Building EFI partition for 32-bit anyboot ISO image was disabled
in hrev52443 to fix issue #14656.
As haiku_loader.efi is now available for the x86 architecture
since hrev55917, we can re-enable building EFI system partition
for the 32-bit ISO.
We can also remove the build rules related to HAIKU_ANYBOOT_LEGACY
as it is not used any more.
Change-Id: I9c2c272bcd0f9c1a98ee6cea300374dc26b4818d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5716
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
* The private keys are in possession of Haiku, Inc.
Change-Id: I3b5b004e1dce0102f8a65f6d682f7e428845efe8
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4936
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Move assets to new boot directory
* -hfsplus not valid anymore on cdrtools 3.02
* Throw down some forth I saw in an *old* fedora 12
chrp script. If we ever target ppc64 it might be
handy someday. The text output also lets you know
the cd booted successfully.
Change-Id: I169d887fe8373de1719b98305d01b714f6f6bcbe
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4681
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
EFI System Partition was the last remaining holdout for mtools usage.
Change-Id: I988f82a2f4318f2f90ec1efb80f7ff5c8908aff7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4140
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Previously, all packages on the image, both activated and unactivated,
were in $systemPackages, so if a package actually in /system/packages
had a dependency in the Installer optional package area, the dependency
checking would see no problem but the generated image would be broken.
Now, packages going into /system/packages are treated separately
from those going elsewhere, and error checks added so the above
condition will not occur.
(I ran into this while working on the build-package upgrade
in the following commits.)
Activating all these packages on live boot (especially live DVD where we
also have the write overlay eating up RAM) significantly increases
memory requirements for running Haiku, to the point that Installer may
fail to run. Move them outside the packages/ directory so they are not
activated.
Installer already skips the _sources_ directory when installing, and
lists the contents of _packages_ with checkbox to decide what to include
in the install (they are put in system/packages on the target disk).
Fix from previous version: the Haiku package was installed to /system
instead of /system/packages.
Fixes#15621.
Activating all these packages on live boot (especially live DVD where we
also have the write overlay eating up RAM) significantly increases
memory requirements for running Haiku, to the point that Installer may
fail to run. Move them outside the packages/ directory so they are not
activated.
Installer already skips the _sources_ directory when installing, and
lists the contents of _packages_ with checkbox to decide what to include
in the install (they are put in system/packages on the target disk).
Fixes#15621.
Change-Id: Ibfac14c43dbe708316a0d82ca1c9d49b5cba2aef
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2157
Reviewed-by: Sergei Reznikov <diver@gelios.net>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: Idc50cfee16db5f7c0dbea625a7739ad42b2d7bf0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2249
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* "xorriso doesn't support much of the mkisofs options"
* Dropping the hfs map made our bootloader no-longer get
mapped as :tbxi which means qemu + Apple devices refused
to boot it.
* Switch to genisoimage which can generate the correct image.
(xorriso -as genisoimage doesn't work either)
Change-Id: Id71b97796f5004f6ddf6244644c51a5787f9bf8e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2241
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
- Factor in types changes (introduction of intptr_t)
- Align JamFiles syntax with in progress architectures (arm/sparc)
- Xorriso doesn't support much of the mkisofs options (anymore ?)
- (After a correct bootstrap) one should be able to build @minimum-raw and haiku-boot-cd again
Change-Id: I4f779ad8f2210389fa9b7f7c0a98c3652a64c257
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1983
Reviewed-by: François Revol <revol@free.fr>
Let's make the nightly builds consistent in a way that they would always
be recognized by libosinfo (and, consequently, by GNOME Boxes,
virt-manager, virt-install, ...) by explictly using "nightly" instead
of the $(HAIKU_VERSION) when generating nightly builds.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Change-Id: I6fc4f15be1e8e9244abf14e75308fc825f37b2e8
Reviewed-on: https://review.haiku-os.org/c/1053
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
The current volume-id is "bootimg", does not matter which version of
haiku nor to which architecture the ISO is targetting.
Having a "too generic" name as volume-id directly affects the ISO's
recognition by libosinfo.
From now on, let's use:
haiku-$(HAIKU_VERSION)-$(TARGET_ARCH)
Which would generate an ISO with volume-id as:
Volume id: haiku-default-r1~beta1-x86_64
Fixes: #14695
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Change-Id: I25e2f5338403058a363872abd196d698764cc3c1
Reviewed-on: https://review.haiku-os.org/c/1034
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
It seems that not all Linux distributions ship an EFI-enabled
cdrtools (i.e. mkisofs takes -e option), Arch being one that
does not.
So instead, we now use xorriso universally, which is
as (or more, in most cases) widely available, and supports
emulating mkisofs with the EFI commands universally.
This also has the added benefit that we can drop genisoimage
support altogether.
These data files are used in the generation of build targets,
so moving them to src/data alongside the package_infos & etc.
makes more sense.
They don't seem to be activated properly though (I added some tracing
to try and figure out why they aren't used but haven't gotten to the
bottom of that yet.)
Strictly POSIX-compliant shells (like dash) do not allow sourcing
files in the present directory without "./". The script really should
not know or care about what directory the passed files are in,
so now we add a jam grist to make the passed paths absolute.
Fixes the build on all systems where /bin/sh is dash or a similarly
POSIX-compliant-no-extensions shell (i.e. virtually all Linux.)
Also add AddHaikuImageSourcePackages invocations for all relevant
(i.e. [L]GPL'ed) packages.
Doesn't truly fix#9990 as PackageKit cannot be used to install source
packages, but this is enough for creating a redistributable image,
so that ticket can be moved out of the beta1 milestone now.
Revert "repo rework: Remove stubs; Breaks repo compat."
Revert "repo rework: Remove need for repos to be self-aware"
This reverts commit a2b2f4d642.
This reverts commit 602076ef82.
This reverts commit 5ffaf72c8a.
These changes break the build on Haiku and the ability to create repo
mirrors, for the lack of a replacement for the URL (an UUID was evoked
on the mailing lists, but not implemented).
We are due for a release soon, please don't break the build.
* See #12917 for details.
* Squashed to one commit to make revert easy if we
run into any issues.
* pkgman is now pre-attached to the 'current' repo
version within nightly images so they can be updated
by default.
* This shouldn't impact us keeping older sets of package
versions by commit hash for building older hrevs.
* There are XXX stubs with "Kill me". These will need
to be dropped after users are given sufficent time to
upgrade. We're dropping a previously required field (url)
so making this a slowish roll out.
* Makes the repos a lot less restrictive which should
help PM package building automation be a bit easier.
* Once this stuff smooths out, we'll add UUID's to the
repo definitions for duplicate repo detection.
* From now on, the gcc-specific system libraries (libgcc, libsupc++ and
libstdc++) are provided by separate packages built along with gcc:
- gcc_syslibs contains the shared libraries (libgcc_s.so, libsupc++.so and
libstdc++.so)
- gcc_syslibs_devel contains the static libraries and both c++ and gcc
headers
The shared libraries now make proper use of symbol versioning and there
are version-specific symlinks
* The buildsystem has been adjusted to no longer use the libraries and
headers from the cross-compiler, but use the ones provided by the
above-mentioned packages. The only exception is that the 32-bit libraries
required for the bootloader of the x86_64 architecture are still taken
from the cross-compiler.
Parentheses in target names are considered by Jam to mean an archive
member. We have to explicitly use the M selector to keep that part.
Fixes#10378 (certain keymaps missing on image).
* Instead of separate variables, HAIKU_BUILD_TYPE is set to one of
'bootstrap', 'minimum' or 'regular'.
* Adjust uses of HAIKU_BOOTSTRAP_BUILD accordingly.
* This decouples the versions referenced by the architecture-specific
repository file from the actual versions available in the haikuports
branch that happens to be used for the bootstrap build.
When asked to strip binaries when copying to containers we now
strip to a temporary file, copy over resources to it, copy it
to the container, then copy the attributes from the original
source.
This should allow stripping binaries while preserving attributes
and resources even when copying to images.
We now only attempt to strip binaries, by detecting the
LINKFLAGS variable on the targets.
CopySetHaikuRevision now also forwards LINKFLAGS
to revisioned binaries.
Introduce separate AppendToContainerCopyFilesScriptStripFile actions
which are used for copying and stripping, and avoids many useless
shell tests.
When asked to strip binaries, they are detected and handled
individually for simplicity.
Note we still don't keep resources and attributes when stripping.
Currently only needed for boot floppy on some platforms.
Disabled for now.
Note we do not have a mean of knowing which file is a binary
or not so we just try to strip, and silently continue when
strip fails (like on the kernel settings file).
Also note strip actually replaces the file, which means it looses
both the resources and attributes, which shouldn't be a problem
for the boot floppy drivers archive, but is not wanted for other
images, so it's not usable elsewhere as such. Patch wanted.
* rule AddPackageFilesToHaikuImage: Add "flags" parameter. The only
supported flag is "nameFromMetaInfo". It causes the packages to be
copied under their canonical file name onto the image.
* Use the new flag for all generated packages save haiku_loader.hpkg.
* Add "flags" parameter and only supported flag "computeName". When
specified the "destName" argument is the name of a shell command
or function that will be called to determine the destination file
name when the container is built.
* AddFilesToHaikuImage: Pass flags to AddFilesToContainer.
