and full parameters
anymore, use BTabView::IndexOf(), BTabView::Selection(), and
BTabView::TabCount() to get the info you need.
Using a dynamic_cast to a BTabView in BeControlLook to determine if the
view is derived from a BTabView didn't work in the case of WebPositive.
Furthermore, WebPositive does custom tab drawing which needed to be
updated for alternative control look. These index parameters passed from
BTab to BeControlLook allow us to draw the tab like BeOS without relying
on a dynamic_cast to BTabView to get the info.
Reproduce the functionality described above for BTab in WebPositive's
custom tabs. Eliminate no longer needed code in favor of using indexes.
Update WebPositive custom tabs to use BControlLook::DrawTabFrame()
instead of BControlLook::DrawInactiveTab() matching the update made in
BTabView.
In BeControlLook::DrawTabFrame() fill rect with base color, WebPositive
doesn't draw any tab background, so it expects this work to be done for
it.
Eliminate hasFrames variable from WebPositive.
Rename TabSelected(index) to UpdateSelection(index) in WebPositive to
better reflect its purpose.
Adjusted HaikuControlLook::DrawInactiveTab() to draw the tab borders more
selectively. Only draw border if left border is set for top and bottom tabs
or top border is set for left and right tabs. Undo no longer needed frame
manipulation border drawing workaround in HaikuControlLook::DrawTabFrame().
Draw scroll bar triangle without using DrawArrowShape().
Unlike in HaikuControlLook, DrawArrowShape() is used to draw arrows in
BOutlineListView and menus distinctly from how it draws arrows in scroll
bars. Draw our distinct arrows in DrawSrollBarButtons() instead.
This fixes overflow of time edit up-down arrows in Clock prefs and the
collapse-expand arrow in Deskbar not being vertically centered.
In DrawBorders() only inset if we actually draw the border.
Fix alignment issues with DrawSliderThumb dots for example in
MediaPlayer volume knobs.
Draw using line arrays calling AddLine instead of StrokeLine in
several places.
DrawMenuBar() extends to draw final pixel which eliminates an extra
lines at the end of menu bars.
Truncate button labels better fixing a few issues for example keymap
keyboard layout button labels. Button insets has been updated a bit
to fix drawing issues with buttons missing a border.
Using a dynamic_cast to a BButton to determine if a view is a button
in BeControlLook didn't work in the case of the keymap label. Look for
B_FLAT, B_HOVER, or B_DEFAULT_BUTTON flag in BeControlLook::DrawLabel()
to draw the label inverted on click. Pass the B_FLAT flag from Keymap
keys when drawing using BControlLook so that the label is inverted.
Change-Id: I07631f4b006bdb9aeca2adc9cbdf2da54dae8e92
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2866
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Just like post-install scripts which run shortly after a package is
installed, pre-uninstall scripts are run just before a package is
removed. Implements enhancement #13427
* Fix script exit code handling vs script launch errors.
* Bump package and repo file version numbers due to new attribute,
unfortunately makes new .hpkg files not backwards compatible.
* Add pre-uninstall functionality, mostly cloning the post-install
except in a few places.
* Discover that _RunQueuedScripts() is never called, a future TODO:?
* Update package documentation for pre-uninstall scripts, and use of
the boot/post-install directory.
Change-Id: I45596255ce74bc102f6e5b606cbf83e4e4347a17
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1504
Reviewed-by: Alexander G. M. Smith <agmsmith@ncf.ca>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
This is a version of the qsort function allowing you to pass a "cookie" to the function.
Change-Id: I60c645213b9c9590e38b112634fcac1d7969b6d9
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2449
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
when the cpufreq module is loaded, we let the scheduler update its policy.
Improve assert report
CoreEntry::GetLoad() could return more than kMaxLoad.
Change-Id: I127f9b3e8062b5996872aae30b4021b9904fa179
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3216
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
